summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2023-11-13ice: adjust switchdev rebuild pathMichal Swiatkowski3-49/+28
There is no need to use specific functions for rebuilding path. Let's use current implementation by removing all representors and as the result remove switchdev environment. It will be added in devices rebuild path. For example during adding VFs, port representors for them also will be created. Rebuild control plane VSI before removing representors with INIT_VSI flag set to reinit VSI in hardware after reset. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: add VF representors one by oneMichal Swiatkowski5-242/+228
Implement adding representors one by one. Always set switchdev environment when first representor is being added and clear environment when last one is being removed. Basic switchdev configuration remains the same. Code related to creating and configuring representor was changed. Instead of setting whole representors in one function handle only one representor in setup function. The same with removing representors. Stop representors when new one is being added or removed. Stop means, disabling napi, stopping traffic and removing slow path rule. It is needed because ::q_id will change after remapping, so each representor will need new rule. When representor are stopped rebuild control plane VSI with one more or one less queue. One more if new representor is being added, one less if representor is being removed. Bridge port is removed during unregister_netdev() call on PR, so there is no need to call it from driver side. After that do remap new queues to correct vector. At the end start all representors (napi enable, start queues, add slow path rule). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: realloc VSI stats arraysMichal Swiatkowski1-19/+39
Previously only case when queues amount is lower was covered. Implement realloc for case when queues amount is higher than previous one. Use krealloc() function and zero new allocated elements. It has to be done before ice_vsi_def_cfg(), because stats element for ring is set there. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: set Tx topology every time new repr is addedMichal Swiatkowski4-7/+59
It is needed to track correct Tx topology. Update it every time new representor is created or remove node in case of removing corresponding representor. Still clear all node when removing switchdev mode as part of Tx topology isn't related only to representors. Also clear ::rate_note value to prevent skipping this node next time Tx topology is created. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: allow changing SWITCHDEV_CTRL VSI queuesMichal Swiatkowski1-3/+10
Implement mechanism to change number of queues for SWITCHDEV_CTRL VSI type. Value from ::req_txq/rxq will be written to ::alloc_txq/rxq after calling ice_vsi_rebuild(). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: return pointer to representorMichal Swiatkowski1-7/+10
In follow up patches it will be easier to obtain created port representor pointer instead of the id. Without it the pattern from eswitch side will look like: - create PR - get PR based on the id Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: make representor code genericMichal Swiatkowski8-92/+131
Representor code needs to be independent from specific device type, like in this case VF. Make generic add / remove representor function and specific add VF / rem VF function. New device types will follow this scheme. In bridge offload code there is a need to get representor pointer based on VSI. Implement helper function to achieve that. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove VF pointer reference in eswitch codeMichal Swiatkowski4-22/+25
Make eswitch code generic by removing VF pointer reference in functions. It is needed to support eswitch mode for other type of devices. Previously queue id used for Rx was based on VF number. Use ::q_id saved in port representor instead. After adding or removing port representor ::q_id value can change. It isn't good idea to iterate over representors list using this value. Use xa_find starting from the first one instead to get next port representor to remap. The number of port representors has to be equal to ::num_rx/tx_q. Warn if it isn't true. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track port representors in xarrayMichal Swiatkowski5-101/+94
Instead of assuming that each VF has pointer to port representor save it in xarray. It will allow adding port representor for other device types. Drop reference to VF where it is use only to get port representor. Get it from xarray instead. The functions will no longer by specific for VF, rename them. Track id assigned by xarray in port representor structure. The id can't be used as ::q_id, because it is fixed during port representor lifetime. ::q_id can change after adding / removing other port representors. Side effect of removing VF pointer is that we are losing VF MAC information used in unrolling. Store it in port representor as parent MAC. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: use repr instead of vf->reprMichal Swiatkowski1-7/+7
Extract repr from vf->repr as it is often use in the ice_repr_rem(). Remove meaningless clearing of q_vector and netdev pointers as kfree is called on repr pointer. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track q_id in representorMichal Swiatkowski3-1/+3
