| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit d5a306aedba34e640b11d7026dbbafb78ee3a5f6 ]
In efx_probe_filters, the channel->rps_flow_id is freed in a
efx_for_each_channel marco when success equals to 0.
However, after the following call chain:
ef100_net_open
|-> efx_probe_filters
|-> ef100_net_stop
|-> efx_remove_filters
The channel->rps_flow_id is freed again in the efx_for_each_channel of
efx_remove_filters, triggering a double-free bug.
Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Link: https://lore.kernel.org/r/20231225112915.3544581-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f5020acb33f926030f62563c86dffca35c7b701 ]
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9fc95fe95c3e ("net: fec: correct queue selection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1b355438b8325a486f087e506d412c4e852f37b ]
efx_net_stats() (.ndo_get_stats64) can be called during an ethtool
selftest, during which time nic_data->mc_stats is NULL as the NIC has
been fini'd. In this case do not attempt to fetch the latest stats
from the hardware, else we will crash on a NULL dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000038
RIP efx_nic_update_stats
abridged calltrace:
efx_ef10_update_stats_pf
efx_net_stats
dev_get_stats
dev_seq_printf_stats
Skipping the read is safe, we will simply give out stale stats.
To ensure that the free in efx_ef10_fini_nic() does not race against
efx_ef10_update_stats_pf(), which could cause a TOCTTOU bug, take the
efx->stats_lock in fini_nic (it is already held across update_stats).
Fixes: d3142c193dca ("sfc: refactor EF10 stats handling")
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3319dbb3e755398f254c3daa04b9030197137efe upstream.
ef100_enqueue_skb() generates a valid warning with gcc-13:
drivers/net/ethernet/sfc/ef100_tx.c:370:5: error: conflicting types for 'ef100_enqueue_skb' due to enum/integer mismatch; have 'int(struct efx_tx_queue *, struct sk_buff *)'
drivers/net/ethernet/sfc/ef100_tx.h:25:13: note: previous declaration of 'ef100_enqueue_skb' with type 'netdev_tx_t(struct efx_tx_queue *, struct sk_buff *)'
I.e. the type of the ef100_enqueue_skb()'s return value in the declaration is
int, while the definition spells enum netdev_tx_t. Synchronize them to the
latter.
Cc: Martin Liska <mliska@suse.cz>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114440.10461-1-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 281900a923d4c50df109b52a22ae3cdac150159b ]
The sfc driver does not report QSFP module EEPROM contents correctly
as only the first page is fetched from hardware.
Commit 0e1a2a3e6e7d ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM
length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall
size of the EEPROM info, so use that to report the full EEPROM contents.
Fixes: 9b17010da57a ("sfc: Add ethtool -m support for QSFP modules")
Signed-off-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a80bb8e7233b2ad6ff119646b6e33fb3edcec37b ]
There is a use-after-free scenario that is:
When the NIC is down, user set mac address or vlan tag to VF,
the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop()
and efx_net_open(), since netif_running() is false, the port will not
start and keep port_enabled false, but selftest_work is scheduled
in efx_net_open().
If we remove the device before selftest_work run, the efx_stop_port()
will not be called since the NIC is down, and then efx is freed,
we will soon get a UAF in run_timer_softirq() like this:
[ 1178.907941] ==================================================================
[ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90
[ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0
[ 1178.907950]
[ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022
[ 1178.907955] Call Trace:
[ 1178.907956] <IRQ>
[ 1178.907960] dump_stack+0x71/0xab
[ 1178.907963] print_address_description+0x6b/0x290
[ 1178.907965] ? run_timer_softirq+0xdea/0xe90
[ 1178.907967] kasan_report+0x14a/0x2b0
[ 1178.907968] run_timer_softirq+0xdea/0xe90
[ 1178.907971] ? init_timer_key+0x170/0x170
[ 1178.907973] ? hrtimer_cancel+0x20/0x20
[ 1178.907976] ? sched_clock+0x5/0x10
[ 1178.907978] ? sched_clock_cpu+0x18/0x170
[ 1178.907981] __do_softirq+0x1c8/0x5fa
[ 1178.907985] irq_exit+0x213/0x240
[ 1178.907987] smp_apic_timer_interrupt+0xd0/0x330
[ 1178.907989] apic_timer_interrupt+0xf/0x20
[ 1178.907990] </IRQ>
[ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370
If the NIC is not actually brought up, there is no need to schedule
selftest_work, so let's move invoking efx_selftest_async_start()
into efx_start_all(), and it will be canceled by broughting down.
