summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2012-12-108139cp: revert "set ring address before enabling receiver"Francois Romieu1-11/+11
commit b26623dab7eeb1e9f5898c7a49458789dd492f20 upstream. This patch reverts b01af4579ec41f48e9b9c774e70bd6474ad210db. The original patch was tested with emulated hardware. Real hardware chokes. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=47041 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-10bnx2x: remove redundant warning logAriel Elior1-4/+7
commit 4a25417c20fac00b3afd58ce27408f964d19e708 upstream. fix bug where a register which was only meant to be read in 578xx/57712 devices causes a bogus error message to be logged when read from other devices. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03ixgbe: add support for X540-AT1joshua.a.hay@intel.com3-0/+4
commit df376f0de167754da9b3ece4afdb5bb8bf3fbf3e upstream. This patch adds device support for Ethernet Controller X540-AT1. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27r8169: allow multicast packets on sub-8168f chipset.Nathan Walp1-0/+3
commit 0481776b7a70f09acf7d9d97c288c3a8403fbfe4 upstream. RTL_GIGA_MAC_VER_35 includes no multicast hardware filter. Signed-off-by: Nathan Walp <faceprint@faceprint.com> Suggested-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27r8169: Fix WoL on RTL8168d/8111d.Cyril Brulebois1-0/+2
commit b00e69dee4ccbb3a19989e3d4f1385bc2e3406cd upstream. This regression was spotted between Debian squeeze and Debian wheezy kernels (respectively based on 2.6.32 and 3.2). More info about Wake-on-LAN issues with Realtek's 816x chipsets can be found in the following thread: http://marc.info/?t=132079219400004 Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19; more chipsets are likely affected. Tested on top of a 3.2.23 kernel. Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Hinted-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27tg3: unconditionally select HWMON support when tg3 is enabled.Paul Gortmaker2-9/+1
commit de0a41484c47d783dd4d442914815076aa2caac2 upstream. There is the seldom used corner case where HWMON=m at the same time as TIGON3=y (typically randconfigs) which will cause a link fail like: drivers/built-in.o: In function `tg3_close': tg3.c:(.text+0x16bd86): undefined reference to `hwmon_device_unregister' drivers/built-in.o: In function `tg3_hwmon_open': tg3.c:(.text+0x16fc4b): undefined reference to `hwmon_device_register' make[1]: *** [vmlinux] Error 1 Fix it as suggested by DaveM[1] by having the Kconfig logic simply select HWMON when TIGON3 is selected. This gets rid of all the extra IS_ENABLED ifdeffery in tg3.c as a side benefit. [1] http://marc.info/?l=linux-netdev&m=134250573718151&w=2 Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Chan <mchan@broadcom.com> Reported-by: Anisse Astier <anisse@astier.eu> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27r8169: use unlimited DMA burst for TXMichal Schmidt1-1/+1
commit aee77e4accbeb2c86b1d294cd84fec4a12dde3bd upstream. The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have a box where this prevents the interface from using the gigabit line to its full potential. This patch solves the problem by setting TX_DMA_BURST to unlimited. The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl (XID 0c900880). TSO is enabled. I used netperf (TCP_STREAM test) to measure the dependency of TX throughput on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024, '7'=unlimited). This chart shows the results: http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png Interesting points: - With the current DMA burst limit (1024): - at the default MTU=1500 I get only 842 Mbit/s. - when going from small MTU, the performance rises monotonically with increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's a sudden drop to 762 MBit/s from which the throughput rises monotonically again with further MTU increases. - With a smaller DMA burst limit (512): - there's a similar peak at MTU=1076 and another one at MTU=564. - With unlimited DMA burst: - at the default MTU=1500 I get nice 940 Mbit/s. - the throughput rises monotonically with increasing MTU with no strange peaks. Notice that the peaks occur at MTU sizes that are multiples of the DMA burst limit plus 52. Why 52? Because: 20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52 The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too, except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes. CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B", i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs the smaller burst limit, or if any other versions have similar requirements. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin1-0/+1
