summaryrefslogtreecommitdiff
path: root/drivers/net/qlcnic/qlcnic_ctx.c
AgeCommit message (Collapse)AuthorFilesLines
2010-12-03qlcnic: LICENSE file for qlcnicSritej Velaga1-20/+3
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qlcnic: avoid using reset_devices as it may become obsolete.Rajesh Borundia1-1/+3
In kdump environment do not depend upon reset_devices parameter to reset the pci function as this parameter may become obsolete. Instead use an adapter specific mechanism to determine if the pci function needs to be reset. Per function refcount is maintained in driver, which is set in probe and reset in remove handler of adapter. If the probe detects the count as non zero then reset the function. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Fix for kdumpRajesh Borundia1-0/+3
In case of kdump environment the function may be in unknown state. Reset the function using PCI FLR before initializing it. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05qlcnic: remove dead codestephen hemminger1-169/+0
This driver has several pieces of dead code (found by running make namespacecheck). This patch removes them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05qlcnic: sparse warning fixesSucheta Chakraborty1-6/+6
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05qlcnic: fix eswitch statsAmit Kumar Salecha1-9/+22
Some of the counters are not implemented in fw. Fw return NOT AVAILABLE VALUE as (0xffffffffffffffff). Adding these counters, result in invalid value. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01qlcnic: fix mac override capabilityRajesh Borundia1-6/+7
o Rename mac_learning to mac_override o Added check in set_mac to return error if mac override is disabled. o Disabling mac_override only supported for Non priviledged functions. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26qlcnic: eswitch config fixesRajesh Borundia1-0/+1
o remove validation before deleting vlan id o Add missing 'break' while deleting vlan id. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-20qlcnic: fix endiness in eswitch statisticsAmit Kumar Salecha1-2/+16
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-20qlcnic: configure port on eswitchRajesh Borundia1-44/+130
o Nic partition capable devices has embedded switch, this needs to support various features like external switch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17qlcnic: add eswitch statistics supportAmit Kumar Salecha1-0/+125
Adding eswitch statistics support. User can get whole eswitch stats or stats of func belong to that eswitch. Added: o command to get statistics of eswitch and function. o sysfs support to export eswitch and func statatistics. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15qlcnic: restore NPAR config data after recoveryAnirban Chakraborty1-0/+2
o NPAR configuration which is programmed in fw, need to restore after fw recovery. o Update version to 5.0.7 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30qlcnic: Add support for configuring eswitch and nparsRajesh K Borundia1-65/+25
Following changes are made: 1.Obtain capabilities of Nic partition. 2.Configure tx bandwidth of particular Nic partition. 3.Configure the eswitch for setting port mirroring, enable mac learning, promiscous mode. Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30qlcnic: Remove obsolete codeAnirban Chakraborty1-22/+4
Current driver uses FW API version 2 and thus code corresponding to FW API version 1 has become obsolete. Clean up this from the driver. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qlcnic: mark context state freed after destroyAmit Kumar Salecha1-0/+2
After destroying recv ctx, context state remain same. Fix it by marking as FREED. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qlcnic: release device resources during interface downAmit Kumar Salecha1-15/+35
Previously we were allocating device resources during probe and release them during remove. Now alloc during interface up and release in interface down. This helps in device performance, as it doesn't need to keep track of inactive resources. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17qlcnic: seperate interrupt for TXschacko1-1/+6
Earlier all poll routine can process rx and tx, But now one poll routine to process rx + tx and other for rx only. Last msix vector will be used for separate tx interrupt. o This is supported from fw version 4.4.2. o Bump version 5.0.5 Signed-off-by: Sony Chacko <schacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17qlcnic: change driver descriptionSritej Velaga1-3/+2
o Remove extra printing of mac address o This driver also supports NIC only Qlogic adapters. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17qlcnic: Fix a bug in setting up NIC partitioning modeAnirban Chakraborty1-0/+5
The driver was not detecting the presence of NIC partitioning capability of the firmware properly. Now, it checks the eswitch set bit in the FW capabilities register and accordingly sets the driver mode as NPAR capable or not. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02qlcnic: NIC Partitioning - Add basic infrastructure supportAnirban Chakraborty1-19/+494
Following changes have been added to enable the adapter to work in NIC partitioning mode where multiple PCI functions of an adapter port can be configured to work as NIC functions. The first function that is enumerated on the PCI bus assumes the role of management function which, besides being able to do all the NIC functionality, can configure other NIC partitions. Other NIC functions can be configured as privileged or non privileged functions. Privileged function can not configure other NIC functions but can do all the NIC functionality including any firmware initialization, chip reset etc. Non privileged functions can do only basic IO. For chip reset etc, it depends on the privilege or management function. 1. Added code to determine PCI function number independent of kernel API. 2. Added Driver - FW version 2.0 support. 3. Changed producer and consumer register offset calculation. 4. Added management and privileged operation modes for npar functions. A module parameter has been added to control it. 5. Added support for configuring the eswitch in the adapter. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: fix memory leaksAnirban Chakraborty1-1/+2
Fixes memory leak in error path when memory allocation for adapter data structures fails. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03qlcnic: add interrupt diagnostic testAmit Kumar Salecha1-3/+1
Interrupt test (offline) added in ethtool self test. Register a temporary interrupt handler and then send command to fw to raise an interrupt. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16qlcnic: Qlogic ethernet driver for CNA devicesAmit Kumar Salecha1-0/+536
o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 16:29:33 +0300