summaryrefslogtreecommitdiff
path: root/drivers/net/usb/lan78xx.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-08net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-08net: usb: lan78xx: Fixup EEEAndrew Lunn1-20/+22
The enabling/disabling of EEE in the MAC should happen as a result of auto negotiation. So move the enable/disable into lan783xx_phy_link_status_change() which gets called by phylib when there is a change in link status. lan78xx_set_eee() now just programs the hardware with the LPI timer value, and passed everything else to phylib, so it can correctly setup the PHY. lan743x_get_eee() relies on phylib doing most of the work, the MAC driver just adds the LPI timer value. Call phy_support_eee() to indicate the MAC does actually support EEE. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-01net: lan78xx: fix runtime PM count underflow on link stopOleksij Rempel1-1/+2
Current driver has some asymmetry in the runtime PM calls. On lan78xx_open() it will call usb_autopm_get() and unconditionally usb_autopm_put(). And on lan78xx_stop() it will call only usb_autopm_put(). So far, it was working only because this driver do not activate autosuspend by default, so it was visible only by warning "Runtime PM usage count underflow!". Since, with current driver, we can't use runtime PM with active link, execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise, keep ref counting high as long as interface is open. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+4
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28net: lan78xx: fix "softirq work is pending" errorOleksij Rempel1-0/+2
Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #08!!! Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-27lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detectedOleksij Rempel1-1/+2
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit1-2/+2
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-09lan78xx: remove redundant statement in lan78xx_get_eeeHeiner Kallweit1-2/+0
eee_active is set by phy_ethtool_get_eee() already, using the same logic plus an additional check against link speed/duplex values. See genphy_c45_eee_is_active() for details. So we can remove this line. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b086b296-0a1b-42d4-8e2b-ef6682598185@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-17lan78xx: replace deprecated strncpy with strscpyJustin Stitt1-1/+1
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Other implementations of .*get_drvinfo use strscpy so this patch brings lan78xx_get_drvinfo() in line as well: igb/igb_ethtool.c +851 static void igb_get_drvinfo(struct net_device *netdev, igbvf/ethtool.c 167:static void igbvf_get_drvinfo(struct net_device *netdev, i40e/i40e_ethtool.c 1999:static void i40e_get_drvinfo(struct net_device *netdev, e1000/e1000_ethtool.c 529:static void e1000_get_drvinfo(struct net_device *netdev, ixgbevf/ethtool.c 211:static void ixgbevf_get_drvinfo(struct net_device *netdev, Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-usb-lan78xx-c-v1-1-99d513061dfc@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31net: usb: lan78xx: reorder cleanup operations to avoid UAF bugsDuoming Zhou1-5/+2
The timer dev->stat_monitor can schedule the delayed work dev->wq and the delayed work dev->wq can also arm the dev->stat_monitor timer. When the device is detaching, the net_device will be deallocated. but the net_device private data could still be dereferenced in delayed work or timer handler. As a result, the UAF bugs will happen. One racy situation is shown below: (Thread 1) | (Thread 2) lan78xx_stat_monitor() | ... | lan78xx_disconnect() lan78xx_defer_kevent() | ... ... | cancel_delayed_work_sync(&dev->wq); schedule_delayed_work() | ... (wait some time) | free_netdev(net); //free net_device lan78xx_delayedwork() | //use net_device private data | dev-> //use | Although we use cancel_delayed_work_sync() to cancel the delayed work in lan78xx_disconnect(), it could still be scheduled in timer handler lan78xx_stat_monitor(). Another racy situation is shown below: (Thread 1) | (Thread 2) lan78xx_delayedwork | mod_timer() | lan78xx_disconnect() | cancel_delayed_work_sync() (wait some time) | if (timer_pending(&dev->stat_monitor)) | del_timer_sync(&dev->stat_monitor); lan78xx_stat_monitor() | ... lan78xx_defer_kevent() | free_netdev(net); //free //use net_device private data| dev-> //use | Although we use del_timer_sync() to delete the timer, the function timer_pending() returns 0 when the timer is activated. As a result, the del_timer_sync() will not be executed and the timer could be re-armed. In order to mitigate this bug, We use timer_shutdown_sync() to shutdown the timer and then use cancel_delayed_work_sync() to cancel the delayed work. As a result, the net_device could be deallocated safely. What's more, the dev->flags is set to EVENT_DEV_DISCONNECT in lan78xx_disconnect(). But it could still be set to EVENT_STAT_UPDATE in lan78xx_stat_monitor(). So this patch put the set_bit() behind timer_shutdown_sync(). Fixes: 77dfff5bb7e2 ("lan78xx: Fix race condition in disconnect handling") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: usb: lan78xx: Limit packet length to skb->lenSzymon Heidrich1-1/+17
Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents. Additionally prevent integer underflow when size is less than ETH_FCS_LEN. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-03net: lan78xx: fix accessing the LAN7800's internal phy specific registers ↵Yuiko Oshino1-26/+1
from the MAC driver Move the LAN7800 internal phy (phy ID 0x0007c132) specific register accesses to the phy driver (microchip.c). Fix the error reported by Enguerrand de Ribaucourt in December 2022, "Some operations during the cable switch workaround modify the register LAN88XX_INT_MASK of the PHY. However, this register is specific to the LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801, that register (0x19), corresponds to the LED and MAC address configuration, resulting in unapropriate behavior." I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800 with the internal PHY. Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski1-1/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski1-1/+1
