| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When r8169 is built-in but LED support is a loadable module, the new
code to drive the LED causes a link failure:
ld: drivers/net/ethernet/realtek/r8169_leds.o: in function `rtl8168_init_leds':
r8169_leds.c:(.text+0x36c): undefined reference to `devm_led_classdev_register_ext'
LED support is an optional feature, so fix this issue by adding a Kconfig
symbol R8169_LEDS that is guaranteed to be false if r8169 is built-in
and LED core support is a module. As a positive side effect of this change
r8169_leds.o no longer is built under this configuration.
Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312281159.9TPeXbNd-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Tested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/d055aeb5-fe5c-4ccf-987f-5af93a17537b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for the LED's on most chip versions. Excluded are
the old non-PCIe versions and RTL8125. RTL8125 has a different LED
register layout, support for it will follow later.
LED's can be controlled from userspace using the netdev LED trigger.
Tested on RTL8168h.
Note: The driver can't know which LED's are actually physically
wired. Therefore not every LED device may represent a physically
available LED.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/stmicro/stmmac/dwmac5.c
drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/hwif.h
37e4b8df27bc ("net: stmmac: fix FPE events losing")
c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/
Adjacent changes:
net/ipv4/tcp_ao.c
9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk")
7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When FIFO reaches near full state, device will issue pause frame.
If pause slot is enabled(set to 1), in this time, device will issue
pause frame only once. But if pause slot is disabled(set to 0), device
will keep sending pause frames until FIFO reaches near empty state.
When pause slot is disabled, if there is no one to handle receive
packets, device FIFO will reach near full state and keep sending
pause frames. That will impact entire local area network.
This issue can be reproduced in Chromebox (not Chromebook) in
developer mode running a test image (and v5.10 kernel):
1) ping -f $CHROMEBOX (from workstation on same local network)
2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX
3) ping $ROUTER (wait until ping fails from workstation)
Takes about ~20-30 seconds after step 2 for the local network to
stop working.
Fix this issue by enabling pause slot to only send pause frame once
when FIFO reaches near full state.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we know that the task is going to be a no-op, don't even schedule it.
And remove the check for netif_running() in the worker function, the
check for flag RTL_FLAG_TASK_ENABLED is sufficient. Note that we can't
remove the check for flag RTL_FLAG_TASK_ENABLED in the worker function
because we have no guarantee when it will be executed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/c65873a3-7394-4107-99a7-83f20030779c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once upon a time, when r8169 was new, the multicast filter limit code
was copied from RTL8139 driver. There the filter limit is even
user-configurable.
The filtering is hash-based and we don't have perfect filtering.
Actually the mc filtering on RTL8125 still seems to be the same
as used on 8390/NE2000. So it's not clear to me which benefit it
should bring when switching to all-multi mode once a certain number
of filter bits is set. More the opposite: Filtering out at least
some unwanted mc traffic is better than no filtering.
Also the available chip documentation doesn't mention any restriction.
Therefore remove the filter limit.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/57076c05-3730-40d1-ab9a-5334b263e41a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ndo_stop() is RTNL-protected by net core, and the worker function takes
RTNL as well. Therefore we will deadlock when trying to execute a
pending work synchronously. To fix this execute any pending work
asynchronously. This will do no harm because netif_running() is false
in ndo_stop(), and therefore the work function is effectively a no-op.
However we have to ensure that no task is running or pending after
rtl_remove_one(), therefore add a call to cancel_work_sync().
Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The original change results in a deadlock if jumbo mtu mode is used.
Reason is that the phydev lock is held when rtl_reset_work() is called
here, and rtl_jumbo_config() calls phy_start_aneg() which also tries
to acquire the phydev lock. Fix this by calling rtl_reset_work()
asynchronously.
Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125")
Reported-by: Ian Chen <free122448@hotmail.com>
Tested-by: Ian Chen <free122448@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This check can never be true for a firmware file with a correct format.
Existing checks in rtl_fw_data_ok() are sufficient, no problems with
invalid firmware files are known.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
c9663f79cd82 ("ice: adjust switchdev rebuild path")
7758017911a4 ("ice: restore timestamp configuration after device reset")
https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/
Adjacent changes:
kernel/bpf/verifier.c
bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations")
5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df.
I couldn't reproduce the reported issue. What I did, based on a pcap
packet log provided by the reporter:
- Used same chip version (RTL8168h)
- Set MAC address to the one used on the reporters system
- Replayed the EAPOL unicast packet that, according to the reporter,
was filtered out by the mc filter.
The packet was properly received.
Therefore the root cause of the reported issue seems to be somewhere
else. Disabling mc filtering completely for the most common chip
version is a quite big hammer. Therefore revert the change and wait
for further analysis results from the reporter.
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mirsad proposed a patch to reduce the number of spinlock lock/unlock
operations and the function code size. This can be further improved
because the function sets a consecutive register block.
Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.
Fixes: b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.
This patch also prepares for "fix network lost after resume on DASH
systems".
Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit
AcceptMulticast if IFF_MULTICAST isn't set.
