summaryrefslogtreecommitdiff
path: root/drivers/net/mlx4
AgeCommit message (Collapse)AuthorFilesLines
2009-09-16mlx4: Fix access to freed memoryVitaliy Gusev1-3/+8
catas_reset() uses pointer to mlx4_priv, but mlx4_priv is not valid after call mlx4_restart_one(). Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds6-118/+52
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
2009-09-06mlx4_core: Distinguish multiple devices in /proc/interruptsArputham Benjamin1-8/+26
When the mlx4 driver uses the same name for interrupts for every device in the system. This can make it very confusing trying to work out exactly which device MSI-X interrupts are for. Change the driver to add the PCI name of the device to the interrupt name. Signed-off-by: Arputham Benjamin <abenjamin@sgi.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06mlx4_core: Avoid double free_icmsYevgeny Petrilin1-1/+1
On the error path of mlx4_init_hca(), mlx4_close_hca() is called, followed by mlx4_free_icms() and mlx4_UNMAP_FA(). But both those functions are also called from mlx4_close_hca(), which leads to a double free. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06mlx4_core: Allocate and map sufficient ICM memory for EQ contextRoland Dreier3-51/+7
The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06mlx4_core: Remove unnecessary includes of <linux/init.h>Roland Dreier10-13/+0
Lots of mlx4 files with no function annotations included <linux/init.h> for no reason. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06mlx4_core: Use pci_request_regions()Roland Dreier1-18/+8
The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-02Merge branch 'master' of ↵David S. Miller1-2/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/yellowfin.c
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger2-2/+2
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-24drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng1-2/+3
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of "A functions set" in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use "B functions set" to prevent the irqs from getting enabled while in netpoll_send_skb(). A functions set: local_irq_disable()/local_irq_enable() spin_lock_irq()/spin_unlock_irq() spin_trylock_irq()/spin_unlock_irq() B functions set: local_irq_save()/local_irq_restore() spin_lock_irqsave()/spin_unlock_irqrestore() spin_trylock_irqsave()/spin_unlock_irqrestore() Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13Merge branch 'master' of ↵David S. Miller4-4/+13
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-10mlx4_en: Fix read buffer overflow in mlx4_en_complete_rx_desc()roel kluin1-2/+3
If the length is less or equal to frag_prefix_size in the first iteration we write skb_frags_rx[-1] and read from priv->frag_info[-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07mlx4_en: Not using Shared Receive QueuesYevgeny Petrilin5-73/+26
We use 1:1 mapping between QPs and SRQs on receive side, so additional indirection level not required. Allocated the receive buffers for the RSS QPs. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07mlx4_en: Using real number of rings as RSS map sizeYevgeny Petrilin4-41/+16
There is no point in using more QPs then actual number of receive rings. If the RSS function for two streams gives the same result modulo number of rings, they will arrive to the same RX ring anyway. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07mlx4_en: Adaptive moderation policy changeYevgeny Petrilin1-3/+9
If the net device is identified as "sender" (number of sent packets is higher then the number of received packets and the incoming packets are small), set the moderation time to its low limit. We do it because the incoming packets are acks, and we don't want to delay them Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) ehea: Fix napi list corruption on ifconfig down igbvf: Allow VF driver to correctly recognize failure to set mac 3c59x: Fix build failure with gcc 3.2 sky2: Avoid transmits during sky2_down() iwlagn: do not send key clear commands when rfkill enabled libertas: Read buffer overflow drivers/net/wireless: introduce missing kfree drivers/net/wireless/iwlwifi: introduce missing kfree zd1211rw: fix unaligned access in zd_mac_rx cfg80211: fix regression on beacon world roaming feature cfg80211: add two missing NULL pointer checks ixgbe: Patch to modify 82598 PCIe completion timeout values bluetooth: rfcomm_init bug fix mlx4_en: Fix double pci unmapping. mISDN: Fix handling of receive buffer size in L1oIP pcnet32: VLB support fixes pcnet32: remove superfluous NULL pointer check in pcnet32_probe1() net: restore the original spinlock to protect unicast list netxen: fix coherent dma mask setting mISDN: Read buffer overflow ...
