summaryrefslogtreecommitdiff
path: root/drivers/net/phy/phy.c
AgeCommit message (Collapse)AuthorFilesLines
2025-11-24net: phy: clear link parameters on admin link downOleksij Rempel1-0/+13
[ Upstream commit 60f887b1290b43a4f5a3497982a725687b193fa4 ] When a PHY is halted (e.g. `ip link set dev lan2 down`), several fields in struct phy_device may still reflect the last active connection. This leads to ethtool showing stale values even though the link is down. Reset selected fields in _phy_state_machine() when transitioning to PHY_HALTED and the link was previously up: - speed/duplex -> UNKNOWN, but only in autoneg mode (in forced mode these fields carry configuration, not status) - master_slave_state -> UNKNOWN if previously supported - mdix -> INVALID (state only, same meaning as "unknown") - lp_advertising -> always cleared The cleanup is skipped if the PHY is in PHY_ERROR state, so the last values remain available for diagnostics. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250917094751.2101285-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+7
Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-19net: phy: Fix deadlocking in phy_error() invocationSerge Semin1-4/+7
Since commit 91a7cda1f4b8 ("net: phy: Fix race condition on link status change") all the phy_error() method invocations have been causing the nested-mutex-lock deadlock because it's normally done in the PHY-driver threaded IRQ handlers which since that change have been called with the phydev->lock mutex held. Here is the calls thread: IRQ: phy_interrupt() +-> mutex_lock(&phydev->lock); <--------------------+ drv->handle_interrupt() | Deadlock due +-> ERROR: phy_error() + to the nested +-> phy_process_error() | mutex lock +-> mutex_lock(&phydev->lock); <-+ phydev->state = PHY_ERROR; mutex_unlock(&phydev->lock); mutex_unlock(&phydev->lock); The problem can be easily reproduced just by calling phy_error() from any PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock mutex lock from the phy_process_error() method and printing a nasty error message to the system log if the mutex isn't held in the caller execution context. Note for the fix to work correctly in the PHY-subsystem itself the phydev->lock mutex locking must be added to the phy_error_precise() function. Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com Fixes: 91a7cda1f4b8 ("net: phy: Fix race condition on link status change") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-03net: phy: provide phylib stubs for hardware timestamping operationsVladimir Oltean1-0/+34
net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl() for hardware timestamping purposes. This is not directly possible, because phy_mii_ioctl() is a symbol provided under CONFIG_PHYLIB. Do something similar to what was done in DSA in commit 5a17818682cf ("net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub"), and arrange some indirect calls to phy_mii_ioctl() through a stub structure containing function pointers, that's provided by phylib as built-in even when CONFIG_PHYLIB=m, and which phy_init() populates at runtime (module insertion). Note: maybe the ownership of the ethtool_phy_ops singleton is backwards, and the methods exposed by that should be later merged into phylib_stubs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230801142824.1772134-12-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net: phy: avoid kernel warning dump when stopping an errored PHYRussell King (Oracle)1-4/+7
When taking a network interface down (or removing a SFP module) after the PHY has encountered an error, phy_stop() complains incorrectly that it was called from HALTED state. The reason this is incorrect is that the network driver will have called phy_start() when the interface was brought up, and the fact that the PHY has a problem bears no relationship to the administrative state of the interface. Taking the interface administratively down (which calls phy_stop()) is always the right thing to do after a successful phy_start() call, whether or not the PHY has encountered an error. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+16
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24net: phy: Improved PHY error reporting in state machineFlorian Fainelli1-9/+24
When the PHY library calls phy_error() something bad has happened, and we halt the PHY state machine. Calling phy_error() from the main state machine however is not precise enough to know whether the issue is reading the link status or starting auto-negotiation. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-19net: phy: Ensure state transitions are processed from phy_stop()Florian Fainelli1-7/+16
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting the PHY state machine to PHY_HALTED. This invalidates the old_state != phydev->state condition in phy_state_machine() such that we will neither display the state change for debugging, nor will we invoke the link_change_notify() callback. Factor the code by introducing phy_process_state_change(), and ensure that we process the state change from phy_stop() as well. Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20net: phy: Add locks to ethtool functionsAndrew Lunn1-18/+66
