summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
41 hoursnet/mlx5e: Preserve shared buffer capacity during headroom updatesArmen Ratner1-10/+8
[ Upstream commit 8b0587a885fdb34fd6090a3f8625cb7ac1444826 ] When port buffer headroom changes, port_update_shared_buffer() recalculates the shared buffer size and splits it in a 3:1 ratio (lossy:lossless) - Currently, the calculation is: lossless = shared / 4; lossy = (shared / 4) * 3; Meaning, the calculation dropped the remainder of shared % 4 due to integer division, unintentionally reducing the total shared buffer by up to three cells on each update. Over time, this could shrink the buffer below usable size. Fix it by changing the calculation to: lossless = shared / 4; lossy = shared - lossless; This retains all buffer cells while still approximating the intended 3:1 split, preventing capacity loss over time. While at it, perform headroom calculations in units of cells rather than in bytes for more accurate calculations avoiding extra divisions. Fixes: a440030d8946 ("net/mlx5e: Update shared buffer along with device buffer changes") Signed-off-by: Armen Ratner <armeng@nvidia.com> Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Alexei Lazar <alazar@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet/mlx5e: Query FW for buffer ownershipAlexei Lazar4-4/+31
[ Upstream commit 451d2849ea66659040b59ae3cb7e50cc97404733 ] The SW currently saves local buffer ownership when setting the buffer. This means that the SW assumes it has ownership of the buffer after the command is set. If setting the buffer fails and we remain in FW ownership, the local buffer ownership state incorrectly remains as SW-owned. This leads to incorrect behavior in subsequent PFC commands, causing failures. Instead of saving local buffer ownership in SW, query the FW for buffer ownership when setting the buffer. This ensures that the buffer ownership state is accurately reflected, avoiding the issues caused by incorrect ownership states. Fixes: ecdf2dadee8e ("net/mlx5e: Receive buffer support for DCBX") Signed-off-by: Alexei Lazar <alazar@nvidia.com> Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet/mlx5: Base ECVF devlink port attrs from 0Daniel Jurgens1-1/+3
[ Upstream commit bc17455bc843b2f4b206e0bb8139013eb3d3c08b ] Adjust the vport number by the base ECVF vport number so the port attributes start at 0. Previously the port attributes would start 1 after the maximum number of host VFs. Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250820133209.389065-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursOcteontx2-af: Skip overlap check for SPI fieldHariprasad Kelam1-2/+2
[ Upstream commit 8c5d95988c34f0aeba1f34cd5e4ba69494c90c5f ] Octeontx2/CN10K silicon supports generating a 256-bit key per packet. The specific fields to be extracted from a packet for key generation are configurable via a Key Extraction (MKEX) Profile. The AF driver scans the configured extraction profile to ensure that fields from upper layers do not overwrite fields from lower layers in the key. Example Packet Field Layout: LA: DMAC + SMAC LB: VLAN LC: IPv4/IPv6 LD: TCP/UDP Valid MKEX Profile Configuration: LA -> DMAC -> key_offset[0-5] LC -> SIP -> key_offset[20-23] LD -> SPORT -> key_offset[30-31] Invalid MKEX profile configuration: LA -> DMAC -> key_offset[0-5] LC -> SIP -> key_offset[20-23] LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field In another scenario, if the MKEX profile is configured to extract the SPI field from both AH and ESP headers at the same key offset, the driver rejecting this configuration. In a regular traffic, ipsec packet will be having either AH(LD) or ESP (LE). This patch relaxes the check for the same. Fixes: 12aa0a3b93f3 ("octeontx2-af: Harden rule validation.") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet: airoha: ppe: Do not invalid PPE entries in case of SW hash collisionLorenzo Bianconi1-3/+1
[ Upstream commit 9f6b606b6b37e61427412708411e8e04b1a858e8 ] SW hash computed by airoha_ppe_foe_get_entry_hash routine (used for foe_flow hlist) can theoretically produce collisions between two different HW PPE entries. In airoha_ppe_foe_insert_entry() if the collision occurs we will mark the second PPE entry in the list as stale (setting the hw hash to 0xffff). Stale entries are no more updated in airoha_ppe_foe_flow_entry_update routine and so they are removed by Netfilter. Fix the problem not marking the second entry as stale in airoha_ppe_foe_insert_entry routine if we have already inserted the brand new entry in the PPE table and let Netfilter remove real stale entries according to their timestamp. Please note this is just a theoretical issue spotted reviewing the code and not faced running the system. Fixes: cd53f622611f9 ("net: airoha: Add L2 hw acceleration support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250818-airoha-en7581-hash-collision-fix-v1-1-d190c4b53d1c@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursigc: fix disabling L1.2 PCI-E link substate on I226 on initValdikSS1-7/+7
