summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds12-13/+42
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2019-01-02net-next/hinic:add shutdown callbackXue Chaojing1-0/+6
If there is no shutdown callback, our board will report pcie UNF errors after restarting. This patch add shutdown callback for hinic. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENTHuazhong Tan1-3/+4
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT should call hns3_nic_net_open(), since if the number of queue or the map of TC has is changed before HHAE3_UP_CLIENT is called, it will cause problem. Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before hns3_nic_net_open() called, and set it back while hns3_nic_net_open() failed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01ibmveth: fix DMA unmap error in ibmveth_xmit_start error pathTyrel Datwyler1-1/+5
Commit 33a48ab105a7 ("ibmveth: Fix DMA unmap error") fixed an issue in the normal code path of ibmveth_xmit_start() that was originally introduced by Commit 6e8ab30ec677 ("ibmveth: Add scatter-gather support"). This original fix missed the error path where dma_unmap_page is wrongly called on the header portion in descs[0] which was mapped with dma_map_single. As a result a failure to DMA map any of the frags results in a dmesg warning when CONFIG_DMA_API_DEBUG is enabled. ------------[ cut here ]------------ DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single] WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10 ... <snip> ... DMA-API: Mapped at: ibmveth_start_xmit+0x30c/0xb60 dev_hard_start_xmit+0x100/0x450 sch_direct_xmit+0x224/0x490 __qdisc_run+0x20c/0x980 __dev_queue_xmit+0x1bc/0xf20 This fixes the API misuse by unampping descs[0] with dma_unmap_single. Fixes: 6e8ab30ec677 ("ibmveth: Add scatter-gather support") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-31r8169: fix WoL device wakeup enableHeiner Kallweit1-2/+2
In rtl8169_runtime_resume() we configure WoL but don't set the device to wakeup-enabled. This prevents PME generation once the cable is re-plugged. Fix this by moving the call to device_set_wakeup_enable() to __rtl8169_set_wol(). Fixes: 433f9d0ddcc6 ("r8169: improve saved_wolopts handling") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-29fsl/fman: Use GFP_ATOMIC in {memac,tgec}_add_hash_mac_address()Scott Wood2-2/+2
These functions are called from atomic context: [ 9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421 [ 9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip [ 9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876f324 #29 [ 9.163130] Call Trace: [ 9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable) [ 9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164 [ 9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c [ 9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198 [ 9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218 [ 9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c [ 9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4 [ 9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54 [ 9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8 [ 9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0 [ 9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80 [ 9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08 [ 9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0 [ 9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498 [ 9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c [ 9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c [ 9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318 [ 9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444 [ 9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54 [ 9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8 [ 9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0 [ 9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-29Merge tag 'usb-4.21-rc1' of ↵Linus Torvalds3-25/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.21-rc1. All of the usual bits are in here: - loads of USB gadget driver updates and additions - new device ids - phy driver updates - xhci reworks and new features - typec updates Full details are in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits) USB: serial: option: add Fibocom NL678 series cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader. usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() usb: typec: tcpm: Extend the matching rules on PPS APDO selection usb: typec: Improve Alt Mode documentation usb: musb: dsps: fix runtime pm for peripheral mode usb: musb: dsps: fix otg state machine USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays usb: renesas_usbhs: add support for RZ/G2E usb: ehci-omap: Fix deferred probe for phy handling usb: roles: Add a description for the class to Kconfig usb: renesas_usbhs: mark PM functions as __maybe_unused usb: core: Remove unnecessary memset() usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers ...
2018-12-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-5/+3
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-28net: marvell: fix a missing check of acpi_match_deviceKangjie Lu1-0/+2
When acpi_match_device fails, its return value is NULL. Directly using the return value without a check may result in a NULL-pointer dereference. The fix checks if acpi_match_device fails, and if so, returns -EINVAL. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28atl1e: checking the status of atl1e_write_phy_regKangjie Lu1-1/+3
atl1e_write_phy_reg() could fail. The fix issues an error message when it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28net: stmicro: fix a missing check of clk_prepareKangjie Lu1-1/+3
clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28net: (cpts) fix a missing check of clk_prepareKangjie Lu1-1/+3
clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28niu: fix missing checks of niu_pci_eeprom_readKangjie Lu1-2/+8
niu_pci_eeprom_read() may fail, so we should check its return value before using the read data. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28net: chelsio: Add a missing check on cudg_get_bufferAditya Pakki1-0/+4
cudbg_collect_hw_sched() could fail when the function cudg_get_buffer() returns an error. The fix adds a check to the latter function returning error on failure Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds380-9214/+28710
Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ...