Fixes: dd40781e3a4e ("sfc: Run event/IRQ self-test asynchronously when interface is brought up")
Fixes: e340be923012 ("sfc: add ndo_set_vf_mac() function for EF10")
Debugged-by: Huang Cun <huangcun@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Suggested-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 813cf9d1e753e1e0a247d3d685212a06141b483e ]
This patch splits the READY state in to NET_UP and NET_DOWN. This
is to prepare for future work to delay resource allocation until
interface up so that we can use resources more efficiently in
SRIOV environments, and also to lay the ground work for an extra
PROBED state where we don't create a network interface,
for VDPA operation.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a80bb8e7233b ("sfc: Fix use-after-free due to selftest_work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca4a80e4bb7e87daf33b27d2ab9e4f5311018a89 ]
At NIC reset, some offload features related to encapsulated traffic
might have changed (this mainly happens if the firmware-variant is
changed with the sfboot userspace tool). Because of this, features are
checked and set again at reset time.
However, this was not done right, and some features were improperly
overwritten at NIC reset:
- Tunneled IPv6 segmentation was always disabled
- Features disabled with ethtool were reenabled
- Features that becomes unsupported after the reset were not disabled
Also, checking if the device supports IPV6_CSUM to enable TSO6 is no
longer necessary because all currently supported devices support it.
Additionally, move the assignment of some other features to the
EF10_OFFLOAD_FEATURES macro, like it is done in ef100, leaving the
selection of features in efx_pci_probe_post_io a bit cleaner.
Fixes: ffffd2454a7a ("sfc: correctly advertise tunneled IPv6 segmentation")
Fixes: 24b2c3751aa3 ("sfc: advertise encapsulated offloads on EF10")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Suggested-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Tested-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230323083417.7345-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffffd2454a7a1bc9f7242b12c4cc0b05c12692b4 ]
Recent sfc NICs are TSO capable for some tunnel protocols. However, it
was not working properly because the feature was not advertised in
hw_enc_features, but in hw_features only.
Setting up a GENEVE tunnel and using iperf3 to send IPv4 and IPv6 traffic
to the tunnel show, with tcpdump, that the IPv4 packets still had ~64k
size but the IPv6 ones had only ~1500 bytes (they had been segmented by
software, not offloaded). With this patch segmentation is offloaded as
expected and the traffic is correctly received at the other end.
Fixes: 24b2c3751aa3 ("sfc: advertise encapsulated offloads on EF10")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230125143513.25841-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aad98abd5cb8133507f22654f56bcb443aaa2d89 ]
The __ef100_hard_start_xmit() returns NETDEV_TX_OK without freeing skb
in error handling case, add dev_kfree_skb_any() to fix it.
Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668671409-10909-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2bf23e4a5af37a4d77901d9ff14c50a269f143d ]
Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.
Fixes: 7c460d9be610 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a8aed7b35becfd21f22a77c7014029ea837b018f ]
Changing a VF's mac address through the VF (rather than via the PF)
fails with EPERM because the latter part of efx_ef10_set_mac_address
attempts to change the vport mac address list as the VF.
Even with this fixed it still fails with EBUSY because the vadaptor
is still assigned on the VF - the vadaptor reassignment must be within
a section where the VF has torn down its state.
A major reason this has broken is because we have two functions that
ostensibly do the same thing - have a PF and VF cooperate to change a
VF mac address. Rather than do this, if we are changing the mac of a VF
that has a link to the PF in the same VM then simply call
sriov_set_vf_mac instead, which is a proven working function that does
that.
If there is no PF available, or that fails non-fatally, then attempt to
change the VF's mac address as we would a PF, without updating the PF's
data.
Test case:
Create a VF:
echo 1 > /sys/class/net/<if>/device/sriov_numvfs
Set the mac address of the VF directly:
ip link set <vf> addr 00:11:22:33:44:55
Set the MAC address of the VF via the PF:
ip link set <pf> vf 0 mac 00:11:22:33:44:66
Without this patch the last command will fail with ENOENT.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC")
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a242eb2913a4aa3d6fbdb86559f27628e9466f3 ]
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f232af4295653afa4ade3230462b3be15ad16419 ]
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
Fixes: c308dfd1b43e ("sfc: fix wrong tx channel offset with efx_separate_tx_channels")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 67c3b611d92fc238c43734878bc3e232ab570c79 ]
Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:
1) The invoked code is always executed with softirqs disabled for non
PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq
handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be
disabled.
Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.
Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ]
When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.
When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
BUG_ON(in_interrupt());
This patch reenables BH to release the buffer.
Log messages when the bug is hit:
kernel BUG at mm/vmalloc.c:2727!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:vunmap+0x2e/0x30
...skip...
Call Trace:
__iommu_dma_free+0x96/0x100
efx_nic_free_buffer+0x2b/0x40 [sfc]
efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
efx_ef10_update_stats_vf+0x18/0x40 [sfc]
efx_start_all+0x15e/0x1d0 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xe7/0x1a0
__dev_change_flags+0x1d7/0x240
dev_change_flags+0x21/0x60
...skip...
Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ]
Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.
Set the pointer to NULL at release time to not trying to read it later.
Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k
allocated by task 6771 on cpu 10 at 3137.860196s:
pci_alloc_dev+0x21/0x60
pci_iov_add_virtfn+0x2a2/0x320
sriov_enable+0x212/0x3e0
efx_ef10_sriov_configure+0x67/0x80 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xba/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
freed by task 6771 on cpu 12 at 3170.991309s:
device_release+0x34/0x90
kobject_cleanup+0x3a/0x130
pci_iov_remove_virtfn+0xd9/0x120
sriov_disable+0x30/0xe0
efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c308dfd1b43ef0d4c3e57b741bb3462eb7a7f4a2 ]
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is
also calculated again in efx_set_channels because it was originally done
there, and when efx_allocate_msix_channels was introduced it was
forgotten to be removed from efx_set_channels.
Moreover, the old calculation is wrong when using
efx_separate_tx_channels because now we can have XDP channels after the
TX channels, so n_channels - n_tx_channels doesn't point to the first TX
channel.
Remove the old calculation from efx_set_channels, and add the
initialization of this variable if MSI or legacy interrupts are used,
next to the initialization of the rest of the related variables, where
it was missing.
Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e102b53f8a778f872dc137f4c7ac548705817aa ]
Normally, all channels have RX and TX queues, but this is not true if
modparam efx_separate_tx_channels=1 is used. In that cases, some
channels only have RX queues and others only TX queues (or more
preciselly, they have them allocated, but not initialized).
Fix efx_channel_has_tx_queues to return the correct value for this case
too.
Messages shown at probe time before the fix:
sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0
------------[ cut here ]------------
netdevice: ens6f0np0: failed to initialise TXQ -1
WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
Call Trace:
efx_init_tx_queue+0xaa/0xf0 [sfc]
efx_start_channels+0x49/0x120 [sfc]
efx_start_all+0x1f8/0x430 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xd0/0x190
__dev_change_flags+0x1b3/0x220
dev_change_flags+0x21/0x60
[...] stripped
Messages shown at remove time before the fix:
sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues
sfc 0000:03:00.0 ens6f0np0: failed to flush queues
Fixes: 8700aff08984 ("sfc: fix channel allocation with brute force")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Tested-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8ff3395fbdf3b79a99d0ef410fc34c51044121e ]
fix warning reported by smatch:
251 drivers/net/ethernet/sfc/ef10.c:2259 efx_ef10_tx_tso_desc()
warn: assigning (-208) to unsigned variable 'ip_tot_len'
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/1649640757-30041-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1fa89ffbc04545b7582518e57f4b63e2a062870f ]
In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().
kmemleak reports:
unreferenced object 0xffff88811ddb0000 (size 63168):
comm "systemd-udevd", pid 265, jiffies 4294681048 (age 348.586s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffffa3767749>] kmalloc_order_trace+0x19/0x120
[<ffffffffa3873f0e>] __kmalloc+0x20e/0x250
[<ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc]
[<ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc]
[<ffffffffa414192c>] local_pci_probe+0xdc/0x170
[<ffffffffa4145df5>] pci_device_probe+0x235/0x680
[<ffffffffa443dd52>] really_probe+0x1c2/0x8f0
[<ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460
[<ffffffffa443e92a>] driver_probe_device+0x4a/0x120
[<ffffffffa443f2ae>] __driver_attach+0x16e/0x320
[<ffffffffa4437a90>] bus_for_each_dev+0x110/0x190
[<ffffffffa443b75e>] bus_add_driver+0x39e/0x560
[<ffffffffa4440b1e>] driver_register+0x18e/0x310
[<ffffffffc02e2055>] 0xffffffffc02e2055
[<ffffffffa3001af3>] do_one_initcall+0xc3/0x450
[<ffffffffa33ca574>] do_init_module+0x1b4/0x700
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Fixes: 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49e6123c65dac6393b04f39ceabf79c44f66b8be ]
It fixes memory leak in ring buffer change logic.