[ Upstream commit 57c10b61c84bfed68b1b317d6f507a392724b9c4 ] Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18ixgbe: PTP get_ts_info missing software supportJacob Keller1-0/+3
commit 50f8d35de8ba4af311ea1176c534e8b73bb198e5 upstream. This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31tilegx: fix some issues in the SW TSO supportChris Metcalf1-16/+19
commit 3da3fff8006c608f19a51859d44ba47ca8b41461 upstream. This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28skge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboardGraham Gower1-0/+7
[ Upstream commit a2af139ff1cd85df586690ff626619ab1ee88b0a ] Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive packets on a system with >4gb ram unless a 32bit DMA mask is used. This issue has been around for years and a fix was sent 3.5 years ago, but there was some debate as to whether it should instead be fixed as a PCI quirk. http://www.spinics.net/lists/netdev/msg88670.html However, 18 months later a similar workaround was introduced for another chipset exhibiting the same problem. http://www.spinics.net/lists/netdev/msg142287.html Signed-off-by: Graham Gower <graham.gower@gmail.com> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28net: remove skb recyclingEric Dumazet8-102/+16
[ Upstream commits acb600def2110b1310466c0e485c0d26299898ae and 66eef59f22275002f621ff9d951886b513d011b3. ] Over time, skb recycling infrastructure got litle interest and many bugs. Generic rx path skb allocation is now using page fragments for efficient GRO / TCP coalescing, and recyling a tx skb for rx path is not worth the pain. Last identified bug is that fat skbs can be recycled and it can endup using high order pages after few iterations. With help from Maxime Bizon, who pointed out that commit 87151b8689d (net: allow pskb_expand_head() to get maximum tailroom) introduced this regression for recycled skbs. Instead of fixing this bug, lets remove skb recycling. Drivers wanting really hot skbs should use build_skb() anyway, to allocate/populate sk_buff right before netif_receive_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21e1000e: Change wthresh to 1 to avoid possible Tx stallsHiroaki SHIMODA2-4/+4
commit 8edc0e624db3756783233e464879eb2e3b904c13 upstream. This patch originated from Hiroaki SHIMODA but has been modified by Intel with some minor cleanups and additional commit log text. Denys Fedoryshchenko and others reported Tx stalls on e1000e with BQL enabled. Issue was root caused to hardware delays. They were introduced because some of the e1000e hardware with transmit writeback bursting enabled, waits until the driver does an explict flush OR there are WTHRESH descriptors to write back. Sometimes the delays in question were on the order of seconds, causing visible lag for ssh sessions and unacceptable tx completion latency, especially for BQL enabled kernels. To avoid possible Tx stalls, change WTHRESH back to 1. The current plan is to investigate a method for re-enabling WTHRESH while not harming BQL, but those patches will be later for net-next if they work. please enqueue for stable since v3.3 as this bug was introduced in commit 3f0cfa3bc11e7f00c9994e0f469cbc0e7da7b00c Author: Tom Herbert <therbert@google.com> Date: Mon Nov 28 16:33:16 2011 +0000 e1000e: Support for byte queue limits Changes to e1000e to use byte queue limits. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> CC: eric.dumazet@gmail.com CC: therbert@google.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13net: ethernet: davinci_cpdma: decrease the desc count when cleaning up the ↵Tao Hou1-0/+1
remaining packets [ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ] chan->count is used by rx channel. If the desc count is not updated by the clean up loop in cpdma_chan_stop, the value written to the rxfree register in cpdma_chan_start will be incorrect. Signed-off-by: Tao Hou <hotforest@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13ixgbe: fix PTP ethtool timestamping functionJacob Keller1-4/+1
commit 1cc92eb871d6cbb1da038b4bcd89eec3c73b9781 upstream. This patch fixes a development issue that occurred due to invalid modes reported in the ethtool get_ts_info function. The issue is resolved by removing unsupported modes from the Rx supported list. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-28netdev: octeon: fix return value check in octeon_mgmt_init_phy()Wei Yongjun1-3/+1
