summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
9 daysnet: phy: mediatek: fix nvmem cell reference leak in mt798x_phy_calibrationMiaoqian Lin1-1/+1
[ Upstream commit 1e5a541420b8c6d87d88eb50b6b978cdeafee1c9 ] When nvmem_cell_read() fails in mt798x_phy_calibration(), the function returns without calling nvmem_cell_put(), leaking the cell reference. Move nvmem_cell_put() right after nvmem_cell_read() to ensure the cell reference is always released regardless of the read result. Found via static analysis and code review. Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251211081313.2368460-1-linmq006@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 daysnet: phy: adin1100: Fix software power-down ready conditionAlexander Dahl1-1/+1
[ Upstream commit bccaf1fe08f2c9f96f6bc38391d41e67f6bf38e3 ] Value CRSM_SFT_PD written to Software Power-Down Control Register (CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for confirmation powerdown has been reached. The condition could have only worked when disabling powerdown (both 0x00), but never when enabling it (0x01 != 0x02). Result is a timeout, like so: $ ifdown eth0 macb f802c000.ethernet eth0: Link is Down ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110 ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110 Fixes: 7eaf9132996a ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY") Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20251119124737.280939-2-ada@thorsis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
9 daysphy: mscc: Fix PTP for VSC8574 and VSC8572Horatiu Vultur1-3/+3
[ Upstream commit ea5df88aeca112aac69e6c32e3dd1433a113b0c9 ] The PTP initialization is two-step. First part are the function vsc8584_ptp_probe_once() and vsc8584_ptp_probe() at probe time which initialize the locks, queues, creates the PTP device. The second part is the function vsc8584_ptp_init() at config_init() time which initialize PTP in the HW. For VSC8574 and VSC8572, the PTP initialization is incomplete. It is missing the first part but it makes the second part. Meaning that the ptp_clock_register() is never called. There is no crash without the first part when enabling PTP but this is unexpected because some PHys have PTP functionality exposed by the driver and some don't even though they share the same PTP clock PTP. Fixes: 774626fa440e ("net: phy: mscc: Add PTP support for 2 more VSC PHYs") Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20251023191350.190940-3-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07net: phy: mxl-gpy: fix bogus error on USXGMII and integrated PHYDaniel Golle1-1/+1
[ Upstream commit ec3803b5917b6ff2f86ea965d0985c95d8a85119 ] As the interface mode doesn't need to be updated on PHYs connected with USXGMII and integrated PHYs, gpy_update_interface() should just return 0 in these cases rather than -EINVAL which has wrongly been introduced by commit 7a495dde27ebc ("net: phy: mxl-gpy: Change gpy_update_interface() function return type"), as this breaks support for those PHYs. Fixes: 7a495dde27ebc ("net: phy: mxl-gpy: Change gpy_update_interface() function return type") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/f744f721a1fcc5e2e936428c62ff2c7d94d2a293.1763648168.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24net: mdio: fix resource leak in mdiobus_register_device()Buday Csaba1-1/+4
[ Upstream commit e6ca8f533ed41129fcf052297718f417f021cc7d ] Fix a possible leak in mdiobus_register_device() when both a reset-gpio and a reset-controller are present. Clean up the already claimed reset-gpio, when the registration of the reset-controller fails, so when an error code is returned, the device retains its state before the registration attempt. Link: https://lore.kernel.org/all/20251106144603.39053c81@kernel.org/ Fixes: 71dd6c0dff51 ("net: phy: add support for reset-controller") Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/4b419377f8dd7d2f63f919d0f74a336c734f8fff.1762584481.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24net: phy: clear link parameters on admin link downOleksij Rempel1-0/+13
[ Upstream commit 60f887b1290b43a4f5a3497982a725687b193fa4 ] When a PHY is halted (e.g. `ip link set dev lan2 down`), several fields in struct phy_device may still reflect the last active connection. This leads to ethtool showing stale values even though the link is down. Reset selected fields in _phy_state_machine() when transitioning to PHY_HALTED and the link was previously up: - speed/duplex -> UNKNOWN, but only in autoneg mode (in forced mode these fields carry configuration, not status) - master_slave_state -> UNKNOWN if previously supported - mdix -> INVALID (state only, same meaning as "unknown") - lp_advertising -> always cleared The cleanup is skipped if the PHY is in PHY_ERROR state, so the last values remain available for diagnostics. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250917094751.2101285-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24net: phy: marvell: Fix 88e1510 downshift counter errataRohan G Thomas1-1/+38
