summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/renesas/ravb_main.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-20ravb: do not write 1 to reserved bitsKazuya Mizuguchi1-5/+6
[ Upstream commit 2fe397a3959de8a472f165e6d152f64cb77fa2cc ] EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ravb: fix invalid context bug while changing link options by ethtoolVladimir Zapolskiy1-34/+15
[ Upstream commit 05925e52a7d379192a5fdff2c33710f573190ead ] The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in ravb_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ravb: fix invalid context bug while calling auto-negotiation by ethtoolVladimir Zapolskiy1-6/+1
[ Upstream commit 0973a4dd79fe56a3beecfcff675ba4c01df0b0c1 ] Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-10ravb: Remove Rx overflow log messagesKazuya Mizuguchi1-6/+2
[ Upstream commit 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 ] Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05ravb: Fix use-after-free on `ifconfig eth0 down`Eugeniu Rosca1-12/+12
[ Upstream commit 79514ef670e9e575a1fe36922268c439d0f0ca8a ] Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17ravb: unmap descriptors when freeing ringsKazuya Mizuguchi1-48/+64
[ Upstream commit a47b70ea86bdeb3091341f5ae3ef580f1a1ad822 ] "swiotlb buffer is full" errors occur after repeated initialisation of a device - f.e. suspend/resume or ip link set up/down. This is because memory mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit() is not released. Resolve this problem by unmapping descriptors when freeing rings. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04ravb: do not use zero-length alignment DMA descriptorMasaru Nagai1-0/+13
[ Upstream commit 8ec3e8a192ba6f13be4522ee81227c792c86fb1a ] Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02net: renesas: ravb: unintialized return valueDan Carpenter1-2/+0
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: renesas: ravb: fix fixed-link phydev leaksJohan Hovold1-3/+14
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on initialisation errors and on device close after having disconnected the PHY. Fixes: b4bc88a868ed ("ravb: Add fixed-link support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31ravb: avoid unused function warningsArnd Bergmann1-10/+4
When CONFIG_PM_SLEEP is disabled, we get a couple of harmless warnings: drivers/net/ethernet/renesas/ravb_main.c:2117:12: error: 'ravb_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/renesas/ravb_main.c:2104:12: error: 'ravb_suspend' defined but not used [-Werror=unused-function] The simplest solution here is to replace the #ifdef with __maybe_unused annotations, which lets the compiler do the right thing by itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support") Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21net: ethernet: renesas: ravb: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-7/+9
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21net: ethernet: renesas: ravb: use phydev from struct net_devicePhilippe Reynes1-17/+12
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11ravb: use proper names for suspend/resume functionsNiklas Söderlund1-3/+3
The patch 'ravb: add sleep PM suspend/resume support' used incorrect function names containing 'runtime' for the suspend and resume functions. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10ravb: add sleep PM suspend/resume supportNiklas Söderlund1-8/+64
The interface would not function after the system had been woken up after have been suspended (echo mem > /sys/power/state) cycle. The reason for this is that all device registers have been reset to its default values. This patch adds sleep suspend and resume functions that detached the interface at suspend and restore the registers and reattach the interface at resume. Only the registers that are only configured at probe time needs to be explicitly restored by the resume handler. All other registers are reconfigured by either reopening the device in the resume handler (if the device was running when the system was suspended) or when the interface is opened by a user at a later time. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-02ethernet: renesas: ravb_main: add missing of_node_put after calling ↵Peter Chen1-0/+1
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20ravb: fix DMA channel misreportingSergei Shtylyov1-1/+0
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02ravb: Remove manual pause frame transmitMasaru Nagai1-2/+0
Writing a non-zero value to the manual PAUSE frame register (MPR) starts the transmission of a PAUSE frame. A PAUSE frame is sent in ravb_emac_init(), but it is not expected behavior. Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02ravb: Add SET_RUNTIME_PM_OPS macroKazuya Mizuguchi1-2/+1
Use SET_RUNTIME_PM_OPS macro instead of assigning a member of dev_pm_ops directly. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02ravb: Add ESF in RCR for enabling separation filterMasaru Nagai1-1/+2
The H/W manual recommends B'10 or B'11 in a value of the separation filtering select bits in the receive configuration register (RCR.ESF). When B'10 is set, frames from non-matching streams are discarded. When B'11 is set, frames from non-matching streams are processed in reception queue 0 (best effort). This patch sets B'11 in ESF. [ykaneko0929@gmail.com: revised this commit message] Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17ravb: Add missing free_irq() calls to ravb_close()Geert Uytterhoeven1-1/+6
When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch0:rx_be) vs. 00000000 (ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch0:rx_be IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release any of the R-Car Gen3-specific secondary IRQs. Add the missing free_irq() calls to fix this. Fixes: f51bdc236b6c5835 ("ravb: Add dma queue interrupt support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ravb: Add missing free_irq() call to ravb_close()Geert Uytterhoeven1-0/+2
When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac) ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release the R-Car Gen3-specific secondary IRQ. Add the missing free_irq() call to fix this. Fixes: 22d4df8ff3a3cc72 ("ravb: Add support for r8a7795 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ravb: Remove rx buffer ALIGNKazuya Mizuguchi1-6/+4
Aligning the reception data size is not required. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14ravb: make ravb_ptp_interrupt() *void*Sergei Shtylyov1-2/+6
When we have the ISS.CGIS bit set, we already know that gPTP interrupt has happened, so an extra GIS register check at the end of ravb_ptp_interrupt() seems superfluous. We can model the gPTP interrupt handler like all other dedicated interrupt handlers in the driver and make it *void*. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14net: ethernet: renesas: ravb_main: test clock rate to avoid division by 0Wolfram Sang1-0/+3