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29usb: lan78xx: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski1-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23net: remove third argument of usb_maxpacket()Vincent Mailhol1-2/+2
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Oliver Neukum <oliver@neukum.org> CC: David S. Miller <davem@davemloft.net> CC: Jakub Kicinski <kuba@kernel.org> CC: Woojung Huh <woojung.huh@microchip.com> CC: Felix Fietkau <nbd@nbd.name> CC: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> CC: Ryder Lee <ryder.lee@mediatek.com> CC: Kalle Valo <kvalo@kernel.org> CC: Matthias Brugger <matthias.bgg@gmail.com> CC: Stanislaw Gruszka <stf_xl@wp.pl> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-6-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03net: usb: lan78xx: Use generic_handle_irq_safe().Sebastian Andrzej Siewior1-5/+2
Instead of manually disabling interrupts before invoking use generic_handle_irq_safe() which can be invoked with enabled and disabled interrupts. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: UNGLinuxDriver@microchip.com Link: https://lore.kernel.org/r/20220211181500.1856198-7-bigeasy@linutronix.de
2021-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+6
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net: usb: lan78xx: add Allied Telesis AT29M2-AFGreg Jesionowski1-0/+6
This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com> Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ ↵Sven Schuchmann1-1/+1
is available On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-24lan78xx: Clean up some inconsistent indentingJiapeng Chong1-2/+1
Eliminate the follow smatch warning: drivers/net/usb/lan78xx.c:4961 lan78xx_resume() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18lan78xx: Introduce NAPI polling supportJohn Efstathiades1-68/+114
This patch introduces a NAPI-style approach for processing completed Rx URBs that contributes to improving driver throughput and reducing CPU load. Packets in completed URBs are copied to NAPI SKBs and passed to the network stack for processing. Each frame passed to the stack is one work item in the NAPI budget. If the NAPI budget is consumed and frames remain, they are added to an overflow queue that is processed at the start of the next NAPI polling cycle. The NAPI handler is also responsible for copying pending Tx data to Tx URBs and submitting them to the USB host controller for transmission. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18lan78xx: Remove hardware-specific header updateJohn Efstathiades1-35/+16
Remove hardware-specific header length adjustment as it is no longer required. It also breaks generic receive offload (GRO) processing of received TCP frames that results in a TCP ACK being sent for each received frame. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18lan78xx: Re-order rx_submit() to remove forward declarationJohn Efstathiades1-54/+52
Move position of rx_submit() to remove forward declaration of rx_complete() which is now no longer required. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18lan78xx: Introduce Rx URB processing improvementsJohn Efstathiades1-116/+166
This patch introduces a new approach to allocating and managing Rx URBs that contributes to improving driver throughput and reducing CPU load. A pool of Rx URBs is created during driver instantiation. All the URBs are initially submitted to the USB host controller for processing. The default URB buffer size is different for each USB bus speed. The chosen sizes provide good USB utilisation with little impact on overall packet latency. Completed URBs are processed in the driver bottom half. The URB buffer contents are copied to a dynamically allocated SKB, which is then passed to the network stack. The URB is then re-submitted to the USB host controller. NOTE: the call to skb_copy() in rx_process() that copies the URB contents to a new SKB is a temporary change to make this patch work in its own right. This call will be removed when the NAPI processing is introduced by patch 6 in this patch set. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18lan78xx: Introduce Tx URB processing improvementsJohn Efstathiades1-213/+461
This patch introduces a new approach to allocating and managing Tx URBs that contributes to improving driver throughput and reducing CPU load. A pool of Tx URBs is created during driver instantiation. A URB is allocated from the pool when there is data to transmit. The URB is released back to the pool when the data has been transmitted by the device. The default URB buffer size is different for each USB bus speed. The chosen sizes provide good USB utilisation with little impact on overall packet latency. SKBs to be transmitted are added to a pending queue for processing. The driver tracks the available Tx URB buffer space and copies as much pending data as possible into each free URB. Each full URB is then submitted to the USB host controller for transmission. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18lan78xx: Fix memory allocation bugJohn Efstathiades1-17/+21
Fix memory allocation that fails to check for NULL return. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+6
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26net: lan78xx: fix division by zero in send pathJohan Hovold1-0/+6
Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: usb: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-2/+2
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert net/usb from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Limit number of driver warning messagesJohn Efstathiades1-2/+3
Device removal can result in a large burst of driver warning messages (20 - 30) sent to the kernel log. Most of these are register read/write failures. This change limits the rate at which these messages are emitted. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix race condition in disconnect handlingJohn Efstathiades1-9/+57