[ Upstream commit deb105f49879dd50d595f7f55207d6e74dec34e6 ] The 88e1510 PHY has an erratum where the phy downshift counter is not cleared after phy being suspended(BMCR_PDOWN set) and then later resumed(BMCR_PDOWN cleared). This can cause the gigabit link to intermittently downshift to a lower speed. Disabling and re-enabling the downshift feature clears the counter, allowing the PHY to retry gigabit link negotiation up to the programmed retry count times before downshifting. This behavior has been observed on copper links. Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250906-marvell_fix-v2-1-f6efb286937f@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24net: phy: fixed_phy: let fixed_phy_unregister free the phy_deviceHeiner Kallweit1-0/+1
[ Upstream commit a0f849c1cc6df0db9083b4c81c05a5456b1ed0fb ] fixed_phy_register() creates and registers the phy_device. To be symmetric, we should not only unregister, but also free the phy_device in fixed_phy_unregister(). This allows to simplify code in users. Note wrt of_phy_deregister_fixed_link(): put_device(&phydev->mdio.dev) and phy_device_free(phydev) are identical. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/ad8dda9a-10ed-4060-916b-3f13bdbb899d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24net: phy: dp83867: Disable EEE support as not implementedEmanuele Ghidoli1-0/+8
[ Upstream commit 84a905290cb4c3d9a71a9e3b2f2e02e031e7512f ] While the DP83867 PHYs report EEE capability through their feature registers, the actual hardware does not support EEE (see Links). When the connected MAC enables EEE, it causes link instability and communication failures. The issue is reproducible with a iMX8MP and relevant stmmac ethernet port. Since the introduction of phylink-managed EEE support in the stmmac driver, EEE is now enabled by default, leading to issues on systems using the DP83867 PHY. Call phy_disable_eee during phy initialization to prevent EEE from being enabled on DP83867 PHYs. Link: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1445244/dp83867ir-dp83867-disable-eee-lpi Link: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/658638/dp83867ir-eee-energy-efficient-ethernet Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251023144857.529566-1-ghidoliemanuele@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ inlined phy_disable_eee() functionality ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19net: mdiobus: release reset_gpio in mdiobus_unregister_device()Buday Csaba1-3/+1
commit 8ea25274ebaf2f6be8be374633b2ed8348ec0e70 upstream. reset_gpio is claimed in mdiobus_register_device(), but it is not released in mdiobus_unregister_device(). It is instead only released when the whole MDIO bus is unregistered. When a device uses the reset_gpio property, it becomes impossible to unregister it and register it again, because the GPIO remains claimed. This patch resolves that issue. Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Csókás Bence <csokas.bence@prolan.hu> [ csokas.bence: Resolve rebase conflict and clarify msg ] Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ csokas.bence: Use the v1 patch on top of 6.6, as specified in notes ] Signed-off-by: Bence Csókás <csokas.bence@prolan.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-09phy: mscc: Stop taking ts_lock for tx_queue and use its own lockHoratiu Vultur1-10/+8
[ Upstream commit 9b2bfdbf43adb9929c5ddcdd96efedbf1c88cf53 ] When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e #427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000 5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-04phy: mscc: Fix when PTP clock is register and unregisterHoratiu Vultur3-16/+26
[ Upstream commit 882e57cbc7204662f6c5672d5b04336c1d790b03 ] It looks like that every time when the interface was set down and up the driver was creating a new ptp clock. On top of this the function ptp_clock_unregister was never called. Therefore fix this by calling ptp_clock_register and initialize the mii_ts struct inside the probe function and call ptp_clock_unregister when driver is removed. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250825065543.2916334-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28phy: mscc: Fix timestamping for vsc8584Horatiu Vultur3-12/+61
