summaryrefslogtreecommitdiff
path: root/drivers/net/phy/vitesse.c
AgeCommit message (Collapse)AuthorFilesLines
2017-12-01net: phy: remove generic settings for callbacks config_aneg and read_status ↵Heiner Kallweit1-12/+0
from drivers Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: phy: vitesse: add support for VSC8572Stephen Agate1-0/+14
Add support for the Vitesse VSC8572 which is functionally equivalent to the already supported VSC8574. As such, all the same handling functions are used since the VSC8572 merely has half the number of phy blocks internally. Signed-off-by: Stephen Agate <stephen.agate@uk.thalesgroup.com> Signed-off-by: Neill Whillans <neill.whillans@codethink.co.uk> Reviewed-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net/phy/vitesse: Configure RGMII skew on VSC8601, if neededAlex1-1/+33
With RGMII, we need a 1.5 to 2ns skew between clock and data lines. The VSC8601 can handle this internally. While the VSC8601 can set more fine-grained delays, the standard skew settings work out of the box. The same heuristic is used to determine when this skew should be enabled as in vsc824x_config_init(). Tested on custom board with AM3352 SOC and VSC801 PHY. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn1-8/+0
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16net: phy: vitesse: add support for VSC8601Måns Rullgård1-1/+15
This adds support for the Vitesse VSC8601 PHY. Generic functions are used for everything except interrupt handling. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21Revert "net/phy: Add Vitesse 8641 phy ID"Kevin Hao1-14/+0
This reverts commit 1298267b548a78840bd4b3e030993ff8747ca5e6. That commit claim that the Vitesse VSC8641 is compatible with Vitesse 82xx. But this is not true. It seems that all the registers used in Vitesse phy driver are not compatible between 8641 and 82xx. It does cause malfunction of the Ethernet on p1010rdb-pa board. So we definitely need a rework in order to support the 8641 phy in this driver. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25net/phy: Add Vitesse 8641 phy IDShaohui Xie1-0/+14
Vitesse VSC8641 is compatible with Vitesse 82xx Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: replace phy_drivers_register callsJohan Hovold1-13/+1
Replace module init/exit which only calls phy_drivers_register with module_phy_driver macro. Tested using Micrel driver, and otherwise compile-tested only. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23net/phy: Remove return value for void functionShruti Kanetkar1-2/+1
This was caught when using a spatch (aka. coccinelle) script written by Joe Perches. Cc: Joe Perches <joe@perches.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-29phy: Add Vitesse 8514 phy IDShaohui Xie1-0/+15
Phy is compatible with Vitesse 82xx Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21net/phy: Add the autocross feature for forced links on VSC82x4Madalin Bucur1-5/+70
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21net/phy: Add VSC8662 supportSandeep Singh1-0/+14
Vitesse VSC8662 is Dual Port 10/100/1000Base-T Phy Its register set and features are similar to other Vitesse Phys. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21net/phy: Add VSC8574 supportshaohui xie1-1/+16
The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes interfaces for quad-port dual media capability. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21net/phy: Add VSC8234 supportAndy Fleming1-2/+17
Vitesse VSC8234 is quad port 10/100/1000BASE-T PHY with SGMII and SERDES MAC interfaces. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31phy: Add Vitesse 8211 phy IDMichal Simek1-0/+15
Phy is compatible with Vitesse 8221. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31phy: Clean coding style in vitesse phyMichal Simek1-12/+11
- Remove trailing white space - Remove spaces before tag - Fix comments Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10phy: vitesse make vsc824x_add_skew staticstephen hemminger1-2/+1
Function is only used in this file, should be static and not an exported symbol. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09phylib: Support registering a bunch of driversChristian Hohnstaedt1-30/+22
If registering of one of them fails, all already registered drivers of this module will be unregistered. Use the new register/unregister functions in all drivers registering more than one driver. amd.c, realtek.c: Simplify: directly return registration result. Tested with broadcom.c All others compile-tested. Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19phylib: Modify Vitesse RGMII skew settingsAndy Fleming1-12/+22
The Vitesse driver was using the RGMII_ID interface type to determine if skew was necessary. However, we want to move away from using that interface type, as it's really a property of the board's PHY connection. However, some boards depend on it, so we want to support it, while allowing new boards to use the more flexible "fixups" approach. To do this, we extract the code which adds skew into its own function, and call that function when RGMII_ID has been selected. Another side-effect of this change is that if your PHY has skew set already, it doesn't clear it. This way, the fixup code can modify the register without config_init then clearing it. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net/phy: fix many "defined but unused" warningsUwe Kleine-König1-1/+1
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03phylib: Add module table to all existing phy driversDavid Woodhouse1-0/+8
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25phylib: Add Vitesse VSC8221 SGMII PHYTrent Piepho1-9/+55
PHY is mostly compatible with the existing VSC8244 PHY. The init sequence is different and the interrupt mask lacks some bits present in the VSC8244. Rather than making a copy of the existing VSC234x config_intr function and change one constant, I modify it to select the interrupt mask based on which driver is calling it. This lets it be used by both drivers. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-25Fix error checking in Vitesse IRQ configAndy Fleming1-1/+1
phy_read() returns a negative number if there's an error, but the error-checking code in the Vitesse driver's config_intr function triggers if phy_read() returns non-zero. Correct that. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-19Fix Vitesse RGMII-ID supportAndy Fleming1-3/+20
The Vitesse PHY on the 8641D needs to be set up with internal delay to work in RGMII mode. So we add skew when it is set to RGMII_ID mode. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Haruki Dai <Dai.Haruki@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2007-07-19Fix Vitesse 824x PHY interrupt ackingAndy Fleming1-2/+21
The Vitesse 824x PHY doesn't allow an interrupt to be cleared if the mask bit for that interrupt isn't set. This means that the PHY Lib's order of handling interrupts (disable, then clear) breaks on this PHY. However, clearing then disabling the interrupt opens up the code for a silly race condition. So rather than change the PHY Lib, we change the Vitesse driver so it always clears interrupts before disabling them. Further, the ack function only clears the interrupt if interrupts are enabled. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Haiying Wang <Haiying.Wang@freescale.com>
2007-06-28phy: Fix phy_id for Vitesse 824x PHYKumar Gala1-1/+1
The phy_id specified for the Vitesse 824x PHY would never match because it was expecting bits to be set that would be masked by the phy_id_mask. Fix the phy_id so it will match properly, and changed the mdio_bus_match to mask both the driver and devices phy_id with the mask so we dont have this issue in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-08-14[PATCH] remove unnecessary config.h includes from drivers/net/Dave Jones1-1/+0
config.h is automatically included by kbuild these days. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-21[POWERPC] Add Vitesse 8244 PHY for MPC8641 HPCN platform.Jon Loeliger1-0/+112
Signed-off-by: Kriston Carson <KristonCarson@freescale.com> Signed-off-by: Xianghua Xiao <x.xiao@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 08:12:12 +0300