summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
2023-10-25net: phy: mscc: macsec: reject PN update requestsRadu Pirea (NXP OSS)1-0/+6
[ Upstream commit e0a8c918daa58700609ebd45e3fcd49965be8bbc ] Updating the PN is not supported. Return -EINVAL if update_pn is true. The following command succeeded, but it should fail because the driver does not update the PN: ip macsec set macsec0 tx sa 0 pn 232 on Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26net: phy: broadcom: stub c45 read/write for 54810Justin Chen1-0/+13
[ Upstream commit 096516d092d54604d590827d05b1022c8f326639 ] The 54810 does not support c45. The mmd_phy_indirect accesses return arbirtary values leading to odd behavior like saying it supports EEE when it doesn't. We also see that reading/writing these non-existent MMD registers leads to phy instability in some cases. Fixes: b14995ac2527 ("net: phy: broadcom: Add BCM54810 PHY entry") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16net: phy: at803x: remove set/get wol callbacks for AR8032Li Yang1-2/+0
commit d7791cec2304aea22eb2ada944e4d467302f5bfe upstream. Since the AR8032 part does not support wol, remove related callbacks from it. Fixes: 5800091a2061 ("net: phy: at803x: add support for AR8032 PHY") Signed-off-by: Li Yang <leoyang.li@nxp.com> Cc: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11net: phy: marvell10g: fix 88x3310 power upJiawen Wu1-0/+7
[ Upstream commit c7b75bea853daeb64fc831dbf39a6bbabcc402ac ] Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY, it sometimes does not take effect immediately. And a read of this register causes the bit not to clear. This will cause mv3310_reset() to time out, which will fail the config initialization. So add a delay before the next access. Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27net: phy: prevent stale pointer dereference in phy_init()Vladimir Oltean1-7/+14
[ Upstream commit 1c613beaf877c0c0d755853dc62687e2013e55c4 ] mdio_bus_init() and phy_driver_register() both have error paths, and if those are ever hit, ethtool will have a stale pointer to the phy_ethtool_phy_ops stub structure, which references memory from a module that failed to load (phylib). It is probably hard to force an error in this code path even manually, but the error teardown path of phy_init() should be the same as phy_exit(), which is now simply not the case. Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations") Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/ Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28Revert "net: phy: dp83867: perform soft reset and retain established link"Francesco Dolcini1-1/+1
[ Upstream commit a129b41fe0a8b4da828c46b10f5244ca07a3fec3 ] This reverts commit da9ef50f545f86ffe6ff786174d26500c4db737a. This fixes a regression in which the link would come up, but no communication was possible. The reverted commit was also removing a comment about DP83867_PHYCR_FORCE_LINK_GOOD, this is not added back in this commits since it seems that this is unrelated to the original code change. Closes: https://lore.kernel.org/all/ZGuDJos8D7N0J6Z2@francesco-nb.int.toradex.com/ Fixes: da9ef50f545f ("net: phy: dp83867: perform soft reset and retain established link") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Praneeth Bajjuri <praneeth@ti.com> Link: https://lore.kernel.org/r/20230619154435.355485-1-francesco@dolcini.it Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-05net: phy: mscc: enable VSC8501/2 RGMII RX clockDavid Epping2-26/+29
[ Upstream commit 71460c9ec5c743e9ffffca3c874d66267c36345e ] By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is disabled. To allow packet forwarding towards the MAC it needs to be enabled. For other PHYs supported by this driver the clock output is enabled by default. Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLEDavid Epping1-0/+1
commit 57fb54ab9f6945e204740b696bd4cee61ee04e5e upstream. The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30net: phy: dp83867: add w/a for packet errors seen with short cablesGrygorii Strashko1-1/+21
[ Upstream commit 0b01db274028f5acd207332686ffc92ac77491ac ] Introduce the W/A for packet errors seen with short cables (<1m) between two DP83867 PHYs. The W/A recommended by DM requires FFE Equalizer Configuration tuning by writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard and soft resets as follows: write_reg(0x001F, 0x8000); //hard reset write_reg(DSP_FFE_CFG, 0x0E81); write_reg(0x001F, 0x4000); //soft reset Since DP83867 PHY DM says "Changing this register to 0x0E81, will not affect Long Cable performance.", enable the W/A by default. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-20net: sfp: initialize sfp->i2c_block_size at sfp allocationIvan Bornyakov1-5/+8
