summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)AuthorFilesLines
2017-06-05qed*: L2 interface to use the SB structures directlyMintz, Yuval5-30/+51
Part of an effort of a cleaner seperation between qed and the protocol drivers, the L2 interface is to use the SB structure for initialization purposes opaquely. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05qed: Create L2 queue databaseMintz, Yuval6-3/+133
First step in allowing a single PF/VF to open multiple queues on the same queue zone is to add per-hwfn database of queue-cids as a two-dimensional array where entry would be according to [queue zone][internal index]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05qed: Add bitmaps for VF CIDsMintz, Yuval2-74/+202
Each PF has a bitmap for its own ranges of CIDs, to allow easy grabbing of an available CID when such is needed. But VFs are not using the same mechanism, instead relying on hard-coded CIDs [ queue-index == cid ]. As an infrastructure step toward increasing number of CIDs of VFs, the PF is going to maintain bitmaps for the VF CIDs as well - the bitmaps would be per-VF and the ranges would be the same [in HW all VFs of a given PF have the same mapping of CIDs, and the HW is capable of distinguishing between those according to the VF index] Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05netxen: remove writeq/readq function definitionsLABBE Corentin1-14/+1
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qlcnic: Fix tunnel offload for 82xx adaptersChopra, Manish4-2/+30
Qlogic's 82xx series adapter doesn't support tunnel offloads, driver incorrectly assumes that it is supported and causes firmware hang while running tunnel IO. This patch fixes this by not advertising tunnel offloads for 82xx adapters. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Add support for changing iSCSI macMintz, Yuval2-0/+67
Enhance API between qedi and qed, allowing qedi to inform device's firmware when the iSCSI mac is to be changed. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Support NVM-image reading APIMintz, Yuval3-0/+126
Storage drivers require images from the nvram in boot-from-SAN scenarios. This provides the necessary API between qed and the protocol drivers to perform such reads. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Share additional information with qedfMintz, Yuval3-1/+23
Share several new tidbits with qedf: - wwpn & wwnn - Absolute pf-id [this one is actually meant for qedi as well] - Number of available CQs While we're at it, now that qedf will be aware of the available CQs we can add some validation on the inputs it provides. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Correct order of wwnn and wwpnMintz, Yuval1-4/+4
Driver reads values via HSI splitting this 8-byte into 2 32-bit values and builds a single u64 field - but it does so by shifting the lower field instead of the higher. Luckily, we still don't use these fields for anything - but we're about to start. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: No need to reset SBs on IOV initMintz, Yuval3-33/+4
Since we're resetting the IGU CAM each time we initialize the PF device, there's no need to reset the VF SBs again when initializing IOV. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Reset IGU CAM to default on initMintz, Yuval3-20/+162
The IGU CAM contains an assocaition between hardware SBs and interrupt lines, and it can be dynamically configured to allow more interrupts in one entity over another, specifically for Re-distibution of SBs between a PF and its child VFs. While we don't yet use this functionality, there are other clients that do and as such its possible the information passed from management firmware during initialization in regard to the possible number of SBs doesn't accurately reflect the current HW configuration. The following changes are going to apply to the driver init sequence: a. PF is going to re-configure all entries belonging to itself and its child VFs in IGU CAM based on the management firmware info regarding the number of SBs that are supposed to exist there. b. PF is going to stop using the SB resource [management firmware provided information] for anything but the initialization. Instead, it would use the live-time counters it maintains for the numbers. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Hold a single array for SBsMintz, Yuval8-27/+103
A PF today holds 2 different arrays - one holding information about the HW configuration and one holding information about the SBs that are used by the protocol drivers. These arrays aren't really connected - e.g., protocol driver initializing a given SB would not mark the same SB as occupied in the HW shadow array. Move into a single array [at least for PFs] - hold the mapping of the driver-protocol SBs on the HW entry which they configure. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Provide auxiliary for getting free VF SBMintz, Yuval3-29/+51
IOV code is very intrusive in its manipulation of the status block database. Add a new auxiliary function to allow the PF to find an available unused status block to configure for a specific VF's MSI-x vector. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Remove assumption on SB order in IGUMintz, Yuval2-61/+33
Current code assumes there's a known layout for SBs in the IGU, where all the SBs of a single entity would be laid in consecutive order of vectors. While the assumption is still kept by management firmware, we already have the necessary information to eliminate it, so no reason to keep it in code. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Encapsulate interrupt counters in structMintz, Yuval5-24/+21