Previously queue index of control plane VSI used by port representor was always id of VF. If we want to allow adding port representors for different devices we have to track queue index in the port representor structure. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove unused control VSI parameterMichal Swiatkowski1-4/+3
It isn't used in ice_eswitch_release_reprs(). Probably leftover. Remove it. Commit that has removed usage of ctrl_vsi: commit c1e5da5dd465 ("ice: improve switchdev's slow-path") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove redundant max_vsi_num variableMichal Swiatkowski1-4/+0
It is a leftover from previous implementation. Accidentally it wasn't removed. Do it now. Commit that has removed it: commit c1e5da5dd465 ("ice: improve switchdev's slow-path") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: rename switchdev to eswitchMichal Swiatkowski4-42/+43
Eswitch is used as a prefix for related functions. Main structure storing all data related to eswitch should also be named as eswitch instead of ice_switchdev_info. Rename it. Also rename switchdev to eswitch where the context is not about eswitch mode. ::uplink_netdev was changed to netdev for simplicity. There is no other netdev in function scope so it is obvious. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: fix DDP package download for packages without signature segmentDan Nowlin1-3/+100
Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/ Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix output pin capabilitiesArkadiusz Kubalewski3-4/+64
The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix check for dpll input priority rangeArkadiusz Kubalewski2-7/+0
Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix initial lock status of dpllArkadiusz Kubalewski1-2/+1
When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-09Merge branch '100GbE' of ↵Jakub Kicinski2-41/+91
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-06 (ice) This series contains updates to ice driver only. Dave removes SR-IOV LAG attribute for only the interface being disabled to allow for proper unwinding of all interfaces. Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC due to non-allowed sleeping. Aniruddha and Marcin fix redirection and drop rules for switchdev by properly setting and marking egress/ingress type. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix VF-VF direction matching in drop rule in switchdev ice: Fix VF-VF filter rules in switchdev mode ice: lag: in RCU, use atomic allocation ice: Fix SRIOV LAG disable on non-compliant aggregate ==================== Link: https://lore.kernel.org/r/20231107004844.655549-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-09Merge branch '40GbE' of ↵Jakub Kicinski2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-06 (i40e) This series contains updates to i40e driver only. Ivan Vecera resolves a couple issues with devlink; removing a call to devlink_port_type_clear() and ensuring devlink port is unregistered after the net device. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix devlink port unregistering i40e: Do not call devlink_port_type_clear() ==================== Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-07idpf: fix potential use-after-free in idpf_tso()Eric Dumazet1-2/+4
skb_cow_head() can change skb->head (and thus skb_shinfo(skb)) We must not cache skb_shinfo(skb) before skb_cow_head(). Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Madhu Chittim <madhu.chittim@intel.com> Cc: Phani Burra <phani.r.burra@intel.com> Cc: Sridhar Samudrala <sridhar.samudrala@intel.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Bailey Forrest <bcf@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231103200451.514047-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-07ice: Fix VF-VF direction matching in drop rule in switchdevMarcin Szycik1-1/+23
When adding a drop rule on a VF, rule direction is not being set, which results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS equals 0). Because of this, drop rules added on port representors don't match any packets. To fix it, set rule direction in drop action to egress when netdev is a port representor, otherwise set it to ingress. Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-07ice: Fix VF-VF filter rules in switchdev modeAniruddha Paul1-28/+62
Any packet leaving VSI i.e VF's VSI is considered as egress traffic by HW, thus failing to match the added rule. Mark the direction for redirect rules as below: 1. VF-VF - Egress 2. Uplink-VF - Ingress 3. VF-Uplink - Egress 4. Link_Partner-Uplink - Ingress 5. Link_Partner-VF - Ingress Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-07ice: lag: in RCU, use atomic allocationMichal Schmidt1-3/+3
Sleeping is not allowed in RCU read-side critical sections. Use atomic allocations under rcu_read_lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Fixes: 41ccedf5ca8f ("ice: implement lag netdev event handler") Fixes: 3579aa86fb40 ("ice: update reset path for SRIOV LAG support") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-07ice: Fix SRIOV LAG disable on non-compliant aggregateDave Ertman1-9/+3
