| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit e11ec2b868af2b351c6c1e2e50eb711cc5423a10 upstream.
Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel. Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.
Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock. The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity. Unused transactions are not normally
expected (except in error cases).
The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges. In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries. If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction. Something similar occurs when we zero routing table
entries for the modem.
By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.
Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors). This patch addresses
only the underflows that Google originally reported.
Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6c75dc94f2b27fff57b305af9236eea181a00b6c ]
In gsi_trans_pool_init_dma(), the total size of a pool of memory
used for DMA transactions is calculated. However the calculation is
done incorrectly.
For 4KB pages, this total size is currently always more than one
page, and as a result, the calculation produces a positive (though
incorrect) total size. The code still works in this case; we just
end up with fewer DMA pool entries than we intended.
Bjorn Andersson tested booting a kernel with 16KB pages, and hit a
null pointer derereference in sg_alloc_append_table_from_pages(),
descending from gsi_trans_pool_init_dma(). The cause of this was
that a 16KB total size was going to be allocated, and with 16KB
pages the order of that allocation is 0. The total_size calculation
yielded 0, which eventually led to the crash.
Correcting the total_size calculation fixes the problem.
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Fixes: 9dd441e4ed57 ("soc: qcom: ipa: GSI transactions")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230328162751.2861791-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2df181f09c961377a55510a864216d48d787fe49 ]
Starting at IPA v4.11, the GSI_GENERIC_COMMAND GSI register got a
new PARAMS field. The code that encodes a value into that field
sets it unconditionally, which is wrong.
We currently only provide 0 as the field's value, so this error has
no real effect. Still, it's a bug, so let's fix it.
Fix an (unrelated) incorrect comment as well. Fields in the
ERROR_LOG GSI register actually *are* defined for IPA versions
prior to v3.5.1.
Fixes: fe68c43ce388 ("net: ipa: support enhanced channel flow control")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ec9b2a30853ba843b70ea16f196e5fe3327be5f ]
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
IPA v3.1 doesn't support the IDLE_INDICATION_CFG register, this was
causing a harmless splat in ipa_idle_indication_cfg(), add a version
check to prevent trying to fetch this register on v3.1
Fixes: 6a244b75cfab ("net: ipa: introduce ipa_reg()")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Tested-by: Jami Kettunen <jami.kettunen@somainline.org>
Link: https://lore.kernel.org/r/20221024234850.4049778-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The resource group limits for IPA v3.1 mistakenly used 6 bit wide mask
values, when the hardware actually uses 8. Out of range values were
silently ignored before, so the IPA worked as expected. However the
new generalised register definitions introduce stricter checking here,
they now cause some splats and result in the value 0 being written
instead. Fix the limit bitmask widths so that the correct values can be
written.
Fixes: 1c418c4a929c ("net: ipa: define resource group/type IPA register fields")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Tested-by: Jami Kettunen <jami.kettunen@somainline.org>
Link: https://lore.kernel.org/r/20221024210336.4014983-2-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some resource limits on IPA v3.5.1 have their max values set to
255, this causes a few splats in ipa_reg_encode and prevents the
IPA from booting properly. The limits are all 6 bits wide so
adjust the max values to 63.
Fixes: 1c418c4a929c ("net: ipa: define resource group/type IPA register fields")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20221024210336.4014983-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some source files state copyright dates that are earlier than the
last modification of the file. Change the copyright year to 2022 in
all such cases.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch just updates comments throughout the IPA code.
Transaction state is now tracked using indexes into an array rather
than linked lists, and a few comments refer to the "old way" of
doing things. The description of how transactions are used was
changed to refer to "operations" rather than "commands", to
(hopefully) remove a possible ambiguity.
IPA register offsets and fields are now handled differently as well,
and the register documentation is updated to better describe the
code.
A few minor updates to comments were made (e.g., adding a missing
word, fixing a typo or punctuation, etc.).
Finally, the local macro atomic_dec_not_zero() is no longer used, so
it is deleted.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220930224527.3503404-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the ENDP_INIT_DEAGGR, ENDP_INIT_RSRC_GRP,
ENDP_INIT_SEQ, ENDP_STATUS, and ENDP_FILTER_ROUTER_HSH_CFG, and
IPA_IRQ_UC IPA registers for all supported IPA versions.
Create enumerated types to identify fields for these IPA registers.
Use IPA_REG_FIELDS() and IPA_REG_STRIDE_FIELDS() to specify the
field mask values defined for these registers, for each supported
version of IPA.
