| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a netdev is enslaved to a VRF master, its router interface (RIF)
needs to be destroyed (if exists) and a new one created using the
corresponding virtual router (VR).
>From the driver's perspective, the above is equivalent to an inetaddr
event sent for this netdev. Therefore, when a port netdev (or its
uppers) are enslaved to a VRF master, call the same function that
would've been called had a NETDEV_UP was sent for this netdev in the
inetaddr notification chain.
This patch also fixes a bug when a LAG netdev with an existing RIF is
enslaved to a VRF. Before this patch, each LAG port would drop the
reference on the RIF, but would re-join the same one (in the wrong VR)
soon after. With this patch, the corresponding RIF is first destroyed
and a new one is created using the correct VR.
Fixes: 7179eb5acd59 ("mlxsw: spectrum_router: Add support for VRFs")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct esw_mc_addr is a small struct that can be part of struct
mlx5_eswitch. Define it as a field and not as a pointer and save the
kzalloc call and then error flow handling.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
We will activate the HW LRO only on servers with PCI BW > MAX LINK BW,
or when PCI BW > 16Gbps. On other cases we do not want LRO by default as
LRO sessions might get timeout and add redundant software overhead.
Tested:
ethtool -k <ifs-name> | grep large-receive-offload
On systems with and without the limitations.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
CQE ownership indication is as small as a single bit.
Use u8 to speedup the comparison.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
"prefetchw()" prefetches the cacheline for write. Use it for
skb->data, as soon we'll be copying the packet header there.
Performance:
Single-stream packet-rate tested with pktgen.
Packets are dropped in tc level to zoom into driver data-path.
Larger gain is expected for smaller packets, as less time
is spent on handling SKB fragments, making the path shorter
and the improvement more significant.
---------------------------------------------
packet size | before | after | gain |
64B | 4,113,306 | 4,778,720 | 16% |
1024B | 3,633,819 | 3,950,593 | 8.7% |
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
UMR operations are more frequent and important.
Check them first, and add a compiler branch predictor hint.
According to current design, ICOSQ CQ can contain at most one
pending CQE per napi. Poll function is optimized accordingly.
Performance:
Single-stream packet-rate tested with pktgen.
Packets are dropped in tc level to zoom into driver data-path.
Larger gain is expected for larger packet sizes, as BW is higher
and UMR posts are more frequent.
---------------------------------------------
packet size | before | after | gain |
64B | 4,092,370 | 4,113,306 | 0.5% |
1024B | 3,421,435 | 3,633,819 | 6.2% |
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The user can change delay_first_probe_time parameter through sysctl.
Listen to NETEVENT_DELAY_PROBE_TIME_UPDATE notifications and update the
intervals for updating the neighbours 'used' value periodic task and
for flow HW counters query periodic task.
Both of the intervals will be update only in case the new delay prob
time value is lower the current interval.
Since the driver saves only one min interval value and not per device,
the users will be able to set lower interval value for updating
neighbour 'used' value periodic task but they won't be able to schedule
a higher interval for this periodic task.
The used interval for scheduling neighbour 'used' value periodic task is
the minimal delay prob time parameter ever seen by the driver.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When IP tunnel encapsulation rules are offloaded, the kernel can't see
the traffic of the offloaded flow. The neighbour for the IP tunnel
destination of the offloaded flow can mistakenly become STALE and
deleted by the kernel since its 'used' value wasn't changed.
To make sure that a neighbour which is used by the HW won't become
STALE, we proactively update the neighbour 'used' value every
DELAY_PROBE_TIME period, when packets were matched and counted by the HW
for one of the tunnel encap flows related to this neighbour.
The periodic task that updates the used neighbours is scheduled when a
tunnel encap rule is successfully offloaded into HW and keeps re-scheduling
itself as long as the representor's neighbours list isn't empty.
Add, remove, lookup and status change operations done over the
representor's neighbours list or the neighbour hash entry encaps list
are all serialized by RTNL lock.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In order to offload TC encap rules, the driver does a lookup for the IP
tunnel neighbour according to the output device and the destination IP
given by the user.
To keep tracking after the validity state of such neighbours, we keep
the neighbours information (pair of device pointer and destination IP)
in a hash table maintained at the relevant egress representor and
register to get NETEVENT_NEIGH_UPDATE events. When getting neighbour update
netevent, we search for a match among the cached neighbours entries used for
encapsulation.
