summaryrefslogtreecommitdiff
path: root/drivers/net/igb
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11intel: Move the Intel wired LAN driversJeff Kirsher17-18869/+0
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04igb: fix WOL on second port of i350 deviceCarolyn Wyborny1-1/+1
This patch fixes a problem where WOL would fail on second port of i350 device. Reported-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Reported-by: Stefan Assmann<sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-04intel drivers: repair missing flush operationsJesse Brandeburg3-0/+8
after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-24igb: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/net/igb/igb_main.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22igb: Fix for DH89xxCC near end loopback testRobert Healy2-0/+43
On this chipset it is required to configure the MPHY block for loopback tests. If MPHY is not configured then all loopback tests will report failures. Signed-off-by: Robert Healy <robert.healy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-22igb: do vlan cleanupJiri Pirko2-47/+47
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igb_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12igb: Add support of SerDes Forced mode for certain hardwareCarolyn Wyborny3-4/+22
This patch changes the serdes link code to support a forced mode for some hardware, based on bit set in EEPROM. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-12igb: Update copyright on all igb driver files.Carolyn Wyborny17-17/+17
This patch updates the copyright on the igb driver files to 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-12igb: Fix lack of flush after register write and before delayCarolyn Wyborny1-0/+1
Register writes followed by a delay are required to have a flush before the delay in order to commit the values to the register. Without the flush, the code following the delay may not function correctly. Reported-by: Tong Ho <tong.ho@ericsson.com> Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-05net: igb: Use is_multicast_ether_addr helperTobias Klauser1-1/+2
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-28igb: remove unnecessary reads of PCI_CAP_ID_EXPJon Mason1-2/+2
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21igb: convert to ndo_fix_featuresMichał Mirosław2-74/+26
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-21Merge branch 'master' of ↵David S. Miller1-0/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-rxon.c drivers/net/wireless/rtlwifi/pci.c net/netfilter/ipvs/ip_vs_core.c
2011-06-10igb: Change version to remove number after -k in kernel versions.Carolyn Wyborny1-2/+1
This patch changes the way versioning is done for igb in the kernel by removing the number after the "k." It has been determined that just the "k" is sufficient to identify a kernel version and the following number was used in an inconsistent manner. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-08igb: fix i350 SR-IOV failtureWilliams, Mitch A1-0/+3
When SR-IOV is enabled, i350 devices fail to pass traffic. This is due to the driver attempting to enable RSS on the PF device, which is not supported by the i350. When max_vfs is specified on an i350 adapter, set the number of RSS queues to 1. This issue affects 2.6.39 as well. CC: stable@kernel.org Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker1-0/+1
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-07igb: convert to ethtool set_phys_idJeff Kirsher1-18/+19
Based on patch from Stephen Hemminger. Convert igb driver to use new set_phys_id ethtool interface. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-04igb: Add check for invalid size to igb_get_invariants_82575()Carolyn Wyborny1-0/+8
Recent commits have changed how EEPROM size is checked and if the size word is misconfigured, the driver will fail to load. This patch adds a check for invalid size word in the EEPROM and uses default size instead for 82576 parts. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-30net/igb/e1000/e1000e: more robust ethtool duplex/speed configurationDavid Decotigny3-10/+17
This makes sure that one cannot request a 99Mbps full-duplex and get a 100Mbps half-duplex configuration in return due to the way the speed/duplex parameters are handled internally. Tested: e1000 works Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny1-4/+4
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny1-1/+2
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14igb: introduce igb_thermal_sensor_event for sensor checkingStefan Assmann1-33/+34
The code for thermal sensor checking should be wrapped into a function. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14igb: fix typo in igb_validate_nvm_checksum_82580Stefan Assmann1-1/+2
Comment spelling fix. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-31Fix common misspellingsLucas De Marchi3-10/+10
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-15igb: Add messaging for thermal sensor events on i350 devicesCarolyn Wyborny3-1/+44
This feature adds messaging to the link status change to notify the user if the device returned from a downshift or power off event due to the Thermal Sensor feature in i350 parts. Feature is only available on internal copper ports. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-15igb: fix hw timestampingAnders Berggren1-1/+4
Hardware timestamping for Intel 82580 didn't work in either 2.6.36 or 2.6.37. Comparing it to Intel's igb-2.4.12 I found that the timecounter_init clock/counter initialization was done too early. Signed-off-by: Anders Berggren <andfers@halon.se> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Bump version to 3.0.6Carolyn Wyborny1-1/+6
