| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pass the stmmac_priv structure into the pcs_set_ane() MAC method rather
than having callers dereferencing this structure for the IO address.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sa8775p-ride-r3
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1uRqbQ-004djP-1l@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to not exceed the reserved memory size for hwfd buffers,
compute the number of hwfd buffers/descriptors according to the
reserved memory size and the size of each hwfd buffer (2KB).
Fixes: 3a1ce9e3d01b ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The message "Error getting PHY irq. Use polling instead"
is emitted when the mlxbf_gige driver is loaded by the
kernel before the associated gpio-mlxbf driver, and thus
the call to get the PHY IRQ fails since it is not yet
available. The driver probe() must return -EPROBE_DEFER
if acpi_dev_gpio_irq_get_by() returns the same.
Fixes: 6c2a6ddca763 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_ppe_foe_get_entry routine can return NULL, so check the returned
pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update()
Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lan743x_ptp_io_event_clock_get()
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace.
Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.
MANA VF setup/teardown by netvsc follows this call chain:
netvsc_vf_setup()
dev_change_flags()
...
__dev_open() OR __dev_close()
dev_change_flags() holds the netdev mutex via netdev_lock_ops.
Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.
Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.
Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.
Fixes: d4c22ec680c8 ("net: hold netdev instance lock during ndo_open/ndo_stop")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Static analysis shows that pointer "my_ets" cannot be NULL because it
points to the object "struct ieee_ets".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616045034.26000-1-a.vatoropin@crpt.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an entry named `phc_stats` to view the PHC statistics.
If PHC is enabled, the stats are printed, as below:
phc_cnt: 0
phc_exp: 0
phc_skp: 0
phc_err_dv: 0
phc_err_ts: 0
If PHC is disabled, no statistics will be displayed.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-9-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding the base directory of debugfs to the driver.
In order for the folder to be unique per driver instantiation,
the chosen name is the device name.
This commit contains the initialization and the
base folder.
The creation of the base folder may fail, but is considered
non-fatal.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-8-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the capability to set parameters through the devlink framework.
The parameter used for controlling PHC (enable/disable) details
are as follows:
- Name: enable_phc
- Type: Boolean (true - enable/false - disable)
- Mode: DEVLINK_PARAM_CMODE_DRIVERINIT
- Effect: Changes take place during driver initialization,
any changes require a devlink reload to take effect.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-7-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the basic functionality to support devlink port
for devlink model completeness purposes.
Current support is for registration/un-registration.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding basic devlink capability support of reloading the driver.
This capability is required to support driver init type
devlink params (DEVLINK_PARAM_CMODE_DRIVERINIT). Such params
require reloading of the driver (destroy/restore sequence).
The reloading is done by the devlink framework using the
hooks provided by the driver.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each PHC device kernel registration receives a unique kernel index,
which is associated with a new PHC device file located at
"/dev/ptp<index>".
This device file serves as an interface for obtaining PHC timestamps.
Examples of tools that use "/dev/ptp" include testptp [1]
and chrony [2].
A reset flow may occur in the ENA driver while PHC is active.
During a reset, the driver will unregister and then re-register the
PHC device with the kernel.
Under race conditions, particularly during heavy PHC loads,
the driver’s reset flow might complete faster than the kernel’s PHC
unregister/register process.
This can result in the PHC index being different from what it was prior
to the reset, as the PHC index is selected using kernel ID
allocation [3].
While driver rmmod/insmod are done by the user, a reset may occur
at anytime, without the user awareness, consequently, the driver
might receive a new PHC index after the reset, potentially compromising
the user experience.
To prevent this issue, the PHC flow will detect the reset during PHC
destruction and will skip the PHC unregister/register calls to preserve
the kernel PHC index.
During the reset flow, any attempt to get a PHC timestamp will fail as
expected, but the kernel PHC index will remain unchanged.
[1]: https://github.com/torvalds/linux/blob/v6.1/tools/testing/selftests/ptp/testptp.c
[2]: https://github.com/mlichvar/chrony
[3]: https://www.kernel.org/doc/html/latest/core-api/idr.html
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENA driver will be extended to support the new PHC feature using
ptp_clock interface [1]. this will provide timestamp reference for user
space to allow measuring time offset between the PHC and the system
clock in order to achieve nanosecond accuracy.
[1] - https://www.kernel.org/doc/html/latest/driver-api/ptp.html
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 325eb217e41fa14f307c7cc702bd18d0bb38fe84.
udp_tunnel infra doesn't need RTNL, should be safe to get back
to only netdev instance lock.
