summaryrefslogtreecommitdiff
path: root/drivers/net/phy/dp83640.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-16net: phy: switch drivers to use dynamic feature detectionHeiner Kallweit1-1/+1
Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+10
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: dp83640: expire old TX-skbSebastian Andrzej Siewior1-3/+10
During sendmsg() a cloned skb is saved via dp83640_txtstamp() in ->tx_queue. After the NIC sends this packet, the PHY will reply with a timestamp for that TX packet. If the cable is pulled at the right time I don't see that packet. It might gets flushed as part of queue shutdown on NIC's side. Once the link is up again then after the next sendmsg() we enqueue another skb in dp83640_txtstamp() and have two on the list. Then the PHY will send a reply and decode_txts() attaches it to the first skb on the list. No crash occurs since refcounting works but we are one packet behind. linuxptp/ptp4l usually closes the socket and opens a new one (in such a timeout case) so those "stale" replies never get there. However it does not resume normal operation anymore. Purge old skbs in decode_txts(). Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn1-14/+1
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: remove flag PHY_HAS_INTERRUPT from driver configsHeiner Kallweit1-1/+0
Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: phy: Add phydev_info()Andrew Lunn1-5/+6
Add phydev_info() and make use of it within the phy drivers and core code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: phy: Add phydev_warn()Andrew Lunn1-3/+4
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: dp83640: Mark expected switch fall-throughsGustavo A. R. Silva1-1/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment at the top of the switch statement with a proper "fall through" annotation for each case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-2/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-09dp83640: Ensure against premature access to PHY registers after resetEsben Haabendal1-0/+18
The datasheet specifies a 3uS pause after performing a software reset. The default implementation of genphy_soft_reset() does not provide this, so implement soft_reset with the needed pause. Signed-off-by: Esben Haabendal <eha@deif.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: phy: remove generic settings for callbacks config_aneg and read_status ↵Heiner Kallweit1-2/+0
from drivers Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31dp83640: don't hold spinlock while calling netif_rx_niStefan Sørensen1-2/+5
We should not hold a spinlock while pushing the skb into the networking stack, so move the call to netif_rx_ni out of the critical region to where we have dropped the spinlock. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23net: dp83640: Avoid NULL pointer dereference.Richard Cochran1-1/+1
The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20dp83640: don't recieve time stamps twiceDan Carpenter1-2/+0
This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258ab93 ("dp83640: Delay scheduled work.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10ptp: dp83640: Use the high resolution frequency method.Richard Cochran1-7/+7
The dp83640 has a frequency resolution of about 0.029 ppb. This patch lets users of the device benefit from the increased frequency resolution when tuning the clock. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: dp83640: Fix tx timestamp overflow handling.Manfred Rudigier1-0/+17
PHY status frames are not reliable, the PHY may not be able to send them during heavy receive traffic. This overflow condition is signaled by the PHY in the next status frame, but the driver did not make use of it. Instead it always reported wrong tx timestamps to user space after an overflow happened because it assigned newly received tx timestamps to old packets in the queue. This commit fixes this issue by clearing the tx timestamp queue every time an overflow happens, so that no timestamps are delivered for overflow packets. This way time stamping will continue correctly after an overflow. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn1-2/+1
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn1-10/+12
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03dp83640: Only wait for timestamps for packets with timestamping enabled.Stefan Sørensen1-12/+13
In the packet timestamping function, check that the ptp version and protocol of the packet matches what we have configured the hardware to actually generate timestamps for, before looking/waiting for a timestamp. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03dp83640: Prune rx timestamp list before reading from itStefan Sørensen1-0/+1
The list of rx timestamps are currently only pruned of old entries when a new entry is inserted. If no new entries are added, old timestamps may survive beyond their lifetime, possible causing them to be attached to packets with the same sequence number after a rollover. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03dp83640: Delay scheduled work.Stefan Sørensen1-8/+12
Currently rx_timestamp_work reschedules itself as a regular workqueue item, effectively causing it run constantly as long as there are packets left in the queue. Fix by using delayed workqueue items, limiting it to run only every two jiffies. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03dp83640: Include hash in timestamp/packet matchingStefan Sørensen1-3/+15
