summaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_82599.c
AgeCommit message (Collapse)AuthorFilesLines
2011-03-08ixgbe: Enable flow control pause parameter auto-negotiation supportEmil Tantilov1-0/+3
This patch enables flow control pause parameters auto-negotiation support to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics modules at 1G speed Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: cleanup PHY initEmil Tantilov1-50/+71
This change cleans up several situations in which we were either stepping over possible errors, or calling initialization routines multiple times. Also includes whitespace fixes where applicable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup copyright string for 2011Don Skidmore1-1/+1
Updating the copyrights for 2011 as well as make the ixgbe_copyright string a constant. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: add function pointer for semaphore functionDon Skidmore1-1/+5
The X540 devices grabs semaphores differently than 82599 and 82598 devices do. They do however also grab them in allot of the same functions. So I'm adding a new MAC operation function pointer to allow us to use the correct function based on our MAC type. I'm also changing all the semaphore calls to use this new function pointer. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: store permanent address before initializing Rx addressesEmil Tantilov1-3/+3
We were reading the address after it had been initialized and this results in the permanent address on the system being changed. This change corrects that by storing the address before we re-initialize it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Numerous whitespace / formatting cleanupsEmil Tantilov1-10/+9
This patch contains a number of whitespace and formatting cleanups. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Drop unused code for setting up unicast addressesEmil Tantilov1-1/+0
This change removes the unused code that was setting up the uc_addr_list. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Add ability to double reset on failure to clear master enableEmil Tantilov1-5/+15
Double resets are required for recovery from certain error conditions. Between resets, it is necessary to stall to allow time for any pending HW events to complete. We use 1usec since that is what is needed for ixgbe_disable_pcie_master(). The second reset then clears out any effects of those events. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: set media type for 82599 T3 LOMEmil Tantilov1-10/+40
The media type was not being set for the 82599 T3 LAN on motherboard. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-10ixgbe: update ntuple filter configurationAlexander Duyck1-300/+136
This change fixes several issues found in ntuple filtering while I was doing the ATR refactor. Specifically I updated the masks to work correctly with the latest version of ethtool, I cleaned up the exception handling and added detailed error output when a filter is rejected, and corrected several bits that were set incorrectly in ixgbe_type.h. The previous version of this patch included a printk that was left over from me fixing the filter setup. This patch does not include that printk. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10ixgbe: further flow director performance optimizationsAlexander Duyck1-13/+99
This change adds a compressed input type for atr signature hash computation. It also drops the use of the set functions when setting up the ATR input since we can then directly setup the hash input as two dwords that can be stored and passed as registers. With these changes the cost of computing the has is low enough that we can perform a hash computation on each TCP SYN flagged packet allowing us to drop the number of flow director misses considerably in tests such as netperf TCP_CRR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10ixgbe: cleanup flow director hash computation to improve performanceAlexander Duyck1-209/+126
This change cleans up the layout of the flow director data, and the algorithm used to calculate the hash resulting in a 35x / 3500% performance increase versus the old flow director hash computation. The overall effect is only a 1% increase in transactions per second though due to the fact that only 1 packet in 20 are actually hashed upon. TCP_RR before: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23059.27 16384 87380 TCP_RR after: Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 60.00 23239.98 16384 87380 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25ixgbe: Add anti-spoofing feature supportGreg Rose1-0/+2
Add support for the anti-spoofing feature in the HW. Packets from VF devices with spoofed MAC addresses or VLAN tags will be blocked and a counter incremented. During the watchdog timer the spoofed packet dropped counter is read and if it is non-zero then a warning message is displayed on the host VMM's console. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-07ixgbe: fix for link failure on SFP+ DA cablesDon Skidmore1-3/+25