We already have an API struct that contains interrupt-related numbers. Use it to encapsulate all information relating to the status of SBs as (used|free). Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Add aux. function translating sb_id -> igu_sb_idMintz, Yuval1-10/+21
An additional step for relaxing the IGU order assumption, we now add an auxiliary function that can be used for finding the HW status block that's associated with a given MSI-x vector. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Distinguish between sb_id and igu_sb_idMintz, Yuval3-25/+30
In qed code, sb_id means 2 different things: - An interrupt vector [usually when received as a parameter from a protocol driver, but not only] that's associated with a status block. - An index to a status block entity existing in HW. This patch renames the references to the HW entity, adding an 'igu_' prefix to allow an easier distinction. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: IGU read revisedMintz, Yuval4-140/+83
As a first step for relaxing various assumptions done by driver about the IGU mapping, the driver is now going to read the entire IGU into a shadow copy, and mark in its database each status block that's relevant for it. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Minor refactoring in interrupt codeMintz, Yuval1-3/+12
Separate the portions controlling interrupt enablement form those controlling the ability of HW to generate attentions. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qed: Make qed_int_cau_conf_pi() staticMintz, Yuval2-52/+34
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and ↵Jia-Ju Bai1-1/+1
qlcnic_82xx_hw_read_wx_2M The driver may sleep under a write spin lock, and the function call path is: qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range To fix it, the usleep_range is replaced with udelay. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Don't log missing periodic stats by defaultMintz, Yuval1-1/+2
Current implementation lacks the logic for providing management firmware with RDMA-related statistics; [much] worse than that - it logs such events by default to system logs. Since the statistics' gathering is done periodically, using sufficiently new management firmware the system logs would get filled with these unnecessary prints. For now, reduce the verbosity of the log so that it would not be logged by default. Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Cache alignemnt padding to match hostMintz, Yuval2-2/+14
Improve PCI performance by adjusting padding sizes to match those of the host machine's cacheline. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Mask parities after occuranceMintz, Yuval1-13/+23
Parities might exhibit a flood behavior since we re-enable the attention line without preventing the parity from re-triggering the assertion. Mask the source in AEU until the parity would be handled. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Print multi-bit attentions properlyMintz, Yuval1-5/+33
In strucuture reflecting the AEU hw block some entries represent multiple HW bits, and the associated name is in fact a pattern. Today, whenever such an attention would be asserted the resulted prints would show the pattern string instead of indicating which of the possible bits was set. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Diffrentiate adapter-specific attentionsMintz, Yuval1-11/+69
There are 4 attention bits in AEU that have different meaning for QL45xxx and QL41xxx adapters. Instead of doing a massive infrastructure change in favor of these bits, we implement a point fix where only those four would change meaning dependent on the adapter involved. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Get rid of the attention-arraysMintz, Yuval3-1287/+312
We have almost all the necessary information regarding attentions in the logic employed for taking register dumps. Add some more and get rid of the seperate implementation we have today for identifying & printing various attention sources. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Support dynamic s-tag changeMintz, Yuval5-1/+64
In case management firmware indicates a change in the used S-tag, propagate the configuration to HW and FW. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: QL41xxx VF MSI-x tableMintz, Yuval3-4/+66
The QL41xxx adapters' PCI allows a single configuration for the MSI-x table size of all child VFs of a given PF. The existing code wouldn't cause the management firmware to set that value, meaning the VFs would retain the default MSI-x table size. Introduce a new scheme so that whenever a VF is enabled, driver would set the number of MSI-x to be the maximum over the various VFs' needs. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Don't inherit RoCE DCBx for V2Sudarsana Reddy Kalluru1-11/+0
Older firmware used by device didn't distinguish between RoCE and RoCE V2 from DCBx configuration perspective, and as a result we've used to take a the RoCE-related configuration and apply to it for both. Since we now support configuring each its own values, there's no reason to reflect [& configure] that both are using the same. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Correct DCBx update schemeSudarsana Reddy Kalluru2-9/+10
Instead of using a boolean value that propagates to FW configuration, use the proper firmware HSI values. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Add missing static/local dcbx infoSudarsana Reddy Kalluru1-1/+3