In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28qlcnic: Fix scheduling while atomic bugNarendra K1-2/+2
In the device close path, 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock held resulting in scheduling while atomic bug causing the following trace. I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4 from John Fastabend addresses a similar issue in ixgbevf driver. Adopting the same approach used in the commit, this patch uses mdelay to address the issue. [79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002 [79885.005562] INFO: lockdep is turned off. [79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic] [79885.083608] Pid: 30846, comm: ip Tainted: G W O 3.6.0-rc7+ #1 [79885.090805] Call Trace: [79885.093569] [<ffffffff816764d8>] __schedule_bug+0x68/0x76 [79885.099699] [<ffffffff8168358e>] __schedule+0x99e/0xa00 [79885.105634] [<ffffffff81683929>] schedule+0x29/0x70 [79885.111186] [<ffffffff81680def>] schedule_timeout+0x16f/0x350 [79885.117724] [<ffffffff811afb7a>] ? init_object+0x4a/0x90 [79885.123770] [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140 [79885.130873] [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20 [79885.138773] [<ffffffff8107e830>] msleep+0x20/0x30 [79885.144159] [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic] [79885.151478] [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic] [79885.159868] [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic] [79885.167576] [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic] [79885.174708] [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic] [79885.181547] [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0 [79885.187899] [<ffffffff8153b548>] __dev_close+0x38/0x50 [79885.193761] [<ffffffff81545101>] __dev_change_flags+0xa1/0x180 [79885.200419] [<ffffffff81545298>] dev_change_flags+0x28/0x70 [79885.206779] [<ffffffff815531b8>] do_setlink+0x378/0xa00 [79885.212731] [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0 [79885.218612] [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560 [79885.224768] [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50 [79885.231217] [<ffffffff812cbf98>] ? security_capable+0x18/0x20 [79885.237765] [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0 [79885.244412] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.250280] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.256148] [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20 [79885.262413] [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0 [79885.268661] [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40 [79885.274727] [<ffffffff815708bd>] netlink_unicast+0x19d/0x220 [79885.281146] [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0 [79885.287595] [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0 [79885.294650] [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0 [79885.300600] [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0 [79885.306853] [<ffffffff8109be23>] ? up_read+0x23/0x40 [79885.312510] [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570 [79885.318968] [<ffffffff81191854>] ? sys_brk+0x44/0x150 [79885.324715] [<ffffffff811c458c>] ? fget_light+0x24c/0x520 [79885.330875] [<ffffffff815286f9>] sys_sendmsg+0x49/0x90 [79885.336707] [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28bnx2: Clean up remaining iounmapNeil Horman1-1/+1
commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error path of bnx2_init_one though. This patch just cleans that up. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Michael Chan <mcan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27netdev: pasemi: fix return value check in pasemi_mac_phy_init()Wei Yongjun1-2/+2
In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds9-22/+41
Pull networking updates from David Miller: "More bug fixes, nothing gets past these guys" 1) More kernel info leaks found by Mathias Krause, this time in the IPSEC configuration layers. 2) When IPSEC policies change, we do not properly make sure that cached routes (which could now be stale) throughout the system will be revalidated. Fix this by generalizing the generation count invalidation scheme used by ipv4. From Nicolas Dichtel. 3) When repairing TCP sockets, we need to allow to restore not just the send window scale, but the receive one too. Extend the existing interface to achieve this in a backwards compatible way. From Andrey Vagin. 4) A fix for FCOE scatter gather feature validation erroneously caused scatter gather to be disabled for things like AOE too. From Ed L Cashin. 