This patch helps prevent FW/SW semaphore collision from leading to link establishment failure. The collision might mess up the PHY registers so we reset the PHY. However there are SFI/KR areas in the PHY that are not reset with a Reset_AN so we need to change LMS to reset it. Also wait until AN state machine is AN_GOOD Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03ixgbe: add support for 82599 FCoE SKUDon Skidmore1-0/+2
Add both NIC and backplane support for FCoE enabled devices IDs. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03ixgbe: fix link behavior for SFP+ when driver is brought downDon Skidmore1-3/+9
We have had several requests to have ifconfig down command disable the SFP+ laser and thus make link go down. Likewise on ifconfig up the laser would be enabled and link would come up. This patch enables that behavior. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17ixgbe: add MAC and PHY support for x540Don Skidmore1-1/+7
Adds the new x540.c file and Aquantia 1202 PHY for X540 support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-11-17ixgbe: make silicon specific functions genericDon Skidmore1-82/+4
The new MAC type X540 shares much of the same functionality of some silicon specific functions. To reduce duplicate code, made these functions generic. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König1-2/+2
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-14ixgbe: declare functions as staticEmil Tantilov1-15/+15
Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14ixgbe: remove unused functionsEmil Tantilov1-147/+0
Remove functions that are declared, but not used in the driver. This patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-18ethtool, ixgbe: Move RX n-tuple mask fixup to ethtoolBen Hutchings1-43/+14
The ethtool utility does not set masks for flow parameters that are not specified, so if both value and mask are 0 then this must be treated as equivalent to a mask with all bits set. Currently that is done in the only driver that implements RX n-tuple filtering, ixgbe. Move it to the ethtool core. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-06ixgbe: use netif_<level> instead of netdev_<level>Emil Tantilov1-1/+1
This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 849c45423c0c108e08d67644728cc9b0ed225fa1 CC: Joe Perches <joe@perches.com> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-01ixgbe: add 1g PHY support for 82599Don Skidmore1-0/+13
Add support for 1G SFP+ PHY's to 82599. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-04ixgbe: Use netdev_<level>, dev_<level>, pr_<level>Emil Tantilov1-3/+2
This patch is alternative to a previous patch submitted by Joe Perches. Create common macros e_<level> and e_dev_<level> that use netdev_<level> and dev_<level> similar to e1000e. Redefined pr_fmt for driver messages. Use %pM to display MAC address. Aligned text to better match the new format. CC: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-21ixgbe:add support for a new 82599 10G Base-T deviceMallikarjuna R Chilakala1-0/+1
This adds support for a new copper device for 82599, device id 0x151c. This 82599 10GBase-T device uses the PHY's internal temperature sensor to guard against over-temp conditions. In this scenario the PHY will be put in a low power mode and link will no longer be able to transmit or receive any data. When this occurs, the over-temp interrupt is latched and driver logs this error message. A HW reset or power cycle is required to clear this status. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-19ixgbe: add support for active DA cablesDon Skidmore1-2/+6
This patch adds support of active DA cables. This is renaming and adding some PHY type enumerations. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14ixgbe: Refactor common code between 82598 & 82599 to accommodate new hardwareMallikarjuna R Chilakala1-392/+11
Some of the following MAC functions are moved from 82598 & 82599 specific hardware files to common.[ch] to accommodate new silicon changes. Also fixed some white space issues * get_san_mac_addr, check_link, set_vmdq, clear_vmdq, clear_vfta, * set_vfta, fc_enable, init_uta_tables Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28ixgbe: Properly display 1 gig downshift warning for backplaneAnjali Singhai1-0/+5
Description: When using Intel smartspeed, the patch displays a warning when the link down shifts to 1 Gig. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Merge branch 'master' of ↵David S. Miller1-14/+48
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz1-14/+48
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25net/intel: remove trailing space in messagesFrans Pop1-1/+1
Includes one minor indentation fix to placate checkpatch. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala1-36/+42