In case the neighbour isn't valid, we can't offload the flow into the
HW. We cache the flow (requested matching and actions) in the driver and
offload the rule later, when the neighbour is resolved and becomes
valid.
When a flow is only cached in the driver and not offloaded into HW
yet, we use EAGAIN return value to mark it internally, the TC ndo still
returns success.
Listen to kernel neighbour update netevents to trace relevant neighbours
validity state:
1. If a neighbour becomes valid, offload the related rules to HW.
2. If the neighbour becomes invalid, remove the related rules from HW.
3. If the neighbour mac address was changed, update the encap header.
Remove all the offloaded rules using the old encap header from the HW
and insert new rules to HW with updated encap header.
Access to the neighbors hash table is protected by RTNL lock of its
caller or by the table's spinlock.
Details of the locking/synchronization among the different actions
applied on the neighbour table:
Add/remove operations - protected by RTNL lock of its caller (all TC
commands are protected by RTNL lock). Add and remove operations are
initiated only when the user inserts/removes a TC rule into/from the driver.
Lookup/remove operations - since the lookup operation is done from
netevent notifier block, RTNL lock can't be used (atomic context).
Use the table's spin lock to protect lookups from TC user removal operation.
bh is used since netevent can be called from a softirq context.
Lookup/add operations - The hash table access functions are taking
care of the protection between lookup and add operations.
When adding/removing encap headers and rules to/from the HW, RTNL lock
is used. It can happen when:
1. The user inserts/removes a TC rule into/from the driver (TC commands
are protected by RTNL lock of it's caller).
2. The driver gets neighbour notification event, which reports about
neighbour validity status change. Before adding/removing encap headers
and rules to/from the HW, RTNL lock is taken.
A neighbour hash table entry should be freed when its encap list is empty.
Since The neighbour update netevent notification schedules a neighbour
update work that uses the neighbour hash entry, it can't be freed
unconditionally when the encap list becomes empty during TC delete rule flow.
Use reference count to protect from freeing neighbour hash table entry
while it's still in use.
When the user asks to unregister a netdvice used by one of the neigbours,
neighbour removal notification is received. Then we take a reference on the
neighbour and don't free it until the relevant encap entries (and flows) are
marked as invalid (not offloaded) and removed from HW.
As long as the encap entry is still valid (checked under RTNL lock) we
can safely access the neighbour device saved on mlx5e_neigh struct.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add hash table to the representors which is to be used by the next patch
to save neighbours information in the driver.
In order to offload IP tunnel encapsulation rules, the driver must find
the tunnel dst neighbour according to the output device and the
destination address given by the user. The next patch will cache the
neighbors information in the driver to allow support in neigh update
flow for tunnel encap rules.
The neighbour entries are also saved in a list so we easily iterate over
them when querying statistics in order to provide 'used' feedback to the
kernel neighbour NUD core.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The nud_state and hardware address fields are protected by the neighbour
lock, we should acquire it before accessing those parameters.
Use this lock to avoid inconsistency between the neighbour validity state
and it's hardware address.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Instead of relaying on the 'flow->rule' pointer value which can be
valid or invalid (in case the FW returns an error while trying to offload
the rule), monitor the rule state using a flag.
In downstream patch which adds support to IP tunneling neigh update
flow, a TC rule could be cached in the driver and not offloaded into the
HW. In this case, the flow handle pointer stays NULL.
Check the offloaded flag to properly deal with rules which are currently
not offloaded when querying rule statistics.
This patch doesn't add any new functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
definition
Passing output device parameter to the helper functions that deal with
creation of encapsulation headers is redundant. Output device parameter
can be defined inside those helpers, no need to pass it. Refactor the code by
removing the parameter from the function signature.
This patch doesn't change any functionality.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The encap entry structure isn't manipulated by the eswitch code,
hence it can/needs to be removed from the eswitch header.
Do that, and change it to have mlx5e_ prefix.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Encap wise, the tc eswitch flow attribute struct needs to have
only the encap ID which is programmed later to the HW and none
of the higher level encap params, fix that.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Make representor netdev private data extendable by adding new struct
"mlx5e_rep_priv" and use it as the rep netdev private data struct
instead of directly pointing to mlx5_eswitch_rep.
Added new en_rep.h header file to contain all representor related
definitions and prototypes, and moved all representor specific logic
into en_rep.c.