The phydev lock should be held while accessing members of phydev, or calling into the driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: start using genphy_c45_ethtool_get/set_eee()Oleksij Rempel1-58/+2
All preparations are done. Now we can start using new functions and remove the old code. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: migrate phy_init_eee() to genphy_c45_eee_is_active()Oleksij Rempel1-75/+14
Reduce code duplicated by migrating phy_init_eee() to genphy_c45_eee_is_active(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: export phy_check_valid() functionOleksij Rempel1-2/+2
This function will be needed for genphy_c45_ethtool_get_eee() provided by next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-11drivers/net/phy: add connection between ethtool and phylib for PLCAPiergiorgio Beruto1-0/+192
This patch adds the required connection between netlink ethtool and phylib to resolve PLCA get/set config and get status messages. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-08ethtool: linkstate: add a statistic for PHY down eventsJakub Kicinski1-0/+1
The previous attempt to augment carrier_down (see Link) was not met with much enthusiasm so let's do the simple thing of exposing what some devices already maintain. Add a common ethtool statistic for link going down. Currently users have to maintain per-driver mapping to extract the right stat from the vendor-specific ethtool -S stats. carrier_down does not fit the bill because it counts a lot of software related false positives. Add the statistic to the extended link state API to steer vendors towards implementing all of it. Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly) enic also have a counter for this but I leave the implementation to their maintainers. Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-23net: phy: Add support for rate matchingSean Anderson1-0/+28
This adds support for rate matching (also known as rate adaptation) to the phy subsystem. The general idea is that the phy interface runs at one speed, and the MAC throttles the rate at which it sends packets to the link speed. There's a good overview of several techniques for achieving this at [1]. This patch adds support for three: pause-frame based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and 2BASE-TL), and open-loop-based (such as in 10GBASE-W). This patch makes a few assumptions and a few non assumptions about the types of rate matching available. First, it assumes that different phys may use different forms of rate matching. Second, it assumes that phys can use rate matching for any of their supported link speeds (e.g. if a phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T). Third, it does not assume that all interface modes will use the same form of rate matching. Fourth, it does not assume that all phy devices will support rate matching (even if some do). Relaxing or strengthening these (non-)assumptions could result in a different API. For example, if all interface modes were assumed to use the same form of rate matching, then a bitmask of interface modes supportting rate matching would suffice. For some better visibility into the process, the current rate matching mode is exposed as part of the ethtool ksettings. For the moment, only read access is supported. I'm not sure what userspace might want to configure yet (disable it altogether, disable just one mode, specify the mode to use, etc.). For the moment, since only pause-based rate adaptation support is added in the next few commits, rate matching can be disabled altogether by adjusting the advertisement. 802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and "rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls this feature "rate adaptation". I chose "rate matching" because it is shorter, and because Russell doesn't think "adaptation" is correct in this context. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30net: phy: Don't trigger state machine while in suspendLukas Wunner1-0/+23
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+6
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-10net: phy: Fix race condition on link status changeFrancesco Dolcini1-1/+6
This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: <stable@vger.kernel.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-02net: phy: Convert to mdiobus_c45_{read|write}Andrew Lunn1-7/+11
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2021-11-05net: phy: fix duplex out of sync problem while changing settingsHeiner Kallweit1-1/+6
As reported by Zhang there's a small issue if in forced mode the duplex mode changes with the link staying up [0]. In this case the MAC isn't notified about the change. The proposed patch relies on the phylib state machine and ignores the fact that there are drivers that uses phylib but not the phylib state machine. So let's don't change the behavior for such drivers and fix it w/o re-adding state PHY_FORCING for the case that phylib state machine is used. [0] https://lore.kernel.org/netdev/a5c26ffd-4ee4-a5e6-4103-873208ce0dc5@huawei.com/T/ Fixes: 2bd229df5e2e ("net: phy: remove state PHY_FORCING") Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/7b8b9456-a93f-abbc-1dc5-a2c2542f932c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25phy: phy_ethtool_ksettings_set: Lock the PHY while changing settingsAndrew Lunn1-1/+3