Note: Based on the implementations I've seen it doesn't seem to be 100% clear
what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST
is not. This patch is based on the understanding that IFF_MULTICAST has
precedence.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RTL8168H and RTL8107E ethernet adapters erroneously filter unicast
eapol packets unless allmulti is enabled. These devices correspond to
RTL_GIGA_MAC_VER_46 and VER_48. Add an exception for VER_46 and VER_48
in the same way that VER_35 has an exception.
Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Patrick Thompson <ptf@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231030205031.177855-1-ptf@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KCSAN reported the following data-race bug:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x80003fff -> 0x3402805f
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
drivers/net/ethernet/realtek/r8169_main.c:
==========================================
4429
→ 4430 status = le32_to_cpu(desc->opts1);
4431 if (status & DescOwn)
4432 break;
4433
4434 /* This barrier is needed to keep us from reading
4435 * any other fields out of the Rx descriptor until
4436 * we know the status of DescOwn
4437 */
4438 dma_rmb();
4439
4440 if (unlikely(status & RxRES)) {
4441 if (net_ratelimit())
4442 netdev_warn(dev, "Rx ERROR. status = %08x\n",
Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:
4429
→ 4430 status = le32_to_cpu(READ_ONCE(desc->opts1));
4431 if (status & DescOwn)
4432 break;
4433
As the consequence of this fix, this KCSAN warning was eliminated.
Fixes: 6202806e7c03a ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TxDescArray[entry].opts1
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0xb0000042 -> 0x00000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The read side is in
drivers/net/ethernet/realtek/r8169_main.c
=========================================
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
→ 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes
this KCSAN warning.
4366
→ 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
4368 if (status & DescOwn)
4369 break;
4370
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KCSAN reported the following data-race:
==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]
write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)
value changed: 0x002f4815 -> 0x002f4816
Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================
The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
4251 /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
4252 smp_wmb();
4253
→ 4254 WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
4255
4256 stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
4257 R8169_TX_STOP_THRS,
4258 R8169_TX_START_THRS);
The read side is the function rtl_tx():
4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
4356 int budget)
4357 {
4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
4359 struct sk_buff *skb;
4360
4361 dirty_tx = tp->dirty_tx;
4362
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
4364 unsigned int entry = dirty_tx % NUM_TX_DESC;
4365 u32 status;
4366
4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
4368 if (status & DescOwn)
4369 break;
4370
4371 skb = tp->tx_skb[entry].skb;
4372 rtl8169_unmap_tx_skb(tp, entry);
4373
4374 if (skb) {
4375 pkts_compl++;
4376 bytes_compl += skb->len;
4377 napi_consume_skb(skb, budget);
4378 }
4379 dirty_tx++;
4380 }
4381
4382 if (tp->dirty_tx != dirty_tx) {
4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
4384 WRITE_ONCE(tp->dirty_tx, dirty_tx);
4385
4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
4387 rtl_tx_slots_avail(tp),
4388 R8169_TX_START_THRS);
4389 /*
4390 * 8168 hack: TxPoll requests are lost when the Tx packets are
4391 * too close. Let's kick an extra TxPoll request when a burst
4392 * of start_xmit activity is detected (if it is not detected,
4393 * it is slow enough). -- FR
4394 * If skb is NULL then we come here again once a tx irq is
4395 * triggered after the last fragment is marked transmitted.
4396 */
→ 4397 if (tp->cur_tx != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
4399 }
4400 }
Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:
4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) {
but the same solution is required for protecting the other access to tp->cur_tx:
→ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
4398 rtl8169_doorbell(tp);
The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.
The fix eliminated the KCSAN data-race report for this bug.
It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.
Fixes: 94d8a98e6235c ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Martin Kjær Jørgensen <me@lagy.org>
Link: https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9edde757-9c3b-4730-be3b-0ef3a374ff71@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RTL8168h
This effectively reverts 4b5f82f6aaef. On a number of systems ASPM L1
causes tx timeouts with RTL8168h, see referenced bug report.
Fixes: 4b5f82f6aaef ("r8169: enable ASPM L1/L1.1 from RTL8168h")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217814
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit e1ed3e4d91112027b90c7ee61479141b3f948e6a.
Turned out the change causes a performance regression.
Link: https://lore.kernel.org/netdev/20230713124914.GA12924@green245/T/
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/055c6bc2-74fa-8c67-9897-3f658abb5ae7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
is disabled during NAPI poll")
There have been reports that on a number of systems this change breaks
network connectivity. Therefore effectively revert it. Mainly affected
seem to be systems where BIOS denies ASPM access to OS.
Due to later changes we can't do a direct revert.
Fixes: 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/e47bac0d-e802-65e1-b311-6acb26d5cf10@freenet.de/T/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217596
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/57f13ec0-b216-d5d8-363d-5b05528ec5fb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit missed that for chip versions 42 and 43 ASPM
remained disabled in the respective rtl_hw_start_...() routines.
This resulted in problems as described in the referenced bug
ticket. Therefore re-instantiate the previous logic.