Use ipa_reg_encode() and ipa_reg_bit() to build up the values to be
written to these registers, remove an inline function and all the
*_FMASK symbols that are now no longer used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the ENDP_INIT_MODE, ENDP_INIT_AGGR,
ENDP_INIT_HOL_BLOCK_EN, and ENDP_INIT_HOL_BLOCK_TIMER IPA
registers for all supported IPA versions.
Create enumerated types to identify fields for these IPA registers.
Use IPA_REG_STRIDE_FIELDS() to specify the field mask values defined
for these registers, for each supported version of IPA.
Change aggr_time_limit_encode() and hol_block_timer_encode() so they
take an ipa_reg pointer, and use those register's fields to compute
their encoded results. Have aggr_time_limit_encode() take an IPA
pointer rather than version, to match hol_block_timer_encode().
Use ipa_reg_encode(), ipa_reg_bit(), and ipa_reg_field_max() to
manipulate values to be written to these registers, remove the
definitions of the various inline functions and *_FMASK symbols that
are now no longer used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the ENDP_INIT_CTRL, ENDP_INIT_CFG, ENDP_INIT_NAT,
ENDP_INIT_HDR, and ENDP_INIT_HDR_EXT IPA registers for all supported
IPA versions.
Create enumerated types to identify fields for these IPA registers.
Use IPA_REG_STRIDE_FIELDS() to specify the field mask values defined
for these registers, for each supported version of IPA.
Move ipa_header_size_encoded() and ipa_metadata_offset_encoded() out
of "ipa_reg.h" and into "ipa_endpoint.c". Change them so they take
an additional ipa_reg structure argument, and use ipa_reg_encode()
to encode the parts of the header size and offset prior to writing
to the register. Change their names to be verbs rather than nouns.
Use ipa_reg_encode(), ipa_reg_bit, and ipa_reg_field_max() to
manipulate values to be written to these registers, remove the
definition of the no-longer-used *_FMASK symbols.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the {SRC,DST}_RSRC_GRP_{01,23,45,67}_RSRC_TYPE
IPA registers for all supported IPA versions.
Create enumerated types to identify fields for these IPA registers.
Use IPA_REG_STRIDE_FIELDS() to specify the field mask values defined
for these registers, for each supported version of IPA.
Use ipa_reg_encode() to build up the values to be written to these
registers.
Remove the definition of the no-longer-used *_FMASK symbols.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the FLAVOR_0, IDLE_INDICATION_CFG,
QTIME_TIMESTAMP_CFG, TIMERS_XO_CLK_DIV_CFG and TIMERS_PULSE_GRAN_CFG
IPA registers for all supported IPA versions.
Create enumerated types to identify fields for these IPA registers.
Use IPA_REG_FIELDS() to specify the field mask values defined for
these registers, for each supported version of IPA.
Use ipa_reg_bit() and ipa_reg_encode() to build up the values to be
written to these registers. Use ipa_reg_decode() to extract field
values from the FLAVOR_0 register.
Remove the definition of the no-longer-used *_FMASK symbols.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the LOCAL_PKT_PROC_CNTXT, COUNTER_CFG, and
IPA_TX_CFG IPA registers for all supported IPA versions.
Create enumerated types to identify fields for these IPA registers.
Use IPA_REG_FIELDS() to specify the field mask values defined for
these registers, for each supported version of IPA.
Use ipa_reg_bit() and ipa_reg_encode() to build up the values to be
written to these registers. Remove the definition of the *_FMASK
symbols as well as proc_cntxt_base_addr_encoded(), because they are
no longer needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the fields for the SHARED_MEM_SIZE, QSB_MAX_WRITES,
QSB_MAX_READS, FILT_ROUT_HASH_EN, and FILT_ROUT_HASH_FLUSH IPA
registers for all supported IPA versions.
Create enumerated types to identify fields for these registers. Use
IPA_REG_FIELDS() to specify the field mask values defined for these
registers, for each supported version of IPA.
Use ipa_reg_bit() and ipa_reg_encode() to build up the values to be
written to these registers rather than using the *_FMASK
preprocessor symbols.
Remove the definition of the now unused *_FMASK symbols.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create the ipa_reg_clkon_cfg_field_id enumerated type, which
identifies the fields for the CLKON_CFG IPA register. Add "CLKON_"
to a few short names to try to avoid name conflicts. Create the
ipa_reg_route_field_id enumerated type, which identifies the fields
for the ROUTE IPA register.
