summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qede
AgeCommit message (Collapse)AuthorFilesLines
2022-04-15qede: confirm skb is allocated before usingJamie Bainbridge1-0/+3
[ Upstream commit 4e910dbe36508654a896d5735b318c0b88172570 ] qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb(). Fixes: 8a8633978b842 ("qede: Add build_skb() support.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14qede: validate non LSO skb lengthManish Chopra1-0/+7
commit 8e227b198a55859bf790dc7f4b1e30c0859c6756 upstream. Although it is unlikely that stack could transmit a non LSO skb with length > MTU, however in some cases or environment such occurrences actually resulted into firmware asserts due to packet length being greater than the max supported by the device (~9700B). This patch adds the safeguard for such odd cases to avoid firmware asserts. v2: Added "Fixes" tag with one of the initial driver commit which enabled the TX traffic actually (as this was probably day1 issue which was discovered recently by some customer environment) Fixes: a2ec6172d29c ("qede: Add support for link") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22qede: Fix memset corruptionShai Malin1-1/+1
[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ] Thanks to Kees Cook who detected the problem of memset that starting from not the first member, but sized for the whole struct. The better change will be to remove the redundant memset and to clear only the msix_cnt member. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12qede: fix offload for IPIP tunnel packetsManish Chopra1-0/+5
[ Upstream commit 5d5647dad259bb416fd5d3d87012760386d97530 ] IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22net: qed*: Reduce RX and TX default ring count when running inside kdump kernelBhupesh Sharma2-2/+11
[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ] Normally kdump kernel(s) run under severe memory constraint with the basic idea being to save the crashdump vmcore reliably when the primary kernel panics/hangs. Currently the qed* ethernet driver ends up consuming a lot of memory in the kdump kernel, leading to kdump kernel panic when one tries to save the vmcore via ssh/nfs (thus utilizing the services of the underlying qed* network interfaces). An example OOM message log seen in the kdump kernel can be seen here [1], with crashkernel size reservation of 512M. Using tools like memstrack (see [2]), we can track the modules taking up the bulk of memory in the kdump kernel and organize the memory usage output as per 'highest allocator first'. An example log for the OOM case indicates that the qed* modules end up allocating approximately 216M memory, which is a large part of the total crashkernel size: dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages) This patch reduces the default RX and TX ring count from 1024 to 64 when running inside kdump kernel, which leads to a significant memory saving. An example log with the patch applied shows the reduced memory allocation in the kdump kernel: dracut-pre-pivot[674]: ======== Report format module_summary: ======== dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages) <..snip..> [dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages) Tested crashdump vmcore save via ssh/nfs protocol using underlying qed* network interface after applying this patch. [1] OOM log: ------------ kworker/0:6: page allocation failure: order:6, mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) kworker/0:6 cpuset=/ mems_allowed=0 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025 01/18/2019 Workqueue: events work_for_cpu_fn Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x30 dump_stack+0x90/0xb4 warn_alloc+0xf4/0x178 __alloc_pages_nodemask+0xcac/0xd58 alloc_pages_current+0x8c/0xf8 kmalloc_order_trace+0x38/0x108 qed_iov_alloc+0x40/0x248 [qed] qed_resc_alloc+0x224/0x518 [qed] qed_slowpath_start+0x254/0x928 [qed] __qede_probe+0xf8/0x5e0 [qede] qede_probe+0x68/0xd8 [qede] local_pci_probe+0x44/0xa8 work_for_cpu_fn+0x20/0x30 process_one_work+0x1ac/0x3e8 worker_thread+0x44/0x448 kthread+0x130/0x138 ret_from_fork+0x10/0x18 Cannot start slowpath qede: probe of 0000:05:00.1 failed with error -12 [2]. Memstrack tool: https://github.com/ryncsn/memstrack Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra <manishc@marvell.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05qede: Fix race between rdma destroy workqueue and link change eventMichal Kalderon2-1/+30
[ Upstream commit af6565adb02d3129d3fae4d9d5da945abaf4417a ] If an event is added while the rdma workqueue is being destroyed it could lead to several races, list corruption, null pointer dereference during queue_work or init_queue. This fixes the race between the two flows which can occur during shutdown. A kref object and a completion object are added to the rdma_dev structure, these are initialized before the workqueue is created. The refcnt is used to indicate work is being added to the workqueue and ensures the cleanup flow won't start while we're in the middle of adding the event. Once the work is added, the refcnt is decreased and the cleanup flow is safe to run. Fixes: cee9fbd8e2e ("qede: Add qedr framework") Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31qede: Fix multicast mac configurationManish Chopra1-1/+1
[ Upstream commit 0af67e49b018e7280a4227bfe7b6005bc9d3e442 ] Driver doesn't accommodate the configuration for max number of multicast mac addresses, in such particular case it leaves the device with improper/invalid multicast configuration state, causing connectivity issues (in lacp bonding like scenarios). Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31qede: Disable hardware gro when xdp prog is installedManish Chopra1-2/+2
