summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qede
AgeCommit message (Collapse)AuthorFilesLines
2016-04-14qede: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru3-10/+283
Adds support for the following via ethtool: - UDP configuration of RSS based on 2-tuple/4-tuple. - RSS hash key. - RSS indirection table. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed*: remove version dependencyRahul Verma2-12/+1
Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by: Rahul Verma <rahul.verma@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11qede: Fix net-next "make ARCH=x86_64"Manish Chopra1-1/+4
'commit 55482edc25f0606851de42e73618f813f310d009 ("qede: Add slowpath/fastpath support and enable hardware GRO")' introduces below error when compiling net-next with "make ARCH=x86_64" drivers/built-in.o: In function `qede_rx_int': qede_main.c:(.text+0x6101a0): undefined reference to `tcp_gro_complete' Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07qede: Add slowpath/fastpath support and enable hardware GROManish Chopra2-1/+388
This patch configures hardware to use GRO and adds support for fastpath APIs to handle HW aggregated packets. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07qed/qede: Add infrastructure support for hardware GROManish Chopra1-7/+10
This patch adds mainly structures and APIs prototype changes in order to give support for qede slowpath/fastpath support for the same. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qed, qede: rebrand module descriptionYuval Mintz1-3/+3
Drop the `QL4xxx 40G/100G' and use `FastLinQ 4xxxx' instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qede: Don't report link change needlesslyYuval Mintz1-6/+10
There are several corner cases where driver might get a 2nd notification about the same link change. Don't log any additional changes if the physical carrier is already reported as it should. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qede: Linearize SKBs when neededYuval Mintz1-5/+33
There's a corner-case in HW where an SKB queued for transmission that contains too many frags will cause FW to assert. This patch solves this by linearizing the SKB if necessary. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qede: Change pci DID for 10g deviceYuval Mintz1-1/+1
The device ID for the 10g module has changed. Populate the pci_ids table accordingly. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-22qed,qede: Bump driver versions to 8.7.0.0Yuval Mintz1-1/+1
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19qede: Add vlan filtering offload supportSudarsana Reddy Kalluru2-1/+286
Device would start receiving only vlan-tagged traffic with tags matching that of one of the configured vlan IDs, unless: - Device is expliicly placed in PROMISC mode. - Device exhausts its vlan filter credits. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18qed/qede: use 8.7.3.0 FW.Yuval Mintz3-93/+185
This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for {get, set}_pauseparamSudarsana Kalluru1-0/+60
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for nway_resetSudarsana Kalluru1-0/+25
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for set_phys_idSudarsana Kalluru1-0/+29
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for {get, set}_ringparamSudarsana Kalluru2-2/+46
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for {get, set}_channelsSudarsana Kalluru3-2/+59
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add basic ethtool supportSudarsana Kalluru4-2/+596
This adds basic ethtool operations to the qed driver, allowing support in: - Statistics gathering [ethtool -S] - Setting of debug level [ethtool -s <interface> msglvl] - Getting basic information [ethtool, ethtool -i] In addition it adds the ability to change the MTU. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add support for linkSudarsana Kalluru1-0/+47
This adds basic link functionality to qede - driver still doesn't provide users with an API to change any link property, but it does request qed to initialize the link using default configuration, and registers a callback that allows it to get link notifications. This patch adds the ability of the driver to set the carrier as active and to enable traffic as a result of async. link notifications. Following this patch, driver should be capable of running traffic. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: classification configurationSudarsana Kalluru2-0/+251
Add the ability to configure basic classification in driver by implementing ndo_set_mac_address() and ndo_set_rx_mode(). Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add basic network device supportYuval Mintz2-0/+1935
This patch includes the basic Rx/Tx support for the driver [although carrier will still never be turned on]. Following this patch the driver registers a network device, initializes it and prepares it for traffic. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add basic Network driverYuval Mintz3-0/+430
The Qlogic Everest Driver for Ethernet is the Ethernet specific module for QL4xxx ethernet products by Qlogic. This patch adds a very minimal PCI driver, one that doesn't yet register a network device, but one that does interact with qed and does a basic initialization of the HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 20:15:33 +0300