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_start_aneg: Add an unlocked versionAndrew Lunn1-6/+24
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Move after phy_start_anegAndrew Lunn1-53/+53
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn1-0/+2
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-2/+2
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: fix formatting issues with bracesWenpeng Liang1-2/+1
Fix following format issues: 1. open brace '{' following function definitions should go to the next line. 2. braces {} are not necessary for single line statements. 3. else should follow close brace '}'. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07net: phy: do not print dump stack if device was removedOleksij Rempel1-0/+3
In case phy_state_machine() works on top of USB device, we can get -ENODEV at any point. So, be less noisy if device was removed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-21net: phy: genphy_loopback: add link speed configurationOleksij Rempel1-1/+2
In case of loopback, in most cases we need to disable autoneg support and force some speed configuration. Otherwise, depending on currently active auto negotiated link speed, the loopback may or may not work. This patch was tested with following PHYs: TJA1102, KSZ8081, KSZ9031, AT8035, AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02net: phy: fix save wrong speed and duplex problem if autoneg is onGuangbin Huang1-2/+4
If phy uses generic driver and autoneg is on, enter command "ethtool -s eth0 speed 50" will not change phy speed actually, but command "ethtool eth0" shows speed is 50Mb/s because phydev->speed has been set to 50 and no update later. And duplex setting has same problem too. However, if autoneg is on, phy only changes speed and duplex according to phydev->advertising, but not phydev->speed and phydev->duplex. So in this case, phydev->speed and phydev->duplex don't need to be set in function phy_ethtool_ksettings_set() if autoneg is on. Fixes: 51e2a3846eab ("PHY: Avoid unnecessary aneg restarts") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPTHeiner Kallweit1-1/+1
Some internal PHY's have their events like link change reported by the MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario. I'm not too happy with this name. We don't ignore interrupts, typically there is no interrupt exposed at a PHY level. So let's rename it to PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is called from the MAC interrupt handler to handle PHY events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: phy: introduce phydev->portMichael Walle1-1/+1
At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-08net: phy: replace mutex_is_locked with lockdep_assert_held in phylibHeiner Kallweit1-1/+1
Switch to lockdep_assert_held(_once), similar to what is being done in other subsystems. One advantage is that there's zero runtime overhead if lockdep support isn't enabled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/ccc40b9d-8ee0-43a1-5009-2cc95ca79c85@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: phy: remove the .did_interrupt() and .ack_interrupt() callbackIoana Ciornei1-46/+2
Now that all the PHY drivers have been migrated to directly implement the generic .handle_interrupt() callback for a seamless support of shared IRQs and all the .config_inter() implementations clear any pending interrupts, we can safely remove the two callbacks. With this patch, phylib has a proper support for shared IRQs (and not just for multi-PHY devices. A PHY driver must implement both the .handle_interrupt() and .config_intr() callbacks for the IRQs to be actually used. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18net: phy: fix kernel-doc markupsMauro Carvalho Chehab1-1/+1
Some functions have different names between their prototypes and the kernel-doc markup. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06net: phy: export phy_error and phy_trigger_machineIoana Ciornei1-2/+4
These functions are currently used by phy_interrupt() to either signal an error condition or to trigger the link state machine. In an attempt to actually support shared PHY IRQs, export these two functions so that the actual PHY drivers can use them. Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: Andre Edich <andre.edich@microchip.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dan Murphy <dmurphy@ti.com> Cc: Divya Koppera <Divya.Koppera@microchip.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marco Felsch <m.felsch@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Mathias Kresin <dev@kresin.me> Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Michael Walle <michael@walle.cc> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Willy Liu <willy.liu@realtek.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-24net: phy: Document core PHY structuresAndrew Lunn1-1/+68
Add kerneldoc for the core PHY data structures, a few inline functions and exported functions which are not already documented. v2 Typos g/phy/PHY/s Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: phy: Do not warn in phy_stop() on PHY_DOWNFlorian Fainelli1-1/+1