The clk API may return 0 on clk_get_rate, so we should check the result before using it as a divisor. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04ravb: Add dma queue interrupt supportKazuya Mizuguchi1-45/+221
This patch supports the following interrupts. - One interrupt for multiple (timestamp, error, gPTP) - One interrupt for emac - Four interrupts for dma queue (best effort rx/tx, network control rx/tx) This patch improve efficiency of the interrupt handler by adding the interrupt handler corresponding to each interrupt source described above. Additionally, it reduces the number of times of the access to EthernetAVB IF. Also this patch prevent this driver depends on the whim of a boot loader. [ykaneko0929@gmail.com: define bit names of registers] [ykaneko0929@gmail.com: add comment for gen3 only registers] [ykaneko0929@gmail.com: fix coding style] [ykaneko0929@gmail.com: update changelog] [ykaneko0929@gmail.com: gen3: fix initialization of interrupts] [ykaneko0929@gmail.com: gen3: fix clearing interrupts] [ykaneko0929@gmail.com: gen3: add helper function for request_irq()] [ykaneko0929@gmail.com: gen3: remove IRQF_SHARED flag for request_irq()] [ykaneko0929@gmail.com: revert ravb_close() and ravb_ptp_stop()] [ykaneko0929@gmail.com: avoid calling free_irq() to non-hooked interrupts] [ykaneko0929@gmail.com: make NC/BE interrupt handler a function] [ykaneko0929@gmail.com: make timestamp interrupt handler a function] [ykaneko0929@gmail.com: timestamp interrupt is handled in multiple interrupt handler instead of dma queue interrupt handler] Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28ravb: fix software timestampingLino Sanfilippo1-1/+1
In ravb_start_xmit dont call skb_tx_timestamp only when hardware timestamping is requested: in the latter case software timestamps are suppressed and thus the call of skb_tx_timestamp does not have any effect. Instead call skb_tx_timestamp unconditionally in ravb_start_xmit, since the function checks itself if software timestamping is required or should be skipped due to hardware timestamping. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-19ravb: fix result value overwriteYoshihiro Kaneko1-2/+2
The result value is overwritten by a return value of ravb_ptp_interrupt(). Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+1
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-04net: ethernet: renesas: ravb_main: don't open code of_device_get_match_data()Wolfram Sang1-3/+1
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+8
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17ravb: kill useless *switch* defaultsSergei Shtylyov1-2/+0
The driver has the *default* case doing nothing in the *switch* statement with an integer expression -- remove it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ravb: skip gPTP start/stop on R-Car gen3Sergei Shtylyov1-4/+8
When adding support for the R-Car gen3 gPTP active in configuration mode, some call sites of ravb_ptp_{init|stop}() were missed due to an oversight. Add checks for the R-Car gen2 SoCs around these... Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ravb: kill duplicate setting of CCC.CSELSergei Shtylyov1-4/+0
When adding support for the R-Car gen3 gPTP active in configuration mode, the code setting the CCC.CSEL field was duplicated due to an oversight. For R-Car gen 2 it's just redundant and for R-Car gen3 the write at this time is probably ignored due to CCC.GAC bit being already set... Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-10ravb: factor out register bit twiddling codeSergei Shtylyov1-41/+27
The driver has often repeated pattern of reading a register, AND'ing and/or OR'ing some bits and writing the value back. Factor the pattern out into ravb_modify() -- this saves 260 bytes of code with ARM gcc 4.7.3. While at it, update Cogent Embedded's copyrights. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+2
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12ravb: stop reading ECMR in ravb_emac_init()Sergei Shtylyov1-5/+2
The code in ravb_emac_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'priv->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn1-2/+1
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn1-1/+1
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+4
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ravb: Add fixed-link supportKazuya Mizuguchi1-0/+12
This patch adds support of the fixed PHY. This patch is based on commit 87009814cdbb ("ucc_geth: use the new fixed PHY helpers"). Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ravb: Add disable 10baseKazuya Mizuguchi1-0/+3
Ethernet AVB does not support 10 Mbps transfer speed. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14ravb: clear RIC1 in init instead of stopKazuya Mizuguchi1-2/+3
AVB-DMAC Receive FIFO Warning interrupt is not enabled, so it is not necessary to disable the interrupt in ravb_close(). On the other hand, this patch disables the interrupt in ravb_dmac_init() to prevent the possibility that the interrupt is issued by the state that a boot loader left. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06ravb: read MAC address registers only onceSergei Shtylyov1-6/+9
The code reading the MAHR/MALR registers in ravb_read_mac_address() is terribly ineffective -- it reads MAHR 4 times and MALR 2 times, while it's enough to read each register only once. Use the local variables to achieve that, somewhat beautifying the code while at it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-06ravb: fix RX queue #1 frame error counter nameSergei Shtylyov1-1/+1
The Rx queue #1 frame error counter name contains trailing underscore, probably due to a typo... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+4
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ravb: add fallback compatibility stringsSimon Horman1-0/+2
Add fallback compatibility strings for R-Car Gen 2 & 3 SoC Families. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ravb: ptp: Add CONFIG mode supportKazuya Mizuguchi1-5/+28
This patch makes PTP support active in CONFIG mode on R-Car Gen3. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20ravb: use clock rate as basis for GTI.TIVSimon Horman1-1/+37
The GTI.TIV may be set to 2GHz^2 / rate, where rate is that of the clock of the device. Rather than assuming a rate of 130MHz use the actual rate of the clock. The motivation for this is to use the correct rate on the r8a7795/Salvator-X which is advertised as 133MHz but may differ depending on the extal present on the Salvator-X. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-30 05:28:34 +0300