Cc: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-7-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This effectively reverts 6e8b0ff1ba4c ("dpaa_eth: Add change_carrier()
for Fixed PHYs"). Usage of fixed_phy_change_carrier() requires that
fixed_phy_register() has been called before, directly or indirectly.
And that's not the case in this driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/7eb189b3-d5fd-4be6-8517-a66671a4e4e3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NIX block can receive packets from multiple links such as
MAC (RPM), LBK and CPT.
-----------------
RPM --| NIX |
-----------------
|
|
LBK
Each link supports multiple channels for example RPM link supports
16 channels. In case of link oversubsribe, NIX will assert backpressure
on receive channels.
The previous patch considered a single channel per link, resulting in
backpressure not being enabled on the remaining channels
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rely on existing IB_MTU_XXX definitions which exist in ib_verbs.h.
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/382c91ee506e7f1f3c1801957df6b28963484b7d.1750147222.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-17 (ice, e1000e)
For ice:
Krishna Kumar modifies aRFS match criteria to correctly identify
matching filters.
Grzegorz fixes a memory leak in eswitch legacy mode.
For e1000e:
Vitaly sets clock frequency on some Nahum systems which may misreport
their value.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13
ice: fix eswitch code memory leak in reset scenario
net: ice: Perform accurate aRFS flow match
====================
Link: https://patch.msgid.link/20250617172444.1419560-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Depending on e.g. DT configuration this driver uses a fixed link.
So we shouldn't rely on the user to enable FIXED_PHY, select it in
Kconfig instead. We may end up with a non-functional driver otherwise.
Fixes: 38561ded50d0 ("net: ftgmac100: support fixed link")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/476bb33b-5584-40f0-826a-7294980f2895@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Link: https://patch.msgid.link/20250617014555.434790-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Link: https://patch.msgid.link/20250617014555.434790-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617014555.434790-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250617014555.434790-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250617014555.434790-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper function to print new/current TSPLL config. This helps
avoid unnecessary casts from u8 to enums.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Instead of multiple comments, use designated initializers for TSPLL
consts.
Adjust ice_tspll_params_e82x fields sizes.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove ice_tspll_params_e825 definitions as according to EDS (Electrical
Design Specification) doc, E825 devices support only 156.25 MHz TSPLL
frequency for both TCXO and TIME_REF clock source.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The E825-C hardware has a slightly different register layout for register
19 of the Clock Generation Unit and TSPLL. The fbdiv_intgr value can be 10
bits wide.
Additionally, most of the fields that were in register 24 are made
available in register 23 instead. The programming logic already has a
corrected definition for register 23, but it incorrectly still used the
8-bit definition of fbdiv_intgr. This results in truncating some of the
values of fbdiv_intgr, including the value used for the 156.25MHz signal.
The driver only used register 24 to obtain the enable status, which we
should read from register 23. This results in an incorrect output for the
log messages, but does not change any functionality besides
disabled-by-default dynamic debug messages.
Fix the register definitions, and adjust the code to properly reflect the
enable/disable status in the log messages.
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Rename TSPLL and CGU functions, definitions etc. to match the file name
and have consistent naming scheme.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Collect TSPLL related functions and definitions and move them to
a separate file to have all TSPLL functionality in one place.
Move CGU related functions and definitions to ice_common.*
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libeth: add libeth_xdp helper lib
Alexander Lobakin says:
Time to add XDP helpers infra to libeth to greatly simplify adding
XDP to idpf and iavf, as well as improve and extend XDP in ice and
i40e. Any vendor is free to reuse helpers. If this happens, I'm fine
with moving the folder of out intel/.
The helpers greatly simplify building xdp_buff, running a prog,
handling the verdict, implement XDP_TX, .ndo_xdp_xmit, XDP buffer
completion. Same applies to XSk (with XSk xmit instead of
.ndo_xdp_xmit, plus stuff like XSk wakeup).
They are entirely generic with no HW definitions or assumptions.
HW-specific stuff like parsing Rx desc / filling Tx desc is passed
from the driver as inline callbacks.
For now, key assumptions that optimize performance / avoid code
bloat, but might not fit every driver in driver/net/:
* netmem holding the buffers are always order-0;
* driver has separate XDP Tx queues, doesn't use stack queues for
that. For best efficiency, you may want to have nr_cpu_ids XDP
queues, but less (queue sharing) is also supported;
* XDP Tx queues are interrupt-less and use "lazy" cleaning only
when there are less than 1/4 free Tx descriptors of the queue
size;
* main target platforms are 64-bit, although 32-bit is also fully
supported, but the code might be not as optimized for them.
Library code already supports multi-buffer for all kinds of Tx and
both header split and no split for Rx and Tx. Frags can come from
devmem/io_uring etc., direct `struct page *` is used only for header
buffers for which it's always true.