commit 813c2dd78618f108fdcf9cd726ea90f081ee2881 upstream. sfp->i2c_block_size is initialized at SFP module insertion in sfp_sm_mod_probe(). Because of that, if SFP module was never inserted since boot, sfp_read() call will lead to zero-length I2C read attempt, and not all I2C controllers are happy with zero-length reads. One way to issue sfp_read() on empty SFP cage is to execute ethtool -m. If SFP module was never plugged since boot, there will be a zero-length I2C read attempt. # ethtool -m xge0 i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read) Cannot get Module EEPROM data: Operation not supported If SFP module was plugged then removed at least once, sfp->i2c_block_size will be initialized and ethtool -m will fail with different exit code and without I2C error # ethtool -m xge0 Cannot get Module EEPROM data: Remote I/O error Fix this by initializing sfp->i2_block_size at struct sfp allocation stage so no wild sfp_read() could issue zero-length I2C read. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround") Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05net: phy: dp83869: fix default value for tx-/rx-internal-delayJosua Mayer1-4/+2
commit 82e2c39f9ef78896e9b634dfd82dc042e6956bb7 upstream. dp83869 internally uses a look-up table for mapping supported delays in nanoseconds to register values. When specific delays are defined in device-tree, phy_get_internal_delay does the lookup automatically returning an index. The default case wrongly assigns the nanoseconds value from the lookup table, resulting in numeric value 2000 applied to delay configuration register, rather than the expected index values 0-7 (7 for 2000). Ultimately this issue broke RX for 1Gbps links. Fix default delay configuration by assigning the intended index value directly. Cc: stable@vger.kernel.org Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Co-developed-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323102536.31988-1-josua@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05net: mdio: fix owner field for mdio buses registered using device-treeMaxime Bizon1-5/+6
[ Upstream commit 99669259f3361d759219811e670b7e0742668556 ] Bus ownership is wrong when using of_mdiobus_register() to register an mdio bus. That function is not inline, so when it calls mdiobus_register() the wrong THIS_MODULE value is captured. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") [florian: fix kdoc, added Fixes tag] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05net: phy: Ensure state transitions are processed from phy_stop()Florian Fainelli1-7/+16
[ Upstream commit 4203d84032e28f893594a453bd8bc9c3b15c7334 ] In the phy_disconnect() -> phy_stop() path, we will be forcibly setting the PHY state machine to PHY_HALTED. This invalidates the old_state != phydev->state condition in phy_state_machine() such that we will neither display the state change for debugging, nor will we invoke the link_change_notify() callback. Factor the code by introducing phy_process_state_change(), and ensure that we process the state change from phy_stop() as well. Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22net: phy: smsc: bail out in lan87xx_read_status if genphy_read_status failsHeiner Kallweit1-1/+4
[ Upstream commit c22c3bbf351e4ce905f082649cffa1ff893ea8c1 ] If genphy_read_status fails then further access to the PHY may result in unpredictable behavior. To prevent this bail out immediately if genphy_read_status fails. Fixes: 4223dbffed9f ("net: phy: smsc: Re-enable EDPD mode for LAN87xx") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17net: phylib: get rid of unnecessary lockingRussell King (Oracle)1-7/+1
[ Upstream commit f4b47a2e9463950df3e7c8b70e017877c1d4eb11 ] The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa810e ("net: phy: add core phylib sfp support") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17net: lan78xx: fix accessing the LAN7800's internal phy specific registers ↵Yuiko Oshino1-0/+32
from the MAC driver [ Upstream commit e57cf3639c323eeed05d3725fd82f91b349adca8 ] Move the LAN7800 internal phy (phy ID 0x0007c132) specific register accesses to the phy driver (microchip.c). Fix the error reported by Enguerrand de Ribaucourt in December 2022, "Some operations during the cable switch workaround modify the register LAN88XX_INT_MASK of the PHY. However, this register is specific to the LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801, that register (0x19), corresponds to the LED and MAC address configuration, resulting in unapropriate behavior." I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800 with the internal PHY. Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-15net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHYHeiner Kallweit1-0/+2
[ Upstream commit 69ff53e4a4c9498eeed7d1441f68a1481dc69251 ] Jerome provided the information that also the GXL internal PHY doesn't support MMD register access and EEE. MMD reads return 0xffff, what results in e.g. completely wrong ethtool --show-eee output. Therefore use the MMD dummy stubs. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-15net: phy: meson-gxl: Add generic dummy stubs for MMD register accessChris Healy1-0/+2
[ Upstream commit afc2336f89dc0fc0ef25b92366814524b0fd90fb ] The Meson G12A Internal PHY does not support standard IEEE MMD extended register access, therefore add generic dummy stubs to fail the read and write MMD calls. This is necessary to prevent the core PHY code from erroneously believing that EEE is supported by this PHY even though this PHY does not support EEE, as MMD register access returns all FFFFs. Fixes: 5c3407abb338 ("net: phy: meson-gxl: add g12a support") Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Chris Healy <healych@amazon.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230130231402.471493-1-cphealy@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-15net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devicesAndre Kalb1-2/+4
