summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/renesas
AgeCommit message (Collapse)AuthorFilesLines
2022-05-16ravb: Add support for RZ/V2MPhil Edworthy1-0/+26
RZ/V2M Ethernet is very similar to R-Car Gen3 Ethernet-AVB, though some small parts are the same as R-Car Gen2. Other differences to R-Car Gen3 and Gen2 are: * It has separate data (DI), error (Line 1) and management (Line 2) irqs rather than one irq for all three. * Instead of using the High-speed peripheral bus clock for gPTP, it has a separate gPTP reference clock. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Use separate clock for gPTPPhil Edworthy2-3/+21
RZ/V2M has a separate gPTP reference clock that is used when the AVB-DMAC Mode Register (CCC) gPTP Clock Select (CSEL) bits are set to "01: High-speed peripheral bus clock". Therefore, add a feature that allows this clock to be used for gPTP. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Support separate Line0 (Desc), Line1 (Err) and Line2 (Mgmt) irqsPhil Edworthy2-6/+53
R-Car has a combined interrupt line, ch22 = Line0_DiA | Line1_A | Line2_A. RZ/V2M has separate interrupt lines for each of these, so add a feature that allows the driver to get these interrupts and call the common handler. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ravb: Separate handling of irq enable/disable regs into featurePhil Edworthy3-5/+7
Currently, when the HW has a single interrupt, the driver uses the GIC, TIC, RIC0 registers to enable and disable interrupts. When the HW has multiple interrupts, it uses the GIE, GID, TIE, TID, RIE0, RID0 registers. However, other devices, e.g. RZ/V2M, have multiple irqs and only have the GIC, TIC, RIC0 registers. Therefore, split this into a separate feature. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21ravb: Use GFP_KERNEL instead of GFP_ATOMIC when possibleChristophe JAILLET1-1/+1
'max_rx_len' can be up to GBETH_RX_BUFF_MAX (i.e. 8192) (see 'gbeth_hw_info'). The default value of 'num_rx_ring' can be BE_RX_RING_SIZE (i.e. 1024). So this loop can allocate 8 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01sh_eth: kill useless initializers in sh_eth_{suspend|resume}()Sergey Shtylyov1-2/+2
sh_eth_{suspend|resume}() initialize their local variable 'ret' to 0 but this value is never really used, thus we can kill those intializers... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/f09d7c64-4a2b-6973-09a4-10d759ed0df4@omp.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31sh_eth: sh_eth_close() always returns 0Sergey Shtylyov1-3/+1
sh_eth_close() always returns 0, hence the check in sh_eth_wol_restore() is pointless (however we cannot change the prototype of sh_eth_close() as it implements the driver's ndo_stop() method). Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-31ravb: ravb_close() always returns 0Sergey Shtylyov1-4/+1
ravb_close() always returns 0, hence the check in ravb_wol_restore() is pointless (however, we cannot change the prototype of ravb_close() as it implements the driver's ndo_stop() method). Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-31phy: make phy_set_max_speed() *void*Sergey Shtylyov2-15/+3
After following the call tree of phy_set_max_speed(), it became clear that this function never returns anything but 0, so we can change its result type to *void* and drop the result checks from the three drivers that actually bothered to do it... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-4/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-10sh_eth: Use dev_err_probe() helperGeert Uytterhoeven1-2/+1
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/2576cc15bdbb5be636640f491bcc087a334e2c02.1638959463.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen2-4/+12
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-20ethernet: renesas: Use div64_ul instead of do_divYang Li1-4/+2
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Eliminate the following coccicheck warning: ./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-19ethernet: renesas: use eth_hw_addr_set()Jakub Kicinski2-14/+18
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Break the address up into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-13ravb: Fix typo AVB->DMACBiju Das1-1/+1
Fix the typo AVB->DMAC in comment, as the code following the comment is for DMAC on Gigabit Ethernet IP. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Update ravb_emac_init_gbeth()Biju Das2-2/+9
This patch enables Receive/Transmit port of TOE and removes the setting of promiscuous bit from EMAC configuration mode register. This patch also update EMAC configuration mode comment from "PAUSE prohibition" to "EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC Pass Through". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Document PFRI register bitBiju Das1-1/+1
Document PFRI register bit, as it is documented on R-Car Gen3 and RZ/G2L hardware manuals. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Rename "nc_queue" feature bitBiju Das2-19/+19
Rename the feature bit "nc_queue" with "nc_queues" as AVB DMAC has RX and TX NC queues. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Optimize ravb_emac_init_gbeth functionBiju Das1-2/+1
Optimize CXR31 register initialization on ravb_emac_init_gbeth function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Rename "tsrq" variableBiju Das2-5/+5
Rename the variable "tsrq" with "tccr_mask" as we are passing TCCR mask to the ravb_wait() function. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add support to retrieve stats for GbEthernetBiju Das1-0/+21
Add support for retrieving stats information for GbEthernet. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add carrier_counters to struct ravb_hw_infoBiju Das2-0/+11
RZ/G2L E-MAC supports carrier counters. Add a carrier_counter hw feature bit to struct ravb_hw_info to add this feature only for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_gbeth() stubBiju Das2-5/+142
Fillup ravb_rx_gbeth() function to support RZ/G2L. This patch also renames ravb_rcar_rx to ravb_rx_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_ring_format_gbeth() stubBiju Das2-4/+31