[ Upstream commit 1468c1f97cf32418e34dbb40b784ed9333b9e123 ] Device ID comparison in igc_is_device_id_i226 is performed before the ID is set, resulting in always failing check on init. Before the patch: * L1.2 is not disabled on init * L1.2 is properly disabled after suspend-resume cycle With the patch: * L1.2 is properly disabled both on init and after suspend-resume How to test: Connect to the 1G link with 300+ mbit/s Internet speed, and run the download speed test, such as: curl -o /dev/null http://speedtest.selectel.ru/1GB Without L1.2 disabled, the speed would be no more than ~200 mbit/s. With L1.2 disabled, the speed would reach 1 gbit/s. Note: it's required that the latency between your host and the remote be around 3-5 ms, the test inside LAN (<1 ms latency) won't trigger the issue. Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com Fixes: 0325143b59c6 ("igc: disable L1.2 PCI-E link substate to avoid performance issue") Signed-off-by: ValdikSS <iam@valdikss.org.ru> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250819222000.3504873-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursixgbe: xsk: resolve the negative overflow of budget in ixgbe_xmit_zcJason Xing1-1/+3
[ Upstream commit 4d4d9ef9dfee877d494e5418f68a1016ef08cad6 ] Resolve the budget negative overflow which leads to returning true in ixgbe_xmit_zc even when the budget of descs are thoroughly consumed. Before this patch, when the budget is decreased to zero and finishes sending the last allowed desc in ixgbe_xmit_zc, it will always turn back and enter into the while() statement to see if it should keep processing packets, but in the meantime it unexpectedly decreases the value again to 'unsigned int (0--)', namely, UINT_MAX. Finally, the ixgbe_xmit_zc returns true, showing 'we complete cleaning the budget'. That also means 'clean_complete = true' in ixgbe_poll. The true theory behind this is if that budget number of descs are consumed, it implies that we might have more descs to be done. So we should return false in ixgbe_xmit_zc to tell napi poll to find another chance to start polling to handle the rest of descs. On the contrary, returning true here means job done and we know we finish all the possible descs this time and we don't intend to start a new napi poll. It is apparently against our expectations. Please also see how ixgbe_clean_tx_irq() handles the problem: it uses do..while() statement to make sure the budget can be decreased to zero at most and the negative overflow never happens. The patch adds 'likely' because we rarely would not hit the loop condition since the standard budget is 256. Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Priya Singh <priyax.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250819222000.3504873-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursmicrochip: lan865x: fix missing Timer Increment config for Rev.B0/B1Parthiban Veerasooran1-0/+19
[ Upstream commit 2cd58fec912acec273cb155911ab8f06ddbb131a ] Fix missing configuration for LAN865x silicon revisions B0 and B1 as per Microchip Application Note AN1760 (Rev F, June 2024). The Timer Increment register was not being set, which is required for accurate timestamping. As per the application note, configure the MAC to set timestamping at the end of the Start of Frame Delimiter (SFD), and set the Timer Increment register to 40 ns (corresponding to a 25 MHz internal clock). Link: https://www.microchip.com/en-us/application-notes/an1760 Fixes: 5cd2340cb6a3 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY") Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250818060514.52795-3-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursmicrochip: lan865x: fix missing netif_start_queue() call on device openParthiban Veerasooran1-0/+2
[ Upstream commit 1683fd1b2fa79864d3c7a951d9cea0a9ba1a1923 ] This fixes an issue where the transmit queue is started implicitly only the very first time the device is registered. When the device is taken down and brought back up again (using `ip` or `ifconfig`), the transmit queue is not restarted, causing packet transmission to hang. Adding an explicit call to netif_start_queue() in lan865x_net_open() ensures the transmit queue is properly started every time the device is reopened. Fixes: 5cd2340cb6a3 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY") Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Link: https://patch.msgid.link/20250818060514.52795-2-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet/mlx5: CT: Use the correct counter offsetVlad Dogaru1-0/+2