[ Upstream commit 422ae7d9c7221e8d4c8526d0f54106307d69d2dc ] The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that. Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Andre Kalb <andre.kalb@sma.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/Y9FzniUhUtbaGKU7@pc6682 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: mdio: validate parameter addr in mdiobus_get_phy()Heiner Kallweit1-1/+6
[ Upstream commit 867dbe784c5010a466f00a7d1467c1c5ea569c75 ] The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it. Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probeMiaoqian Lin1-0/+1
[ Upstream commit d039535850ee47079d59527e96be18d8e0daa84b ] of_phy_find_device() return device node with refcount incremented. Call put_device() to relese it when not needed anymore. Fixes: ab4e6ee578e8 ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08net: phy: fix null-ptr-deref while probe() failedYang Yingliang1-0/+1
[ Upstream commit 369eb2c9f1f72adbe91e0ea8efb130f0a2ba11a6 ] I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: phy: mscc: macsec: clear encryption keys when freeing a flowAntoine Tenart1-0/+1
[ Upstream commit 1b16b3fdf675cca15a537572bac50cc5354368fc ] Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the MSCC PHY driver made a copy, kept it in the flow data and did not clear it when freeing a flow. Fix this. Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: mdio: fix undefined behavior in bit shift for __mdiobus_registerGaosheng Cui1-1/+1
[ Upstream commit 40e4eb324c59e11fcb927aa46742d28aba6ecb8a ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK> Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-30net: phy: dp83822: disable MDI crossover status change interruptFelix Riemann1-2/+1
[ Upstream commit 7f378c03aa4952507521174fb0da7b24a9ad0be6 ] If the cable is disconnected the PHY seems to toggle between MDI and MDI-X modes. With the MDI crossover status interrupt active this causes roughly 10 interrupts per second. As the crossover status isn't checked by the driver, the interrupt can be disabled to reduce the interrupt load. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Felix Riemann <felix.riemann@sma.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-30net: phy: dp83867: Extend RX strap quirk for SGMII modeHarini Katakam1-0/+8
[ Upstream commit 0c9efbd5c50c64ead434960a404c9c9a097b0403 ] When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28net: phy: aquantia: wait for the suspend/resume operations to finishIoana Ciornei1-4/+49
[ Upstream commit ca2dccdeeb49a7e408112d681bf447984c845292 ] The Aquantia datasheet notes that after issuing a Processor-Intensive MDIO operation, like changing the low-power state of the device, the driver should wait for the operation to finish before issuing a new MDIO command. The new aqr107_wait_processor_intensive_op() function is added which can be used after these kind of MDIO operations. At the moment, we are only adding it at the end of the suspend/resume calls. The issue was identified on a board featuring the AQR113C PHY, on which commands like 'ip link (..) up / down' issued without any delays between them would render the link on the PHY to remain down. The issue was easy to reproduce with a one-liner: $ ip link set dev ethX down; ip link set dev ethX up; \ ip link set dev ethX down; ip link set dev ethX up; Fixes: ac9e81c230eb ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: sfp: fix memory leak in sfp_probe()Jianglei Nie1-1/+1
[ Upstream commit 0a18d802d65cf662644fd1d369c86d84a5630652 ] sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-07net: dp83822: disable rx error interruptEnguerrand de Ribaucourt1-2/+1
commit 0e597e2affb90d6ea48df6890d882924acf71e19 upstream. Some RX errors, notably when disconnecting the cable, increase the RCSR register. Once half full (0x7fff), an interrupt flood is generated. I measured ~3k/s interrupts even after the RX errors transfer was stopped. Since we don't read and clear the RCSR register, we should disable this interrupt. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07net: dp83822: disable false carrier interruptEnguerrand de Ribaucourt1-1/+0
commit c96614eeab663646f57f67aa591e015abd8bd0ba upstream. When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts. Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt. In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-29phy: aquantia: Fix AN when higher speeds than 1G are not advertisedClaudiu Manoil1-1/+14
[ Upstream commit 9b7fd1670a94a57d974795acebde843a5c1a354e ] Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14net: phy: dp83867: retrigger SGMII AN when link changeTan Tee Min1-0/+29
commit c76acfb7e19dcc3a0964e0563770b1d11b8d4540 upstream. There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14net: mdio: unexport __init-annotated mdio_bus_init()Masahiro Yamada1-1/+0
[ Upstream commit 35b42dce619701f1300fb8498dae82c9bb1f0263 ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09net: phy: micrel: Allow probing without .driver_dataFabio Estevam1-5/+6
[ Upstream commit f2ef6f7539c68c6bd6c32323d8845ee102b7c450 ] Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18net: phy: Fix race condition on link status changeFrancesco Dolcini1-5/+40
