summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27net: axienet: increase default TX ring size to 128Robert Hancock1-1/+1
commit 2d19c3fd80178160dd505ccd7fed1643831227a5 upstream. With previous changes to make the driver handle the TX ring size more correctly, the default TX ring size of 64 appears to significantly bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP. Increasing this to 128 seems to bring performance up to near line rate and shouldn't cause excess bufferbloat (this driver doesn't yet support modern byte-based queue management). Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: axienet: fix number of TX ring slots for available checkRobert Hancock1-2/+2
commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream. The check for the number of available TX ring slots was off by 1 since a slot is required for the skb header as well as each fragment. This could result in overwriting a TX ring slot that was still in use. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: axienet: limit minimum TX ring sizeRobert Hancock1-1/+3
commit 70f5817deddbc6ef3faa35841cab83c280cc653a upstream. The driver will not work properly if the TX ring size is set to below MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally fragmented packet in the TX ring. Limit setting the ring size to below this value. Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04net: axienet: Handle deferred probe on clock properlyRobert Hancock1-14/+12
[ Upstream commit 57baf8cc70ea4cf5503c9d42f31f6a86d7f5ff1a ] This driver is set up to use a clock mapping in the device tree if it is present, but still work without one for backward compatibility. However, if getting the clock returns -EPROBE_DEFER, then we need to abort and return that error from our driver initialization so that the probe can be retried later after the clock is set up. Move clock initialization to earlier in the process so we do not waste as much effort if the clock is not yet available. Switch to use devm_clk_get_optional and abort initialization on any error reported. Also enable the clock regardless of whether the controller is using an MDIO bus, as the clock is required in any case. Fixes: 09a0354cadec267be7f ("net: axienet: Use clock framework to get device clock rate") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01net: axienet: Propagate failure of DMA descriptor setupAndre Przywara1-7/+19
[ Upstream commit ee44d0b78839b21591501424fd3cb3648cc803b5 ] When we fail allocating the DMA buffers in axienet_dma_bd_init(), we report this error, but carry on with initialisation nevertheless. This leads to a kernel panic when the driver later wants to send a packet, as it uses uninitialised data structures. Make the axienet_device_reset() routine return an error value, as it contains the DMA buffer initialisation. Make sure we propagate the error up the chain and eventually fail the driver initialisation, to avoid relying on non-initialised buffers. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01net: axienet: Convert DMA error handler to a work queueAndre Przywara1-12/+12
[ Upstream commit 24201a64770afe2e17050b2ab9e8c0e24e9c23b2 ] The DMA error handler routine is currently a tasklet, scheduled to run after the DMA error IRQ was handled. However it needs to take the MDIO mutex, which is not allowed to do in a tasklet. A kernel (with debug options) complains consequently: [ 614.050361] net eth0: DMA Tx error 0x174019 [ 614.064002] net eth0: Current BD is at: 0x8f84aa0ce [ 614.080195] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 [ 614.109484] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 40, name: kworker/u4:4 [ 614.135428] 3 locks held by kworker/u4:4/40: [ 614.149075] #0: ffff000879863328 ((wq_completion)rpciod){....}, at: process_one_work+0x1f0/0x6a8 [ 614.177528] #1: ffff80001251bdf8 ((work_completion)(&task->u.tk_work)){....}, at: process_one_work+0x1f0/0x6a8 [ 614.209033] #2: ffff0008784e0110 (sk_lock-AF_INET-RPC){....}, at: tcp_sendmsg+0x24/0x58 [ 614.235429] CPU: 0 PID: 40 Comm: kworker/u4:4 Not tainted 5.6.0-rc3-00926-g4a165a9d5921 #26 [ 614.260854] Hardware name: ARM Test FPGA (DT) [ 614.274734] Workqueue: rpciod rpc_async_schedule [ 614.289022] Call trace: [ 614.296871] dump_backtrace+0x0/0x1a0 [ 614.308311] show_stack+0x14/0x20 [ 614.318751] dump_stack+0xbc/0x100 [ 614.329403] ___might_sleep+0xf0/0x140 [ 614.341018] __might_sleep+0x4c/0x80 [ 614.352201] __mutex_lock+0x5c/0x8a8 [ 614.363348] mutex_lock_nested+0x1c/0x28 [ 614.375654] axienet_dma_err_handler+0x38/0x388 [ 614.389999] tasklet_action_common.isra.15+0x160/0x1a8 [ 614.405894] tasklet_action+0x24/0x30 [ 614.417297] efi_header_end+0xe0/0x494 [ 614.429020] irq_exit+0xd0/0xd8 [ 614.439047] __handle_domain_irq+0x60/0xb0 [ 614.451877] gic_handle_irq+0xdc/0x2d0 [ 614.463486] el1_irq+0xcc/0x180 [ 614.473451] __tcp_transmit_skb+0x41c/0xb58 [ 614.486513] tcp_write_xmit+0x224/0x10a0 [ 614.498792] __tcp_push_pending_frames+0x38/0xc8 [ 614.513126] tcp_rcv_established+0x41c/0x820 [ 614.526301] tcp_v4_do_rcv+0x8c/0x218 [ 614.537784] __release_sock+0x5c/0x108 [ 614.549466] release_sock+0x34/0xa0 [ 614.560318] tcp_sendmsg+0x40/0x58 [ 614.571053] inet_sendmsg+0x40/0x68 [ 614.582061] sock_sendmsg+0x18/0x30 [ 614.593074] xs_sendpages+0x218/0x328 [ 614.604506] xs_tcp_send_request+0xa0/0x1b8 [ 614.617461] xprt_transmit+0xc8/0x4f0 [ 614.628943] call_transmit+0x8c/0xa0 [ 614.640028] __rpc_execute+0xbc/0x6f8 [ 614.651380] rpc_async_schedule+0x28/0x48 [ 614.663846] process_one_work+0x298/0x6a8 [ 614.676299] worker_thread+0x40/0x490 [ 614.687687] kthread+0x134/0x138 [ 614.697804] ret_from_fork+0x10/0x18 [ 614.717319] xilinx_axienet 7fe00000.ethernet eth0: Link is Down [ 615.748343] xilinx_axienet 7fe00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Since tasklets are not really popular anymore anyway, lets convert this over to a work queue, which can sleep and thus can take the MDIO mutex. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26net: axienet: Fix error return code in axienet_probe()Wei Yongjun1-4/+0