If an attribute of an aggregate interface disqualifies it from supporting SRIOV, the driver will unwind the SRIOV support. Currently the driver is clearing the feature bit for all interfaces in the aggregate, but this is not allowing the other interfaces to unwind successfully on driver unload. Only clear the feature bit for the interface that is currently unwinding. Fixes: bf65da2eb279 ("ice: enforce interface eligibility and add messaging for SRIOV LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-07i40e: Fix devlink port unregisteringIvan Vecera1-4/+6
Ensure that devlink port is unregistered after unregistering of net device. Reproducer: [root@host ~]# rmmod i40e [ 4742.939386] i40e 0000:02:00.1: i40e_ptp_stop: removed PHC on enp2s0f1np1 [ 4743.059269] ------------[ cut here ]------------ [ 4743.063900] WARNING: CPU: 21 PID: 10766 at net/devlink/port.c:1078 devl_port_unregister+0x69/0x80 ... Fixes: 9e479d64dc58 ("i40e: Add initial devlink support") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-07i40e: Do not call devlink_port_type_clear()Ivan Vecera1-1/+0
Do not call devlink_port_type_clear() prior devlink port unregister and let devlink core to take care about it. Reproducer: [root@host ~]# rmmod i40e [ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel? [ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel? Fixes: 9e479d64dc58 ("i40e: Add initial devlink support") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-28iavf: delete the iavf client interfaceMichal Schmidt6-871/+1
The iavf client interface was added in 2017 by commit ed0e894de7c1 ("i40evf: add client interface"), but there have never been any in-tree callers. It's not useful for future development either. The Intel out-of-tree iavf and irdma drivers instead use an auxiliary bus, which is a better solution. Remove the iavf client interface code. Also gone are the client_task work and the client_lock mutex. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-9-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: add a common function for undoing the interrupt schemeMichal Schmidt1-11/+15
Add a new function iavf_free_interrupt_scheme that does the inverse of iavf_init_interrupt_scheme. Symmetry is nice. And there will be three callers already. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-8-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: use unregister_netdevMichal Schmidt1-3/+1
Use unregister_netdev, which takes rtnl_lock for us. We don't have to check the reg_state under rtnl_lock. There's nothing to race with. We have just cancelled the finish_config work. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-7-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: rely on netdev's own registered stateMichal Schmidt2-7/+3
The information whether a netdev has been registered is already present in the netdev itself. There's no need for a driver flag with the same meaning. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-6-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: fix the waiting time for initial resetMichal Schmidt1-1/+1
Every time I create VFs on ice, I receive at least one "Device is still in reset (-16), retrying" message per VF. It recovers fine, but typical usecases should not trigger scary-looking messages. The waiting for reset is too short. It makes no sense to check every 10 microseconds. Typical reset waiting times are at least tens of milliseconds and can be several seconds. I suspect the polling interval was meant to be 10 milliseconds all along. IAVF_RESET_WAIT_COMPLETE_COUNT is defined as 2000, so the total waiting time could be over 20 seconds. I have seen resets take 5 seconds (with 128 VFs on ice). The added benefit of not triggering the "Device is still in reset" path is that we avoid going through the __IAVF_INIT_FAILED state, which would take a full second before retrying. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-5-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: in iavf_down, don't queue watchdog_task if comms failedMichal Schmidt1-2/+4
The reason for queueing watchdog_task is to have it process the aq_required flags that are being set here. If comms failed, there's nothing to do, so return early. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-4-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: simplify mutex_trylock+sleep loopsMichal Schmidt1-4/+2
This pattern appears in two places in the iavf source code: while (!mutex_trylock(...)) usleep_range(...); That's just mutex_lock with extra steps. The pattern is a leftover from when iavf used bit flags instead of mutexes for locking. Commit 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") replaced test_and_set_bit with !mutex_trylock, preserving the pattern. Simplify it to mutex_lock. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-28iavf: fix comments about old bit locksMichal Schmidt1-2/+2
Bit lock __IAVF_IN_CRITICAL_TASK does not exist anymore since commit 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections"). Adjust the comments accordingly. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231027175941.1340255-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27ice: Hook up 4 E830 devices by adding their IDsPawel Chmielewski1-0/+4
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27ice: Remove redundant zeroing of the fields.Pawel Chmielewski1-27/+27
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-6-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27ice: Add support for E830 DDP package segmentDan Nowlin3-74/+382