Some getters are not getting filled with the correct information regarding local DCBx. Fixes: 49632b5822ea ("qed: Add support for static dcbx.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Replace set_id() api with set_name()Mintz, Yuval3-9/+5
Current API between qed and protocol modules allows passing an additional private string - but it doesn't get utilized by qed anywhere. Clarify the API by removing it and renaming it 'set_name'. CC: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qede: Log probe of PCI deviceMintz, Yuval1-2/+38
Replace meaningless logged print ('Ending successfully qede probe') with a single-liner containing interesting information about probed device. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Provide MBI information in dev_infoTomer Tayar4-0/+51
Pass additional information about package installed on persistent memory so that protocol drivers would be able to log it. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Enable RoCE parser searching on fp initMichal Kalderon1-0/+7
Since we're closing the parser searching for RDMA when stoping the fastpath, we need to re-enable it when starting the fastpath once again. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Flush slowpath tasklet on stopTomer Tayar1-0/+14
Today, driver has a synchronization point while closing the device which synchronizes its slowpath interrupt line. However, that's insufficient as that ISR would schedule the slowpath-tasklet - so even after ISR is over it's possible the handling of the interrupt has not completed. By doing a disable/enable on the taskelt we guarantee that all HW events that should no longer be genereated from that point onward in the flow are truly behind us. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Remove BB_A0 referencesMintz, Yuval2-12/+0
A0 never went public, so no need to protect against it. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Drop the 's' from num_ports_in_enginesTomer Tayar4-22/+22
The parameter reflects the number of physical ports connected to a single engine, not all. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Log incorrectly installed boardTomer Tayar2-0/+7
In case nvram layout of board is incorrect, board may exhibit peculiar oddities. Log such a rare event. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: !main_ptt for tunnel configurationManish Chopra5-9/+30
Flows configuring tunnel ports in HW use the main_ptt which should be reserved for core-functionality. Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qede: Fix sparse warningsManish Chopra4-18/+22
Solves the following warning in qede - - Several cases of missing cpu_to_le16() conversions - Adds 'static' to one function declaration - Removes dcbnl operation that's currently getting populated twice Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: ethernet: update drivers to handle HWTSTAMP_FILTER_NTP_ALLMiroslav Lichvar1-0/+1
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Support 1G advertisment.Sudarsana Reddy Kalluru1-0/+8
Some variants of adapters support the 1G speed capability. Need to allow the configuration of 1G speed if adapter supports it. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Fix setting of Management bitfieldsTomer Tayar1-1/+1
The management firmware HSI contains masks which are already shifted to their right place, so QED_MFW_SET_FIELD() is clearing incorrect fields by shifting the mask by the offset. Luckily, today we set the fields in an incrementing order [so we're not erasing any previously set fields], but this still needs fixing. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: qedr closure after setting stateMintz, Yuval1-1/+2
This is benign, but it makes more sense to start the close sequence only after changing the internal state [in case it would once care]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Correct print in iscsi error-flowMintz, Yuval1-1/+1
If too many CQs are requested, qed would print the available number as if it's a resource and not a feature leading to the wrong print. Fixes: 08737a3fa30a ("qed: Inform qedi the number of possible CQs") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Revise alloc/setup/free flowTomer Tayar15-177/+177
Re-organize the logic that allocates and frees memory of various sub-components of the hw-function - a. No need to pass pointers to said structure as parameters; The internal logic knows exactly where to find/set the data. b. Nullify pointers after cleanup to prevent possible errors to re-entrant code. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Don't use an internal MAC fieldMintz, Yuval3-28/+38
Driver maintains its primary MAC in a private field which gets updated when ndo_dev_set_mac() gets called. However, there are flows where the primary MAC of the device can change without said NDO being called [bond device in TLB mode configuring slaves' addresses], resulting in a configuration where there's a mismatch between what's apparent to user [the netdevice's value] and what's configured in the HW [the private value]. As we don't have any real motivation of maintaining this private field, simply remove it and start using the netdevice's field instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Add missing Status-block freeSudarsana Reddy Kalluru1-4/+7
When destroying the datapath channels, qede doesn't notify qed of the released status blocks which were acquired during the initialization. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-18 23:50:49 +0300