[ Upstream commit 4c8dc00503db24deaf0b89dddfa84b7cba7cd4ce ] commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced a regression in driver that when xdp program is installed on qede device, device's aggregation feature (hardware GRO) is not getting disabled, which is unexpected with xdp. Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12qede: fix NULL pointer deref in __qede_remove()Manish Chopra1-2/+10
[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ] While rebooting the system with SR-IOV vfs enabled leads to below crash due to recurrence of __qede_remove() on the VF devices (first from .shutdown() flow of the VF itself and another from PF's .shutdown() flow executing pci_disable_sriov()) This patch adds a safeguard in __qede_remove() flow to fix this, so that driver doesn't attempt to remove "already removed" devices. [ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc [ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.360304] PGD 0 [ 194.360325] Oops: 0000 [#1] SMP [ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200 [ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables] [ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1 [ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019 [ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000 [ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282 [ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000 [ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098 [ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000 [ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000 [ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000 [ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000 [ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0 [ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 194.362051] PKRU: 55555554 [ 194.362073] Call Trace: [ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede] [ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0 [ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0 [ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30 [ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0 [ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20 [ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160 [ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0 [ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30 [ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed] [ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed] [ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed] [ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede] [ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede] [ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60 [ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0 [ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40 [ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60 [ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260 [ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0 [ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580 [ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0 [ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10 [ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a [ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0 [ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.363764] RSP <ffff9ceabebdfac0> [ 194.363791] CR2: 00000000000008dc Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16qede: fix write to free'd pointer error and double free of ptpColin Ian King1-4/+3
[ Upstream commit 1dc2b3d65523780ed1972d446c76e62e13f3e8f5 ] The err2 error return path calls qede_ptp_disable that cleans up on an error and frees ptp. After this, the free'd ptp is dereferenced when ptp->clock is set to NULL and the code falls-through to error path err1 that frees ptp again. Fix this by calling qede_ptp_disable and exiting via an error return path that does not set ptp->clock or kfree ptp. Addresses-Coverity: ("Write to pointer after free") Fixes: 035744975aec ("qede: Add support for PTP resource locking.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-14qede: Fix system crash on configuring channels.Sudarsana Reddy Kalluru3-0/+19
[ Upstream commit 0aa4febb420d91df5b56b1864a2465765da85f4b ] Under heavy traffic load, when changing number of channels via ethtool (ethtool -L) which will cause interface to be reloaded, it was observed that some packets gets transmitted on old TX channel/queue id which doesn't really exist after the channel configuration leads to system crash. Add a safeguard in the driver by validating queue id through ndo_select_queue() which is called before the ndo_start_xmit(). Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-21net_sched: remove list_head from tc_actionCong Wang1-4/+2
After commit 90b73b77d08e, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11qed/qede: qede_setup_tc() can be statickbuild test robot1-1/+1
Fixes: 5e7baf0fcb2a ("qed/qede: Multi CoS support.") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qede: Ingress tc flower offload (drop action) support.Manish Chopra4-11/+362