5) Several cases of mishandling of error pointers, from Mathias Krause, Wei Yongjun, and Devendra Naga. 6) Fix gianfar build, from Richard Cochran. 7) CAP_NET_* failures should return -EPERM not -EACCES, from Zhao Hongjiang. 8) Hardware reset fix in janz-ican3 CAN driver, from Ira W Snyder. 9) Fix oops during rmmod in ti_hecc CAN driver, from Marc Kleine-Budde. 10) The removal of the conditional compilation of the clk support code in the stmmac driver broke things. This is because the interfaces used are the ones that don't also perform the enable/disable of the clk. Fix from Stefan Roese. 11) The QFQ packet scheduler can record out of range virtual start times, resulting later in misbehavior and even crashes. Fix from Paolo Valente. 12) If MSG_WAITALL is used with IOAT DMA under TCP, we can wedge the receiver when the advertised receive window goes to zero. Detect this case and force the processing of the IOAT DMA queue when it happens to avoid getting stuck. Fix from Michal Kubecek. 13) batman-adv assumes that test_bit() returns only 0 or 1, but this is not true for x86 (which returns -1 or 0, via the 'sbb' instruction). Fix from Linus Lussing. 14) Fix small packet corruption in e1000, from Tushar Dave. 15) make_blackhole() in the IPSEC policy code can do one read unlock too many, fix from Li RongQing. 16) The new tcp_try_coalesce() code introduced a bug in TCP URG handling, fix from Eric Dumazet. 17) Fix memory leak in __netif_receive_skb() when doing zerocopy and when hit an OOM condition. From Michael S Tsirkin. 18) netxen blindly deferences pdev->bus->self, which is not guarenteed to be non-NULL. Fix from Nikolay Aleksandrov. 19) Fix a performance regression caused by mistakes in ipv6 checksum validation in the bnx2x driver, fix from Michal Schmidt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net/stmmac: Use clk_prepare_enable and clk_disable_unprepare net: change return values from -EACCES to -EPERM net/irda: sh_sir: fix return value check in sh_sir_set_baudrate() stmmac: fix return value check in stmmac_open_ext_timer() gianfar: fix phc index build failure ipv6: fix return value check in fib6_add() bnx2x: remove false warning regarding interrupt number can: ti_hecc: fix oops during rmmod can: janz-ican3: fix support for older hardware revisions net: do not disable sg for packets requiring no checksum aoe: assert AoE packets marked as requiring no checksum at91ether: return PTR_ERR if call to clk_get fails xfrm_user: don't copy esn replay window twice for new states xfrm_user: ensure user supplied esn replay window is valid xfrm_user: fix info leak in copy_to_user_tmpl() xfrm_user: fix info leak in copy_to_user_policy() xfrm_user: fix info leak in copy_to_user_state() xfrm_user: fix info leak in copy_to_user_auth() net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 tcp: restore rcv_wscale in a repair mode (v2) ...
2012-09-21net/stmmac: Use clk_prepare_enable and clk_disable_unprepareStefan Roese2-8/+8
This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21stmmac: fix return value check in stmmac_open_ext_timer()Wei Yongjun1-1/+1
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21gianfar: fix phc index build failureRichard Cochran2-2/+3
This patch fixes a build failure introduced in commit 66636287 ("gianfar: Support the get_ts_info ethtool method."). Not only was a global variable inconsistently named, but also it was not exported as it should have been. This fix is also needed in stable version 3.5. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21bnx2x: remove false warning regarding interrupt numberAriel Elior1-5/+6
Since version 7.4 the FW configures in the pci config space the max number of interrupts available to the physical function, instead of the exact number to use. This causes a false warning in driver when comparing the number of configured interrupts to the number about to be used. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21at91ether: return PTR_ERR if call to clk_get failsDevendra Naga1-1/+1
we are currently returning ENODEV, as the clk_get may give a exact error code in its returned pointer, assign it to the ret by using the PTR_ERR function, so that the subsequent goto label will jump to the error path and clean the driver and return the error correctly. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19e1000: Small packets may get corrupted during padding by HWTushar Dave1-0/+11