[ Upstream commit d2d6f950cb43be6845a41cac5956cb2a10e657e5 ] Specifying the counter action is not enough, as it is used by multiple counters that were allocated in a bulk. By omitting the offset, rules will be associated with a different counter from the same bulk. Subsequently, the CT subsystem checks the correct counter, assumes that no traffic has triggered the rule, and ages out the rule. The end result is intermittent offloading of long lived connections, as rules are aged out then promptly re-added. Fix this by specifying the correct offset along with the counter rule. Fixes: 34eea5b12a10 ("net/mlx5e: CT: Add initial support for Hardware Steering") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-8-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet/mlx5: HWS, Fix table creation UIDAlex Vesker7-5/+20
[ Upstream commit 8a51507320ebddaab32610199774f69cd7d53e78 ] During table creation, caller passes a UID using ft_attr. The UID value was ignored, which leads to problems when the caller sets the UID to a non-zero value, such as SHARED_RESOURCE_UID (0xffff) - the internal FT objects will be created with UID=0. Fixes: 0869701cba3d ("net/mlx5: HWS, added FW commands handling") Signed-off-by: Alex Vesker <valex@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-7-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet/mlx5: HWS, fix complex rules rehash error flowYevgeny Kliteynik1-13/+28
[ Upstream commit 4a842b1bf18a32ee0c25dd6dd98728b786a76fe4 ] Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. Similar to the simple rules, complex rules rehash logic suffers from the same problems. This patch fixes the error flow for moving complex rules: - If new rule creation fails before it was even enqeued, do not poll for completion - If TIMEOUT happened while moving the rule, no point trying to poll for completions for other rules. Something is broken, completion won't come, just abort the rehash sequence. - If some other completion with error received, don't give up. Continue handling rest of the rules to minimize the damage. - Make sure that the first error code that was received will be actually returned to the caller instead of replacing it with the generic error code. All the aforementioned issues stem from the same bad error flow, so no point fixing them one by one and leaving partially broken code - fixing them in one patch. Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet/mlx5: HWS, fix bad parameter in CQ creationYevgeny Kliteynik1-1/+0
[ Upstream commit 2462c1b9217246a889ec318b3894d84e4dd709c6 ] 'cqe_sz' valid value should be 0 for 64-byte CQE. Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet: stmmac: thead: Enable TX clock before MAC initializationYao Zi1-1/+8
[ Upstream commit 6d6714bf0c4e8eb2274081b4b023dfa01581c123 ] The clk_tx_i clock must be supplied to the MAC for successful initialization. On TH1520 SoC, the clock is provided by an internal divider configured through GMAC_PLLCLK_DIV register when using RGMII interface. However, currently we don't setup the divider before initialization of the MAC, resulting in DMA reset failures if the bootloader/firmware doesn't enable the divider, [ 7.839601] thead-dwmac ffe7060000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 7.938338] thead-dwmac ffe7060000.ethernet eth0: PHY [stmmac-0:02] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 8.160746] thead-dwmac ffe7060000.ethernet eth0: Failed to reset the dma [ 8.170118] thead-dwmac ffe7060000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 8.179384] thead-dwmac ffe7060000.ethernet eth0: __stmmac_open: Hw setup failed Let's simply write GMAC_PLLCLK_DIV_EN to GMAC_PLLCLK_DIV to enable the divider before MAC initialization. Note that for reconfiguring the divisor, the divider must be disabled first and re-enabled later to make sure the new divisor take effect. The exact clock rate doesn't affect MAC's initialization according to my test. It's set to the speed required by RGMII when the linkspeed is 1Gbps and could be reclocked later after link is up if necessary. Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC") Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Link: https://patch.msgid.link/20250815104803.55294-1-ziyao@disroot.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursgve: prevent ethtool ops after shutdownJordan Rhee1-0/+2
[ Upstream commit 75a9a46d67f46d608205888f9b34e315c1786345 ] A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver. Fixes: 974365e51861 ("gve: Implement suspend/resume/shutdown") Signed-off-by: Jordan Rhee <jordanrhee@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250818211245.1156919-1-jeroendb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet: ti: icssg-prueth: Fix HSR and switch offload Enablement during firwmare ↵MD Danish Anwar1-31/+41