Needed for downstream patches to extend representor functionality to
support neighbour update.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2017-04-22
This series contains some mlx5 fixes for net.
For your convenience, the series doesn't introduce any conflict with
the ongoing net-next pull request.
Please pull and let me know if there's any problem.
For -stable:
("net/mlx5: E-Switch, Correctly deal with inline mode on ConnectX-5") kernels >= 4.10
("net/mlx5e: Fix ETHTOOL_GRXCLSRLALL handling") kernels >= 4.8
("net/mlx5e: Fix small packet threshold") kernels >= 4.7
("net/mlx5: Fix driver load bad flow when having fw initializing timeout") kernels >= 4.4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have observed a sudden spike in rx/tx_packets and rx/tx_bytes
reported under /proc/net/dev. There is a race in mlx5e_update_stats()
and some of the get-stats functions (the one that we hit is the
mlx5e_get_stats() which is called by ndo_get_stats64()).
In particular, the very first thing mlx5e_update_sw_counters()
does is 'memset(s, 0, sizeof(*s))'. For example, if mlx5e_get_stats()
is unlucky at one point, rx_bytes and rx_packets could be 0. One second
later, a normal (and much bigger than 0) value will be reported.
This patch is to use a 'struct mlx5e_sw_stats temp' to avoid
a direct memset zero on priv->stats.sw.
mlx5e_update_vport_counters() has a similar race. Hence, addressed
together. However, memset zero is removed instead because
it is not needed.
I am lucky enough to catch this 0-reset in rx multicast:
eth0: 41457665 76804 70 0 0 70 0 47085 15586634 87502 3 0 0 0 3 0
eth0: 41459860 76815 70 0 0 70 0 47094 15588376 87516 3 0 0 0 3 0
eth0: 41460577 76822 70 0 0 70 0 0 15589083 87521 3 0 0 0 3 0
eth0: 41463293 76838 70 0 0 70 0 47108 15595872 87538 3 0 0 0 3 0
eth0: 41463379 76839 70 0 0 70 0 47116 15596138 87539 3 0 0 0 3 0
v2: Remove memset zero from mlx5e_update_vport_counters()
v1: Use temp and memcpy
Fixes: 9218b44dcc05 ("net/mlx5e: Statistics handling refactoring")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size
of the table, regardless of the amount of entries in it.
Existing code does not do that, and this breaks all usage of ethtool -N
or -n without explicit location, with this error:
rmgr: Invalid RX class rules table size: Success
Set info->data to the table size.
Tested:
ethtool -n ens8
ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1
ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55
ethtool -n ens8
ethtool -N ens8 delete 1023
ethtool -N ens8 delete 55
Fixes: f913a72aa008 ("net/mlx5e: Add support to get ethtool flow rules")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
RX packet headers are meant to be contained in SKB linear part,
and chose a threshold of 128.
It turns out this is not enough, i.e. for IPv6 packet over VxLAN.
In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes,
and 86 bytes for TCP/IPv6. In total 136 bytes that is more than
current 128 bytes. In this case expand header flow is reached.
The warning in skb_try_coalesce() caused by a wrong truesize
was already fixed here:
commit 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()").
Still, we prefer to totally avoid the expand header flow for performance reasons.
Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found.
Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When UAR is released, we deallocate the device resource, but
don't unmmap the UAR mapping memory.
Fix the leak by unmapping this memory.
Fixes: a6d51b68611e9 ('net/mlx5: Introduce blue flame register allocator)
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Otherwise the code that fills the ipv6 encapsulation headers could be writing
beyond the allocated headers buffer.
Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Otherwise the code that fills the ipv4 encapsulation headers could be writing
beyond the allocated headers buffer.
Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
On ConnectX5 the wqe inline mode is "none" and hence the FW
reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED.
Fix our devlink callbacks to deal with that on get and set.
Also fix the tc flow parsing code not to fail anything when
inline isn't required.
Fixes: bffaa916588e ('net/mlx5: E-Switch, Add control for inline mode')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
If FW is stuck in initializing state we will skip the driver load, but
current error handling flow doesn't clean previously allocated command
interface resources.
Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix sparse warning about missing prototypes. The rx/tx code path
defines functions with prototypes in ipoib.h.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix sparse warnings in recent ipoib support.
The RDMA functions are not used yet, hide behind #ifdef.