Add support for E830 DDP package segment. For the E830 package, signature buffers will not be included inline in the configuration buffers. Instead, the signature buffers will be located in a signature segment. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-5-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27ice: Add ice_get_link_status_datalenPaul Greenwalt2-6/+53
The Get Link Status data length can vary with different versions of ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return datalen for the specific ice_aqc_get_link_status_data version. Add new link partner fields to ice_aqc_get_link_status_data; PHY type, FEC, and flow control. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-4-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27ice: Add 200G speed/phy type useAlice Michael4-3/+43
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27ice: Add E830 device IDs, MAC type and registersPaul Greenwalt7-61/+141
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Scott Taylor <scott.w.taylor@intel.com> Signed-off-by: Scott Taylor <scott.w.taylor@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-26/+57
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames") 6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Adjacent changes: drivers/net/ethernet/apm/xgene/xgene_enet_main.c 61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void") d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF") net/vmw_vsock/virtio_transport.c 64c99d2d6ada ("vsock/virtio: support to send non-linear skb") 53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26iavf: in iavf_down, disable queues when removing the driverMichal Schmidt1-1/+1
In iavf_down, we're skipping the scheduling of certain operations if the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES request must not be skipped in this case, because iavf_close waits for the transition to the __IAVF_DOWN state, which happens in iavf_virtchnl_completion after the queues are released. Without this fix, "rmmod iavf" takes half a second per interface that's up and prints the "Device resources not yet released" warning. Fixes: c8de44b577eb ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-25i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITRIvan Vecera1-1/+1
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one. Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin1-3/+0
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> CC: Lorenzo Bianconi <lorenzo@kernel.org> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Liang Chen <liangchen.linux@gmail.com> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24idpf: cancel mailbox work in error pathPavan Kumar Linga1-0/+1
In idpf_vc_core_init, the mailbox work is queued on a mailbox workqueue but it is not cancelled on error. This results in a call trace when idpf_mbx_task tries to access the freed mailbox queue pointer. Fix it by cancelling the mailbox work in the error path. Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023202655.173369-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24idpf: set scheduling mode for completion queueMichal Kubiak2-3/+15
The HW must be programmed differently for queue-based scheduling mode. To program the completion queue context correctly, the control plane must know the scheduling mode not only for the Tx queue, but also for the completion queue. Unfortunately, currently the driver sets the scheduling mode only for the Tx queues. Propagate the scheduling mode data for the completion queue as well when sending the queue configuration messages. Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Alan Brady <alan.brady@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023202655.173369-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-21i40e: sync next_to_clean and next_to_process for programming status descTirthendu Sarkar1-1/+8
When a programming status desc is encountered on the rx_ring, next_to_process is bumped along with cleaned_count but next_to_clean is not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in overwriting whole ring with new buffers. Update next_to_clean to point to next_to_process on seeing a programming status desc if not in the middle of handling a multi-frag packet. Also, bump cleaned_count only for such case as otherwise next_to_clean buffer may be returned to hardware on reaching clean_threshold. Fixes: e9031f2da1ae ("i40e: introduce next_to_process to i40e_ring") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reported-by: hq.dev+kernel@msdfc.xyz Reported by: Solomon Peachy <pizza@shaftnet.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678 Tested-by: hq.dev+kernel@msdfc.xyz Tested by: Indrek Järve <incx@dustbite.net> Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20231019203852.3663665-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-21igc: Fix ambiguity in the ethtool advertisingSasha Neftin1-10/+25
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to advertise 2500M speed support and TP (twisted pair) properly. Convert to 'ethtool_link_ksettings_test_link_mode' to advertise supported speed and eliminate ambiguity. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-20igb: Fix potential memory leak in igb_add_ethtool_nfc_entryMateusz Palczewski1-1/+5
Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed. Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 14:31:20 +0300