Use IPA_REG_FIELDS() to specify the field mask values defined for
these registers, for each supported version of IPA.
Use ipa_reg_bit() and ipa_reg_encode() to build up the values to be
written to these registers rather than using the *_FMASK
preprocessor symbols.
Remove the definition of the now unused *_FMASK symbols.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create the ipa_reg_comp_cfg_field_id enumerated type, which
identifies the fields for the COMP_CFG IPA register.
Use IPA_REG_FIELDS() to specify the field mask values defined for
this register, for each supported version of IPA.
Use ipa_reg_bit() to build up the value to be written to this
register rather than using the *_FMASK preprocessor symbols.
Remove the definition of the *_FMASK symbols, along with the inline
functions that were used to encode certain fields whose position
and/or width within the register was dependent on IPA version.
Take this opportunity to represent all one-bit fields using BIT(x)
rather than GENMASK(x, x).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add register field descriptors to the ipa_reg structure. A field in
a register is defined by a field mask, which is a 32-bit mask having
a single contiguous range of bits set.
For each register that has at least one field defined, an enumerated
type will identify the register's fields. The ipa_reg structure for
that register will include an array fmask[] of field masks, indexed
by that enumerated type. Each field mask defines the position and
bit width of a field. An additional "fcount" records how many
fields (masks) are defined for a given register.
Introduce two macros to be used to define registers that have at
least one field.
Introduce a few new functions related to field masks. The first
simply returns a field mask, given an IPA register pointer and field
mask ID. A variant of that is meant to be used for the special case
of single-bit field masks.
Next, ipa_reg_encode(), identifies a field with an IPA register
pointer and a field ID, and takes a value to represent in that
field. The result encodes the value in the appropriate place to be
stored in the register. This is roughly modeled after the bitmask
operations (like u32_encode_bits()).
Another function (ipa_reg_decode()) similarly identifies a register
field, but the value supplied to it represents a full register
value. The value encoded in the field is extracted from the value
and returned. This is also roughly modeled after bitmask operations
(such as u32_get_bits()).
Finally, ipa_reg_field_max() returns the maximum value representable
by a field.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function that returns a register descriptor given its
ID. Change ipa_reg_offset() and ipa_reg_n_offset() so they take a
register descriptor argument rather than an IPA pointer and register
ID. Have them accept null pointers (and return an invalid 0 offset),
to avoid the need for excessive error checking. (A warning is issued
whenever ipa_reg() returns 0).
Call ipa_reg() or ipa_reg_n() to look up information about the
register before calls to ipa_reg_offset() and ipa_reg_n_offset().
Delay looking up offsets until they're needed to read or write
registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the array of register descriptors assigned at initialization
time to determine the offset (and where used, stride) for IPA
registers. Issue a warning if an offset is requested for a register
that's not valid for the current system.
Remove all IPE_REG_*_OFFSET macros, as well as inline static
functions that returned register offsets.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new subdirectory "reg", which contains a register
definition file for each supported version of IPA. Each register
definition contains the register's offset, and for parameterized
registers, the stride (distance between consecutive instances of the
register). Finally, it includes an all-caps printable register name.
In these files, each IPA version defines an array of IPA register
definition pointers, with unsupported registers defined with a null
pointer. The array is indexed by the ipa_reg_id enumerated type.
At initialization time, the appropriate register definition array to
use is selected based on the IPA version, and assigned to a new
"regs" field in the IPA structure.
Extend ipa_reg_valid() so it fails if a valid register is not
defined.
This patch simply puts this infrastructure in place; the next will
use it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose two inline functions that return the offset for a register
whose ID is provided; one of them takes an additional argument
that's used for registers that are parameterized. These both use
a common helper function __ipa_reg_offset(), which just uses the
offset symbols already defined.
Replace all references to the offset macros defined for IPA
registers with calls to ipa_reg_offset() or ipa_reg_n_offset().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new ipa_reg_id enumerated type, which identifies each IPA
register with a symbolic identifier. Use short names, but in some
cases (such as "BCR") add "IPA_" to the name to help avoid name
conflicts.
Create two functions that indicate register validity. The first
concisely indicates whether a register is valid for a given version
of IPA, and if so, whether it is defined. The second indicates
whether a register is valid for TX or RX endpoints.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function that encapsulates setting the BCR, TX_CFG, and
CLKON_CFG register values during hardware configuration.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function that encapsulates setting the counter
configuration register value for versions prior to IPA v4.5.