The main motive of this patch is to lay down driver's tc offload infrastructure in place. With these changes tc can offload various supported flow profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop action. Dropped flows statistic is a global counter for all the offloaded flows for drop action and is populated in ethtool statistics as common "gft_filter_drop". Examples - tc qdisc add dev p4p1 ingress tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto udp src_ip 192.168.40.100 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \ src_port 453 dst_port 876 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_port 98 action drop Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qede: Add destination ip based flow profile.Manish Chopra1-48/+66
This patch adds support for dropping and redirecting the flows based on destination IP in the packet. This also moves the profile mode settings in their own functions which can be used through tc flows in successive patch. For example - ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.40.100 action -1 ethtool -N p5p1 flow-type udp4 dst-ip 192.168.50.100 action 1 ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.60.100 action 0x100000000 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qed/qede: Multi CoS support.Manish Chopra4-44/+185
This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08qede: qede_fp: Mark expected switch fall-throughGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1384501 ("Missing break in switch") Addresses-Coverity-ID: 1398869 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20qede: Add driver callbacks for eeprom module query.Sudarsana Reddy Kalluru1-0/+88
This patch implements the ethtool callbacks for querying sfp/eeprom module. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13xdp: don't make drivers report attachment modeJakub Kicinski1-1/+0
prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-02qede: Adverstise software timestamp caps when PHC is not available.Sudarsana Reddy Kalluru1-2/+8
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-13treewide: Use array_size() in vzalloc()Kees Cook1-2/+3
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31qed*: Add link change count value to ethtool statistics display.Sudarsana Reddy Kalluru3-0/+4
This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qed*: Support drop action classificationManish Chopra4-0/+17
With this patch, User can configure for the supported flows to be dropped. Added a stat "gft_filter_drop" as well to be populated in ethtool for the dropped flows. For example - ethtool -N p5p1 flow-type udp4 dst-port 8000 action -1 ethtool -N p5p1 flow-type tcp4 scr-ip 192.168.8.1 action -1 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qede: Support flow classification to the VFs.Manish Chopra1-4/+30
With the supported classification modes [4 tuples based, udp port based, src-ip based], flows can be classified to the VFs as well. With this patch, flows can be re-directed to the requested VF provided in "action" field of command. Please note that driver doesn't really care about the queue bits in "action" field for the VFs. Since queue will be still chosen by FW using RSS hash. [I.e., the classification would be done according to vport-only] For examples - ethtool -N p5p1 flow-type udp4 dst-port 8000 action 0x100000000 ethtool -N p5p1 flow-type tcp4 src-ip 192.16.6.10 action 0x200000000 ethtool -U p5p1 flow-type tcp4 src-ip 192.168.40.100 dst-ip \ 192.168.40.200 src-port 6660 dst-port 5550 \ action 0x100000000 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qed*: Support other classification modes.Manish Chopra1-2/+29
Currently, driver supports flow classification to PF receive queues based on TCP/UDP 4 tuples [src_ip, dst_ip, src_port, dst_port] only. This patch enables to configure different flow profiles [For example - only UDP dest port or src_ip based] on the adapter so that classification can be done according to just those fields as well. Although, at a time just one type of flow configuration is supported due to limited number of flow profiles available on the device. For example - ethtool -N enp7s0f0 flow-type udp4 dst-port 45762 action 2 ethtool -N enp7s0f0 flow-type tcp4 src-ip 192.16.4.10 action 1 ethtool -N enp7s0f0 flow-type udp6 dst-port 45762 action 3 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qede: Validate unsupported configurationsManish Chopra1-0/+73
Validate and prevent some of the configurations for unsupported [by firmware] inputs [for example - mac ext, vlans, masks/prefix, tos/tclass] via ethtool -N/-U. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qede: Refactor ethtool rx classification flow.Manish Chopra1-182/+330
This patch simplifies the ethtool rx flow configuration [via ethtool -U/-N] flow code base by dividing it logically into various APIs based on given protocols. It also separates various validations and calculations done along the flow in their own APIs. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23qede: Add support for populating ethernet TLVs.Sudarsana Reddy Kalluru1-0/+101
This patch adds callbacks for providing the ethernet protocol driver TLVs. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18qede: Add build_skb() support.Manish Chopra4-174/+137