2009-08-03mlx4_en: Fix double pci unmapping.Yevgeny Petrilin1-0/+1
In cases of fragmented skb, with the data pointers being wrapped around the TX buffer, the completion handling code would not forward the data pointer and the firs fragment was unmapped several times, while others were not unmapped at all. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-24Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
2009-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) sky2: Avoid races in sky2_down drivers/net/mlx4: Adjust constant drivers/net: Move a dereference below a NULL test drivers/net: Move a dereference below a NULL test connector: maintainer/mail update. USB host CDC Phonet network interface driver macsonic, jazzsonic: fix oops on module unload macsonic: move probe function to .devinit.text can: switch carrier on if device was stopped while in bus-off state can: restart device even if dev_alloc_skb() fails can: sja1000: remove duplicated includes New device ID for sc92031 [1088:2031] 3c589_cs: re-initialize the multicast in the tc589_reset Fix error return for setsockopt(SO_TIMESTAMPING) netxen: fix thermal check and shutdown netxen: fix deadlock on dev close netxen: fix context deletion sequence net: Micrel KS8851 SPI network driver tcp: Use correct peer adr when copying MD5 keys tcp: Fix MD5 signature checking on IPv4 mapped sockets ...
2009-07-22drivers/net/mlx4: Adjust constantJulia Lawall1-1/+1
The values in the advertising field are typically ADVERTISED_xxx, not SUPPORTED_xxx. Both SUPPORTED_10000baseT_Full and ADVERTISED_1000baseT_Full have the same value. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct ethtool_cmd E; @@ *E.advertising = SUPPORTED_10000baseT_Full // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-07mlx4_core: Add new ConnectX EN PCI ID 0x6764Yevgeny Petrilin1-0/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-07mlx4_core: Handle multi-physical function devicesYevgeny Petrilin2-2/+8
MT26468 (PCI ID 0x6764) devices can expose multiple physical functions. The current driver only handles the primary physical function. For other functions, the QUERY_FW firmware command will fail with the CMD_STAT_MULTI_FUNC_REQ error code. Don't try to drive such devices, but print a message saying the driver is skipping those devices rather than just "QUERY_FW command failed." Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> [ Rather than keeping unsupported devices bound to the driver, simply print a more informative error message and exit - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06net: convert remaining non-symbolic return values in ndo_start_xmit() functionsPatrick McHardy1-1/+1
This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23Merge branch 'for-linus' of ↵Linus Torvalds1-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Add __init/__exit macros to addr.c and cma.c IB/ehca: Bump version number mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() calls IB/mthca: Replace dma_sync_single() use with proper functions RDMA/nes: Fix FIN state handling under error conditions RDMA/nes: Fix max_qp_init_rd_atom returned from query device IB/ehca: Ensure that guid_entry index is not negative IB/ehca: Tolerate dynamic memory operations before driver load
2009-06-23mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() callsRoland Dreier1-4/+10
Commit 5d23a1d2 ("net: replace dma_sync_single with dma_sync_single_for_cpu") replaced uses of the deprectated function dma_sync_single() with calls to dma_sync_single_for_cpu(). However, to be correct, the code should do a sync for_cpu() before touching the memory and for_device() after it's done. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-22mlx4_en: Remove redundant refill code on RXYevgeny Petrilin3-102/+0
Our RX rings are always full, there is no need to check whether we need to fill them or not. If we fail to allocate a new socket buffer, the incoming packet is dropped an the ring remains full. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-22mlx4_en: Removed redundant check on lso header sizeYevgeny Petrilin2-6/+0
This check that verifies that the LSO header along with control segment and first data segment do not cross 128 bytes is no longer required. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-22mlx4_en: Cancel port_up check in transmit functionYevgeny Petrilin2-9/+2
When closing the port, we stop all transmit queues under the transmit lock. It ensures that we will not attempt to transmit new packets after the physical port was closed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-22mlx4_en: using stop/start_all_queuesYevgeny Petrilin1-2/+2
After we moved to be a multi queue device, need to stop/start all of our transmit queues. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-22mlx4_en: Removed redundant skb->len checkYevgeny Petrilin1-4/+0
We don't need this check in the transmit function Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-22mlx4_en: Counting all the dropped packets on the TX sideYevgeny Petrilin1-7/+8