Fixes: 5fc3f6c90cca ("r8169: consolidate disabling ASPM before EPHY access")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In addition to properly handling probe deferrals dev_err_probe()
conveniently combines printing an error message with returning
the errno. So let's use it for every error path in rtl_init_one()
to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/f0596a19-d517-e301-b649-304f9247b75a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check whether first PCI read returns 0xffffffff. Currently, if this is
the case, the user sees the following misleading message:
unknown chip XID fcf, contact r8169 maintainers (see MAINTAINERS file)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/75b54d23-fefe-2bf4-7e80-c9d3bc91af11@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver's interrupt service routine is requested with the
IRQF_NO_THREAD if MSI is available. This means that the routine is
invoked in hardirq context even on PREEMPT_RT. The routine itself is
relatively short and schedules a worker, performs register access and
schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in
waking ksoftirqd for further processing so using NAPI threads with this
driver is highly recommended since it NULL routes the threaded-IRQ
efforts.
Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on
PREEMPT_RT because the function uses spinlock_t locks which become
sleeping locks on PREEMPT_RT. The locks are only used to protect
register access and don't nest into other functions or locks. They are
also not used for unbounded period of time. Therefore it looks okay to
convert them to raw_spinlock_t.
Convert the three locks which are used from the interrupt service
routine to raw_spinlock_t.
Fixes: e1ed3e4d9111 ("r8169: disable ASPM during NAPI poll")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use new net core macro netif_subqueue_completed_wake to simplify
the code of the tx cleanup path.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use new net core macro netif_subqueue_maybe_stop in the start_xmit path
to simplify the code. Whilst at it, set the tx queue start threshold to
twice the stop threshold. Before values were the same, resulting in
stopping/starting the queue more often than needed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When link speed is 10 Mbps and temperature is under -20°C, RTL8168H and
RTL8107E may have rx crc error. Disable phy 10 Mbps pll off to fix this
issue.
Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that rtl_hw_aspm_clkreq_enable() is a no-op for chip versions < 32,
we can consolidate disabling ASPM before EPHY access in rtl_hw_start().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that ASPM is disabled during NAPI poll, we can remove all ASPM
restrictions. This allows for higher power savings if the network
isn't fully loaded.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several chip versions have problems with ASPM, what may result in
rx_missed errors or tx timeouts. The root cause isn't known but
experience shows that disabling ASPM during NAPI poll can avoid
these problems.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bail out if the function is used with chip versions that don't support
ASPM configuration. In addition remove the delay, it tuned out that
it's not needed, also vendor driver r8125 doesn't have it.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For disabling ASPM during NAPI poll we'll have to unlock access
to the config registers in atomic context. Other code parts
running with config register access unlocked are partially
longer and can sleep. Add a usage counter to enable parallel
execution of code parts requiring unlocked config registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For disabling ASPM during NAPI poll we'll have to access both registers
in atomic context. Use a spinlock to protect access.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For disabling ASPM during NAPI poll we'll have to access mac ocp
registers in atomic context. This could result in races because
a mac ocp read consists of a write to register OCPDR, followed
by a read from the same register. Therefore add a spinlock to
protect access to mac ocp registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ASPM issues may result in the NIC not being accessible any longer.
In this case disabling ASPM may not work. Therefore detect this case
by checking whether register reads return ~0, and try to make the
NIC accessible again by resetting the secondary bus.
v2:
- add exception handling for the case that pci_reset_bus() fails
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/usb/r8152.c
be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit")
ec51fbd1b8a2 ("r8152: add USB device driver for config selection")
https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are still single reports of systems where ASPM incompatibilities
cause tx timeouts. It's not clear whom to blame, so let's disable
ASPM in case of a tx timeout.
v2:
- add one-time warning for informing the user
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/92369a92-dc32-4529-0509-11459ba0e391@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59.
This chip version seems to be very rare, but it exits in consumer
devices, see linked report.
Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install
Fixes: 42666b2c452c ("r8169: disable detection of chip version 36")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When close device, if wol is enabled, rx will be enabled. When open
device it will cause rx packet to be dma to the wrong memory address
after pci_set_master() and system log will show blow messages.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr
ffdd4000 [fault reason 05] PTE Write access is not set
In this patch, driver disable tx/rx when close device. If wol is
enabled, only enable rx filter and disable rxdv_gate(if support) to
let hardware only receive packet to fifo but not to dma it.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are reports about r8169 not reaching full line speed on certain
systems (e.g. SBC's) with a 2.5Gbps link.
There was a time when hardware interrupt coalescing was enabled per
default, but this was changed due to ASPM-related issues on few systems.
So let's use software interrupt coalescing instead and enable it
using new function netdev_sw_irq_coalesce_default_on().
Even with these conservative settings interrupt load on my 1Gbps test
system reduced significantly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The open code is defined as a helper function(tp_to_dev) on r8169_main.c,
which the open code is &tp->pci_dev->dev. The helper function was added
in commit 1e1205b7d3e9 ("r8169: add helper tp_to_dev"). And then later,
commit f1e911d5d0df ("r8169: add basic phylib support") added
r8169_phylink_handler function but it didn't use the helper function.
Thus, tp_to_dev() replaces the open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20221129161244.5356-1-claudiajkang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