reload. [ Upstream commit 01792bc3e5bdafa171dd83c7073f00e7de93a653 ] To enable HSR / Switch offload, certain configurations are needed. Currently they are done inside icssg_change_mode(). This function only gets called if we move from one mode to another without bringing the links up / down. Once in HSR / Switch mode, if we bring the links down and bring it back up again. The callback sequence is, - emac_ndo_stop() Firmwares are stopped - emac_ndo_open() Firmwares are loaded In this path icssg_change_mode() doesn't get called and as a result the configurations needed for HSR / Switch is not done. To fix this, put all these configurations in a separate function icssg_enable_fw_offload() and call this from both icssg_change_mode() and emac_ndo_open() Fixes: 56375086d093 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet: ethernet: mtk_ppe: add RCU lock around dev_fill_forward_pathQingfang Deng1-0/+2
[ Upstream commit 62c30c544359aa18b8fb2734166467a07d435c2d ] Ensure ndo_fill_forward_path() is called with RCU lock held. Fixes: 2830e314778d ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan") Signed-off-by: Qingfang Deng <dqfext@gmail.com> Link: https://patch.msgid.link/20250814012559.3705-1-dqfext@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursbnxt_en: Fix lockdep warning during rmmodMichael Chan1-1/+1
[ Upstream commit 4611d88a37cfc18cbabc6978aaf7325d1ae3f53a ] The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursmlxsw: spectrum: Forward packets with an IPv4 link-local source IPIdo Schimmel2-0/+3
[ Upstream commit f604d3aaf64ff0d90cc875295474d3abf4155629 ] By default, the device does not forward IPv4 packets with a link-local source IP (i.e., 169.254.0.0/16). This behavior does not align with the kernel which does forward them. Fix by instructing the device to forward such packets instead of dropping them. Fixes: ca360db4b825 ("mlxsw: spectrum: Disable DIP_LINK_LOCAL check in hardware pipeline") Reported-by: Zoey Mertes <zoey@cloudflare.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/6721e6b2c96feb80269e72ce8d0b426e2f32d99c.1755174341.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursrtase: Fix Rx descriptor CRC error bit definitionJustin Lai1-1/+1
[ Upstream commit 065c31f2c6915b38f45b1c817b31f41f62eaa774 ] The CRC error bit is located at bit 17 in the Rx descriptor, but the driver was incorrectly using bit 16. Fix it. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursnet: xilinx: axienet: Fix RX skb ring management in DMAengine modeSuraj Gupta1-2/+6
[ Upstream commit fd980bf6e9cdae885105685259421164f843ca55 ] Submit multiple descriptors in axienet_rx_cb() to fill Rx skb ring. This ensures the ring "catches up" on previously missed allocations. Increment Rx skb ring head pointer after BD is successfully allocated. Previously, head pointer was incremented before verifying if descriptor is successfully allocated and has valid entries, which could lead to ring state inconsistency if descriptor setup failed. These changes improve reliability by maintaining adequate descriptor availability and ensuring proper ring buffer state management. Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Link: https://patch.msgid.link/20250813135559.1555652-1-suraj.gupta2@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
41 hoursixgbe: prevent from unwanted interface name changesJedrzej Jagielski1-0/+1
[ upstream commit e67a0bc3ed4fd8ee1697cb6d937e2b294ec13b5e ] Users of the ixgbe driver report that after adding devlink support by the commit a0285236ab93 ("ixgbe: add initial devlink support") their configs got broken due to unwanted changes of interface names. It's caused by automatic phys_port_name generation during devlink port initialization flow. To prevent from that set no_phys_port_name flag for ixgbe devlink ports. Reported-by: David Howells <dhowells@redhat.com> Closes: https://lore.kernel.org/netdev/3452224.1745518016@warthog.procyon.org.uk/ Reported-by: David Kaplan <David.Kaplan@amd.com> Closes: https://lore.kernel.org/netdev/LV3PR12MB92658474624CCF60220157199470A@LV3PR12MB9265.namprd12.prod.outlook.com/ Fixes: a0285236ab93 ("ixgbe: add initial devlink support") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: stable@vger.kernel.org # 6.16 Tested-By: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysionic: clean dbpage in de-initShannon Nelson1-4/+3
[ Upstream commit c9080abea1e69b8b1408ec7dec0acdfdc577a3e2 ] Since the kern_dbpage gets set up in ionic_lif_init() and that function's error path will clean it if needed, the kern_dbpage on teardown should be cleaned in ionic_lif_deinit(), not in ionic_lif_free(). As it is currently we get a double call to iounmap() on kern_dbpage if the PCI ionic fails setting up the lif. One example of this is when firmware isn't responding to AdminQ requests and ionic's first AdminQ call fails to setup the NotifyQ. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysgve: Return error for unknown admin queue commandAlok Tiwari1-0/+1