Reporting the counter's value through 'ethtool -S' Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15Merge branch 'master' of ↵David S. Miller5-8/+20
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-15Merge branch 'for-linus' of ↵Linus Torvalds4-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTx IB/mlx4: Add strong ordering to local inval and fast reg work requests IB/ehca: Remove superfluous bitmasks from QP control block RDMA/cxgb3: Limit fast register size based on T3 limitations RDMA/cxgb3: Report correct port state and MTU mlx4_core: Add module parameter for number of MTTs per segment IB/mthca: Add module parameter for number of MTTs per segment RDMA/nes: Fix off-by-one bugs in reset_adapter_ne020() and init_serdes() infiniband: Remove void casts IB/ehca: Increment version number IB/ehca: Remove unnecessary memory operations for userspace queue pairs IB/ehca: Fall back to vmalloc() for big allocations IB/ehca: Replace vmalloc() with kmalloc() for queue allocation
2009-06-15Merge branches 'cxgb3', 'ehca', 'misc', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier4-7/+19
2009-06-15mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTxRoland Dreier1-1/+3
When both MSI-X and legacy INTx fail to generate an interrupt, the driver frees the MSI-X interrupts twice. Fix this by clearing the have_irq flag for the MSI-X interrupts when they are freed the first time. This is the same bug that was reported in ib_mthca by Yinghai Lu <yhlu.kernel@gmail.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-12trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in ↵Martin Olsson1-1/+1
documentation and source comments. Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-08mlx4: FIX error flow when initializing EQ tableYevgeny Petrilin1-1/+3
If mlx4_create_eq() would fail for one of EQ's assigned for completion handling, the code would try to free the same EQ we failed to create. The crash was found by Christoph Lameter Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03Merge branch 'master' of ↵David S. Miller1-4/+4
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/forcedeth.c
2009-06-02mlx4_en: Updated driver versionYevgeny Petrilin1-2/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Added vlan_features supportYevgeny Petrilin1-0/+4
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: multiqueue supportYevgeny Petrilin4-71/+28
By default the driver opens 8 TX queues (defined by MLX4_EN_NUM_TX_RINGS). If the driver is configured to support Per Priority Flow Control, we open 8 additional TX rings. dev->real_num_tx_queues is always set to be MLX4_EN_NUM_TX_RINGS. The mlx4_en_select_queue() function uses standard hashing (skb_tx_hash) in case that PPFC is not supported or the skb contain a vlan tag, otherwise the queue is selected according to vlan priority. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Coalescing target is equal for all mtu'sYevgeny Petrilin3-5/+4
The interrupt moderation should not depend on number of incoming bytes, but on number of incoming packets. The previous scheme caused very high interrupts rate for small messages when big MTU was configured. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Work with part of the ports.Yevgeny Petrilin1-18/+1
If the initialization of one of the ports failed, there is no need to fail the other one as well. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en renamed en_params.c to en_ethtool.cYevgeny Petrilin2-1/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Moved all module parameters handling to en_main.cYevgeny Petrilin3-60/+54
en_params.c file now only handles Ethtool functionality Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Giving interface name in debug messagesYevgeny Petrilin5-156/+159
For each debug message, the message will show interface name in case that the net device was registered, and PCI bus ID with port number if we were not registered yet. Messages that are not port/netdev specific stayed in the old format Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-30mlx4_en: Fix a kernel panic when waking tx queueYevgeny Petrilin1-4/+4
When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: replace dma_sync_single with dma_sync_single_for_cpuFUJITA Tomonori1-3/+4
This replaces dma_sync_single() with dma_sync_single_for_cpu() because dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says: /* Backwards compat, remove in 2.7.x */ #define dma_sync_single dma_sync_single_for_cpu #define dma_sync_sg dma_sync_sg_for_cpu Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_start in 10GB driversEric Dumazet1-1/+0
Followup of commits 9d21493b4beb8f918ba248032fefa393074a5e2b and 08baf561083bc27a953aa087dd8a664bb2b88e8e (net: tx scalability works : trans_start) (net: txq_trans_update() helper) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Multi queue drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers (vxge & tehuti) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28mlx4_core: Add module parameter for number of MTTs per segmentEli Cohen3-6/+16
The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 15:59:47 +0300