On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, packets may get corrupted during padding by HW. To WA this issue, pad all small packets manually. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19netxen: check for root bus in netxen_mask_aer_correctableNikolay Aleksandrov1-0/+4
Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19bnx2x: fix rx checksum validation for IPv6Michal Schmidt1-5/+7
Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance regression for IPv6. Rx checksum offload does not work. IPv6 packets are passed to the stack with CHECKSUM_NONE. The hardware obviously cannot perform IP checksum validation for IPv6, because there is no checksum in the IPv6 header. This should not prevent us from setting CHECKSUM_UNNECESSARY. Tested on BCM57711. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds2-17/+23
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA fixes from Roland Dreier: - A couple more IPoIB fixes for regressions introduced by path database conversion - Minor other fixes to low-level drivers (cxgb4, mlx4, qib, ocrdma) * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Fix failure of compliance test C14-024#06_LocalPortNum RDMA/ocrdma: Fix CQE expansion of unsignaled WQE mlx4_core: Fix integer overflows so 8TBs of memory registration works IPoIB: Fix AB-BA deadlock when deleting neighbours IPoIB: Fix memory leak in the neigh table deletion flow RDMA/cxgb4: Move dereference below NULL test
2012-09-14mlx4_core: Fix integer overflows so 8TBs of memory registration worksYishai Hadas2-17/+23
This patch adds on the fixes done in commits 89dd86db78e0 ("mlx4_core: Allow large mlx4_buddy bitmaps") and 3de819e6b642 ("mlx4_core: Fix integer overflow issues around MTT table") so that memory registration of up to 8TB (log_num_mtt=31) finally works. It fixes integer overflows in a few mlx4_table_yyy routines in icm.c by using a u64 intermediate variable, and int/uint issues that caused table indexes to become nagive by setting some variables to be u32 instead of int. These problems cause crashes when a user attempted to register > 512GB of RAM. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-14bnx2x: Add missing afex codeYuval Mintz2-11/+21
Commit a334872224a67b614dc888460377862621f3dac7 added afex support but lacked several logical changes. This lack can cause afex to crash, and also have a slight effect on other flows (i.e., driver always assumes the Tx ring has less available buffers than what it actually has). This patch adds the missing segments, fixing said issues. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14bnx2x: fix registers dumpedDmitry Kravkov2-18/+9
Under traffic, there are several registers that when read (e.g., via 'ethtool -d') may cause the chip to stall. This patch corrects the registers read in such flows. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14bnx2x: correct advertisement of pause capabilitiesYaniv Rosner1-0/+6
This patch propagates users' requested flow-control into the link layer, which will later be used to advertise this flow-control for auto-negotiation (until now these values were ignored). Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14bnx2x: display the correct duplex valueYaniv Rosner1-4/+6
Prior to this fix, the driver reported the chip's active duplex state is always 'full', even if using half-duplex mode. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14bnx2x: prevent timeouts when using PFCYaniv Rosner1-3/+5
Prevent updating the xmac PFC configuration when using a link speed slower than 10G -the umac block is responsible for 1G or slower connections, therefore it is possible the xmac block is reset when connection is slower. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14bnx2x: fix stats copying logicYuval Mintz1-2/+5
FW needs the driver statistics for management. Current logic is broken in that the function that gathers the port statistics does not copy its own statistics to a place where the FW can use it. This patch causes every function that can pass statistics to the FW to do so. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-14bnx2x: Avoid sending multiple statistics queriesDmitry Kravkov1-3/+5
During traffic when DCB is enabled, it is possible for multiple instances of statistics queries to be sent to the chip - this may cause the FW to assert. This patch prevents the sending of an additional instance of statistics query while the previous query hasn't completed. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07|PATCH] seeq: Add missing spinlock initJean Delvare1-0/+1
It doesn't seem this spinlock was properly initialized. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Return the error value in case of command initialization failureEugenia Emantayev1-1/+2