2018-12-27Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds5-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The biggest RCU changes in this cycle were: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) rcutorture: Don't do busted forward-progress testing rcutorture: Use 100ms buckets for forward-progress callback histograms rcutorture: Recover from OOM during forward-progress tests rcutorture: Print forward-progress test age upon failure rcutorture: Print time since GP end upon forward-progress failure rcutorture: Print histogram of CB invocation at OOM time rcutorture: Print GP age upon forward-progress failure rcu: Print per-CPU callback counts for forward-progress failures rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings rcutorture: Dump grace-period diagnostics upon forward-progress OOM rcutorture: Prepare for asynchronous access to rcu_fwd_startat torture: Remove unnecessary "ret" variables rcutorture: Affinity forward-progress test to avoid housekeeping CPUs rcutorture: Break up too-long rcu_torture_fwd_prog() function rcutorture: Remove cbflood facility torture: Bring any extra CPUs online during kernel startup rcutorture: Add call_rcu() flooding forward-progress tests rcutorture/formal: Replace synchronize_sched() with synchronize_rcu() tools/kernel.h: Replace synchronize_sched() with synchronize_rcu() net/decnet: Replace rcu_barrier_bh() with rcu_barrier() ...
2018-12-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+10
Pull in bug fixes before respinning my net-next pull request. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-25bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hwIvan Mironov1-4/+10
This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-25net/mlx4_core: drop useless LIST_HEADJulia Lawall1-5/+0
Drop LIST_HEAD where the variable it declares has never been used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-25mlxsw: spectrum: drop useless LIST_HEADJulia Lawall1-1/+0
Drop LIST_HEAD where the variable it declares is never used. The uses were removed in 244cd96adb5f ("net_sched: remove list_head from tc_action"), but not the declaration. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-25net/mlx5e: drop useless LIST_HEADJulia Lawall1-3/+0
Drop LIST_HEAD where the variable it declares is never used. These became useless in 244cd96adb5f ("net_sched: remove list_head from tc_action") The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-25net/mlx5e: fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:1339:57-58: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 4c8fb2986d44 ("net/mlx5e: Increase VF representors' SQ size to 128") CC: Gavi Teitz <gavi@mellanox.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+3
2018-12-21net: netxen: fix a missing check and an uninitialized useKangjie Lu1-1/+2
When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used. The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21Merge USB 4.20-rc8 mergepoint into usb-nextGreg Kroah-Hartman45-339/+678
We need the USB changes in here for additional patches to be able to apply cleanly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21net/mlx5e: XDP, Add user control for XDP TX MPWQE featureTariq Toukan3-1/+34
Add ethtool private flag 'xdp_tx_mpwqe' to control the feature from userspace. Feature is set ON by default, if supported. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQETariq Toukan4-27/+173
Add support for the HW feature of multi-packet WQE in XDP xmit flow. The conventional TX descriptor (WQE, Work Queue Element) serves a single packet. Our HW has support for multi-packet WQE (MPWQE) in which a single descriptor serves multiple TX packets. This reduces both the PCI overhead and the CPU cycles wasted on writing them. In this patch we add support for the HW feature, which is supported starting from ConnectX-5. Performance: Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz XDP_TX: We see a huge gain on single port ConnectX-5, and reach the 100 Mpps milestone. * Single-port HCA: Before: 70 Mpps After: 100 Mpps (+42.8%) * Dual-port HCA: Before: 51.7 Mpps After: 57.3 Mpps (+10.8%) * In both cases we tested traffic on one port and for now On Dual-port HCAs we see only small gain, we are working to overcome this bottleneck, but for the moment only with experimental firmware on dual port HCAs we can reach the wanted numbers as seen on Single-port HCAs. XDP_REDIRECT: Redirect from (A) ConnectX-5 to (B) ConnectX-5. Due to a setup limitation, (A) and (B) are on different NUMA nodes, so absolute performance numbers are not optimal. Note: Below is the transmit rate of (B), not the redirect rate of (A) which is in some cases higher. * (B) is single-port: Before: 77 Mpps After: 90 Mpps (+16.8%) * (B) is dual-port: Before: 61 Mpps After: 72 Mpps (+18%) Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Add array for WQE info descriptorsTariq Toukan3-21/+54