Based on comment, they will eventually be local so make static.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Implement the devlink e-switch encapsulation control set and get
callbacks. Apply the value set by the user on the switchdev offloads
mode when creating the fast FDB table where offloaded rules will be set.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Refactor the creation of the fast path FDB table that holds the
offloaded rules in SRIOV switchdev mode into it's own function.
This will be used in the next patch to be able and re-create the
table under different settings without going through legacy mode.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The labels were out of order, so it either could result in an Oops or a
leak.
Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When there is no FID set for a specific packet, the HW will drop it.
However, by default these packets are useful to be delivered to CPU as
it can inspect them and program HW accordingly. So add this trap.
This would only ever happen when port is enslaved to an OVS master.
Otherwise, packets would be dropped during VLAN / STP filtering,
before FID classification.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
>From now on, a port can become a slave of OVS master. All vlans
are enabled, STP state is set to "forwarding". It is up to the OVS
userspace daemon to setup the flows either in kernel or in HW using TC
flower offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far, mlxsw_sp_port_vlan_set range is limited by
MLXSW_REG_SPVM_REC_MAX_COUNT. In spectrum_switchdev code this is
wrapped up by a helper function which actually does multiple calls
to FW for bigger ranges. Move the code into mlxsw_sp_port_vlan_set
and use it always. That allows caller not to care about the range.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HW requires the FID to be valid in order for the forward action to work.
So regardless of the current FID validity, just set the dummy FID which
would do the trick.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For forwarding using ACL action, HW needs a valid FID to be setup. It
does not actually use it, so it can be any valid FID. So create a dummy
FID only for this purpose.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement part of multipurpose Virtual Router and Forwarding Domain
Action that takes care of setting up FID. We need to use it to be able
to forward packets using ACL action when no FID is associated on RX.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gcc 4.8.4 complains that mlx4_SW2HW_MPT_wrapper() uses an uninitialized
'mpt' variable:
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_MPT_wrapper':
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:2802:12: warning: 'mpt' may be used uninitialized in this function [-Wmaybe-uninitialized]
mpt->mtt = mtt;
I think this warning is a false complaint. mpt is only used when
mr_res_start_move_to() return zero, and in all such cases it initializes
mpt. But apparently gcc cannot see that.
Initialize mpt to avoid the warning.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the driver support only ethernet eswitch, and we want to
protect downstream IPoIB netdev from trying to access it in IB link.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement IPoIB RX SKB handler.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to have different RX handler per profile, fix and refactor the
current code to take the rx handler directly from the netdevice profile
rather than computing it on runtime as it was done with the switchdev
mode representor rx handler.
This will also remove the current wrong assumption in mlx5e_alloc_rq
code that mlx5e_priv->ppriv is of the type vport_rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement mlx5e's IPoIB SKB transmit using the helper functions provided
by mlx5e ethernet tx flow, the only difference in the code between
mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill
(UD datagram segment) in the TX descriptor (WQE) and it doesn't need to
have any vlan handling.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Break current mlx5e xmit flow into smaller blocks (helper functions)
in order to reuse them for IPoIB SKB transmission.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS
and TX HW context to perform on IPoIB traffic.
Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going
through this QP when the ULP IPoIB decides to cleanup.
Implement attach/detach mcast RDMA netdev callbacks for later RDMA
netdev use.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement open/close of IPoIB netdevice ndos using mlx5e's
channels API to manage data path resources (RQs/SQs/CQs).
Set IPoIB netdev address on dev_init ndo.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify mlx5e tis creation function to accept underlay qp number, which
will be needed by IPoIB.
Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to
create one TIS with the IPoIB underlay qp, for IPoIB TX SQs.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering
tables, but IPoIB do not require MAC and VLAN steering tables so the
only tables we create in here are:
1. TTC Table (Traffic Type Classifier table for RSS steering)
2. ARFS Table (for accelerated RFS support)
Creation of those tables is identical to mlx5e ethernet mode, hence the
use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation,
All we do here is simply reuse the mlx5e implementation to create
direct and indirect (RSS) steering HW objects.
For that we just expose
mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h
and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile
callbacks.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c
file with empty implementation.
Downstream patches will provide the full mlx5 rdma netdevice acceleration
support for IPoIB into this new file, by using the mlx5e netdevice
profile and new mlx5_channels APIs and infrastructures.
Same as already done in mlx5e NIC netdevice and switchdev mode VF
representors.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