When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-08net: phy: Uninline PHY ethtool statistics operationsFlorian Fainelli1-0/+48
Now that we have moved the PHY ethtool statistics to be dynamically registered, we no longer need to inline those for ethtool. This used to be done to avoid cross symbol referencing and allow ethtool to be decoupled from PHYLIB entirely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: make phy_disable_interrupts() non-staticJisheng Zhang1-1/+1
We face an issue with rtl8211f, a pin is shared between INTB and PMEB, and the PHY Register Accessible Interrupt is enabled by default, so the INTB/PMEB pin is always active in polling mode case. As Heiner pointed out "I was thinking about calling phy_disable_interrupts() in phy_init_hw(), to have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." Make phy_disable_interrupts() non-static so that it could be used in phy_init_hw() to have a defined init state. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Allow PHY cable test TDR data to configuredAndrew Lunn1-2/+3
Allow the user to configure where on the cable the TDR data should be retrieved, in terms of first and last sample, and the step between samples. Also add the ability to ask for TDR data for just one pair. If this configuration is not provided, it defaults to 1-150m at 1m intervals for all pairs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethtool: Add generic parts of cable test TDRAndrew Lunn1-1/+64
Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: mdiobus: add clause 45 mdiobus accessorsRussell King1-2/+2
There is a recurring pattern throughout some of the PHY code converting a devad and regnum to our packed clause 45 representation. Rather than having this scattered around the code, let's put a common translation function in mdio.h, and provide some register accessors. Convert the phylib core, phylink, bcm87xx and cortina to use these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19net: phy: simplify phy_link_change argumentsDoug Berger1-6/+6
This function was introduced to allow for different handling of link up and link down events particularly with regard to the netif_carrier. The third argument do_carrier allowed the flag to be left unchanged. Since then the phylink has introduced an implementation that completely ignores the third parameter since it never wants to change the flag and the phylib always sets the third parameter to true so the flag is always changed. Therefore the third argument (i.e. do_carrier) is no longer necessary and can be removed. This also means that the phylib phy_link_down() function no longer needs its second argument. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+5
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: phy: fix aneg restart in phy_ethtool_set_eeeHeiner Kallweit1-3/+5
phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8338e ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-10net: phy: Put interface into oper testing during cable testAndrew Lunn1-1/+11
Since running a cable test is disruptive, put the interface into operative state testing while the test is running. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: ethtool: Add infrastructure for reporting cable test resultsAndrew Lunn1-2/+20
Provide infrastructure for PHY drivers to report the cable test results. A netlink skb is associated to the phydev. Helpers will be added which can add results to this skb. Once the test has finished the results are sent to user space. When netlink ethtool is not part of the kernel configuration stubs are provided. It is also impossible to trigger a cable test, so the error code returned by the alloc function is of no consequence. v2: Include the status complete in the netlink notification message v4: Replace -EINVAL with -EMSGSIZE Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: phy: Add support for polling cable testAndrew Lunn1-0/+2
Some PHYs are not capable of generating interrupts when a cable test finished. They do however support interrupts for normal operations, like link up/down. As such, the PHY state machine would normally not poll the PHY. Add support for indicating the PHY state machine must poll the PHY when performing a cable test. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10net: phy: Add cable test support to state machineAndrew Lunn1-0/+76
Running a cable test is desruptive to normal operation of the PHY and can take a 5 to 10 seconds to complete. The RTNL lock cannot be held for this amount of time, and add a new state to the state machine for running a cable test. The driver is expected to implement two functions. The first is used to start a cable test. Once the test has started, it should return. The second function is called once per second, or on interrupt to check if the cable test is complete, and to allow the PHY to report the status. v2: Rename phy_cable_test_abort to phy_abort_cable_test Return different extack when already running test Use phy_init_hw() to reset the PHY Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-23 11:56:12 +0300