This patch makes use of build_skb() throughout in driver's receieve data path [HW gro flow and non HW gro flow]. With this, driver can build skb directly from the page segments which are already mapped to the hardware instead of allocating new SKB via netdev_alloc_skb() and memcpy the data which is quite costly. This really improves performance (keeping same or slight gain in rx throughput) in terms of CPU utilization which is significantly reduced [almost half] in non HW gro flow where for every incoming MTU sized packet driver had to allocate skb, memcpy headers etc. Additionally in that flow, it also gets rid of bunch of additional overheads [eth_get_headlen() etc.] to split headers and data in the skb. Tested with: system: 2 sockets, 4 cores per socket, hyperthreading, 2x4x2=16 cores iperf [server]: iperf -s iperf [client]: iperf -c <server_ip> -t 500 -i 10 -P 32 HW GRO off – w/o build_skb(), throughput: 36.8 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.59 0.00 32.93 0.00 0.00 43.07 0.00 0.00 23.42 HW GRO off - with build_skb(), throughput: 36.9 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.70 0.00 31.70 0.00 0.00 25.68 0.00 0.00 41.92 HW GRO on - w/o build_skb(), throughput: 36.9 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.86 0.00 24.14 0.00 0.00 6.59 0.00 0.00 68.41 HW GRO on - with build_skb(), throughput: 37.5 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.87 0.00 23.75 0.00 0.00 6.19 0.00 0.00 69.19 Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14qede: Fix ref-cnt usage countMichal Kalderon1-2/+1
Rebooting while qedr is loaded with a VLAN interface present results in unregister_netdevice waiting for the usage count to become free. The fix is that rdma devices should be removed before unregistering the netdevice, to assure all references to ndev are decreased. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10qede: Fix gfp flags sent to rdma event node allocationMichal Kalderon1-1/+1
A previous commit 4609adc27175 ("qede: Fix qedr link update") added a flow that could allocate rdma event objects from an interrupt path (link notification). Therefore the kzalloc call should be done with GFP_ATOMIC. fixes: 4609adc27175 ("qede: Fix qedr link update") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08qed*: Refactor mf_mode to consist of bits.Sudarsana Reddy Kalluru1-2/+2
`mf_mode' field indicates the multi-partitioning mode the device is configured to. This method doesn't scale very well, adding a new MF mode requires going over all the existing conditions, and deciding whether those are needed for the new mode or not. The patch defines a set of bit-fields for modes which are derived according to the mode info shared by the MFW and all the configuration would be made according to those. To add a new mode, there would be a single place where we'll need to go and choose which bits apply and which don't. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20qed* : Add new TLV to request PF to update MAC in bulletin boardShahed Shaikh1-0/+4
There may be a need for VF driver to request PF to explicitly update its bulletin with a MAC address. e.g. When user assigns a MAC address to VF while VF is still down, and PF's bulletin board contains different MAC address, in this case, when VF's interface is brought up, it gets loaded with MAC address from bulletin board which is not desirable. To handle this corner case, we need a new TLV to request PF to update its bulletin board with suggested MAC. This request will be honored only for trusted VFs. Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20qed* : use trust mode to allow VF to override forced MACShahed Shaikh1-2/+1
As per existing behavior, when PF sets a MAC address for a VF (also called as forced MAC), VF is not allowed to change its MAC address afterwards. This puts the limitation on few use cases such as bonding of VFs, where bonding driver asks VF to change its MAC address. This patch uses a VF trust mode to allow VF to change its MAC address in spite PF has set a forced MAC for that VF. Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-14/+6
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Do not drop rx-checksum invalidated packets.Manish Chopra1-8/+2
Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Ethtool flash update support.Sudarsana Reddy Kalluru1-0/+9
The patch adds ethtool callback implementation for flash update. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27qede: Fix barrier usage after tx doorbell write.Manish Chopra1-6/+4
Since commit c5ad119fb6c09b0297446be05bd66602fa564758 ("net: sched: pfifo_fast use skb_array") driver is exposed to an issue where it is hitting NULL skbs while handling TX completions. Driver uses mmiowb() to flush the writes to the doorbell bar which is a write-combined bar, however on x86 mmiowb() does not flush the write combined buffer. This patch fixes this problem by replacing mmiowb() with wmb() after the write combined doorbell write so that writes are flushed and synchronized from more than one processor. V1->V2: ------- This patch was marked as "superseded" in patchwork. (Not really sure for what reason).Resending it as v2. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22qede: fix spelling mistake: "registeration" -> "registration"Colin Ian King2-3/+3
Trivial fix to spelling mistakes in DP_ERR error message text and comments Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16qede: Fix qedr link updateMichal Kalderon1-2/+2
Link updates were not reported to qedr correctly. Leading to cases where a link could be down, but qedr would see it as up. In addition, once qede was loaded, link state would be up, regardless of the actual link state. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller3-0/+13
