summaryrefslogtreecommitdiff
path: root/drivers/net/igb/e1000_defines.h
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11intel: Move the Intel wired LAN driversJeff Kirsher1-834/+0
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-22igb: Fix for DH89xxCC near end loopback testRobert Healy1-0/+10
On this chipset it is required to configure the MPHY block for loopback tests. If MPHY is not configured then all loopback tests will report failures. Signed-off-by: Robert Healy <robert.healy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-12igb: Add support of SerDes Forced mode for certain hardwareCarolyn Wyborny1-2/+3
This patch changes the serdes link code to support a forced mode for some hardware, based on bit set in EEPROM. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-12igb: Update copyright on all igb driver files.Carolyn Wyborny1-1/+1
This patch updates the copyright on the igb driver files to 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-15igb: Add messaging for thermal sensor events on i350 devicesCarolyn Wyborny1-0/+5
This feature adds messaging to the link status change to notify the user if the device returned from a downshift or power off event due to the Thermal Sensor feature in i350 parts. Feature is only available on internal copper ports. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Add DMA Coalescing feature to driverCarolyn Wyborny1-1/+28
This patch add DMA Coalescing which is a power-saving feature that coalesces DMA writes in order to stay in a low-power state as much as possible. Feature is disabled by default. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Update NVM functions to work with i350 devicesCarolyn Wyborny1-0/+3
This patch adds functions and functions pointers to accommodate differences between NVM interfaces and options for i350 devices, 82580 devices and the rest. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-12igb: Add Energy Efficient Ethernet (EEE) for i350 devices.Carolyn Wyborny1-0/+7
This patch adds the EEE feature for i350 devices, enabled by default. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08igb: Add stats output for OS2BMC feature on i350 devicesCarolyn Wyborny1-0/+1
This patch adds statistics output for OS2BMC feature which is configured by eeprom on capable devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: add support for VF Transmit rate limit using iproute2Lior Levy1-0/+7
Implemented igb_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated igb_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up. The rate limit value can be ranged between 0 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported only by 82576 device. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-11igb: Add new function to read part number from EEPROM in string formatCarolyn Wyborny1-0/+7
New adapters will have part numbers stored in string format rather than simple hex format. This function will read part number formats in either hex or string. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-09-23igb: Add support for DH89xxCCJoseph Gasparakis1-0/+31
This patch adds support for the Intel(r) DH89xxCC series. The new device will be using Intel(r) i347-AT4 and Marvell(r) M88E1322 and M88E1112 PHYs. Support for these devices has also been added here. Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27igb: restore EEPROM values of MDICNFG on reset with 82580Nick Nunley1-0/+4
On a reset the MDICNFG.Destination and MDICNFG.COM_MDIO register fields are not restored to the EEPROM default. This patch modifies the reset code to read the EEPROM and restore the default values. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27igb: add support for SGMII-based MDIO PHYsNick Nunley1-0/+10
This patch adds support for external MDIO PHYs, in addition to the standard SFP support for SGMII PHYs over the I2C interface. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-02igb: fix PHY config access on 82580Nick Nunley1-0/+2
82580 NICs can have up to 4 functions. This fixes phy accesses to use the correct locks for functions 2 and 3. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: add support for reporting 5GT/s during probe on PCIe Gen2Alexander Duyck1-4/+0
This change corrects the fact that we were not reporting Gen2 link speeds when we were in fact connected at Gen2 rates. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23igb: add support for Intel I350 Gigabit Network ConnectionAlexander Duyck1-0/+1
This patch adds support for the the I350 Gigabit network connection which is the follow-on part to the 82580. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: James Hearn <james.r.hearn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: remove adaptive IFS from driverNick Nunley1-6/+0
Adaptive IFS support has been included in the igb driver since its initial release, but it is not a feature on any igb NICs. This patch removes it from the driver. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: Power down link when interface is downNick Nunley1-0/+1
This changes the behavior of the driver to power down the link when the associated interface is down, unless management is enabled. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20igb: Add full support for 82580 devicesAlexander Duyck1-0/+7
This patch makes use of the 82580 PHY and MAC support added and adds a set of supported device IDs for said hardware. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20igb: add support for 82580 MACAlexander Duyck1-2/+8
This patch adds support for the 82580 MAC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: cleanup some of the code related to hw timestampingAlexander Duyck1-0/+33
The code for the hw timestamping is a bit bulky and making some of the functions difficult to read. In order to clean things up a bit I am moving the timestamping operations into seperate functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15igb: reset sgmii phy at start of initAlexander Duyck1-1/+1
Our SGMII phy code was incomplete in that it was not actually placing the phy in SGMII mode and as a result the PHY was not able to establish a link when connected to a non serdes link partner. This patch updates the code to combine the SGMII/serdes PCS init and to add the necessary reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26igb: add completion timeout workaround for 82575/82576Alexander Duyck1-0/+8