[ Upstream commit eb34e98baf4ce269423948dacefea6747e963b48 ] In the DMA memory resource get failed case, the error is not set and 0 will be returned. Fix it by removing redundant check since devm_ioremap_resource() will handle it. Fixes: 28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-27net: axienet: fix a signedness bug in probeDan Carpenter1-1/+1
The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: axienet: fix a potential double free in axienet_probe()Wen Yang1-1/+0
There is a possible use-after-free issue in the axienet_probe(): 1701: np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); 1702: if (np) { ... 1787: of_node_put(np); ---> released here 1788: lp->eth_irq = platform_get_irq(pdev, 0); 1789: } else { ... 1801: } 1802: if (IS_ERR(lp->dma_regs)) { ... 1805: of_node_put(np); ---> double released here 1806: goto free_netdev; 1807: } We solve this problem by removing the unnecessary of_node_put(). Fixes: 28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Robert Hancock <hancock@sedsystems.ca> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: axienet: move use of resource after validity checkRobert Hancock1-1/+1
We were accessing the pointer returned from platform_get_resource before checking if it was valid, causing an oops if it was not. Move this access after the call to devm_ioremap_resource which does the validity check. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: convert to phylink APIRobert Hancock1-99/+187
Convert this driver to use the phylink API rather than the legacy PHY API. This allows for better support for SFP modules connected using a 1000BaseX or SGMII interface. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: make use of axistream-connected attribute optionalRobert Hancock1-15/+28
Currently the axienet driver requires the use of a second devicetree node, referenced by an axistream-connected attribute on the Ethernet device node, which contains the resources for the AXI DMA block used by the device. This setup is problematic for a use case we have where the Ethernet and DMA cores are behind a PCIe to AXI bridge and the memory resources for the nodes are injected into the platform devices using the multifunction device subsystem - it's not easily possible for the driver to obtain the platform-level resources from the linked device. In order to simplify that usage model, and simplify the overall use of this driver in general, allow for all of the resources to be kept on one node where the resources are retrieved using platform device APIs rather than device-tree-specific ones. The previous usage setup is still supported if the axistream-connected attribute is specified. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: stop interface during shutdownRobert Hancock1-0/+14
On some platforms, such as iMX6 with PCIe devices, crashes or hangs can occur if the axienet device continues to perform DMA transfers after parent devices/busses have been shut down. Shut down the axienet interface during its shutdown callback in order to avoid this. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Make missing MAC address non-fatalRobert Hancock1-2/+3
Failing initialization on a missing MAC address property is excessive. We can just fall back to using a random MAC instead, which at least leaves the interface in a functioning state. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Fix race condition causing TX hangRobert Hancock1-3/+17
It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in axienet_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Add optional support for Ethernet core interruptRobert Hancock1-0/+49
Previously this driver only handled interrupts from the DMA RX and TX blocks, not from the Ethernet core itself. Add optional support for the Ethernet core interrupt, which is used to detect rx_missed and framing errors signalled by the hardware. In order to use this interrupt, a third interrupt needs to be specified in the device tree. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Support shared interruptsRobert Hancock1-6/+8
Specify IRQF_SHARED to support shared interrupts. If the interrupt handler is called and the device is not indicating an interrupt, just return IRQ_NONE rather than spewing error messages. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Add DMA registers to ethtool register dumpRobert Hancock1-1/+9
These registers are important for troubleshooting the state of the DMA cores. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Make RX/TX ring sizes configurableRobert Hancock1-25/+65
Add support for setting the RX and TX ring sizes for this driver using ethtool. Also increase the default RX ring size as the previous default was far too low for good performance in some configurations. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Cleanup DMA device reset and halt processRobert Hancock1-14/+40
The Xilinx DMA blocks each have their own reset register, but they both reset the entire DMA engine, so only one of them needs to be reset. Also, when stopping the device, we need to not just command the DMA blocks to stop, but wait for them to stop, and trigger a device reset to ensure that they are completely stopped. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Re-initialize MDIO registers properly after resetRobert Hancock1-23/+15
The MDIO clock divisor register setting was only applied on the initial startup when the driver was loaded. However, this setting is cleared when the device is reset, such as would occur when the interface was taken down and brought up again, and so the MDIO bus would be non-functional afterwards. Split up the MDIO bus setup and enable into separate functions and re-enable the bus after a device reset, to ensure that the MDIO registers are set properly. This also allows us to remove direct access to MDIO registers in xilinx_axienet_main.c and centralize them all in xilinx_axienet_mdio.c. Also, lock the MDIO bus lock around the device reset process, to avoid MDIO accesses from occurring while the MDIO is disabled during the reset. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: fix teardown order of MDIO busRobert Hancock1-1/+1