[ Upstream commit bc1a59cff9f797bfbf8f3104507584d89e9ecf2e ] There was a problem when we received frames and the frames were timestamped. The driver is configured to store the nanosecond part of the timestmap in the ptp reserved bits and it would take the second part by reading the LTC. The problem is that when reading the LTC we are in atomic context and to read the second part will go over mdio bus which might sleep, so we get an error. The fix consists in actually put all the frames in a queue and start the aux work and in that work to read the LTC and then calculate the full received time. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250818081029.1300780-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28net: phy: smsc: add proper reset flags for LAN8710ABuday Csaba1-0/+1
[ Upstream commit 57ec5a8735dc5dccd1ee68afdb1114956a3fce0d ] According to the LAN8710A datasheet (Rev. B, section 3.8.5.1), a hardware reset is required after power-on, and the reference clock (REF_CLK) must be established before asserting reset. Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Cc: Csókás Bence <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250728152916.46249-2-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28net: phy: micrel: Add ksz9131_resume()Biju Das1-1/+9
[ Upstream commit f25a7eaa897f21396e99f90809af82ca553c9d14 ] The Renesas RZ/G3E SMARC EVK uses KSZ9131RNXC phy. On deep power state, PHY loses the power and on wakeup the rgmii delays are not reconfigured causing it to fail. Replace the callback kszphy_resume()->ksz9131_resume() for reconfiguring the rgmii_delay when it exits from PM suspend state. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250711054029.48536-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28net: phy: micrel: fix KSZ8081/KSZ8091 cable testFlorian Larysch1-0/+2
commit 49db61c27c4bbd24364086dc0892bd3e14c1502e upstream. Commit 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814 phy") introduced cable_test support for the LAN8814 that reuses parts of the KSZ886x logic and introduced the cable_diag_reg and pair_mask parameters to account for differences between those chips. However, it did not update the ksz8081_type struct, so those members are now 0, causing no pairs to be tested in ksz886x_cable_test_get_status and ksz886x_cable_test_wait_for_completion to poll the wrong register for the affected PHYs (Basic Control/Reset, which is 0 in normal operation) and exit immediately. Fix this by setting both struct members accordingly. Fixes: 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814 phy") Cc: stable@vger.kernel.org Signed-off-by: Florian Larysch <fl@n621.de> Link: https://patch.msgid.link/20250723222250.13960-1-fl@n621.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15phy: mscc: Fix parsing of unicast framesHoratiu Vultur2-0/+2
[ Upstream commit 6fb5ff63b35b7e849cc8510957f25753f87f63d2 ] According to the 1588 standard, it is possible to use both unicast and multicast frames to send the PTP information. It was noticed that if the frames were unicast they were not processed by the analyzer meaning that they were not timestamped. Therefore fix this to match also these unicast frames. Fixes: ab2bf9339357 ("net: phy: mscc: 1588 block initialization") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250726140307.3039694-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net: phy: Don't register LEDs for genphySean Anderson1-2/+4
[ Upstream commit f0f2b992d8185a0366be951685e08643aae17d6d ] If a PHY has no driver, the genphy driver is probed/removed directly in phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the LEDs will be (un)registered when probing/removing the genphy driver. This could occur if the leds are for a non-generic driver that isn't loaded for whatever reason. Synchronously removing the PHY device in phy_detach leads to the following deadlock: rtnl_lock() ndo_close() ... phy_detach() phy_remove() phy_leds_unregister() led_classdev_unregister() led_trigger_set() netdev_trigger_deactivate() unregister_netdevice_notifier() rtnl_lock() There is a corresponding deadlock on the open/register side of things (and that one is reported by lockdep), but it requires a race while this one is deterministic. Generic PHYs do not support LEDs anyway, so don't bother registering them. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250707195803.666097-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17net: phy: microchip: limit 100M workaround to link-down events on LAN88xxOleksij Rempel1-1/+1