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-01-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add a start of a framework for extending struct xdp_buff without having the overhead of populating every data at runtime. Idea is to have a new per-queue struct xdp_rxq_info that holds read mostly data (currently that is, queue number and a pointer to the corresponding netdev) which is set up during rxqueue config time. When a XDP program is invoked, struct xdp_buff holds a pointer to struct xdp_rxq_info that the BPF program can then walk. The user facing BPF program that uses struct xdp_md for context can use these members directly, and the verifier rewrites context access transparently by walking the xdp_rxq_info and net_device pointers to load the data, from Jesper. 2) Redo the reporting of offload device information to user space such that it works in combination with network namespaces. The latter is reported through a device/inode tuple as similarly done in other subsystems as well (e.g. perf) in order to identify the namespace. For this to work, ns_get_path() has been generalized such that the namespace can be retrieved not only from a specific task (perf case), but also from a callback where we deduce the netns (ns_common) from a netdevice. bpftool support using the new uapi info and extensive test cases for test_offload.py in BPF selftests have been added as well, from Jakub. 3) Add two bpftool improvements: i) properly report the bpftool version such that it corresponds to the version from the kernel source tree. So pick the right linux/version.h from the source tree instead of the installed one. ii) fix bpftool and also bpf_jit_disasm build with bintutils >= 2.9. The reason for the build breakage is that binutils library changed the function signature to select the disassembler. Given this is needed in multiple tools, add a proper feature detection to the tools/build/features infrastructure, from Roman. 4) Implement the BPF syscall command BPF_MAP_GET_NEXT_KEY for the stacktrace map. It is currently unimplemented, but there are use cases where user space needs to walk all stacktrace map entries e.g. for dumping or deleting map entries w/o having to close and recreate the map. Add BPF selftests along with it, from Yonghong. 5) Few follow-up cleanups for the bpftool cgroup code: i) rename the cgroup 'list' command into 'show' as we have it for other subcommands as well, ii) then alias the 'show' command such that 'list' is accepted which is also common practice in iproute2, and iii) remove couple of newlines from error messages using p_err(), from Jakub. 6) Two follow-up cleanups to sockmap code: i) remove the unused bpf_compute_data_end_sk_skb() function and ii) only build the sockmap infrastructure when CONFIG_INET is enabled since it's only aware of TCP sockets at this time, from John. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-06xdp/qede: setup xdp_rxq_info and intro xdp_rxq_info_is_regJesper Dangaard Brouer3-0/+13
The driver code qede_free_fp_array() depend on kfree() can be called with a NULL pointer. This stems from the qede_alloc_fp_array() function which either (kz)alloc memory for fp->txq or fp->rxq. This also simplifies error handling code in case of memory allocation failures, but xdp_rxq_info_unreg need to know the difference. Introduce xdp_rxq_info_is_reg() to handle if a memory allocation fails and detect this is the failure path by seeing that xdp_rxq_info was not registred yet, which first happens after successful alloaction in qede_init_fp(). Driver hook points for xdp_rxq_info: * reg : qede_init_fp * unreg: qede_free_fp_array Tested on actual hardware with samples/bpf program. V2: Driver have no proper error path for failed XDP RX-queue info reg, as qede_init_fp() is a void function. Cc: everest-linux-l2@cavium.com Cc: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-02qed*: Advance drivers' version to 8.33.0.20Tomer Tayar1-3/+3
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Utilize FW 8.33.1.0Tomer Tayar1-5/+21
Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch, and includes changes to FW interface files, device initialization flows, FW interaction flows, and debug collection flows. Modify Ethernet driver (qede) to make use of new FW in fastpath. Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath. Modify FCoE driver (qedf) to make use of new FW in fastpath. Modify iSCSI driver (qedi) to make use of new FW in fastpath. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: HSI renaming for different types of HWTomer Tayar1-1/+1
This patch renames defines and structures in the FW HSI files to allow a distinction between different types of HW. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19qede: Use NETIF_F_GRO_HW.Michael Chan4-18/+25
Advertise NETIF_F_GRO_HW and set edev->gro_disable according to the feature flag. Add qede_fix_features() to drop NETIF_F_GRO_HW if XDP is running or MTU does not support GRO_HW or GRO is not set. qede_change_mtu() also checks and disables GRO_HW if MTU is not supported. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03net: xdp: make the stack take care of the tear downJakub Kicinski1-4/+0
Since day one of XDP drivers had to remember to free the program on the remove path. This leads to code duplication and is error prone. Make the stack query the installed programs on unregister and if something is installed, remove the program. Freeing of program attached to XDP generic is moved from free_netdev() as well. Because the remove will now be called before notifiers are invoked, BPF offload state of the program will not get destroyed before uninstall. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-05net: bpf: rename ndo_xdp to ndo_bpfJakub Kicinski3-4/+4
ndo_xdp is a control path callback for setting up XDP in the driver. We can reuse it for other forms of communication between the eBPF stack and the drivers. Rename the callback and associated structures and definitions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 03:33:56 +0300