commit 91a7cda1f4b8bdf770000a3b60640576dafe0cec upstream. This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: <stable@vger.kernel.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [fd: backport: adapt locking before did_interrupt()/ack_interrupt() callbacks removal ] Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONTMatthew Hagan1-1/+11
[ Upstream commit 2069624dac19d62c558bb6468fe03678553ab01d ] As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled. This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function. Change from v1: removal of erroneous return statment (Andrew Lunn) Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: phy: marvell10g: fix return value on errorBaruch Siach1-1/+1
[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ] Return back the error value that we get from phy_read_mmd(). Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1") Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13net: sfp: add 2500base-X quirk for Lantech SFP moduleMichael Walle1-0/+6
[ Upstream commit 00eec9fe4f3b9588b4bfa8ef9dd0aae96407d5d7 ] The Lantech 8330-262D-E module is 2500base-X capable, but it reports the nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the module. The following in an EEPROM dump of such a SFP with the serial number redacted: 00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00 ???...? @????... 10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20 ??..Lantech 20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32 ....8330-262 30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb D-E V1.0?R.? 40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX .?..FCXXXXXXXXXX 50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98 220214 h??? 60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54 EXTREMELY COMPAT 70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20 IBLE Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08net: phy: broadcom: Fix brcm_fet_config_init()Florian Fainelli1-0/+21
[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ] A Broadcom AC201 PHY (same entry as 5241) would be flagged by the Broadcom UniMAC MDIO controller as not completing the turn around properly since the PHY expects 65 MDC clock cycles to complete a write cycle, and the MDIO controller was only sending 64 MDC clock cycles as determined by looking at a scope shot. This would make the subsequent read fail with the UniMAC MDIO controller command field having MDIO_READ_FAIL set and we would abort the brcm_fet_config_init() function and thus not probe the PHY at all. After issuing a software reset, wait for at least 1ms which is well above the 1us reset delay advertised by the datasheet and issue a dummy read to let the PHY turn around the line properly. This read specifically ignores -EIO which would be returned by MDIO controllers checking for the line being turned around. If we have a genuine reaad failure, the next read of the interrupt status register would pick it up anyway. Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23net: phy: mscc: Add MODULE_FIRMWARE macrosJuerg Haefliger1-0/+3
[ Upstream commit f1858c277ba40172005b76a31e6bb931bfc19d9c ] The driver requires firmware so define MODULE_FIRMWARE so that modinfo provides the details. Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files") Signed-off-by: Juerg Haefliger <juergh@canonical.com> Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23net: phy: marvell: Fix invalid comparison in the resume and suspend functionsKurt Cancemi1-4/+4
[ Upstream commit 837d9e49402eaf030db55a49f96fc51d73b4b441 ] This bug resulted in only the current mode being resumed and suspended when the PHY supported both fiber and copper modes and when the PHY only supported copper mode the fiber mode would incorrectly be attempted to be resumed and suspended. Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.") Signed-off-by: Kurt Cancemi <kurt@x64architecture.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16net: phy: DP83822: clear MISR2 register to disable interruptsClément Léger1-1/+1
[ Upstream commit 37c9d66c95564c85a001d8a035354f0220a1e1c3 ] MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYsPavel Parkhomenko1-4/+3
commit aec12836e7196e4d360b2cbf20cf7aa5139ad2ec upstream. When setting up autonegotiation for 88E1118R and compatible PHYs, a software reset of PHY is issued before setting up polarity. This is incorrect as changes of MDI Crossover Mode bits are disruptive to the normal operation and must be followed by a software reset to take effect. Let's patch m88e1118_config_aneg() to fix the issue mentioned before by invoking software reset of the PHY just after setting up MDI-x polarity. Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYsPavel Parkhomenko1-4/+6
commit fe4f57bf7b585dca58f1496c4e2481ecbae18126 upstream. It is mandatory for a software to issue a reset upon modifying RGMII Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC Specific Control register 2 (page 2, register 21) otherwise the changes won't be perceived by the PHY (the same is applicable for a lot of other registers). Not setting the RGMII delays on the platforms that imply it' being done on the PHY side will consequently cause the traffic loss. We discovered that the denoted soft-reset is missing in the m88e1121_config_aneg() method for the case if the RGMII delays are modified but the MDIx polarity isn't changed or the auto-negotiation is left enabled, thus causing the traffic loss on our platform with Marvell Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the delays have been actually set in the m88e1121_config_aneg_rgmii_delays() method. Cc: stable@vger.kernel.org Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01phylib: fix potential use-after-freeMarek Behún1-3/+3