If there is a device disconnect at roughly the same time as a deferred PHY link reset there is a race condition that can result in a kernel lock up due to a null pointer dereference in the driver's deferred work handling routine lan78xx_delayedwork(). The following changes fix this problem. Add new status flag EVENT_DEV_DISCONNECT to indicate when the device has been removed and use it to prevent operations, such as register access, that will fail once the device is removed. Stop processing of deferred work items when the driver's USB disconnect handler is invoked. Disconnect the PHY only after the network device has been unregistered and all delayed work has been cancelled. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix race conditions in suspend/resume handlingJohn Efstathiades1-135/+284
If the interface is given an IP address while the device is suspended (as a result of an auto-suspend event) there is a race between lan78xx_resume() and lan78xx_open() that can result in an exception or failure to handle incoming packets. The following changes fix this problem. Introduce a mutex to serialise operations in the network interface open and stop entry points with respect to the USB driver suspend and resume entry points. Move Tx and Rx data path start/stop to lan78xx_start() and lan78xx_stop() respectively and flush the packet FIFOs before starting the Tx and Rx data paths. This prevents the MAC and FIFOs getting out of step and delivery of malformed packets to the network stack. Stop processing of received packets before disconnecting the PHY from the MAC to prevent a kernel exception caused by handling packets after the PHY device has been removed. Refactor device auto-suspend code to make it consistent with the the system suspend code and make the suspend handler easier to read. Add new code to stop wake-on-lan packets or PHY events resuming the host or device from suspend if the device has not been opened (typically after an IP address is assigned). This patch is dependent on changes to lan78xx_suspend() and lan78xx_resume() introduced in the previous patch of this patch set. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix partial packet errors on suspend/resumeJohn Efstathiades1-106/+197
The MAC can get out of step with the internal packet FIFOs if the system goes to sleep when the link is active, especially at high data rates. This can result in partial frames in the packet FIFOs that in result in malformed frames being delivered to the host. This occurs because the driver does not enable/disable the internal packet FIFOs in step with the corresponding MAC data path. The following changes fix this problem. Update code that enables/disables the MAC receiver and transmitter to the more general Rx and Tx data path, where the data path in each direction consists of both the MAC function (Tx or Rx) and the corresponding packet FIFO. In the receive path the packet FIFO must be enabled before the MAC receiver but disabled after the MAC receiver. In the transmit path the opposite is true: the packet FIFO must be enabled after the MAC transmitter but disabled before the MAC transmitter. The packet FIFOs can be flushed safely once the corresponding data path is stopped. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix exception on link speed changeJohn Efstathiades1-6/+48
An exception is sometimes seen when the link speed is changed from auto-negotiation to a fixed speed, or vice versa. The exception occurs when the MAC is reset (due to the link speed change) at the same time as the PHY state machine is accessing a PHY register. The following changes fix this problem. Rework the MAC reset to ensure there is no outstanding MDIO register transaction before the reset and then wait until the reset is complete before allowing any further MAC register access. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Add missing return code checksJohn Efstathiades1-66/+333
There are many places in the driver where the return code from a function call is captured but without a subsequent test of the return code and appropriate action taken. This patch adds the missing return code tests and action. In most cases the action is an early exit from the calling function. The function lan78xx_set_suspend() was also updated to make it consistent with lan78xx_suspend(). Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Remove unused pause frame queueJohn Efstathiades1-9/+0
Remove the pause frame queue from the driver. It is initialised but not actually used. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Set flow control threshold to prevent packet lossJohn Efstathiades1-2/+15
Set threshold at which flow control is triggered to 3/4 full of the internal Rx packet FIFO to prevent packet drops at high data rates. The new setting reduces the number of dropped UDP frames and TCP retransmit requests especially on less capable CPUs. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Remove unused timerJohn Efstathiades1-3/+1
Remove kernel timer that is not used by the driver. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix white space and style issuesJohn Efstathiades1-38/+42
Fix white space and code style issues identified by checkpatch. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+12
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-04net: usb: lan78xx: don't modify phy_device state concurrentlyIvan T. Ivanov1-4/+12
Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02net: usb: Fix spelling mistakesZheng Yongjun1-1/+1
wierdness ==> weirdness multicat ==> multicast limite ==> limit adddress ==> address operater ==> operator intial ==> initial smaler ==> smaller Communcation ==> Communication funcitons ==> functions everytime ==> every time Neigbor ==> Neighbor performace ==> performance Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: lan78xx: advertise tx software timestamping supportMarkus Bloechl1-0/+1
lan78xx already calls skb_tx_timestamp() in its lan78xx_start_xmit(). Override .get_ts_info to also advertise this capability (SOF_TIMESTAMPING_TX_SOFTWARE) via ethtool. Signed-off-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26net: usb: lan78xx: remove unused including <linux/version.h>Zheng Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-03net: usb: lan78xx: use new tasklet APIEmil Renner Berthing1-3/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 10:10:06 +0300