Create another small function to represent configuring hardware
timing regardless of version.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function that encapsulates setting the register flag
that disables filter and routing table hashing for IPA v4.2.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update a few enumerated type definitions in "ipa_reg.h" so that the
values assigned to each member align on the same column. Where a
"TX" or "RX" (or both) comment is present, move that annotation into
a separate comment between the member name and its value.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The backward compatibility register (BCR) has a set of bit flags
that indicate ways in which the IPA hardware should operate in a
backward compatible way. The register is not supported starting
with IPA v4.5, and where it is supported, defined bits all have the
same numeric value.
Redefine these flags using an enumerated type, with each member's
value representing the bit position that encodes it in the BCR.
This replaces all of the single-bit field masks previously defined.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both aggr_time_limit_encode() and hol_block_timer_encode() figure
out how to encode a millisecond time value so it can be programmed
into a register. Rearranging them a bit can make their similarity
more obvious, with both taking essentially the same form.
To do this:
- Return 0 immediately in aggr_time_limit_encode() if the
microseconds value supplied is zero.
- Reverse the test at top of aggr_time_limit_encode(), so we
compute and return the Qtime value in the "true" block,
and compute the result the old way otherwise.
- Open-code (and eliminate) hol_block_timer_qtime_encode() at the
top of hol_block_timer_encode() in the case we use Qtimer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function ipa_qtime_val() which returns a value that
indicates what should be encoded for a register with a time field
expressed using Qtime. Use it to factor out common code in
aggr_time_limit_encoded() and hol_block_timer_qtime_val().
Rename aggr_time_limit_encoded() and hol_block_timer_qtime_val() so
their names are both verbs ending in "encode". Rename the "limit"
argument to the former to be "milliseconds" for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In two spots we use u32_replace_bits() to replace a set of bits in a
register while preserving the rest. Both of those cases just zero
the bits being replaced, and this can be done more simply without
using that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/freescale/fec.h
7b15515fc1ca ("Revert "fec: Restart PPS after link state change"")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/
drivers/pinctrl/pinctrl-ocelot.c
c297561bc98a ("pinctrl: ocelot: Fix interrupt controller")
181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/
tools/testing/selftests/drivers/net/bonding/Makefile
bbb774d921e2 ("net: Add tests for bonding and team address list management")
152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/
drivers/net/can/usb/gs_usb.c
5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPA can route packets between IPA-connected entities. The AP and
modem are currently the only such entities supported, and no routing
is required to transfer packets between them.
The number of entries in each routing table is fixed, and defined at
initialization time. Some of these entries are designated for use
by the modem, and the rest are available for the AP to use. The AP
sends a QMI message to the modem which describes (among other
things) information about routing table memory available for the
modem to use.
Currently the QMI initialization packet gives wrong information in
its description of routing tables. What *should* be supplied is the
maximum index that the modem can use for the routing table memory
located at a given location. The current code instead supplies the
total *number* of routing table entries. Furthermore, the modem is
granted the entire table, not just the subset it's supposed to use.
This patch fixes this. First, the ipa_mem_bounds structure is
generalized so its "end" field can be interpreted either as a final
byte offset, or a final array index. Second, the IPv4 and IPv6
(non-hashed and hashed) table information fields in the QMI
ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds
rather than ipa_mem_array structures. Third, we set the "end" value
for each routing table to be the last index, rather than setting the
"count" to be the number of indices. Finally, instead of allowing
the modem to use all of a routing table's memory, it is limited to
just the portion meant to be used by the modem. In all versions of
IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries.
Update a few comments for clarity.
Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All field mask symbols are defined with a "_FMASK" suffix, but
EOT_COAL_GRANULARITY and DRBIP_ACL_ENABLE are defined without one.
Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with IPA v4.5, replication is done differently from before,
and as a result the "replication" portion of the how the sequencer
is specified must be zero.
Add a check for the configuration data failing that requirement, and
only update the sesquencer type value when it's supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ipa_endpoint_init_hdr(), as well as ipa_endpoint_init_hdr_ext(),
a top-level automatic variable named "offset" is used to represent
the offset of a register.
However, deeper within each of those functions is *another*
definition of a local variable with the same name, representing
something else. Scoping rules ensure the result is what was
intended, but this variable name reuse is bad practice and makes
the code confusing.
Fix this by naming the inner variable "off". Use "off" instead of
"checksum_offset" in ipa_endpoint_init_cfg() for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the definition of ipa_version_valid(), making it a static
inline function defined together with the enumerated type in
"ipa_version.h". Define a new count value in the type.