[ Upstream commit dd4360c0e8504f2f7639c7f5d07c93cfd6a98333 ] Restrict the 100Mbit forced-mode workaround to link-down transitions only, to prevent repeated link reset cycles in certain configurations. The workaround was originally introduced to improve signal reliability when switching cables between long and short distances. It temporarily forces the PHY into 10 Mbps before returning to 100 Mbps. However, when used with autonegotiating link partners (e.g., Intel i350), executing this workaround on every link change can confuse the partner and cause constant renegotiation loops. This results in repeated link down/up transitions and the PHY never reaching a stable state. Limit the workaround to only run during the PHY_NOLINK state. This ensures it is triggered only once per link drop, avoiding disruptive toggling while still preserving its intended effect. Note: I am not able to reproduce the original issue that this workaround addresses. I can only confirm that 100 Mbit mode works correctly in my test setup. Based on code inspection, I assume the workaround aims to reset some internal state machine or signal block by toggling speeds. However, a PHY reset is already performed earlier in the function via phy_init_hw(), which may achieve a similar effect. Without a reproducer, I conservatively keep the workaround but restrict its conditions. Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17net: phy: smsc: Fix link failure in forced mode with Auto-MDIXOleksij Rempel1-3/+22
[ Upstream commit 9dfe110cc0f6ef42af8e81ce52aef34a647d0b8a ] Force a fixed MDI-X mode when auto-negotiation is disabled to prevent link instability. When forcing the link speed and duplex on a LAN9500 PHY (e.g., with `ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto mode, the PHY fails to establish a stable link. This occurs because the PHY's Auto-MDIX algorithm is not designed to operate when auto-negotiation is disabled. In this state, the PHY continuously toggles the TX/RX signal pairs, which prevents the link partner from synchronizing. This patch resolves the issue by detecting when auto-negotiation is disabled. If the MDI-X control mode is set to 'auto', the driver now forces a specific, stable mode (ETH_TP_MDI) to prevent the pair toggling. This choice of a fixed MDI mode mirrors the behavior the hardware would exhibit if the AUTOMDIX_EN strap were configured for a fixed MDI connection. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17net: phy: smsc: Force predictable MDI-X state on LAN87xxOleksij Rempel1-1/+28
[ Upstream commit 0713e55533c88a20edb53eea6517dc56786a0078 ] Override the hardware strap configuration for MDI-X mode to ensure a predictable initial state for the driver. The initial mode of the LAN87xx PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no documented way to read its latched status. This unpredictability means the driver cannot know if the PHY has initialized with Auto-MDIX enabled or disabled, preventing it from providing a reliable interface to the user. This patch introduces a `config_init` hook that forces the PHY into a known state by explicitly enabling Auto-MDIX. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17net: phy: smsc: Fix Auto-MDIX configuration when disabled by strapOleksij Rempel1-1/+2
[ Upstream commit a141af8eb2272ab0f677a7f2653874840bc9b214 ] Correct the Auto-MDIX configuration to ensure userspace settings are respected when the feature is disabled by the AUTOMDIX_EN hardware strap. The LAN9500 PHY allows its default MDI-X mode to be configured via a hardware strap. If this strap sets the default to "MDI-X off", the driver was previously unable to enable Auto-MDIX from userspace. When handling the ETH_TP_MDI_AUTO case, the driver would set the SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY falls back to its hardware strap default, ignoring the software request. This patch corrects the behavior by also setting the override bit when enabling Auto-MDIX. This ensures that the userspace configuration takes precedence over the hardware strap, allowing Auto-MDIX to be enabled correctly in all scenarios. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19net/mdiobus: Fix potential out-of-bounds clause 45 read/write accessJakub Raczynski1-0/+6
[ Upstream commit 260388f79e94fb3026c419a208ece8358bb7b555 ] When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19net/mdiobus: Fix potential out-of-bounds read/write accessJakub Raczynski1-0/+6
[ Upstream commit 0e629694126ca388916f059453a1c36adde219c4 ] When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 framesHoratiu Vultur1-1/+3