When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
works like below.
1. stop all channels and remove ring buffers.
2. allocates new buffer array.
3. allocates rx buffers.
4. start channels.
While the above steps are working, it skips some steps if the channel
doesn't have a ->copy callback function.
Due to ptp channel doesn't have ->copy callback, these above steps are
skipped for ptp channel.
It eventually makes some problems.
a. ptp channel's ring buffer size is not changed, it works only
1024(default).
b. memory leak.
The reason for memory leak is to use the wrong ring buffer values.
There are some values, which is related to ring buffer size.
a. efx->rxq_entries
- This is global value of rx queue size.
b. rx_queue->ptr_mask
- used for access ring buffer as circular ring.
- roundup_pow_of_two(efx->rxq_entries) - 1
c. rx_queue->max_fill
- efx->rxq_entries - EFX_RXD_HEAD_ROOM
These all values should be based on ring buffer size consistently.
But ptp channel's values are not.
a. efx->rxq_entries
- This is global(for sfc) value, always new ring buffer size.
b. rx_queue->ptr_mask
- This is always 1023(default).
c. rx_queue->max_fill
- This is new ring buffer size - EFX_RXD_HEAD_ROOM.
Let's assume we set 4096 for rx ring buffer,
normal channel ptp channel
efx->rxq_entries 4096 4096
rx_queue->ptr_mask 4095 1023
rx_queue->max_fill 4086 4086
sfc driver allocates rx ring buffers based on these values.
When it allocates ptp channel's ring buffer, 4086 ring buffers are
allocated then, these buffers are attached to the allocated array.
But ptp channel's ring buffer array size is still 1024(default)
and ptr_mask is still 1023 too.
So, 3062 ring buffers will be overwritten to the array.
This is the reason for memory leak.
Test commands:
ethtool -G <interface name> rx 4096
while :
do
ip link set <interface name> up
ip link set <interface name> down
done
In order to avoid this problem, it adds ->copy callback to ptp channel
type.
So that rx_queue->ptr_mask value will be updated correctly.
Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cf765fb00ce083c017f2571ac449cf7912cdb06 ]
Clean the following coccicheck warning:
./drivers/net/ethernet/sfc/efx_channels.c:870:36-37: WARNING opportunity
for swap().
./drivers/net/ethernet/sfc/efx_channels.c:824:36-37: WARNING opportunity
for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 458f5d92df4807e2a7c803ed928369129996bf96 ]
When the page_ring is not used page_ptr_mask is 0.
Do not dereference page_ring[0] in this case.
Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1fb205efb0ccca55626fd4ef38570dd16b44719 ]
seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1d5a474240407c38ca8c7484a656ee39f585399c upstream.
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.
Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9b8bdd1eb5890aeeab7391dddcf8bd51f7b07216 ]
Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.
Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdf1b5c3884f6a0dc91b0dbdb8c3b7d205f449e0 ]
Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.
Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 407ecd1bd726f240123f704620d46e285ff30dd9 ]
The return value of kmalloc() needs to be checked.
To avoid use in efx_nic_update_stats() in case of the failure of alloc.
Fixes: b593b6f1b492 ("sfc_ef100: statistics gathering")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ]
Use pci_info instead to avoid unnamed/uninitialized noise:
[197088.688729] sfc 0000:01:00.0: Solarflare NIC detected
[197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F
[197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed
[197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support
Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before
net_device is registered") from Heiner Kallweit.
Signed-off-by: Erik Ekman <erik@kryo.se>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]
The 1/10GbaseT modes were set up for cards with SFP+ cages in
3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
10GbaseT was likely used since no 10G fibre mode existed.
The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
("net: ethtool: add support for 1000BaseX and missing 10G link modes")
shortly thereafter.
