summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/pensando
AgeCommit message (Collapse)AuthorFilesLines
2024-02-16ionic: Add XDP packet headroomShannon Nelson1-23/+45
If an xdp program is loaded, add headroom at the beginning of the frame to allow for editing and insertions that an XDP program might need room for, and tailroom used later for XDP frame tracking. These are only needed in the first Rx buffer in a packet, not for any trailing frags. Co-developed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-16ionic: add initial framework for XDP supportShannon Nelson6-14/+269
Set up the basics for running Rx packets through XDP programs. Add new queue setup and teardown steps for adding/removing an XDP program, and add the call to run the XDP on a packet. The XDP frame size needs to be the MTU plus standard ethernet header, plus head room for XDP scribblings and tail room for a struct skb_shared_info. Also, at this point, we don't support XDP frags, only a single contiguous Rx buffer. This means that our page splitting is not very useful, so when XDP is in use we need to use the full Rx buffer size and not do sharing. Co-developed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-16ionic: use dma range APIsShannon Nelson1-7/+6
Convert Rx datapath handling to use the DMA range APIs in preparation for adding XDP handling. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-16ionic: add helpers for accessing buffer infoShannon Nelson1-13/+24
These helpers clean up some of the code around DMA mapping and other buffer references, and will be used in the next few patches for the XDP support. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-16ionic: set adminq irq affinityShannon Nelson1-1/+4
We claim to have the AdminQ on our irq0 and thus cpu id 0, but we need to be sure we set the affinity hint to try to keep it there. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-13ionic: minimal work with 0 budgetShannon Nelson1-0/+9
We should be doing as little as possible besides freeing Tx space when our napi routines are called with budget of 0, so jump out before doing anything besides Tx cleaning. See commit afbed3f74830 ("net/mlx5e: do as little as possible in napi poll when budget is 0") for more info. Fixes: fe8c30b50835 ("ionic: separate interrupt for Tx and Rx") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240210001307.48450-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki1-12/+14
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13ionic: fill out pci error handlersShannon Nelson1-0/+25
Set up the pci_error_handlers error_detected and resume to be useful in handling AER events. If the error detected is pci_channel_io_frozen we set up to do an FLR at the end of the AER handling - this tends to clear things up well enough that traffic can continue. Else, let the AER/PCI machinery do what is needed for the less serious errors seen. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: lif debugfs refresh on resetShannon Nelson2-0/+4
Remove and restore the lif's debugfs pointers on a reset, and make sure to check for the dentry before removing it in case an earlier reset failed to rebuild the lif. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: use timer_shutdown_syncShannon Nelson1-1/+1
When stopping the watchdog timer at remove time we should be using the new timer_shutdown_sync to assure the timer doesn't ever get rearmed. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: no fw read when PCI reset failedShannon Nelson2-5/+23
If there was a failed attempt to reset the PCI connection, don't later try to read from PCI as the space is unmapped and will cause a paging request crash. When clearing the PCI setup we can clear the dev_info register pointer, and check it before using it in the fw_running test. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: prevent pci disable of already disabled deviceShannon Nelson1-1/+3
If a reset fails, the PCI device is left in a disabled state, so don't try to disable it again on driver remove. This prevents a scary looking WARN trace in the kernel log. ionic 0000:2b:00.0: disabling already-disabled device Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: bypass firmware cmds when stuck in resetShannon Nelson3-7/+20
If the driver or firmware is stuck in reset state, don't bother trying to use adminq commands. This speeds up shutdown and prevents unnecessary timeouts and error messages. This includes a bit of rework on ionic_adminq_post_wait() and ionic_adminq_post_wait_nomsg() to both use __ionic_adminq_post_wait() which can do the checks needed in both cases. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: keep filters across FLRShannon Nelson1-0/+2
Make sure we keep and replay the filters and RSS config across an FLR by using our FW_RESET flag. This gets checked on the way down and on the way back up to help determine how much LIF state to keep and restore across a reset action. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-13ionic: pass opcode to devcmd_waitShannon Nelson3-1/+3
Don't rely on the PCI memory for the devcmd opcode because we read a 0xff value if the PCI bus is broken, which can cause us to report a bogus dev_cmd opcode later. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com1-2/+2
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-9/+9
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: Re-arrange ionic_intr_info struct for cache perfBrett Creeley1-2/+2