If mlx4_cmd_init() failed, the init_one function returned success, although no resources were opened. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Fixing error flow in case of QUERY_FW failureAviad Yehezkel1-6/+7
The order of operations was wrong on the teardown flow. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Looking for promiscuous entries on the correct portAviad Yehezkel1-8/+8
The search for promisc entries was always done on the first port, While the addition is done on the correct port. This lead to resource leackage of promisc entries on the second port and brought to a state where we could no longer enter to promiscuous mode after enough iterations of "ifconfig promisc" on the second port. Fix that by using the correct port when searching. Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Add security check / enforcement for flow steering rules set ↵Hadar Hen Zion1-0/+116
for VMs Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07net/mlx4_core: Put Firmware flow steering structures in common header filesHadar Hen Zion2-83/+83
To allow for usage of the flow steering Firmware structures in more locations over the driver, such as the resource tracker, move them from mcg.c to common header files. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-06ibmveth: Fix alignment of rx queue bugSantiago Leon1-17/+9
This patch fixes a bug found by Nish Aravamudan (https://lkml.org/lkml/2012/5/15/220) where the driver is not following the spec (it is not aligning the rx buffer on a 16-byte boundary) and the hypervisor aborts the registration, making the device unusable. The fix follows BenH's recommendation (https://lkml.org/lkml/2012/7/20/461) to replace the kmalloc+map for a single call to dma_alloc_coherent() because that function always aligns to a 16-byte boundary. The stable trees will run into this bug whenever the rx buffer kmalloc call returns something not aligned on a 16-byte boundary. Cc: <stable@vger.kernel.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-04i825xx: fix paging fault on znet_probe()Wu Fengguang1-4/+9
In znet_probe(), strncmp() may access beyond 0x100000 and trigger the below oops in kvm. Fix it by limiting the loop under 0x100000-8. I suspect the limit could be further decreased to 0x100000-sizeof(struct netidblk), however no datasheet at hand.. [ 3.744312] BUG: unable to handle kernel paging request at 80100000 [ 3.746145] IP: [<8119d12a>] strncmp+0xc/0x20 [ 3.747446] *pde = 01d10067 *pte = 00100160 [ 3.747493] Oops: 0000 [#1] DEBUG_PAGEALLOC [ 3.747493] Pid: 1, comm: swapper Not tainted 3.6.0-rc1-00018-g57bfc0a #73 Bochs Bochs [ 3.747493] EIP: 0060:[<8119d12a>] EFLAGS: 00010206 CPU: 0 [ 3.747493] EIP is at strncmp+0xc/0x20 [ 3.747493] EAX: 800fff4e EBX: 00000006 ECX: 00000006 EDX: 814d2bb9 [ 3.747493] ESI: 80100000 EDI: 814d2bba EBP: 8e03dfa0 ESP: 8e03df98 [ 3.747493] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 3.747493] CR0: 8005003b CR2: 80100000 CR3: 016f7000 CR4: 00000690 [ 3.747493] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 3.747493] DR6: ffff0ff0 DR7: 00000400 [ 3.747493] Process swapper (pid: 1, ti=8e03c000 task=8e040000 task.ti=8e03c000) [ 3.747493] Stack: [ 3.747493] 800fffff 00000000 8e03dfb4 816a1376 00000006 816a134a 00000000 8e03dfd0 [ 3.747493] 816819b5 816ed1c0 8e03dfe4 00000006 00000123 816ed604 8e03dfe4 81681b29 [ 3.747493] 00000000 81681a5b 00000000 00000000 8134e542 00000000 00000000 00000000 [ 3.747493] Call Trace: [ 3.747493] [<816a1376>] znet_probe+0x2c/0x26b [ 3.747493] [<816a134a>] ? dnet_driver_init+0xf/0xf [ 3.747493] [<816819b5>] do_one_initcall+0x6a/0x110 [ 3.747493] [<81681b29>] kernel_init+0xce/0x14b Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-01net: ethernet: fix kernel OOPS when remove davinci_mdio moduleBin Liu1-1/+3
davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31cs89x0 : packet reception not workingJaccon Bastiaansen1-5/+5
The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30bnx2x: Correct the ndo_poll_controller callMerav Sicron1-3/+5
This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30bnx2x: Move netif_napi_add to the open callMerav Sicron5-13/+10
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30e1000e: DoS while TSO enabled caused by link partner with small MSSBruce Allan2-25/+24
With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Stable <stable@vger.kernel.org> [2.6.24+] Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 09:37:18 +0300