Rename the function to be ipa_version_supported(), and have it
return true only if the IPA version supplied is explicitly supported
by the driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the definition of the gsi_ee_id enumerated type out of "gsi.h"
and into "ipa_version.h". That latter header file isolates the
definition of the ipa_version enumerated type, allowing it to be
included in both IPA and GSI code. We have the same requirement for
gsi_ee_id, and moving it here makes it easier to get only that
definition without everything else defined in "gsi.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each GSI execution environment (EE) is able to access many of the
GSI registers associated with the other EEs. A block of GSI
registers is contained within a region of memory, and an EE's
register offset can be determined by adding the register's base
offset to the product of the EE ID and a fixed constant.
Despite this possibility, the AP IPA code *never* accesses any GSI
registers other than its own. So there's no need to define the
macros that compute register offsets for other EEs.
Redefine the AP access macros to compute the offset the way the more
general "any EE" macro would, and get rid of the unneeded macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If it finds no completed transactions, gsi_channel_trans_complete()
calls gsi_channel_update() to check hardware. If new transactions
have completed, gsi_channel_update() records that, then calls
gsi_channel_trans_complete() to return the first of those found.
This recursion won't go any further, but can be avoided if we
have gsi_channel_update() only be responsible for updating state
after accessing hardware.
Change gsi_channel_update() so it simply checks for and handles
new completions, without returning a value. If it needs to call
that function, have gsi_channel_trans_complete() determine whether
there are new transactions available after the update.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Have gsi_channel_trans_complete() update the known state from
hardware rather than doing so in gsi_channel_poll_one().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
None of the transaction lists are actually needed any more, because
transaction IDs (which have been shown to be equivalent) are used
instead. So we can remove all of them, as well as the spinlock
that protects updates to them.
Not requiring a lock simplifies gsi_trans_free() as well; we only
need to check the reference count once to decide whether we've hit
the last reference.
This makes the links field in the gsi_trans structure unused, so get
rid of that as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only place the trans_info->alloc list is used is when
initializing it, when adding a transaction to it when allocation
finishes, and when moving a transaction from that list to the
committed list.
We can just skip putting a transaction on the allocated list, and
add it (rather than move it) to the committed list when it is
committed.
On additional caveat is that an allocated transaction that's
committed without any TREs added will be immediately freed. Because
we aren't adding allocated transactions to a list any more, the
list links need to be initialized to ensure they're valid at the
time list_del() is called for the transaction.
Then we can safely eliminate the allocated transaction list.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In gsi_channel_trans_complete(), use the completed and pending IDs
to determine whether there are any transactions in completed state.
Similarly, in gsi_channel_trans_cancel_pending(), use the pending
and committed IDs to mark pending transactions cancelled. Rearrange
the logic a bit there for a simpler result.
This removes the only user of list_last_entry_or_null(), so get rid
of that macro.
Remove the temporary warnings added by the previous commit.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The completed transaction list is used in gsi_channel_trans_complete()
to return the next transaction in completed state.
Add some temporary checks to verify the transaction indicated by the
completed ID matches the one first in this list.
Similarly, we use the pending and completed transaction lists when
cancelling pending transactions in gsi_channel_trans_cancel_pending().
Add temporary checks there to verify the transactions indicated by
IDs match those tracked by these lists.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do a little more refactoring in gsi_channel_trans_last() to simplify
it further. The resulting code should behave exactly as before.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using a little logic we can simplify gsi_channel_trans_last().
The first condition in that function looks like this:
if (trans_info->allocated_id != trans_info->free_id)
And if that's false, we proceed to the next one:
if (trans_info->committed_id != trans_info->allocated_id)
Failure of the first test implies:
trans_info->allocated_id == trans_info->free_id
And therefore, the second one can be rewritten this way:
if (trans_info->committed_id != trans_info->free_id)
Substituting free_id for allocated_id and committed_id can also be
done in the code blocks executed when these conditions yield true.
The net result is that all three blocks for TX endpoints can be
consolidated into just one.
The two blocks of code at the end of that function (used for both TX
and RX channels) can be similarly consolidated into a single block.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Always use transaction IDs when finding the "last" transaction to
await when quiescing a channel. This basically extends what was
done in the previous patch to all other transaction state IDs.
As a result we are no longer updating any transaction lists inside
gsi_channel_trans_last(), so there's no need to take the spinlock.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