[ Upstream commit 57a92d14659df3e7e7e0052358c8cc68bbbc3b5e ] We have noticed that when PHY timestamping is enabled, L2 frames seems to be modified by changing two 2 bytes with a value of 0. The place were these 2 bytes seems to be random(or I couldn't find a pattern). In most of the cases the userspace can ignore these frames but if for example those 2 bytes are in the correction field there is nothing to do. This seems to happen when configuring the HW for IPv4 even that the flow is not enabled. These 2 bytes correspond to the UDPv4 checksum and once we don't enable clearing the checksum when using L2 frames then the frame doesn't seem to be changed anymore. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250523082716.2935895-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19net: phy: mscc: Fix memory leak when using one step timestampingHoratiu Vultur1-5/+11
[ Upstream commit 846992645b25ec4253167e3f931e4597eb84af56 ] Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250522115722.2827199-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19net: phy: clear phydev->devlink when the link is deletedWei Fang1-1/+3
[ Upstream commit 0795b05a59b1371b18ffbf09d385296b12e9f5d5 ] There is a potential crash issue when disabling and re-enabling the network port. When disabling the network port, phy_detach() calls device_link_del() to remove the device link, but it does not clear phydev->devlink, so phydev->devlink is not a NULL pointer. Then the network port is re-enabled, but if phy_attach_direct() fails before calling device_link_add(), the code jumps to the "error" label and calls phy_detach(). Since phydev->devlink retains the old value from the previous attach/detach cycle, device_link_del() uses the old value, which accesses a NULL pointer and causes a crash. The simplified crash log is as follows. [ 24.702421] Call trace: [ 24.704856] device_link_put_kref+0x20/0x120 [ 24.709124] device_link_del+0x30/0x48 [ 24.712864] phy_detach+0x24/0x168 [ 24.716261] phy_attach_direct+0x168/0x3a4 [ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c [ 24.725140] phylink_of_phy_connect+0x1c/0x34 Therefore, phydev->devlink needs to be cleared when the device link is deleted. Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250523083759.3741168-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04net: phylink: use pl->link_interface in phylink_expects_phy()Choong Yong Liang1-1/+1
[ Upstream commit b63263555eaafbf9ab1a82f2020bbee872d83759 ] The phylink_expects_phy() function allows MAC drivers to check if they are expecting a PHY to attach. The checking condition in phylink_expects_phy() aims to achieve the same result as the checking condition in phylink_attach_phy(). However, the checking condition in phylink_expects_phy() uses pl->link_config.interface, while phylink_attach_phy() uses pl->link_interface. Initially, both pl->link_interface and pl->link_config.interface are set to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND. When the interface switches from SGMII to 2500BASE-X, pl->link_config.interface is updated by phylink_major_config(). At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and pl->link_config.interface is set to 2500BASE-X. Subsequently, when the STMMAC interface is taken down administratively and brought back up, it is blocked by phylink_expects_phy(). Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the same result, phylink_expects_phy() should check pl->link_interface, which never changes, instead of pl->link_config.interface, which is updated by phylink_major_config(). Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Link: https://patch.msgid.link/20250227121522.1802832-2-yong.liang.choong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02net: phy: microchip: force IRQ polling mode for lan88xxFiona Klute1-43/+3
commit 30a41ed32d3088cd0d682a13d7f30b23baed7e93 upstream. With lan88xx based devices the lan78xx driver can get stuck in an interrupt loop while bringing the device up, flooding the kernel log with messages like the following: lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped Removing interrupt support from the lan88xx PHY driver forces the driver to use polling instead, which avoids the problem. The issue has been observed with Raspberry Pi devices at least since 4.14 (see [1], bug report for their downstream kernel), as well as with Nvidia devices [2] in 2020, where disabling interrupts was the vendor-suggested workaround (together with the claim that phylib changes in 4.9 made the interrupt handling in lan78xx incompatible). Iperf reports well over 900Mbits/sec per direction with client in --dualtest mode, so there does not seem to be a significant impact on throughput (lan88xx device connected via switch to the peer). [1] https://github.com/raspberrypi/linux/issues/2447 [2] https://forums.developer.nvidia.com/t/jetson-xavier-and-lan7800-problem/142134/11 Link: https://lore.kernel.org/0901d90d-3f20-4a10-b680-9c978e04ddda@lunn.ch Fixes: 792aec47d59d ("add microchip LAN88xx phy driver") Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Cc: kernel-list@raspberrypi.com Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250416102413.30654-1-fiona.klute@gmx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02net: phy: leds: fix memory leakQingfang Deng1-10/+13