dim_coal_hw is accessed in the hotpath along with other values from the first cacheline of ionic_intr_info. So, re-arrange the structure so the hot path variables are on the first cacheline. Before: struct ionic_intr_info { char name[32]; /* 0 32 */ unsigned int index; /* 32 4 */ unsigned int vector; /* 36 4 */ u64 rearm_count; /* 40 8 */ unsigned int cpu; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ cpumask_t affinity_mask; /* 56 1024 */ /* --- cacheline 16 boundary (1024 bytes) was 56 bytes ago --- */ u32 dim_coal_hw; /* 1080 4 */ /* size: 1088, cachelines: 17, members: 7 */ /* sum members: 1080, holes: 1, sum holes: 4 */ /* padding: 4 */ }; After: struct ionic_intr_info { char name[32]; /* 0 32 */ u64 rearm_count; /* 32 8 */ unsigned int index; /* 40 4 */ unsigned int vector; /* 44 4 */ unsigned int cpu; /* 48 4 */ u32 dim_coal_hw; /* 52 4 */ cpumask_t affinity_mask; /* 56 1024 */ /* size: 1080, cachelines: 17, members: 7 */ /* last cacheline: 56 bytes */ }; Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-6-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: Make the check for Tx HW timestamping more obviousBrett Creeley2-5/+10
Currently the checks are: [1] unlikely(q->features & IONIC_TXQ_F_HWSTAMP) [2] !unlikely(q->features & IONIC_TXQ_F_HWSTAMP) [1] is clear enough, but [2] isn't exactly obvious to the reader because !unlikely reads as likely. However, that's not what this means. [2] means that it's unlikely that the q has IONIC_TXQ_F_HWSTAMP enabled. Write an inline helper function to hide the unlikely optimization to make these checks more readable. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-5-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: Don't check null when calling vfree()Brett Creeley1-8/+4
vfree() checks for null internally, so there's no need to check in the caller. So, always vfree() on variables allocated with valloc(). If the variables are never alloc'd vfree() is still safe. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: set ionic ptr before setting up ethtool opsShannon Nelson1-1/+1
Set the lif->ionic value that is used in some ethtool callbacks before setting ethtool ops. There really shouldn't be any race issues before this change since the netdev hasn't been registered yet, but this seems more correct. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: Use cached VF attributesBrett Creeley5-149/+11
Each time a VF attribute is set via iproute a call to get the VF configuration is also made. This is currently problematic because for each VF configuration call there are multiple commands sent to the device. Unfortunately, this doesn't scale well. Fix this by reporting the cached VF attributes. The original change to query the device for getting the VF attributes f16f5be31009 ("ionic: Query FW when getting VF info via ndo_get_vf_config") was made to remain consistent with device set VF attributes. However, after further investigation there is no need to query the device. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20231204210936.16587-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: Fix dim work handling in split interrupt modeBrett Creeley1-8/+8
Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06ionic: fix snprintf format length warningShannon Nelson1-1/+1
Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107cabea3 ("ionic: more ionic name tweaks") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/ Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-14ionic: replace deprecated strncpy with strscpyJustin Stitt1-2/+2
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not needed due to `ident` being memset'd to 0 just before the copy. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-pensando-ionic-ionic_main-c-v1-1-23c62a16ff58@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2-3/+8
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-20ionic: expand the descriptor bufs arrayShannon Nelson1-1/+2
When processing a TSO we may have frags spread across several descriptors, and the total count of frags in one skb may exceed our per descriptor IONIC_MAX_FRAGS: this is fine as long as each descriptor has fewer frags than the limit. Since the skb could have as many as MAX_SKB_FRAGS, and the first descriptor is where we track and map the frag buffers, we need to be sure we can map buffers for all of the frags plus the TSO header in the first descriptor's buffer array. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20ionic: add a check for max SGs and SKB fragsShannon Nelson1-0/+12
Add a check of the queue's max_sg_elems against the maximum frags we expect to see per SKB and take the smaller of the two as our max for the queues' descriptor buffer allocations. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20ionic: count SGs in packet to minimize linearizeShannon Nelson1-9/+68
There are some cases where an skb carries more frags than the number of SGs that ionic can support per descriptor - this forces the driver to linearize the skb. However, if this is a TSO packet that is going to become multiple descriptors (one per MTU-sized packet) and spread the frags across them, this time-consuming linearization is likely not necessary. We scan the frag list and count up the number of SGs that would be created for each descriptor that would be generated, and only linearize if we hit the SG limit on a descriptor. In most cases, we won't even get to the frag list scan, so this doesn't affect typical traffic. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-16ionic: fix 16bit math issue when PAGE_SIZE >= 64KBDavid Christensen2-3/+8
The ionic device supports a maximum buffer length of 16 bits (see ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to the receive rings, the function ionic_rx_fill() uses 16bit math when calculating the number of pages to allocate for an RX descriptor, given the interface's MTU setting. If the system PAGE_SIZE >= 64KB, and the buf_info->page_offset is 0, the remain_len value will never decrement from the original MTU value and the frag_len value will always be 0, causing additional pages to be allocated as scatter- gather elements unnecessarily. A similar math issue exists in ionic_rx_frags(), but no failures have been observed here since a 64KB page should not normally require any scatter-gather elements at any legal Ethernet MTU size. Fixes: 4b0a7539a372 ("ionic: implement Rx page reuse") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-22ionic: Remove unused declarationsYue Haibing3-3/+0