Only using the message type and sequence id for matching timestamps with packets is error prone, as multiple clients may very well be sending packets with the same messagetype and timestamp at the same time. Fix by extending the check to include the hash of bytes 20-29 (source id in PTPv2) that is provided with the timestamps. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-18dp83640: only report generic filters in ts_infoJacob Keller1-9/+1
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-26net: dp83640: fix improper double spin locking.Richard Cochran1-2/+2
A pair of nested spin locks was introduced in commit 63502b8d0 "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-26net: dp83640: reinforce locking rules.Richard Cochran1-1/+16
Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-26net: dp83640: fix broken calibration routine.Richard Cochran1-1/+1
Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-9/+10
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
2015-03-31ptp: dp83640: convert to the 64 bit get/set time methods.Richard Cochran1-9/+10
This device stores the number of seconds in a 32 bit register, and the stored value is unsigned. Therefore this driver and device are ready for the year 2038. However, more work will be needed prior to 2106. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07treewide: Fix typo in printk messagesMasanari Iida1-1/+1
This patch fix spelling typo in printk messages. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-12net: ptp: fix time stamp matching logic for VLAN packets.Richard Cochran1-2/+2
Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the code in two drivers that matches time stamps with PTP frames, with the goal of allowing VLAN tagged PTP packets to receive hardware time stamps. However, that commit failed to account for the VLAN header when parsing IPv4 packets. This patch fixes those two drivers to correctly match VLAN tagged IPv4/UDP PTP messages with their time stamps. This patch should also be applied to v3.17. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09dp83640: Make use of skb_queue_purge instead of reimplementing the codeAlexander Duyck1-6/+2
This change makes it so that dp83640_remove can use skb_queue_purge instead of looping through itself to flush any entries out of the queue. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-06net-timestamp: Make the clone operation stand-alone from phy timestampingAlexander Duyck1-3/+3
The phy timestamping takes a different path than the regular timestamping does in that it will create a clone first so that the packets needing to be timestamped can be placed in a queue, or the context block could be used. In order to support these use cases I am pulling the core of the code out so it can be used in other drivers beyond just phy devices. In addition I have added a destructor named sock_efree which is meant to provide a simple way for dropping the reference to skb exceptions that aren't part of either the receive or send windows for the socket, and I have removed some duplication in spots where this destructor could be used in place of sock_edemux. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22dp83640: Fix length check for event timestamp status messagesChristian Riesch1-8/+15
Event timestamp status messages have a variable length, ranging from 1 to 5 words (16 bit words). The current code however requires a minimum message length of sizeof(*phy_txts). In most cases this condition is fulfilled due to padding bytes. However, if several events are signaled in a single message, padding bytes may not be present. For short event timestamp status messages, the length check will fail, and the event timestamp will be dropped. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23dp83640: Fix receive timestamp race conditionStefan Sørensen1-71/+102
When timestamping received packets, rx_timestamp_work may be scheduled before the timestamps is received from the hardware resulting in the packet beeing delivered without the timestamp. This is fixed by changing the receive timestamp path: On receiving a packet that need timestamping, the rxts list is traversed. If a match is found, packet+timestamp are delivered, otherwise the packet is added to a rx_queue. When a timestamp arrives rx_queue is traversed and if a matching packet is found, it is delivered with the timestamp. Otherwise the timestamp is added to the rxts list for matching with packets arriving later. In case the hardware drops a timestamp, a workqueue regularly checks the queue for old packets and delivers them without a timestamp. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-12dp83640: Adjust ptp event timestampsStefan Sørensen1-0/+3
Event timestamp values should be adjusted by 3*reference clock period + 11 ns = 35 ns to compensate for input path and synchronization delays. So subtract 35ns from event timestamps. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10dp83640: Always decode received status framesStefan Sørensen1-3/+3
Currently status frames are only handled when packet timestamping is enabled, but status frames are also needed for pin event timestamping. Fix by moving packet timestamping check to after status frame decode. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08ptp: Classify ptp over ip over vlan packetsStefan Sørensen1-25/+21
This extends the ptp bpf to also match ptp over ip over vlan packets. The ptp classes are changed to orthogonal bitfields representing version, transport and vlan values to simplify matching. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02dp83640: Get calibration pin with ptp_find_pinStefan Sørensen1-1/+5