The user guide available at https://support-nic.xilinx.com/wp/drivers
lists support for the following cable and transceiver types in section 2.9:
- QSFP28 100G Direct Attach Cables
- QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
- SFP28 25G Direct Attach Cables
- SFP28 25G SR Optical Transceivers
- QSFP+ 40G Direct Attach Cables
- QSFP+ 40G Active Optical Cables
- QSFP+ 40G SR4 Optical Transceivers
- QSFP+ to SFP+ Breakout Direct Attach Cables
- QSFP+ to SFP+ Breakout Active Optical Cables
- SFP+ 10G Direct Attach Cables
- SFP+ 10G SR Optical Transceivers
- SFP+ 10G LR Optical Transceivers
- SFP 1000BASE‐T Transceivers
- 1G Optical Transceivers
(From user guide issue 28. Issue 16 which also includes older cards like
SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
"Solarflare adapters do not support 10GBASE‐T transceiver modules."
Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
Before:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
After:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Supports Wake-on: g
Wake-on: d
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
Signed-off-by: Erik Ekman <erik@kryo.se>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 041c61488236a5a84789083e3d9f0a51139b6edf upstream.
Everything except the first 32 bits was lost when the pause flags were
added. This makes the 50000baseCR2 mode flag (bit 34) not appear.
I have tested this with a 10G card (SFN5122F-R7) by modifying it to
return a non-legacy link mode (10000baseCR).
Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 788bc000d4c2f25232db19ab3a0add0ba4e27671 ]
Commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with the real
number of initialized queues") intended to fix a problem caused by a
round up when calculating the number of XDP channels and queues.
However, this was not the real problem. The real problem was that the
number of XDP TX queues had been reduced to half in
commit e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues"),
but the variable xdp_tx_queue_count had remained the same.
Once the correct number of XDP TX queues is created again in the
previous patch of this series, this also can be reverted since the error
doesn't actually exist.
Only in the case that there is a bug in the code we can have different
values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this,
and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it
happens again in the future.
Note that the number of allocated queues can be higher than the number
of used ones due to the round up, as explained in the existing comment
in the code. That's why we also have to stop increasing xdp_queue_number
beyond efx->xdp_tx_queue_count.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]
If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.
Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.
In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]
If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.
Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.
2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove
Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.
Example of a log with the error:
list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:47!
[...trimmed...]
RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
[...trimmed...]
Call Trace:
efx_dissociate+0x1f/0x140 [sfc]
efx_pci_remove+0x27/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
pci_stop_bus_device+0x69/0x90
pci_stop_and_remove_bus_device+0xe/0x20
pci_iov_remove_virtfn+0xba/0x120
sriov_disable+0x2f/0xe0
efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
? pcie_aer_is_native+0x12/0x40
efx_ef10_sriov_fini+0x72/0x110 [sfc]
efx_pci_remove+0x62/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
unbind_store+0xf6/0x130
kernfs_fop_write+0x116/0x190
vfs_write+0xa5/0x1a0
ksys_write+0x4f/0xb0
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f03eeb6e0a0a0b8d617ee0a4bce729e47130036 ]
SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.
It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.
Example of (trimmed) trace during module remove without this fix:
remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1'
WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170
...trimmed...
Call Trace:
unregister_irq_proc+0xe3/0x100
free_desc+0x29/0x70
irq_free_descs+0x47/0x70
mp_unmap_irq+0x58/0x60
acpi_unregister_gsi_ioapic+0x2a/0x40
acpi_pci_irq_disable+0x78/0xb0
pci_disable_device+0xd1/0x100
efx_pci_remove+0xa1/0x1e0 [sfc]
pci_device_remove+0x38/0xa0
__device_release_driver+0x177/0x230
driver_detach+0xcb/0x110
bus_remove_driver+0x58/0xd0
pci_unregister_driver+0x2a/0xb0
efx_exit_module+0x24/0xf40 [sfc]
__do_sys_delete_module.constprop.0+0x171/0x280
? exit_to_user_mode_prepare+0x83/0x1d0
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9f9385800b
...trimmed...
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 172e269edfce34bac7c61c15551816bda4b0f140 ]
We're starting from a TXQ label, not a TXQ type, so
efx_channel_get_tx_queue() is inappropriate. This worked by chance,
because labels and types currently match on EF10, but we shouldn't
rely on that.
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 83b09a1807415608b387c7bc748d329fefc5617e upstream.
We're starting from a TXQ label, not a TXQ type, so
efx_channel_get_tx_queue() is inappropriate (and could return NULL,
leading to panics).
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b1faa92289b53cad654123ed2bc8e10f6ddd4ac upstream.