[ Upstream commit b7f0ee992adf601aa00c252418266177eb7ac2bc ] A network restart test on a router led to an out-of-memory condition, which was traced to a memory leak in the PHY LED trigger code. The root cause is misuse of the devm API. The registration function (phy_led_triggers_register) is called from phy_attach_direct, not phy_probe, and the unregister function (phy_led_triggers_unregister) is called from phy_detach, not phy_remove. This means the register and unregister functions can be called multiple times for the same PHY device, but devm-allocated memory is not freed until the driver is unbound. This also prevents kmemleak from detecting the leak, as the devm API internally stores the allocated pointer. Fix this by replacing devm_kzalloc/devm_kcalloc with standard kzalloc/kcalloc, and add the corresponding kfree calls in the unregister path. Fixes: 3928ee6485a3 ("net: phy: leds: Add support for "link" trigger") Fixes: 2e0bc452f472 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Hao Guan <hao.guan@siflower.com.cn> Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25net: sfp: add quirk for 2.5G OEM BX SFPBirger Koblitz1-0/+2
[ Upstream commit a85035561025063125f81090e4f2bd65da368c83 ] The OEM SFP-2.5G-BX10-D/U SFP module pair is meant to operate with 2500Base-X. However, in their EEPROM they incorrectly specify: Transceiver codes : 0x00 0x12 0x00 0x00 0x12 0x00 0x01 0x05 0x00 BR, Nominal : 2500MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. Tested on BananaPi R3. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20250218-b4-lkmsub-v1-1-1e51dcabed90@birger-koblitz.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17net: phy: c45-tjaxx: add delay between MDIO write and read in soft_resetMilos Reljin1-0/+2
commit bd1bbab717608757cccbbe08b0d46e6c3ed0ced5 upstream. In application note (AN13663) for TJA1120, on page 30, there's a figure with average PHY startup timing values following software reset. The time it takes for SMI to become operational after software reset ranges roughly from 500 us to 1500 us. This commit adds 2000 us delay after MDIO write which triggers software reset. Without this delay, soft_reset function returns an error and prevents successful PHY init. Cc: stable@vger.kernel.org Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103") Signed-off-by: Milos Reljin <milos_reljin@outlook.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/AM8P250MB0124D258E5A71041AF2CC322E1E32@AM8P250MB0124.EURP250.PROD.OUTLOOK.COM Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14net: sfp: change quirks for Alcatel Lucent G-010S-PShengyu Qu1-1/+2
[ Upstream commit 90cb5f1776ba371478e2b08fbf7018c7bd781a8d ] Seems Alcatel Lucent G-010S-P also have the same problem that it uses TX_FAULT pin for SOC uart. So apply sfp_fixup_ignore_tx_fault to it. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Link: https://patch.msgid.link/TYCPR01MB84373677E45A7BFA5A28232C98792@TYCPR01MB8437.jpnprd01.prod.outlook.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-14net: phy: ti: add PHY_RST_AFTER_CLK_EN flagDiogo Silva1-0/+2
[ Upstream commit 256748d5480bb3c4b731236c6d6fc86a8e2815d8 ] DP83848 datasheet (section 4.7.2) indicates that the reset pin should be toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to make sure that this indication is respected. In my experience not having this flag enabled would lead to, on some boots, the wrong MII mode being selected if the PHY was initialized on the bootloader and was receiving data during Linux boot. Signed-off-by: Diogo Silva <diogompaissilva@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Fixes: 34e45ad9378c ("net: phy: dp83848: Add TI DP83848 Ethernet PHY") Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01net: phy: dp83822: Fix reset pin definitionsMichel Alex1-2/+2
