summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
2022-06-22net: phy: smsc: Deduplicate interrupt acknowledgement upon phy_init_hw()Lukas Wunner1-12/+1
Since commit 4c0d2e96ba05 ("net: phy: consider that suspend2ram may cut off PHY power"), phy_init_hw() invokes both, the ->config_init() and ->config_intr() callbacks. In the SMSC PHY driver, the latter acknowledges stale interrupts, hence there's no longer a need to acknowledge them in the former as well. There are no other callers of ->config_init() besides phy_init_hw(). Drop the redundant code. Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/0254edf48bddc96c6248c4414043a3699e94614a.1655716767.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-19net: phy: at803x: fix NULL pointer dereference on AR9331 PHYOleksij Rempel1-0/+6
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-19net: phy: marvell: use mii_bmcr_encode_fixed()Russell King (Oracle)1-8/+2
Make use of the newly introduced mii_bmcr_encode_fixed() to get the BMCR value when setting loopback mode for the 88e1510. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-19net: phy: use mii_bmcr_encode_fixed()Russell King (Oracle)1-15/+3
phylib can make use of the newly introduced mii_bmcr_encode_fixed() macro, so let's convert it over. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17net: phy: add support to get Master-Slave configurationRaju Lakkaraju1-0/+3
Add support to Master-Slave configuration and state Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17net: phy: dp83867: implement support for io_impedance_ctrl nvmem cellRasmus Villemoes1-6/+49
We have a board where measurements indicate that the current three options - leaving IO_IMPEDANCE_CTRL at the (factory calibrated) reset value or using one of the two boolean properties to set it to the min/max value - are too coarse. Implement support for the newly added binding allowing device tree to specify an nvmem cell containing an appropriate value for this specific board. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17phy: aquantia: Fix AN when higher speeds than 1G are not advertisedClaudiu Manoil1-1/+14
Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-15net: phy: marvell-88x2222: set proper phydev->portIvan Bornyakov1-0/+2
phydev->port was not set and always reported as PORT_TP. Set phydev->port according to inserted SFP module. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-14net: phy: fixed_phy: set phy_mask before calling mdiobus_register()Rasmus Villemoes1-0/+1
There's no point probing for phys on this artificial bus, so we can save a little bit of boot time by telling mdiobus_register() not to do that. This doesn't have any functional change, since, at this point, fixed_mdio_read() returns 0xffff for all addresses/registers, so mdiobus_scan() -> get_phy_device() -> get_phy_c22_id() will return -ENODEV, which is just ignored. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220606200208.1665417-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: mdio: unexport __init-annotated mdio_bus_init()Masahiro Yamada1-1/+0
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06net: phy: dp83867: retrigger SGMII AN when link changeTan Tee Min1-0/+29
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-31net: phy: at803x: disable WOL at probeViorel Suman1-11/+22
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch "at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose. The problem here is that the values of these two bits are different after hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will set WAKE_MAGIC flag, even if WOL function is not enabled by calling "at803x_set_wol" function. The patch disables WOL function on probe thus the behavior is consistent. Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/20220527084935.235274-1-viorel.suman@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-28net: phy: Directly use ida_alloc()/free()Ke Liu1-3/+3
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove(). Signed-off-by: Ke Liu <liuke94@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: phy: DP83822: enable rgmii mode if phy_interface_is_rgmiiTommaso Merciai1-1/+8
RGMII mode can be enable from dp83822 straps, and also writing bit 9 of register 0x17 - RMII and Status Register (RCSR). When phy_interface_is_rgmii rgmii mode must be enabled, same for contrary, this prevents malconfigurations of hw straps References: - https://www.ti.com/lit/gpn/dp83822i p66 Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Suggested-by: Alberto Bianchi <alberto.bianchi@amarulasolutions.com> Tested-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-19net: phy: adin: add support for clock outputJosua Mayer1-0/+40
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. SyncE should be configured dynamically at runtime, however Linux does not currently have a toggle for this, so support is explicitly omitted. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer<josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net: phy: marvell: Add errata section 5.1 for Alaska PHYLeszek Polak1-0/+37
As per Errata Section 5.1, if EEE is intended to be used, some register writes must be done once after every hardware reset. This patch now adds the necessary register writes as listed in the Marvell errata. Without this fix we experience ethernet problems on some of our boards equipped with a new version of this ethernet PHY (different supplier). The fix applies to Marvell Alaska 88E1510/88E1518/88E1512/88E1514 Rev. A0. Signed-off-by: Leszek Polak <lpolak@arri.de> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220516070859.549170-1-sr@denx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-16net: phy: micrel: Use the kszphy probe/suspend/resumeFabio Estevam1-2/+3
Now that it is possible to use .probe without having .driver_data, let KSZ8061 use the kszphy specific hooks for probe,suspend and resume, which is preferred. Switch to using the dedicated kszphy probe/suspend/resume functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-2-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16net: phy: micrel: Allow probing without .driver_dataFabio Estevam1-5/+6
Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13net: phy: smsc: Cope with hot-removal in interrupt handlerLukas Wunner1-1/+3
If reading the Interrupt Source Flag register fails with -ENODEV, then the PHY has been hot-removed and the correct response is to bail out instead of throwing a WARN splat and attempting to suspend the PHY. The PHY should be stopped in due course anyway as the kernel asynchronously tears down the device. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13net: phy: smsc: Cache interrupt maskLukas Wunner1-13/+11
Cache the interrupt mask to avoid re-reading it from the PHY upon every interrupt. This will simplify a subsequent commit which detects hot-removal in the interrupt handler and bails out. Analyzing and debugging PHY transactions also becomes simpler if such redundant reads are avoided. Last not least, interrupt overhead and latency is slightly improved. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-6/+11