Drivers are free to pass their own Rx hints and XSK xmit hints ops.
XDP_TX and ndo_xdp_xmit use onstack bulk for the frames to be sent
and send them by batches of 16 buffers. This eats ~280 bytes on the
stack, but gives good boosts and allow to greatly optimize the main
sending function leaving it without any error/exception paths.
XSk xmit fills Tx descriptors in the loop unrolled by 8. This was
proven to improve perf on ice and i40e. XDP_TX and ndo_xdp_xmit
doesn't use unrolling as I wasn't able to get any improvements in
those scenenarios from this, while +1 Kb for their sending functions
for nothing doesn't sound reasonable.
XSk wakeup, instead of traditionally used "SW interrupts" provided
by NICs, uses IPI to schedule NAPI on the CPU corresponding to the
given queue pair. It gives better control over CPU distribution and
in general performs way better than "SW interrupts", plus allows us
to not pass any HW-specific callbacks there.
The code is built the way that all callbacks passed from drivers
get inlined; in general, most of hotpath gets inlined. Everything
slow/exception lands to .c files in the libeth folder, doesn't
create copies in the drivers themselves and doesn't overloat
hotpath.
Sure, inlining means that hotpath will be compiled into every driver
that uses the lib, but the core code is written in one place, so no
copying of bugs happens. Fixed once -- works everywhere.
The last commit might look like sorta hack, but it gives really good
boosts and decreases object code size, plus there are checks that
all those wider accesses are fully safe, so I don't feel anything
bad about it.
An example of using libeth_xdp can be found either on my GitHub or
on the mailing lists here ("XDP for idpf"). Macros for building
driver XDP functions lead to that some implementations (XDP_TX,
ndo_xdp_xmit etc.) consist of really only a few lines.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
libeth: xdp, xsk: access adjacent u32s as u64 where applicable
libeth: xsk: add XSkFQ refill and XSk wakeup helpers
libeth: xsk: add XSk Rx processing support
libeth: xsk: add XSk xmit functions
libeth: xsk: add XSk XDP_TX sending helpers
libeth: xdp: add RSS hash hint and XDP features setup helpers
libeth: xdp: add templates for building driver-side callbacks
libeth: xdp: add XDP prog run and verdict result handling
libeth: xdp: add helpers for preparing/processing &libeth_xdp_buff
libeth: xdp: add XDPSQ cleanup timers
libeth: xdp: add XDPSQ locking helpers
libeth: xdp: add XDPSQE completion helpers
libeth: xdp: add .ndo_xdp_xmit() helpers
libeth: xdp: add XDP_TX buffers sending
libeth: support native XDP and register memory model
libeth: convert to netmem
libeth, libie: clean symbol exports up a little
====================
Link: https://patch.msgid.link/20250616201639.710420-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Declare netmem TX support in netdev.
As required, use the netmem aware dma unmapping APIs
for unmapping netmems in tx completion path.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-13-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5, tcp header-data split requires HW GRO to be on.
Enabling it fails when HW GRO is off.
mlx5e_fix_features now keeps HW GRO on when tcp data split is enabled.
Finally, when tcp data split is disabled, features are updated to maybe
remove the forced HW GRO.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bulk of the work is done in mlx5e_queue_mem_alloc, where we allocate
and create the new channel resources, similar to
mlx5e_safe_switch_params, but here we do it for a single channel using
existing params, sort of a clone channel.
To swap the old channel with the new one, we deactivate and close the
old channel then replace it with the new one, since the swap procedure
doesn't fail in mlx5, we do it all in one place (mlx5e_queue_start).
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250616141441.1243044-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On netdev_rx_queue_restart, a special type of page pool maybe expected.
In this patch declare support for UNREADABLE netmem iov pages in the
pool params only when header data split shampo RQ mode is enabled, also
set the queue index in the page pool params struct.
Shampo mode requirement: Without header split rx needs to peek at the data,
we can't do UNREADABLE_NETMEM.
The patch also enables the use of a separate page pool for headers when
a memory provider is installed for the queue, otherwise the same common
page pool continues to be used.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_page_frag holds the physical page itself, to naturally support
zc page pools, remove physical page reference from mlx5 and replace it
with netmem_ref, to avoid internal handling in mlx5 for net_iov backed
pages.
SHAMPO can issue packets that are not split into header and data. These
packets will be dropped if the data part resides in a net_iov as the
driver can't read into this area.
No performance degradation observed.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow allocating a separate page pool for headers when SHAMPO is on.
This will be useful for adding support to zc page pool, which has to be
different from the headers page pool.
For now, the pools are the same.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250616141441.1243044-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