commit de96f6a3003513c796bbe4e23210a446913f5c00 upstream. This change fixes a rare issue where the PHY fails to detect a link due to incorrect reset behavior. The SW_RESET definition was incorrectly assigned to bit 14, which is the Digital Restart bit according to the datasheet. This commit corrects SW_RESET to bit 15 and assigns DIG_RESTART to bit 14 as per the datasheet specifications. The SW_RESET define is only used in the phy_reset function, which fully re-initializes the PHY after the reset is performed. The change in the bit definitions should not have any negative impact on the functionality of the PHY. v2: - added Fixes tag - improved commit message Cc: stable@vger.kernel.org Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Message-ID: <AS1P250MB0608A798661549BF83C4B43EA9462@AS1P250MB0608.EURP250.PROD.OUTLOOK.COM> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17net: phy: Remove LED entry from LEDs list on unregisterChristian Marangi1-2/+3
commit f50b5d74c68e551667e265123659b187a30fe3a5 upstream. Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") correctly fixed a problem with using devm_ but missed removing the LED entry from the LEDs list. This cause kernel panic on specific scenario where the port for the PHY is torn down and up and the kmod for the PHY is removed. On setting the port down the first time, the assosiacted LEDs are correctly unregistered. The associated kmod for the PHY is now removed. The kmod is now added again and the port is now put up, the associated LED are registered again. On putting the port down again for the second time after these step, the LED list now have 4 elements. With the first 2 already unregistered previously and the 2 new one registered again. This cause a kernel panic as the first 2 element should have been removed. Fix this by correctly removing the element when LED is unregistered. Reported-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Cc: stable@vger.kernel.org Fixes: c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241004182759.14032-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17net: phy: bcm84881: Fix some error handling pathsChristophe JAILLET1-2/+2
[ Upstream commit 9234a2549cb6ac038bec36cc7c084218e9575513 ] If phy_read_mmd() fails, the error code stored in 'bmsr' should be returned instead of 'val' which is likely to be 0. Fixes: 75f4d8d10e01 ("net: phy: add Broadcom BCM84881 PHY driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/3e1755b0c40340d00e089d6adae5bca2f8c79e53.1727982168.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17net: phy: dp83869: fix memory corruption when enabling fiberIngo van Lil1-1/+0
[ Upstream commit a842e443ca8184f2dc82ab307b43a8b38defd6a5 ] When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed. Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection") Signed-off-by: Ingo van Lil <inguin@gmx.de> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241002161807.440378-1-inguin@gmx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net: phy: vitesse: repair vsc73xx autonegotiationPawel Dembicki1-14/+0
[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ] When the vsc73xx mdio bus work properly, the generic autonegotiation configuration works well. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12net: phy: Fix missing of_node_put() for ledsJinjie Ruan1-0/+2
[ Upstream commit 2560db6ede1aaf162a73b2df43e0b6c5ed8819f7 ] The call of of_get_child_by_name() will cause refcount incremented for leds, if it succeeds, it should call of_node_put() to decrease it, fix it. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240830022025.610844-1-ruanjinjie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-11net: phy: micrel: Fix the KSZ9131 MDI-X status issueRaju Lakkaraju1-15/+19
[ Upstream commit 84383b5ef4cd21b4a67de92afdc05a03b5247db9 ] The MDIX status is not accurately reflecting the current state after the link partner has manually altered its MDIX configuration while operating in forced mode. Access information about Auto mdix completion and pair selection from the KSZ9131's Auto/MDI/MDI-X status register Fixes: b64e6a8794d9 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-11net: phy: realtek: add support for RTL8366S Gigabit PHYMark Mentovai1-0/+7
[ Upstream commit 225990c487c1023e7b3aa89beb6a68011fbc0461 ] The PHY built in to the Realtek RTL8366S switch controller was previously supported by genphy_driver. This PHY does not implement MMD operations. Since commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()"), MMD register reads have been made during phy_probe to determine EEE support. For genphy_driver, these reads are transformed into 802.3 annex 22D clause 45-over-clause 22 mmd_phy_indirect operations that perform MII register writes to MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers, which on this PHY are reserved and have another function, rendering the PHY unusable while so configured. Proper support for this PHY is restored by providing a phy_driver that declares MMD operations as unsupported by using the helper functions provided for that purpose, while remaining otherwise identical to genphy_driver. Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Reported-by: Russell Senior <russell@personaltelco.net> Closes: https://github.com/openwrt/openwrt/issues/15981 Link: https://github.com/openwrt/openwrt/issues/15739 Signed-off-by: Mark Mentovai <mark@mentovai.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-18net: phy: microchip: lan87xx: reinit PHY after cable testOleksij Rempel1-1/+1