Each xdp_wqe_info instance describes the number of data-segments and WQEBBs of the WQE. This is useful for a downstream patch that adds support for Multi-Packet TX WQE feature. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Maintain a FIFO structure for xdp_info instancesTariq Toukan4-24/+65
This provides infrastructure to have multiple xdp_info instances for the same consumer index. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Replace boolean doorbell indication with segment pointerTariq Toukan3-18/+9
Instead of calculating the control segment to be used upon an XDP xmit doorbell, save it in SQ structure. Nullify when no pending doorbell. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Warn upon polling an error CQETariq Toukan1-0/+5
Do not ignore the CQE opcode. This helps expose issues and debug them. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Change the XDP SQ redirect indicationTariq Toukan5-26/+18
Do not maintain an SQ state bit to indicate whether an XDP SQ serves redirect operations. Instead, rely on the fact that such an XDP SQ doesn't reside in an RQ instance, while the others do. This info is not known to the XDP SQ functions themselves, and they rely on their callers to distinguish between the cases. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: XDP, Precede XDP-related operations in RQ poll by a loaded ↵Tariq Toukan3-11/+18
program check At the end of the RQ polling loop, some XDP-related operations might be required. Before checking them one by one, check if an XDP program is even loaded. Combine all the checks and operations in a single function in xdp files. This saves unnecessary checks for non-XDP flows. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21net/mlx5e: TX, Print opcode in error CQE warningTariq Toukan1-3/+4
The opcode indicates about the error reason. Printing it helps in debug. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-17/+10
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-12-21 The following pull-request contains BPF updates for your *net-next* tree. There is a merge conflict in test_verifier.c. Result looks as follows: [...] }, { "calls: cross frame pruning", .insns = { [...] .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .errstr_unpriv = "function calls to other bpf functions are allowed for root only", .result_unpriv = REJECT, .errstr = "!read_ok", .result = REJECT, }, { "jset: functional", .insns = { [...] { "jset: unknown const compare not taken", .insns = { BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_get_prandom_u32), BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1), BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .errstr_unpriv = "!read_ok", .result_unpriv = REJECT, .errstr = "!read_ok", .result = REJECT, }, [...] { "jset: range", .insns = { [...] }, .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, .result_unpriv = ACCEPT, .result = ACCEPT, }, The main changes are: 1) Various BTF related improvements in order to get line info working. Meaning, verifier will now annotate the corresponding BPF C code to the error log, from Martin and Yonghong. 2) Implement support for raw BPF tracepoints in modules, from Matt. 3) Add several improvements to verifier state logic, namely speeding up stacksafe check, optimizations for stack state equivalence test and safety checks for liveness analysis, from Alexei. 4) Teach verifier to make use of BPF_JSET instruction, add several test cases to kselftests and remove nfp specific JSET optimization now that verifier has awareness, from Jakub. 5) Improve BPF verifier's slot_type marking logic in order to allow more stack slot sharing, from Jiong. 6) Add sk_msg->size member for context access and add set of fixes and improvements to make sock_map with kTLS usable with openssl based applications, from John. 7) Several cleanups and documentation updates in bpftool as well as auto-mount of tracefs for "bpftool prog tracelog" command, from Quentin. 8) Include sub-program tags from now on in bpf_prog_info in order to have a reliable way for user space to get all tags of the program e.g. needed for kallsyms correlation, from Song. 9) Add BTF annotations for cgroup_local_storage BPF maps and implement bpf fs pretty print support, from Roman. 10) Fix bpftool in order to allow for cross-compilation, from Ivan. 11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order to be compatible with libbfd and allow for Debian packaging, from Jakub. 12) Remove an obsolete prog->aux sanitation in dump and get rid of version check for prog load, from Daniel. 13) Fix a memory leak in libbpf's line info handling, from Prashant. 14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info does not get unaligned, from Jesper. 15) Fix test_progs kselftest to work with older compilers which are less smart in optimizing (and thus throwing build error), from Stanislav. 16) Cleanup and simplify AF_XDP socket teardown, from Björn. 17) Fix sk lookup in BPF kselftest's test_sock_addr with regards to netns_id argument, from Andrey. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21net: mscc: ocelot: Register poll timeout should be wall time not attemptsSteen Hegelund1-28/+27