[ Upstream commit b11344f63fdd9e8c5121148a6965b41079071dd2 ] In gve_adminq_issue_cmd(), return -EINVAL instead of 0 when an unknown admin queue command opcode is encountered. This prevents the function from silently succeeding on invalid input and prevents undefined behavior by ensuring the function fails gracefully when an unrecognized opcode is provided. These changes improve error handling. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250616054504.1644770-2-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysdpaa_eth: don't use fixed_phy_change_carrierHeiner Kallweit1-2/+0
[ Upstream commit d8155c1df5c8b717052567b188455d41fa7a8908 ] This effectively reverts 6e8b0ff1ba4c ("dpaa_eth: Add change_carrier() for Fixed PHYs"). Usage of fixed_phy_change_carrier() requires that fixed_phy_register() has been called before, directly or indirectly. And that's not the case in this driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/7eb189b3-d5fd-4be6-8517-a66671a4e4e3@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 dayseth: bnxt: take page size into account for page pool recycling ringsJakub Kicinski1-3/+5
[ Upstream commit f7dbedba63124256feb9d9fcf36e8a2e43858d1e ] The Rx rings are filled with Rx buffers. Which are supposed to fit packet headers (or MTU if HW-GRO is disabled). The aggregation buffers are filled with "device pages". Adjust the sizes of the page pool recycling ring appropriately, based on ratio of the size of the buffer on given ring vs system page size. Otherwise on a system with 64kB pages we end up with >700MB of memory sitting in every single page pool cache. Correct the size calculation for the head_pool. Since the buffers there are always small I'm pretty sure I meant to cap the size at 1k, rather than make it the lowest possible size. With 64k pages 1k cache with a 1k ring is 64x larger than we need. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250626165441.4125047-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: fec: allow disable coalescingJonas Rebmann1-18/+16
[ Upstream commit b7ad21258f9e9a7f58b19595d5ceed2cde3bed68 ] In the current implementation, IP coalescing is always enabled and cannot be disabled. As setting maximum frames to 0 or 1, or setting delay to zero implies immediate delivery of single packets/IRQs, disable coalescing in hardware in these cases. This also guarantees that coalescing is never enabled with ICFT or ICTT set to zero, a configuration that could lead to unpredictable behaviour according to i.MX8MP reference manual. Signed-off-by: Jonas Rebmann <jre@pengutronix.de> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250626-fec_deactivate_coalescing-v2-1-0b217f2e80da@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: enetc: separate 64-bit counters from enetc_port_countersWei Fang2-1/+15
[ Upstream commit 9fe5f7145ad746e1b8e7522b8a955f642ff1b404 ] Some counters in enetc_port_counters are 32-bit registers, and some are 64-bit registers. But in the current driver, they are all read through enetc_port_rd(), which can only read a 32-bit value. Therefore, separate 64-bit counters (enetc_pm_counters) from enetc_port_counters and use enetc_port_rd64() to read the 64-bit statistics. Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250627021108.3359642-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: atlantic: add set_power to fw_ops for atl2 to fix wolEric Work2-0/+41
[ Upstream commit fad9cf216597a71936ac87143d1618fbbcf97cbe ] Aquantia AQC113(C) using ATL2FW doesn't properly prepare the NIC for enabling wake-on-lan. The FW operation `set_power` was only implemented for `hw_atl` and not `hw_atl2`. Implement the `set_power` functionality for `hw_atl2`. Tested with both AQC113 and AQC113C devices. Confirmed you can shutdown the system and wake from S5 using magic packets. NIC was previously powered off when entering S5. If the NIC was configured for WOL by the Windows driver, loading the atlantic driver would disable WOL. Partially cherry-picks changes from commit, https://github.com/Aquantia/AQtion/commit/37bd5cc Attributing original authors from Marvell for the referenced commit. Closes: https://github.com/Aquantia/AQtion/issues/70 Co-developed-by: Igor Russkikh <irusskikh@marvell.com> Co-developed-by: Mark Starovoitov <mstarovoitov@marvell.com> Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com> Co-developed-by: Pavel Belous <pbelous@marvell.com> Co-developed-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Eric Work <work.eric@gmail.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Link: https://patch.msgid.link/20250629051535.5172-1-work.eric@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: thunderx: Fix format-truncation warning in bgx_acpi_match_id()Alok Tiwari1-2/+2