The 82575 and 82576 hardware can both experience data corruption issues if a pci-e completion arrives after the timeout value. In order to avoid this we need to increase the timeout value while pci-e master is disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28igb: Enable SCTP checksum offloadingJesse Brandeburg1-0/+1
Originally from: Vlad Yasevich <vladislav.yasevich@hp.com> This patch, both the driver portion and the sctp code was modified by Jesse Brandeburg and is Copyright(c) 2009 Intel Corporation. Thanks go to Vlad for starting this work. Intel 82576 chipset supports SCTP checksum offloading. This patch enables this functionality in the driver. A new NETIF feature is introduced for SCTP checksum offload. If the driver supports CRC32c checksum, it can set this feature flag. The hardware can offload both transmit and receive. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28igb: make rxcsum configuration seperate from multiqueueAlexander Duyck1-1/+1
The igb driver was being incorrectly setup to only allow disabling receive checksum if multiqueue was disabled. This change corrects that so that RXCSUM is configured regardless of queue configuration. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14igb: support wol on second portAlexander Duyck1-0/+1
We need to support wol on the second port for situations such as when the lan ports are on the motherboard itself. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20igb: Add support for enabling VFs to PF driver.Alexander Duyck1-0/+9
This patch adds the support to handle requests from the VF to perform operations such as completing resets, setting/reading mac address, adding vlans, adding multicast addresses, setting rlpml, and general communications between the PF and all VFs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20igb: add pf side of VMDq supportAlexander Duyck1-0/+2
Add the pf portion of vmdq support. This provides enough support so that VMDq is enabled, and the pf is functional without enabling vfs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16igb: remove unused definesAlexander Duyck1-113/+0
This patch removes all of the unused defines from the .h files contained in igb. For some defines there was a use and so I plugged them into the correct locations. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16igb: use timecompare to implement hardware time stampingPatrick Ohly1-0/+1
Both TX and RX hardware time stamping are implemented. Due to hardware limitations it is not possible to verify reliably which packet was time stamped when multiple were pending for sending; this could be solved by only allowing one packet marked for hardware time stamping into the queue (not implemented yet). RX time stamping relies on the flag in the packet descriptor which marks packets that were time stamped. In "all packet" mode this flag is not set. TODO: also support that mode (even though it'll suffer from race conditions). Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: update version number and copyright datesAlexander Duyck1-1/+1
Update the version number to 1.3.16 and update copyright dates for 2009. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: add counter for dma out of sync errorsAlexander Duyck1-1/+5
Add a counter for dma out of sync errors reported via interrupt. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: read address from RAH/RAL instead of from EEPROMAlexander Duyck1-0/+2
Instead of pulling the mac address from EEPROM it is easier to pull it from the RAL/RAH registers and then just copy it into the address structures. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26igb: defeature tx head writebackAlexander Duyck1-0/+1
This patch removes tx head writeback as it was found to not provide a significant improvement in tx performance and on some systems has been seen to cause a performance degredation due to partial cache line writes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25igb: remove unneeded bit refrence when enabling jumbo framesAlexander Duyck1-6/+0
There is a reference to a Buffer Size extention bit that is unneded by 82575/82576 hardware. Since it is not needed it should be removed from the code. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07igb: fixes 82576 serdes init to correctly support manual flow control changesAlexander Duyck1-0/+1
This patch changes the PCS configuration for serdes so that the flow control options change be set via the ethtool -A option. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11igb: add 82576 MAC supportAlexander Duyck1-0/+10
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: fix init on 82575 with MNG enabledAlexander Duyck1-0/+1
This patch resolves an issue seen on 82575 adapters with managability pass-thru enabled, which could cause the system to panic. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04igb: eliminate hw from the hw_dbg macro argumentsAuke Kok1-20/+7
Various cosmetic cleanups. Comment fixes. Eliminate the hw part out of the hw_dbg macro since it's always used. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-29igb: PCI-Express 82575 Gigabit Ethernet driverAuke Kok1-0/+772
We are pleased to announce a new Gigabit Ethernet product and its driver to the linux community. This product is the Intel(R) 82575 Gigabit Ethernet adapter family. Physical adapters will be available to the public soon. These adapters come in 2- and 4-port versions (copper PHY) currently. Other variants will be available later. The 82575 chipset supports significantly different features that warrant a new driver. The descriptor format is (just like the ixgbe driver) different. The device can use multiple MSI-X vectors and multiple queues for both send and receive. This allows us to optimize some of the driver code specifically as well compared to the e1000-supported devices. This version of the igb driver no lnger uses fake netdevices and incorporates napi_struct members for each ring to do the multi- queue polling. multi-queue is enabled by default and the driver supports NAPI mode only. All the namespace collisions should be gone in this version too. The register macro's have been condensed to improve readability. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 12:58:42 +0300