When doing indirect access in the Ocelot chip, a command is setup, issued and then we need to poll until the result is ready. The polling timeout is specified in milliseconds in the datasheet and not in register access attempts. It is not a bug on the currently supported platform, but we observed that the code does not work properly on other platforms that we want to support as the timing requirements there are different. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mscc: Configured MAC entries should be locked.Allan W. Nielsen1-1/+1
The MAC table in Ocelot supports auto aging (normal) and static entries. MAC entries that is manually configured should be static and not subject to aging. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Allan Nielsen <allan.nielsen@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21Merge tag 'mlx5-updates-2018-12-19' of ↵David S. Miller9-103/+177
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2018-12-19 This series adds some misc updates and the support for tunnels over VLAN tc offloads. From Miroslav Lichvar, patches #1,2 1) Update timecounter at least twice per counter overflow 2) Extend PTP gettime function to read system clock From Gavi Teitz, patch #3 3) Increase VF representors' SQ size to 128 From Eli Britstein and Or Gerlitz, patches #4-10 4) Adds the capability to support tunnels over VLAN device. Patch 4 avoids crash for TC flow with egress upper devices Patch 5 refactors tunnel routing devs into a helper function Patch 6 avoids crash for TC encap flows with vlan on underlay Patches 7-8 refactor encap tunnel header preparing code. Patch 9 adds support for building VLAN tagged ETH header. Patch 10 adds support for tunnel routing to VLAN device. From Aviv, patches 11,12 to fix earlier VF lag series 5) Fix query_nic_sys_image_guid() error during init 6) Fix LAG requirement when CONFIG_MLX5_ESWITCH is off ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Remove limitation regarding VID 1Ido Schimmel1-5/+0
VID 1 is not reserved anymore, so remove the check that prevented the creation of VLAN devices with this VID over mlxsw ports. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Switch to VID 4095 as default VIDIdo Schimmel3-21/+11
There is no need to abuse VID 1 anymore and we can instead use VID 4095 as the default VLAN, which will be configured on the port throughout its lifetime. The OVS join / leave functions are changed to enable VIDs 1-4094 (inclusive) instead of 2-4095. This because VID 4095 is now the default VLAN instead of 1. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Add an helper function to cleanup VLAN entriesIdo Schimmel1-5/+10
VLAN entries on a port can be associated with either a bridge VLAN or a router port. Before the VLAN entry is destroyed these associations need to be cleaned up. Currently, this is always invoked from the function which destroys the VLAN entry, but next patch is going to skip the destruction of the default entry when a port in unlinked from a LAG. The above does not mean that the associations should not be cleaned up, so add a helper that will be invoked from both call sites. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Store pointer to default port VLAN in port structIdo Schimmel2-0/+2
Subsequent patches will need to access the default port VLAN. Since this VLAN will exist throughout the lifetime of the port, simply store it in the port's struct. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Allow controlling destruction of default port VLANIdo Schimmel1-4/+9
The function allows flushing all the existing VLAN entries on a port. It is invoked when a port is destroyed and when it is unlinked from a LAG. In the latter case, when moving to the new default VLAN, there will not be a need to destroy the default VLAN entry. Therefore, add an argument that allows to control whether the default port VLAN should be destroyed or not. Currently it is always set to 'true'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Set PVID during port initializationIdo Schimmel1-0/+8
Currently, the driver does not set the port's PVID when initializing a new port. This is because the driver is using VID 1 as PVID which is the firmware default. Subsequent patches are going to change the PVID the driver is setting when initializing a new port. Prepare for that by explicitly setting the port's PVID. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum: Replace hard-coded default VID with a defineIdo Schimmel4-15/+20