[ Upstream commit 53d20606c40678d425cc03f0978c614dca51f25e ] The buffer bgx_sel used in snprintf() was too small to safely hold the formatted string "BGX%d" for all valid bgx_id values. This caused a -Wformat-truncation warning with `Werror` enabled during build. Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in snprintf() to ensure safety and suppress the warning. Build warning: CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function ‘bgx_acpi_match_id’: drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Werror=format-truncation=] snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); ^~ drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note: directive argument in the range [0, 255] snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); ^~~~~~~ drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note: ‘snprintf’ output between 5 and 7 bytes into a destination of size 5 snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); compiler warning due to insufficient snprintf buffer size. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250711140532.2463602-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet/mlx5e: Properly access RCU protected qdisc_sleeping variableLeon Romanovsky1-1/+1
[ Upstream commit 2a601b2d35623065d31ebaf697b07502d54878c9 ] qdisc_sleeping variable is declared as "struct Qdisc __rcu" and as such needs proper annotation while accessing it. Without rtnl_dereference(), the following error is generated by sparse: drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: warning: incorrect type in initializer (different address spaces) drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: expected struct Qdisc *qdisc drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: got struct Qdisc [noderef] __rcu *qdisc_sleeping Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1752675472-201445-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: ag71xx: Add missing check after DMA mapThomas Fourier1-0/+9
[ Upstream commit 96a1e15e60216b52da0e6da5336b6d7f5b0188b0 ] The DMA map functions can fail and should be tested for errors. Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250716095733.37452-3-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 dayset131x: Add missing check after DMA mapThomas Fourier1-0/+36
[ Upstream commit d61f6cb6f6ef3c70d2ccc0d9c85c508cb8017da9 ] The DMA map functions can fail and should be tested for errors. If the mapping fails, unmap and return an error. Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Acked-by: Mark Einon <mark.einon@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250716094733.28734-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysidpf: preserve coalescing settings across resetsAhmed Zaki5-13/+74
[ Upstream commit e1e3fec3e34b4934a9d2c98e4ee00a4d87b19179 ] The IRQ coalescing config currently reside only inside struct idpf_q_vector. However, all idpf_q_vector structs are de-allocated and re-allocated during resets. This leads to user-set coalesce configuration to be lost. Add new fields to struct idpf_vport_user_config_data to save the user settings and re-apply them after reset. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysbe2net: Use correct byte order and format string for TCP seq and ack_seqAlok Tiwari1-4/+4
[ Upstream commit 4701ee5044fb3992f1c910630a9673c2dc600ce5 ] The TCP header fields seq and ack_seq are 32-bit values in network byte order as (__be32). these fields were earlier printed using ntohs(), which converts only 16-bit values and produces incorrect results for 32-bit fields. This patch is changeing the conversion to ntohl(), ensuring correct interpretation of these sequence numbers. Notably, the format specifier is updated from %d to %u to reflect the unsigned nature of these fields. improves the accuracy of debug log messages for TCP sequence and acknowledgment numbers during TX timeouts. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysbnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZEDavid Wei1-3/+9
[ Upstream commit 39f8fcda2088382a4aa70b258d6f7225aa386f11 ] The data page pool always fills the HW rx ring with pages. On arm64 with 64K pages, this will waste _at least_ 32K of memory per entry in the rx ring. Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This makes the data page pool the same as the header pool. Tested with iperf3 with a small (64 entries) rx ring to encourage buffer circulation. Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: stmmac: thead: Get and enable APB clock on initializationYao Zi1-0/+14
[ Upstream commit 4cc339ce482ba78589a2d5cbe1c84b735d263383 ] It's necessary to adjust the MAC TX clock when the linkspeed changes, but it's noted such adjustment always fails on TH1520 SoC, and reading back from APB glue registers that control clock generation results in garbage, causing broken link. With some testing, it's found a clock must be ungated for access to APB glue registers. Without any consumer, the clock is automatically disabled during late kernel startup. Let's get and enable it if it's described in devicetree. For backward compatibility with older devicetrees, probing won't fail if the APB clock isn't found. In this case, we emit a warning since the link will break if the speed changes. Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC") Signed-off-by: Yao Zi <ziyao@disroot.org> Tested-by: Drew Fustini <fustini@kernel.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: ti: icss-iep: Fix incorrect type for return value in extts_enable()Alok Tiwari1-1/+2