[ Upstream commit 30f747b8d53bc73555f268d0f48f56174fa5bf10 ] Reinit PHY after cable test, otherwise link can't be established on tested port. This issue is reproducible on LAN9372 switches with integrated 100BaseT1 PHYs. Fixes: 788050256c411 ("net: phy: microchip_t1: add cable test support for lan87xx phy") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240705084954.83048-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05net: phy: micrel: add Microchip KSZ 9477 to the device tableEnguerrand de Ribaucourt1-0/+1
[ Upstream commit 54a4e5c16382e871c01dd82b47e930fdce30406b ] PHY_ID_KSZ9477 was supported but not added to the device table passed to MODULE_DEVICE_TABLE. Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27net: phy: mxl-gpy: Remove interrupt mask clearing from config_initRaju Lakkaraju1-20/+38
[ Upstream commit c44d3ffd85db03ebcc3090e55589e10d5af9f3a9 ] When the system resumes from sleep, the phy_init_hw() function invokes config_init(), which clears all interrupt masks and causes wake events to be lost in subsequent wake sequences. Remove interrupt mask clearing from config_init() and preserve relevant masks in config_intr(). Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27net: sfp: add quirk for ATS SFP-GE-T 1000Base-TX moduleDaniel Golle1-0/+3
[ Upstream commit 0805d67bc0ef95411228e802f31975cfb7555056 ] Add quirk for ATS SFP-GE-T 1000Base-TX module. This copper module comes with broken TX_FAULT indicator which must be ignored for it to work. Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [ rebased on top of net-next ] Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240423090025.29231-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net: sfp: Always call `sfp_sm_mod_remove()` on removeCsókás, Bence1-2/+1
[ Upstream commit e96b2933152fd87b6a41765b2f58b158fde855b6 ] If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will not be run. As a consequence, `sfp_hwmon_remove()` is not getting run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()` itself checks `sfp->sm_mod_state` anyways, so this check was not really needed in the first place. Fixes: d2e816c0293f ("net: sfp: handle module remove outside state machine") Signed-off-by: "Csókás, Bence" <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net: phy: Micrel KSZ8061: fix errata solution not taking effect problemTristram Ha1-1/+41
[ Upstream commit 0a8d3f2e3e8d8aea8af017e14227b91d5989b696 ] KSZ8061 needs to write to a MMD register at driver initialization to fix an errata. This worked in 5.0 kernel but not in newer kernels. The issue is the main phylib code no longer resets PHY at the very beginning. Calling phy resuming code later will reset the chip if it is already powered down at the beginning. This wipes out the MMD register write. Solution is to implement a phy resume function for KSZ8061 to take care of this problem. Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21net: phy: micrel: fix KSZ9477 PHY issues after suspend/resumeTristram Ha1-6/+56
[ Upstream commit 6149db4997f582e958da675092f21c666e3b67b7 ] When the PHY is powered up after powered down most of the registers are reset, so the PHY setup code needs to be done again. In addition the interrupt register will need to be setup again so that link status indication works again. Fixes: 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16net: sfp-bus: fix SFP mode detect from bitrateRussell King (Oracle)1-4/+4
commit 97eb5d51b4a584a60e5d096bdb6b33edc9f50d8d upstream. The referenced commit moved the setting of the Autoneg and pause bits early in sfp_parse_support(). However, we check whether the modes are empty before using the bitrate to set some modes. Setting these bits so early causes that test to always be false, preventing this working, and thus some modules that used to work no longer do. Move them just before the call to the quirk. Fixes: 8110633db49d ("net: sfp-bus: allow SFP quirks to override Autoneg and pause bits") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/r/E1rPMJW-001Ahf-L0@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-20 23:56:40 +0300