Subsequent patches are going to replace the current default VID (1) with VLAN_N_VID - 1 (4095). Prepare for this conversion by replacing the hard-coded '1' with a define. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21mlxsw: spectrum_router: Do not force specific configuration orderIdo Schimmel3-2/+24
In symmetric routing, the only two members in the VLAN corresponding to the L3 VNI are the router port and the VXLAN tunnel. In case the VXLAN device is already enslaved to the bridge and only later the VLAN interface is configured, the tunnel will not be offloaded. The reason for this is that when the router interface (RIF) corresponding to the VLAN interface is configured, it calls the core fid_get() API which does not check if NVE should be enabled on the FID. Instead, call into the bridge code which will check if NVE should be enabled on the FID. This effectively means that the same code path is used to retrieve a FID when either a local port or a router port joins the FID. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21Merge branch '1GbE' of ↵David S. Miller13-26/+373
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-12-20 This series contains updates to e100, igb, ixgbe, i40e and ice drivers. I replaced spinlocks for mutex locks to reduce the latency on CPU0 for igb when updating the statistics. This work was based off a patch provided by Jan Jablonsky, which was against an older version of the igb driver. Jesus adjusts the receive packet buffer size from 32K to 30K when running in QAV mode, to stay within 60K for total packet buffer size for igb. Vinicius adds igb kernel documentation regarding the CBS algorithm and its implementation in the i210 family of NICs. YueHaibing from Huawei fixed the e100 driver that was potentially passing a NULL pointer, so use the kernel macro IS_ERR_OR_NULL() instead. Konstantin Khorenko fixes i40e where we were not setting up the neigh_priv_len in our net_device, which caused the driver to read beyond the neighbor entry allocated memory. Miroslav Lichvar extends the PTP gettime() to read the system clock by adding support for PTP_SYS_OFFSET_EXTENDED ioctl in i40e. Young Xiao fixed the ice driver to only enable NAPI on q_vectors that actually have transmit and receive rings. Kai-Heng Feng fixes an igb issue that when placed in suspend mode, the NIC does not wake up when a cable is plugged in. This was due to the driver not setting PME during runtime suspend. Stephen Douthit enables the ixgbe driver allow DSA devices to use the MII interface to talk to switches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge branch 'mlx5-next' into rdma.gitJason Gunthorpe19-146/+238
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5 updates taken for dependencies on following patches. * branche 'mlx5-next': (23 commits) IB/mlx5: Introduce uid as part of alloc/dealloc transport domain net/mlx5: Add shared Q counter bits net/mlx5: Continue driver initialization despite debugfs failure net/mlx5: Fold the modify lag code into function net/mlx5: Add lag affinity info to log net/mlx5: Split the activate lag function into two routines net/mlx5: E-Switch, Introduce flow counter affinity IB/mlx5: Unify e-switch representors load approach between uplink and VFs net/mlx5: Use lowercase 'X' for hex values net/mlx5: Remove duplicated include from eswitch.c net/mlx5: Remove the get protocol device interface entry net/mlx5: Support extended destination format in flow steering command net/mlx5: E-Switch, Change vhca id valid bool field to bit flag net/mlx5: Introduce extended destination fields net/mlx5: Revise gre and nvgre key formats net/mlx5: Add monitor commands layout and event data net/mlx5: Add support for plugged-disabled cable status in PME net/mlx5: Add support for PCIe power slot exceeded error in PME net/mlx5: Rework handling of port module events net/mlx5: Move flow counters data structures from flow steering header ...
2018-12-20ixgbe: use mii_bus to handle MII related ioctlsSteve Douthit1-0/+18
Use the mii_bus callbacks to address the entire clause 22/45 address space. Enables userspace to poke switch registers instead of a single PHY address. The ixgbe firmware may be polling PHYs in a way that is not protected by the mii_bus lock. This isn't new behavior, but as Andrew Lunn pointed out there are more addresses available for conflicts. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-20ixgbe: register a mdiobusSteve Douthit5-0/+309
Most dsa devices expect a 'struct mii_bus' pointer to talk to switches via the MII interface. While this works for dsa devices, it will not work safely with Linux PHYs in all configurations since the firmware of the ixgbe device may be polling some PHY addresses in the background. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 04:36:19 +0300