[ Upstream commit 5f1d1d14db7dabce9c815e7d7cd351f8d58b8585 ] The variable ret in icss_iep_extts_enable() was incorrectly declared as u32, while the function returns int and may return negative error codes. This will cause sign extension issues and incorrect error propagation. Update ret to be int to fix error handling. This change corrects the declaration to avoid potential type mismatch. Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250805142323.1949406-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: page_pool: allow enabling recycling late, fix false positive warningJakub Kicinski1-1/+8
[ Upstream commit 64fdaa94bfe0cca3a0f4b2dd922486c5f59fe678 ] Page pool can have pages "directly" (locklessly) recycled to it, if the NAPI that owns the page pool is scheduled to run on the same CPU. To make this safe we check that the NAPI is disabled while we destroy the page pool. In most cases NAPI and page pool lifetimes are tied together so this happens naturally. The queue API expects the following order of calls: -> mem_alloc alloc new pp -> stop napi_disable -> start napi_enable -> mem_free free old pp Here we allocate the page pool in ->mem_alloc and free in ->mem_free. But the NAPIs are only stopped between ->stop and ->start. We created page_pool_disable_direct_recycling() to safely shut down the recycling in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't have to worry about recycling any more. Unfortunately, the page_pool_disable_direct_recycling() is not enough to deal with failures which necessitate freeing the _new_ page pool. If we hit a failure in ->mem_alloc or ->stop the new page pool has to be freed while the NAPI is active (assuming driver attaches the page pool to an existing NAPI instance and doesn't reallocate NAPIs). Freeing the new page pool is technically safe because it hasn't been used for any packets, yet, so there can be no recycling. But the check in napi_assert_will_not_race() has no way of knowing that. We could check if page pool is empty but that'd make the check much less likely to trigger during development. Add page_pool_enable_direct_recycling(), pairing with page_pool_disable_direct_recycling(). It will allow us to create the new page pools in "disabled" state and only enable recycling when we know the reconfig operation will not fail. Coincidentally it will also let us re-enable the recycling for the old pool, if the reconfig failed: -> mem_alloc (new) -> stop (old) # disables direct recycling for old -> start (new) # fail!! -> start (old) # go back to old pp but direct recycling is lost :( -> mem_free (new) The new helper is idempotent to make the life easier for drivers, which can operate in HDS mode and support zero-copy Rx. The driver can call the helper twice whether there are two pools or it has multiple references to a single pool. Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue") Tested-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: ti: icssg-prueth: Fix emac link speed handlingMD Danish Anwar1-0/+6
[ Upstream commit 06feac15406f4f66f4c0c6ea60b10d44775d4133 ] When link settings are changed emac->speed is populated by emac_adjust_link(). The link speed and other settings are then written into the DRAM. However if both ports are brought down after this and brought up again or if the operating mode is changed and a firmware reload is needed, the DRAM is cleared by icssg_config(). As a result the link settings are lost. Fix this by calling emac_adjust_link() after icssg_config(). This re populates the settings in the DRAM after a new firmware load. Fixes: 9facce84f406 ("net: ti: icssg-prueth: Fix firmware load sequence.") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Message-ID: <20250805173812.2183161-1-danishanwar@ti.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: hibmcge: fix the np_link_fail error reporting issueJijie Shao1-2/+13
[ Upstream commit 62c50180ffda01468e640ac14925503796f255e2 ] Currently, after modifying device port mode, the np_link_ok state is immediately checked. At this point, the device may not yet ready, leading to the querying of an intermediate state. This patch will poll to check if np_link is ok after modifying device port mode, and only report np_link_fail upon timeout. Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: hibmcge: fix the division by zero issueJijie Shao1-1/+6
[ Upstream commit 7004b26f0b64331143eb0b312e77a357a11427ce ] When the network port is down, the queue is released, and ring->len is 0. In debugfs, hbg_get_queue_used_num() will be called, which may lead to a division by zero issue. This patch adds a check, if ring->len is 0, hbg_get_queue_used_num() directly returns 0. Fixes: 40735e7543f9 ("net: hibmcge: Implement .ndo_start_xmit function") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: hibmcge: fix rtnl deadlock issueJijie Shao1-9/+5