Commit fbfb8031533c ("ionic: Add hardware init and device commands") declared but never implemented ionic_q_rewind()/ionic_set_dma_mask(). Commit 969f84394604 ("ionic: sync the filters in the work task") declared but never implemented ionic_rx_filters_need_sync(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20230821134717.51936-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+16
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-06ionic: Add missing err handling for queue reconfigNitya Sunkad1-7/+16
ionic_start_queues_reconfig returns an error code if txrx_init fails. Handle this error code in the relevant places. This fixes a corner case where the device could get left in a detached state if the CMB reconfig fails and the attempt to clean up the mess also fails. Note that calling netif_device_attach when the netdev is already attached does not lead to unexpected behavior. Change goto name "errout" to "err_out" to maintain consistency across goto statements. Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers") Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler") Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: add FLR recovery supportShannon Nelson3-4/+62
Add support for the PCI reset handlers in order to manage an FLR event. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: pull out common bits from fw_upShannon Nelson1-22/+42
Pull out some code from ionic_lif_handle_fw_up() that can be used in the coming FLR recovery patch. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: extract common bits from ionic_probeShannon Nelson1-35/+49
Pull out some chunks of code from ionic_probe() that will be common in rebuild paths. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ionic: extract common bits from ionic_removeShannon Nelson1-12/+13
Pull out a chunk of code from ionic_remove() that will be common in teardown paths. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07ionic: remove dead device fail pathShannon Nelson1-6/+0
Remove the probe error path code that leaves the driver bound to the device, but with essentially a dead device. This was useful maybe twice early in the driver's life and no longer makes sense to keep. Fixes: 30a1e6d0f8e2 ("ionic: keep ionic dev on lif init fail") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07ionic: remove WARN_ON to prevent panic_on_warnNitya Sunkad1-5/+0
Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. Fixes: 77ceb68e29cc ("ionic: Add notifyq support") Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-27ionic: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-12-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12ionic: add support for ethtool extended stat link_down_countNitya Sunkad3-0/+12
Following the example of 'commit 9a0f830f8026 ("ethtool: linkstate: add a statistic for PHY down events")', added support for link down events. Add callback ionic_get_link_ext_stats to ionic_ethtool.c to support link_down_count, a property of netdev that gets reported exclusively on physical link down events. Run ethtool -I <devname> to display the device link down count. Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03ionic: catch failure from devlink_allocShannon Nelson1-0/+2
Add a check for NULL on the alloc return. If devlink_alloc() fails and we try to use devlink_priv() on the NULL return, the kernel gets very unhappy and panics. With this fix, the driver load will still fail, but at least it won't panic the kernel. Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03ionic: remove noise from ethtool rxnfc error msgShannon Nelson1-1/+1
It seems that ethtool is calling into .get_rxnfc more often with ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't need to log a message about it, just return not supported. Fixes: aa3198819bea6 ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-12ionic: Don't overwrite the cyclecounter bitmaskBrett Creeley1-3/+2
The driver was incorrectly overwriting the cyclecounter bitmask, which was truncating it and not aligning to the hardware mask value. This isn't causing any issues, but it's wrong. Fix this by not constraining the cyclecounter/hardware mask. Luckily, this seems to cause no issues, which is why this change doesn't have a fixes tag and isn't being sent to net. However, if any transformations from time->cycles are needed in the future, this change will be needed. Suggested-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24ionic: Remove redundant pci_clear_masterCai Huoqing1-1/+0
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: add tx/rx-push support with device Component Memory BuffersShannon Nelson8-21/+404
The ionic device has on-board memory (CMB) that can be used for descriptors as a way to speed descriptor access for faster packet processing. It is rumored to improve latency and/or packets-per-second for some profiles of small packet traffic, although your mileage may vary. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: remove unnecessary void castsShannon Nelson4-7/+7
Minor Code cleanup details. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: remove unnecessary indirectionShannon Nelson1-2/+2
We have the pointer already, don't need to go through the lif struct for it. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-04ionic: missed doorbell workaroundAllen Hubbe6-4/+176
In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-04ionic: clear up notifyq alloc commentaryShannon Nelson1-5/+7
Make sure the q+cq alloc for NotifyQ is clearly documented and don't bother with unnecessary local variables. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 22:53:02 +0300