Since the MDIO is is brought up before the netdev is registered, it should be torn down after the netdev is removed. Otherwise, PHY accesses can potentially access freed MDIO bus references and cause a crash. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Use clock framework to get device clock rateRobert Hancock1-2/+21
This driver was previously always calculating the MDIO clock divisor (from AXI bus clock to MDIO bus clock) based on the CPU clock frequency, assuming that it is the same as the AXI bus frequency, but that simplistic method only works on the MicroBlaze platform. Add support for specifying the clock used for the device in the device tree using the clock framework. If the clock is specified then it will be used when calculating the clock divisor. The previous CPU clock detection method is left for backward compatibility if no clock is specified. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: fix MDIO bus namingRobert Hancock1-0/+1
The MDIO bus for this driver was being named using the result of of_address_to_resource on a node which may not have any resource on it, but the return value of that call was not checked so it was using some random value in the bus name. Change to name the MDIO bus based on the resource start of the actual Ethernet register block. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Use standard IO accessorsRobert Hancock1-2/+2
This driver was using in_be32 and out_be32 IO accessors which do not exist on most platforms. Also, the use of big-endian accessors does not seem correct as this hardware is accessed over an AXI bus which, to the extent it has an endian-ness, is little-endian. Switch to standard ioread32/iowrite32 accessors. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Fix casting of pointers to u32Robert Hancock1-12/+14
This driver was casting skb pointers to u32 and storing them as such in the DMA buffer descriptor, which is obviously broken on 64-bit. The area of the buffer descriptor being used is not accessed by the hardware and has sufficient room for a 32 or 64-bit pointer, so just store the skb pointer as such. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24net: xilinx: fix possible object reference leakWen Yang1-0/+2
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: xilinx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-6/+6
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-09-20net: xilinx: fix return type of ndo_start_xmit functionYueHaibing1-1/+2
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net: axienet: remove stale comment of axienet_openYueHaibing1-1/+0
axienet_open no longer return -ENODEV when PHY cannot be connected to since commit d7cc3163e026 ("net: axienet: Support phy-less mode of operation") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17net: axienet: add support for standard phy-mode bindingAlvaro G. M1-12/+36
Keep supporting proprietary "xlnx,phy-type" attribute and add support for MII connectivity to the PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net: axienet: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure ndev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: axienet: Utilize of_get_mac_address()Tobias Klauser1-6/+7
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Also avoid casting away the const qualifier of the return value by making axienet_set_mac_address() take a const void* address. Follows commit b34296a9c047 ("net: ethoc: Utilize of_get_mac_address()"). Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson1-3/+4
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: axienet: Remove unused parameter from __axienet_device_resetTobias Klauser1-6/+5
The dev parameter passed to __axienet_device_reset() is not used inside the function, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07net: axienet: Add missing \n to end of dev_err messagesColin Ian King1-2/+2
Trival fix, dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: axienet: constify ethtool_ops structuresJulia Lawall1-1/+1
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21net: axienet: Fix return value check in axienet_probe()Wei Yongjun1-2/+2
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 46aa27df8853 ('net: axienet: Use devm_* calls') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16net: ethernet: xilinx: axienet: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-45/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16net: ethernet: xilinx: axienet: use phydev from struct net_devicePhilippe Reynes1-19/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-1/+1
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera1-1/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10net: axienet: Fix devm_ioremap_resource return value checkKrzysztof Kozlowski1-4/+4
Value returned by devm_ioremap_resource() was checked for non-NULL but devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of error this could lead to dereference of ERR_PTR. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: <stable@vger.kernel.org> Fixes: 46aa27df8853 ("net: axienet: Use devm_* calls") Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06net: axienet: Fix kernel-doc warningsMichal Simek1-14/+24
This patch remove kernel-doc warnings. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06net: axienet: Removed _of_ prefix in probe and remove functionsSrikanth Thokala1-7/+7
Synchronize names with other drivers. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06net: axienet: Use of_property_* callsSrikanth Thokala1-20/+15
Use of_property_* calls Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06net: axienet: Use devm_* callsSrikanth Thokala1-27/+27
use devm_* calls Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-31 06:52:43 +0300