[ Upstream commit c875503a9b9082928d7d3fc60b5400d16fbfae4e ] Currently, the hibmcge netdev acquires the rtnl_lock in pci_error_handlers.reset_prepare() and releases it in pci_error_handlers.reset_done(). However, in the PCI framework: pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked - pci_dev_save_and_disable - err_handler->reset_prepare(dev); In pci_slot_save_and_disable_locked(): list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot!= slot) continue; pci_dev_save_and_disable(dev); if (dev->subordinate) pci_bus_save_and_disable_locked(dev->subordinate); } This will iterate through all devices under the current bus and execute err_handler->reset_prepare(), causing two devices of the hibmcge driver to sequentially request the rtnl_lock, leading to a deadlock. Since the driver now executes netif_device_detach() before the reset process, it will not concurrently with other netdev APIs, so there is no need to hold the rtnl_lock now. Therefore, this patch removes the rtnl_lock during the reset process and adjusts the position of HBG_NIC_STATE_RESETTING to ensure that multiple resets are not executed concurrently. Fixes: 3f5a61f6d504f ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
10 daysnet: dpaa: fix device leak when querying time stamp infoJohan Hovold1-1/+3
commit 3fa840230f534385b34a4f39c8dd313fbe723f05 upstream. Make sure to drop the reference to the ptp device taken by of_find_device_by_node() when querying the time stamping capabilities. Note that holding a reference to the ptp device does not prevent its driver data from going away. Fixes: 17ae0b0ee9db ("dpaa_eth: add the get_ts_info interface for ethtool") Cc: stable@vger.kernel.org # 4.19 Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-2-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysnet: ti: icss-iep: fix device and OF node leaks at probeJohan Hovold1-5/+18
commit e05c54974a05ab19658433545d6ced88d9075cf0 upstream. Make sure to drop the references to the IEP OF node and device taken by of_parse_phandle() and of_find_device_by_node() when looking up IEP devices during probe. Drop the bogus additional reference taken on successful lookup so that the device is released correctly by icss_iep_put(). Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Cc: stable@vger.kernel.org # 6.6 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysnet: mtk_eth_soc: fix device leak at probeJohan Hovold1-1/+0
commit 3e13274ca8750823e8b68181bdf185d238febe0d upstream. The reference count to the WED devices has already been incremented when looking them up using of_find_device_by_node() so drop the bogus additional reference taken during probe. Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Cc: stable@vger.kernel.org # 5.19 Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysnet: enetc: fix device and OF node leak at probeJohan Hovold1-2/+12
commit 70458f8a6b44daf3ad39f0d9b6d1097c8a7780ed upstream. Make sure to drop the references to the IERB OF node and platform device taken by of_parse_phandle() and of_find_device_by_node() during probe. Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block") Cc: stable@vger.kernel.org # 5.13 Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysnet: gianfar: fix device leak when querying time stamp infoJohan Hovold1-1/+3
commit da717540acd34e5056e3fa35791d50f6b3303f55 upstream. Make sure to drop the reference to the ptp device taken by of_find_device_by_node() when querying the time stamping capabilities. Note that holding a reference to the ptp device does not prevent its driver data from going away. Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Cc: stable@vger.kernel.org # 4.18 Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-4-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 daysnet: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnectHeiner Kallweit1-3/+4
commit e88fbc30dda1cb7438515303704ceddb3ade4ecd upstream. After the call to phy_disconnect() netdev->phydev is reset to NULL. So fixed_phy_unregister() would be called with a NULL pointer as argument. Therefore cache the phy_device before this call. Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15net: ti: icssg-prueth: Fix skb handling for XDP_PASSMeghana Malladi1-7/+8
[ Upstream commit d942fe13f72bec92f6c689fbd74c5ec38228c16a ] emac_rx_packet() is a common function for handling traffic for both xdp and non-xdp use cases. Use common logic for handling skb with or without xdp to prevent any incorrect packet processing. This patch fixes ping working with XDP_PASS for icssg driver. Fixes: 62aa3246f4623 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250803180216.3569139-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-30 10:49:27 +0300