This patch updates igb version to 3.0.6. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Add DMA Coalescing feature to driverCarolyn Wyborny5-1/+106
This patch add DMA Coalescing which is a power-saving feature that coalesces DMA writes in order to stay in a low-power state as much as possible. Feature is disabled by default. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Update NVM functions to work with i350 devicesCarolyn Wyborny7-8/+306
This patch adds functions and functions pointers to accommodate differences between NVM interfaces and options for i350 devices, 82580 devices and the rest. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Add Energy Efficient Ethernet (EEE) for i350 devices.Carolyn Wyborny6-2/+65
This patch adds the EEE feature for i350 devices, enabled by default. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08igb: Add stats output for OS2BMC feature on i350 devicesCarolyn Wyborny5-1/+29
This patch adds statistics output for OS2BMC feature which is configured by eeprom on capable devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: Fix strncpy calls to be safe per source code review toolsCarolyn Wyborny1-4/+7
This fix changes the remaining calls to strncpy that have not yet been changed to use the "sizeof(buf) - 1" syntax rather than just a number for buffer size. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: Fix reg pattern test in ethtool for i350 devicesCarolyn Wyborny1-1/+1
This fixes the reg_pattern_test so that the test does not fail on i350 parts. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: warn if max_vfs limit is exceededStefan Assmann1-1/+6
Currently there's no warning printed when max_vfs > 7 is specified with igb and the maximum of 7 is silently enforced. This patch prints a warning and informs the user of the actions taken. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: update version stringCarolyn Wyborny1-1/+1
This will synchronize the version with the out of tree driver which shares its functionality. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: Update Intel copyright notice for driver source.Carolyn Wyborny1-1/+1
This fix updates copyright information to include current year 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: add support for VF Transmit rate limit using iproute2Lior Levy4-2/+99
Implemented igb_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated igb_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up. The rate limit value can be ranged between 0 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported only by 82576 device. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11igb: Enable PF side of SR-IOV support for i350 devicesCarolyn Wyborny3-24/+33
This patch adds full support for SR-IOV by enabling the PF side. VF side has already been committed. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-01-24igb: Add support for i340 Quad Port Fiber AdapterCarolyn Wyborny3-0/+3
This patch enables support for Intel i340 Quad Port Fiber Adapter. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-25igb: Add Anti-spoofing feature supportGreg Rose5-0/+87
Add support for the anti-spoofing feature in the HW. Packets from VF devices with spoofed MAC addresses or VLAN tags will be blocked and an event generated. When the watchdog task runs it will call a function to check if any spoof events occurred. If an event was detected then a warning message is dumped to the system log. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-25igb: Some fine tuningGasparakis, Joseph3-3/+9
This patch does the following: 1. Changes the existing supported device id's so now DH89xxCC is not supported when EEPROM is not read. 2. Adds two more device ids for DH89xxCC in backplane mode and SFP. 3. Driver now initializes previously possibly uninitialized value in igb_reset_mdicnfg_82580(). Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-25igb: Warn on attempt to override administratively set MAC/VLANGreg Rose1-3/+14
Print a warning message to the system log when the VF attempts to override administratively set MAC/VLAN configuration. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-25igb: Fix overwrite of the VF's flagsGreg Rose1-4/+4
The vf flags were being overwritten causing the flag that indicates that the PF has set the VF MAC address to get cleared. This would allow the VF to override the MAC address assigned by the Host VMM using the ip link set command. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-12igb[v],ixgbe: don't use flush_scheduled_work()Tejun Heo1-3/+6
All three drivers use flush_scheduled_work() similarly during driver detach. Replace it with explicit cancels. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org
2010-12-11igb: Add new function to read part number from EEPROM in string formatCarolyn Wyborny4-11/+102
New adapters will have part numbers stored in string format rather than simple hex format. This function will read part number formats in either hex or string. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-11Intel Wired LAN drivers: Use static constJeff Kirsher1-5/+6
Based on work by Joe Perches <joe@perches.com> Using static const to decrease data and overall object size. CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
2010-11-28drivers/net: use vzalloc()Eric Dumazet1-4/+2
Use vzalloc() and vzalloc_node() in net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28igb: Fix unused variable warning.Jesse Gross1-1/+0
Commit eab6d18d "vlan: Don't check for vlan group before vlan_tx_tag_present" removed the need for the adapter variable in igb_xmit_frame_ring_adv(). This removes the variable as well to avoid the compiler warning. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross1-1/+1
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 05:26:07 +0300