We're starting from a TXQ instance number ('qid'), not a TXQ type, so
efx_get_tx_queue() is inappropriate (and could return NULL, leading
to panics).
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Reported-by: Trevor Hemsley <themsley@voiceflex.com>
Cc: stable@vger.kernel.org
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
efx_probe_filters() has not been called yet when EF100 calls into
efx_mcdi_filter_table_probe(), for which it wants to take the
filter_sem.
Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Link: https://lore.kernel.org/r/24fad43e-887d-051e-25e3-506f23f63abf@solarflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
efx_ef10_try_update_nic_stats_vf() is now only invoked from thread context
and can sleep after efx::stats_lock is dropped.
Change the allocation mode from GFP_ATOMIC to GFP_KERNEL.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
efx_ef10_try_update_nic_stats_vf() used in_interrupt() to figure out
whether it is safe to sleep (for MCDI) or not.
The only caller from which it was not is efx_net_stats(), which can be
invoked under dev_base_lock from net-sysfs::netstat_show().
So add a new update_stats_atomic() method to struct efx_nic_type, and call
it from efx_net_stats(), removing the need for
efx_ef10_try_update_nic_stats_vf() to behave differently for this case
(which it wasn't doing correctly anyway).
For all nic_types other than EF10 VF, this method is NULL so the the
regular update_stats() methods are invoked , which are happy with being
called from atomic contexts.
Fixes: f00bf2305cab ("sfc: don't update stats on VF when called in atomic context")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of the W=1 cleanups for ethernet, a million [*] driver
comments had to be cleaned up to get the W=1 compilation to
succeed. This change finally makes the drivers/net/ethernet tree
compile with W=1 set on the command line. NOTE: The kernel uses
kdoc style (see Documentation/process/kernel-doc.rst) when
documenting code, not doxygen or other styles.
After this patch the x86_64 build has no warnings from W=1, however
scripts/kernel-doc says there are 1545 more warnings in source files, that
I need to develop a script to fix in a followup patch.
The errors fixed here are all kdoc of a few classes, with a few outliers:
In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10:
drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=]
1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff };
| ^~~~~~~~~~~~~~
... repeats 4 times...
drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
2084 | RX_USED_ADD(page, i);
drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’:
drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
603 | u32 tbisr, tanar, tanlpar;
| ^~~~~
drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’:
drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
1207 | u32 cfg, tanar, tbicr;
| ^~~~~
drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
1063 | int data_size, yf_size;
| ^~~~~~~
Normal kdoc fixes:
warning: Function parameter or member 'x' not described in 'y'
warning: Excess function parameter 'x' description in 'y'
warning: Cannot understand <string> on line <NNN> - I thought it was a doc line
[*] - ok it wasn't quite a million, but it felt like it.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kernel-doc script as used by W=1, is confused by the macro
usage inside the header describing the efx_ptp_data struct.
drivers/net/ethernet/sfc/ptp.c:345: warning: Function parameter or member 'MC_CMD_PTP_IN_TRANSMIT_LENMAX' not described in 'efx_ptp_data'
After some discussion on the list, break this patch out to
a separate one, and fix the issue through a creative
macro declaration.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of the W=1 compliation series, these lines all created
warnings about unused variables that were assigned a value. Most
of them are from register reads, but some are just picking up
a return value from a function and never doing anything with it.
Fixed warnings:
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs '
.../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
.../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
.../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable]
.../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable]
.../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable]
.../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
The register reads should be OK, because the current
implementation of readl and friends will always execute even
without an lvalue.
When it makes sense, just remove the lvalue assignment and the
local. Other times, just remove the offending code, and
occasionally, just mark the variable as maybe unused since it
could be used in an ifdef or debug scenario.
Only compile tested with W=1.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This failure path should return a negative error code but it currently
returns success.
Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Necessitates an .ndo_features_check, as the EF10 datapath has several
limitations on what it can handle.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
>From the 8000 series onwards, EF10 NICs with suitable firmware are able
to perform TSO within VXLAN or NVGRE encapsulation.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the tx_queue->handle_tso function pointer, and just use
tx_queue->tso_version to decide which function to call, thus removing
an indirect call from the fast path.
Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired
tx_queue->tso_version before calling it.
In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by
setting tx_queue->tso_version to 0, which will cause the TX path to
use the GSO-based fallback.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