For consistency, use the ptp_find_pin function to get the calibration pin, not gpio_tab. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02dp83640: Verify calibration pin assignmentStefan Sørensen1-0/+10
This constraints the pin assignment to not allow the calibration function to be reassigned and only allow reassigning the calibratin pin if only one phy is connected. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02dp83640: Increase supported perout pins to 7Stefan Sørensen1-9/+9
This patch increases the number of supported periodic output pins from 1 to 7. The last pin is reserved for sync. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02dp83640: Program pulsewidth2 values of perout triggers 0 and 1Stefan Sørensen1-0/+5
Periodic output triggers 0 and 1 of the dp83640 has a programmable duty-cycle which is controlled by the Pulsewidth2 field of the trigger data register. This field is not documented in the datasheet, but it is described in the "PHYTER Software Development Guide" section 3.1.4.1. Failing to set the field can result in unstable/no trigger output. Add programming of the Pulsewidth2 field, setting it to the same value as the Pulsewidth field for a 50% duty cycle. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-02net: ptp: move PTP classifier in its own fileDaniel Borkmann1-0/+1
This commit fixes a build error reported by Fengguang, that is triggered when CONFIG_NETWORK_PHY_TIMESTAMPING is not set: ERROR: "ptp_classify_raw" [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.ko] undefined! The fix is to introduce its own file for the PTP BPF classifier, so that PTP_1588_CLOCK and/or NETWORK_PHY_TIMESTAMPING can select it independently from each other. IXP4xx driver on ARM needs to select it as well since it does not seem to select PTP_1588_CLOCK or similar that would pull it in automatically. This also allows for hiding all of the internals of the BPF PTP program inside that file, and only exporting relevant API bits to drivers. This patch also adds a kdoc documentation of ptp_classify_raw() API to make it clear that it can return PTP_CLASS_* defines. Also, the BPF program has been translated into bpf_asm code, so that it can be more easily read and altered (extensively documented in [1]). In the kernel tree under tools/net/ we have bpf_asm and bpf_dbg tools, so the commented program can simply be translated via `./bpf_asm -c prog` where prog is a file that contains the commented code. This makes it easily readable/verifiable and when there's a need to change something, jump offsets etc do not need to be replaced manually which can be very error prone. Instead, a newly translated version via bpf_asm can simply replace the old code. I have checked opcode diffs before/after and it's the very same filter. [1] Documentation/networking/filter.txt Fixes: 164d8c666521 ("net: ptp: do not reimplement PTP/BPF classifier") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21dp83640: let the periodic pin from the module parameter be a default.Richard Cochran1-6/+13
This patch changes the driver use the new pin configuration method when programming the periodic output signal. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21dp83640: let external input pins from the module parameters be defaults.Richard Cochran1-1/+4
This patch changes the driver to use the new pin configuration method when programming the external time stamp input signals. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21dp83640: implement programmable pin functions.Richard Cochran1-0/+52
This patch adapts the dp83640 driver to allow reconfiguration of which auxiliary function goes on which pin. The functions may be reassigned freely with the one exception of the calibration function. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21dp83640: correct the periodic output frequencyRichard Cochran1-5/+6
The phyter driver incorrectly feeds the value of the period into what is in fact a pulse width register, resulting in the actual period being twice the dialed value. This patch fixes the issue and renames a variable to make the code at bit more clear. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21dp83640: trivial fixesRichard Cochran1-3/+3
This patch cleans up the input checking code on the external time stamp function by using an unsigned rather than a signed channel index. Also, this patch corrects the author's email address. When this macro was last changed, the top level domain part of the email address was left behind. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net:phy:dp83640: Move all HW initialization to dp83640_config_initStefan Sørensen1-5/+8
phy_init_hw not does a full PHY reset after the driver probe has finished, so any hw initialization done in the probe will be lost. Part of the timestamping functionality of the dp83640 is set up in the probe and with that lost, enabling timestamping will cause a PHY lockup, requiring a hard reset / power cycle to recover. This patch moves all the HW initialization in dp83640_probe to dp83640_config_init. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-05net:phy:dp83640: Initialize PTP clocks at device init.Stefan Sørensen1-5/+8
The trigger and events functionality can be useful even if packet timestamping is not used, but the required PTP clock is only enabled when packet timestamping is started. This patch moves the clock enable to when the interface is configured. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 13:23:23 +0300