Fillup ravb_rx_ring_format_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_format to ravb_rx_ring_format_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_ring_free_gbeth() stubBiju Das1-4/+24
Fillup ravb_rx_ring_free_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_free to ravb_rx_ring_free_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_alloc_rx_desc_gbeth() stubBiju Das2-7/+24
Fillup ravb_alloc_rx_desc_gbeth() function to support RZ/G2L. This patch also renames ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add rx_max_buf_size to struct ravb_hw_infoBiju Das2-1/+5
R-Car AVB-DMAC has maximum 2K size on RX buffer, whereas on RZ/G2L it is 8K. We need to allow for changing the MTU within the limit of the maximum size of a descriptor. Add a rx_max_buf_size variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Use ALIGN macro for max_rx_lenBiju Das1-1/+1
Use ALIGN macro for calculating the value for max_rx_len. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Initialize GbEthernet E-MACBiju Das2-13/+62
Initialize GbEthernet E-MAC found on RZ/G2L SoC. This patch also renames ravb_set_rate to ravb_set_rate_rcar and ravb_rcar_emac_init to ravb_emac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add half_duplex to struct ravb_hw_infoBiju Das2-8/+31
RZ/G2L supports half duplex mode. Add a half_duplex hw feature bit to struct ravb_hw_info for supporting half duplex mode for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add magic_pkt to struct ravb_hw_infoBiju Das2-1/+5
E-MAC on R-Car supports magic packet detection, whereas RZ/G2L does not support this feature. Add magic_pkt to struct ravb_hw_info and enable this feature only for R-Car. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add tsrq to struct ravb_hw_infoBiju Das2-2/+8
R-Car AVB-DMAC has 4 Transmit start request queues, whereas RZ/G2L has only 1 Transmit start request queue. Add a tsrq variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Exclude gPTP feature support for RZ/G2LBiju Das1-36/+49
R-Car supports gPTP feature whereas RZ/G2L does not support it. This patch excludes gtp feature support for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Initialize GbEthernet DMACBiju Das2-2/+31
Initialize GbEthernet DMAC found on RZ/G2L SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add support for RZ/G2L SoCBiju Das2-0/+64
RZ/G2L SoC has Gigabit Ethernet IP consisting of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). This patch adds compatible string for RZ/G2L and fills up the ravb_hw_info struct. Function stubs are added which will be used by gbeth_hw_info and will be filled incrementally. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add nc_queue to struct ravb_hw_infoBiju Das2-49/+94
R-Car supports network control queue whereas RZ/G2L does not support it. Add nc_queue to struct ravb_hw_info, so that NC queue is handled only by R-Car. This patch also renames ravb_rcar_dmac_init to ravb_dmac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Rename "no_ptp_cfg_active" and "ptp_cfg_active" variablesBiju Das2-15/+15
Rename the variable "no_ptp_cfg_active" with "gptp" and "ptp_cfg_active" with "ccc_gac" to match the HW features. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar"Biju Das2-6/+6
Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" and replace the function pointer "set_rx_csum_feature" with "set_feature". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07net: renesas: sh_eth: Fix freeing wrong tx descriptorYoshihiro Shimoda1-0/+1
The cur_tx counter must be incremented after TACT bit of txdesc->status was set. However, a CPU is possible to reorder instructions and/or memory accesses between cur_tx and txdesc->status. And then, if TX interrupt happened at such a timing, the sh_eth_tx_free() may free the descriptor wrongly. So, add wmb() before cur_tx++. Otherwise NETDEV WATCHDOG timeout is possible to happen. Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Add reset supportBiju Das2-0/+12
Reset support is present on R-Car. Let's support it, if it is available. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_emac_init functionBiju Das2-2/+13
The E-MAC IP on the R-Car AVB module has different initialization parameters for RX frame size, duplex settings, different offset for transfer speed setting and has magic packet detection support compared to E-MAC on RZ/G2L Gigabit Ethernet module. Factorise the ravb_emac_init function to support the later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_dmac_init functionBiju Das2-21/+32
The DMAC IP on the R-Car AVB module has different initialization parameters for RCR, TGC, TCCR, RIC0, RIC2, and TIC compared to DMAC IP on the RZ/G2L Gigabit Ethernet module. Factorise the ravb_dmac_init function to support the later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_set_featuresBiju Das2-2/+14
RZ/G2L supports HW checksum on RX and TX whereas R-Car supports on RX. Factorise ravb_set_features to support this feature. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_adjust_link functionBiju Das2-1/+5
R-Car supports 100 and 1000 Mbps transfer speed whereas RZ/G2L in addition support 10Mbps. Factorise ravb_adjust_link function in order to support 10Mbps speed. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_rx functionBiju Das2-2/+13
R-Car uses an extended descriptor in RX whereas, RZ/G2L uses normal descriptor in RX. Factorise the ravb_rx function to support the later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_ring_init functionBiju Das2-5/+17
The ravb_ring_init function uses an extended descriptor in RX for R-Car and normal descriptor for RZ/G2L. Add a helper function for RX ring buffer allocation to support later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_ring_format functionBiju Das2-12/+24
The ravb_ring_format function uses an extended descriptor in RX for R-Car compared to the normal descriptor for RZ/G2L. Factorise RX ring buffer buildup to extend the support for later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_ring_free functionBiju Das2-17/+31
R-Car uses extended descriptor in RX, whereas RZ/G2L uses normal descriptor. Factorise ravb_ring_free function so that it can support later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-09 10:45:50 +0300