[ Upstream commit cbda1b16687580d5beee38273f6241ae3725960c ] Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220119162748.32418-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01net: phy: broadcom: hook up soft_reset for BCM54616SRobert Hancock1-0/+1
[ Upstream commit d15c7e875d44367005370e6a82e8f3a382a04f9b ] A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which is a 1 Gbps copper module operating in SGMII mode with an internal BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the module would work properly on the initial insertion or boot of the device, but after the device was rebooted, the link would either only come up at 100 Mbps speeds or go up and down erratically. I found no meaningful changes in the PHY configuration registers between the working and non-working boots, but the status registers seemed to have a lot of error indications set on the SERDES side of the device on the non-working boot. I suspect the problem is that whatever happens on the SGMII link when the device is rebooted and the FPGA logic gets reloaded ends up putting the module's onboard PHY into a bad state. Since commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") the genphy_soft_reset call is not made automatically by the PHY core unless the callback is explicitly specified in the driver structure. For most of these Broadcom devices, there is probably a hardware reset that gets asserted to reset the PHY during boot, however for SFP modules (where the BCM54616S is commonly found) no such reset line exists, so if the board keeps the SFP cage powered up across a reboot, it will end up with no reset occurring during reboots. Hook up the genphy_soft_reset callback for BCM54616S to ensure that a PHY reset is performed before the device is initialized. This appears to fix the issue with erratic operation after a reboot with this SFP module. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01net: sfp: ignore disabled SFP nodeMarek Behún1-0/+5
commit 2148927e6ed43a1667baf7c2ae3e0e05a44b51a0 upstream. Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") added code which finds SFP bus DT node even if the node is disabled with status = "disabled". Because of this, when phylink is created, it ends with non-null .sfp_bus member, even though the SFP module is not probed (because the node is disabled). We need to ignore disabled SFP bus node. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: sfp: fix high power modules without diagnostic monitoringRussell King (Oracle)1-4/+21
commit 5765cee119bf5a36c94d20eceb37c445508934be upstream. Commit 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change modules") unintetionally changed the semantics for high power modules without the digital diagnostics monitoring. We repeatedly attempt to read the power status from the non-existing 0xa2 address in a futile hope this failure is temporary: [ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408 [ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode [ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5 [ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5 [ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5 We previosuly assumed such modules were powered up in the correct mode, continuing without further configuration as long as the required power class was supported by the host. Restore this behaviour, while preserving the intent of subsequent patches to avoid the "Address Change Sequence not supported" warning if we are not going to be accessing the DDM address. Fixes: 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change modules") Reported-by: 照山周一郎 <teruyama@springboard-inc.jp> Tested-by: 照山周一郎 <teruyama@springboard-inc.jp> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: phy: marvell: configure RGMII delays for 88E1118Russell King (Oracle)1-0/+6
[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ] Corentin Labbe reports that the SSI 1328 does not work when allowing the PHY to operate at gigabit speeds, but does work with the generic PHY driver. This appears to be because m88e1118_config_init() writes a fixed value to the MSCR register, claiming that this is to enable 1G speeds. However, this always sets bits 4 and 5, enabling RGMII transmit and receive delays. The suspicion is that the original board this was added for required the delays to make 1G speeds work. Add the necessary configuration for RGMII delays for the 88E1118 to bring this into line with the requirements for RGMII support, and thus make the SSI 1328 work. Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502. Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: mdio: Demote probed message to debug printFlorian Fainelli1-1/+1
[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ] On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-03 14:24:34 +0300