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11net: phy: smsc: add comments for the LAN8742 phy ID mask.Yuiko Oshino1-1/+5
add comments for the LAN8742 phy ID mask in the previous patch. add one missing tab in the LAN8742 phy ID line. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11net: phy: microchip: add comments for the modified LAN88xx phy ID mask.Yuiko Oshino1-0/+4
add comments for the updated LAN88xx phy ID mask in the previous patch. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11net: phy: micrel: Fix incorrect variable type in micrelWan Jiabing1-3/+2
In lanphy_read_page_reg, calling __phy_read() might return a negative error code. Use 'int' to check the error code. Fixes: 7c2dcfa295b1 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220509144519.2343399-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-10net: phy: Fix race condition on link status changeFrancesco Dolcini1-1/+6
This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: <stable@vger.kernel.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09net: phy: smsc: add LAN8742 phy support.Yuiko Oshino1-0/+27
The current phy IDs on the available hardware. LAN8742 0x0007C130, 0x0007C131 Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: microchip: update LAN88xx phy ID and phy ID mask.Yuiko Oshino1-3/+3
update LAN88xx phy ID and phy ID mask because the existing code conflicts with the LAN8742 phy. The current phy IDs on the available hardware. LAN8742 0x0007C130, 0x0007C131 LAN88xx 0x0007C132 Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHYOleksij Rempel3-0/+216
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver that supports 10M single pair cable. This driver was tested with NXP SJA1105, STMMAC and ASIX AX88772B USB Ethernet controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: export genphy_c45_baset1_read_status()Oleksij Rempel1-1/+2
Export genphy_c45_baset1_read_status() to make it reusable by PHY drivers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configurationOleksij Rempel1-2/+6
Since MDIO_PMA_PMD_BT1_CTRL register shows actual configuration (and forced state configuration is equal to the state), we should show this configuration for ethtool. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: introduce genphy_c45_pma_baset1_read_master_slave()Oleksij Rempel1-6/+25
Move baset1 specific part of genphy_c45_read_pma() code to separate function to make it reusable by PHY drivers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown ↵Oleksij Rempel1-1/+2
configuration Do not change default master/slave forced configuration if no changes was requested. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()Oleksij Rempel1-19/+30
Move baset1 specific part of genphy_c45_pma_setup_forced() code to separate function to make it reusable by PHY drivers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configurationOleksij Rempel1-1/+5
Do not change default master/slave autoneg configuration if no changes was requested. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: phy: micrel: Pass .probe for KS8737Fabio Estevam1-0/+1
Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/ resume hooks are used. These functions require the probe function to be called so that priv can be allocated. Otherwise, a NULL pointer dereference happens inside kszphy_config_reset(). Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061Fabio Estevam1-2/+2
Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+11
tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONTMatthew Hagan1-1/+11
As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled. This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function. Change from v1: removal of erroneous return statment (Andrew Lunn) Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-02net: phy: bcm87xx: Use mmd helpersAndrew Lunn1-16/+20
Rather than construct special phy device addresses to access C45 registers, use the mmd helpers. These will directly call the C45 API of the MDIO bus driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02net: phy: Convert to mdiobus_c45_{read|write}Andrew Lunn1-7/+11
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02net: phylink: Convert to mdiobus_c45_{read|write}Andrew Lunn1-15/+17
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-01net: phy: adin1100: Add SQI supportAlexandru Tachici1-0/+52
Determine the SQI from MSE using a predefined table for the 10BASE-T1L. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: adin1100: Add initial support for ADIN1100 industrial PHYAlexandru Ardelean3-0/+248
The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: Add 10BASE-T1L support in phy-c45Alexandru Tachici2-5/+253
This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01ethtool: Add 10base-T1L link mode entryAlexandru Tachici3-3/+7
Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: marvell: update abilities and advertising when switching to SGMIIRobert Hancock1-1/+15
With some SFP modules, such as Finisar FCLF8522P2BTL, the PHY hardware strapping defaults to 1000BaseX mode, but the kernel prefers to set them for SGMII mode. When this happens and the PHY is soft reset, the BMSR status register is updated, but this happens after the kernel has already read the PHY abilities during probing. This results in support not being detected for, and the PHY not advertising support for, 10 and 100 Mbps modes, preventing the link from working with a non-gigabit link partner. When the PHY is being configured for SGMII mode, call genphy_read_abilities again in order to re-read the capabilities, and update the advertising field accordingly. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: phy: micrel: add coma mode GPIOMichael Walle1-0/+20
The LAN8814 has a coma mode pin which puts the PHY into isolate and power-dowm mode. Unfortunately, the mode cannot be disabled by a register. Usually, the input pin has a pull-up and connected to a GPIO which can then be used to disable the mode. Try to get the GPIO and deassert it. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-30net: phy: micrel: move the PHY timestamping checkMichael Walle1-4/+8
Both lan8814_ptp_init() and lan8814_ptp_probe_once() are only used if PTP and PHY timestamping is enabed. Up until now the probe function just returns early, if they are not needed. But we need the phy_package_init_once() functionality for the coma mode GPIO setup. Move the check into the functions itself. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29net: phy: Deduplicate interrupt disablement on PHY attachLukas Wunner1-4/+2
phy_attach_direct() first calls phy_init_hw() (which restores interrupt settings through ->config_intr()), then calls phy_disable_interrupts(). So if phydev->interrupts was previously set to 1, interrupts are briefly enabled, then disabled, which seems nonsensical. If it was previously set to 0, interrupts are disabled twice, which is equally nonsensical. Deduplicate interrupt disablement. Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/805ccdc606bd8898d59931bd4c7c68537ed6e550.1651040826.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 02:01:32 +0300