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16ixgbe: Cleanup incorrect header commentsPeter Waskiewicz1-5/+0
The recent n-tuple patches added some comments to the headers of the Flow Director functions that aren't accurate. This cleans them up, and is a purely cosmetic patch. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-11ixgbe: Add support for the new ethtool n-tuple programming interfacePeter Waskiewicz1-13/+93
This patch adds n-tuple filter programming to 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23ixgbe: Allow the VF driver to be loaded before the PF driverGreg Rose1-5/+1
The PF Reset Done bit should not be set in the extended control register until the PF has actually completed the bring up process. It is a mis- interpretation of the purpose of this bit to assume it should be set when the physical reset of the device is done. Instead it should be used to indicate to the VFs when the PF is ready to provide them with required services. This is not until after the PF is finished coming up and ready to process mailbox events. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-14ixgbe: update copyright datesShannon Nelson1-1/+1
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-11ixgbe: Add SR-IOV feature enablement codeGreg Rose1-58/+68
Adds code to the core 82599 module to support SR-IOV features of the 82599 network controller Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-09ixgbe: add support for 82599 KR device 0x1517Don Skidmore1-0/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ixgbe: Add support for 82599 alternative WWNN/WWPN prefixYi Zou1-0/+50
The 82599 EEPROM supports alternative prefix for World Wide Node Name (WWNN) and World Wide Port Name (WWPN). The prefixes can be used together with the SAN MAC address to form the WWNN and WWPN, which can be used by upper layer drivers such as Fiber Channel over Ethernet (FCoE). Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09ixgbe: Fix KR to KX fail over for Mezzanine cardsDon Skidmore1-3/+124
This patch allows the recently added backplane device IDs that support KR to fail over to KX during link setup. This is accomplished by the new MAC link setup function ixgbe_setup_mac_link_smartspeed(). Comments were also updated to better document the reason for the delays chosen for KX, KX4, BX, BX4 and KR connections. Signed-off-by: Don Skidmore <don.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09ixgbe: add support for 82599 based Express Module X520-P2Don Skidmore1-0/+1
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz cardDon Skidmore1-0/+1
This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card. Signed-off-by: Don Skidmore<donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05ixgbe: add support for 82599 Combined BackplaneDon Skidmore1-0/+1
This patch will add support for the 82599 Dual port Backplane device (0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15ixgbe: Create separate media type for CX4 adaptersPeter P Waskiewicz Jr1-1/+1
Currently the media type detection for CX4 adapters lumps them into a type of fiber. This causes some strange fallout when firmware verification is done on the NIC, and certain fiber NIC rules get enforced incorrectly. This patch introduces a new media type for CX4, and puts both 82598 and 82599 CX4 adapters into this bucket. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15ixgbe: Add support for 82599-based CX4 adaptersPeter P Waskiewicz Jr1-0/+3
This patch adds support for CX4 adapters based on 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02ixgbe: Patch to fix 82599 multispeed fiber link issues when driver is loaded ↵Mallikarjuna R Chilakala1-11/+11
without any cable and reconnecting it to 1G partner In 82599 multi speed fiber case when driver is loaded without any cable and reconnecting the cable with a 1G partner does not bring up the link in 1Gb mode. When there is no link we first setup the link at 10G & 1G and then try to re-establish the link at highest speed 10G and thereby changing autoneg_advertised value to highest speed 10G. After connecting back the cable to a 1G link partner we never try 1G as autoneg advertised value is changed to link at 10G only. The following patch fixes the issue by properly initializing the autoneg_advertised value just before exiting from link setup routine. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02ixgbe: refactor link setup codeMallikarjuna R Chilakala1-90/+45
Link code cleanup: a number of redundant functions and MAC variables are cleaned up, with some functions being consolidated into a single-purpose code path. Removed following deprecated link functions and mac variables * ixgbe_setup_copper_link_speed_82598 * ixgbe_setup_mac_link_speed_multispeed_fiber * ixgbe_setup_mac_link_speed_82599 * mac.autoneg, mac.autoneg_succeeded, phy.autoneg_wait_to_complete Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 18:14:29 +0300