summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02iavf: Fix TC config comparison with existing adapter TC configSudheer Mogilappagari1-1/+29
[ Upstream commit 54976cf58d6168b8d15cebb395069f23b2f34b31 ] Same number of TCs doesn't imply that underlying TC configs are same. The config could be different due to difference in number of queues in each TC. Add utility function to determine if TC configs are same. Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02i40e: Report MFS in decimal base instead of hexErwan Velu1-2/+2
[ Upstream commit ef3c313119ea448c22da10366faa26b5b4b1a18e ] If the MFS is set below the default (0x2600), a warning message is reported like the following : MFS for port 1 has been set below the default: 600 This message is a bit confusing as the number shown here (600) is in fact an hexa number: 0x600 = 1536 Without any explicit "0x" prefix, this message is read like the MFS is set to 600 bytes. MFS, as per MTUs, are usually expressed in decimal base. This commit reports both current and default MFS values in decimal so it's less confusing for end-users. A typical warning message looks like the following : MFS for port 1 (1536) has been set below the default (9728) Signed-off-by: Erwan Velu <e.velu@criteo.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02i40e: Do not use WQ_MEM_RECLAIM flag for workqueueSindhu Devale1-1/+1
[ Upstream commit 2cc7d150550cc981aceedf008f5459193282425c ] Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27e/0x390 [ +0.000001] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xdf/0x110 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork+0x2d/0x50 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000001] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: 4d5957cbdecd ("i40e: remove WQ_UNBOUND and the task limit of our workqueue") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Robert Ganzynkowicz <robert.ganzynkowicz@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13i40e: fix vf may be used uninitialized in this function warningAleksandr Loktionov1-18/+16
commit f37c4eac99c258111d414d31b740437e1925b8e8 upstream. To fix the regression introduced by commit 52424f974bc5, which causes servers hang in very hard to reproduce conditions with resets races. Using two sources for the information is the root cause. In this function before the fix bumping v didn't mean bumping vf pointer. But the code used this variables interchangeably, so stale vf could point to different/not intended vf. Remove redundant "v" variable and iterate via single VF pointer across whole function instead to guarantee VF pointer validity. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13i40e: fix i40e_count_filters() to count only active/new filtersAleksandr Loktionov1-2/+5
commit eb58c598ce45b7e787568fe27016260417c3d807 upstream. The bug usually affects untrusted VFs, because they are limited to 18 MACs, it affects them badly, not letting to create MAC all filters. Not stable to reproduce, it happens when VF user creates MAC filters when other MACVLAN operations are happened in parallel. But consequence is that VF can't receive desired traffic. Fix counter to be bumped only for new or active filters. Fixes: 621650cabee5 ("i40e: Refactoring VF MAC filters counting to make more reliable") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13ixgbe: avoid sleeping allocation in ixgbe_ipsec_vf_add_sa()Przemek Kitszel1-8/+8
[ Upstream commit aec806fb4afba5fe80b09e29351379a4292baa43 ] Change kzalloc() flags used in ixgbe_ipsec_vf_add_sa() to GFP_ATOMIC, to avoid sleeping in IRQ context. Dan Carpenter, with the help of Smatch, has found following issue: The patch eda0333ac293: "ixgbe: add VF IPsec management" from Aug 13, 2018 (linux-next), leads to the following Smatch static checker warning: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c:917 ixgbe_ipsec_vf_add_sa() warn: sleeping in IRQ context The call tree that Smatch is worried about is: ixgbe_msix_other() <- IRQ handler -> ixgbe_msg_task() -> ixgbe_rcv_msg_from_vf() -> ixgbe_ipsec_vf_add_sa() Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/intel-wired-lan/db31a0b0-4d9f-4e6b-aed8-88266eb5665c@moroto.mountain Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27igb: Fix missing time sync eventsVinicius Costa Gomes1-18/+5
[ Upstream commit ee14cc9ea19ba9678177e2224a9c58cce5937c73 ] Fix "double" clearing of interrupts, which can cause external events or timestamps to be missed. The E1000_TSIRC Time Sync Interrupt Cause register can be cleared in two ways, by either reading it or by writing '1' into the specific cause bit. This is documented in section 8.16.1. The following flow was used: 1. read E1000_TSIRC into 'tsicr'; 2. handle the interrupts present into 'tsirc' and mark them in 'ack'; 3. write 'ack' into E1000_TSICR; As both (1) and (3) will clear the interrupt cause, if the same interrupt happens again between (1) and (3) it will be ignored, causing events to be missed. Remove the extra clear in (3). Fixes: 00c65578b47b ("igb: enable internal PPS for the i210") Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27igb: move PEROUT and EXTTS isr logic to separate functionsRuud Bos1-35/+46
[ Upstream commit cf99c1dd7b7729091043374b90807c7a5f9fd9b1 ] Remove code duplication in the tsync interrupt handler function by moving this logic to separate functions. This keeps the interrupt handler readable and allows the new functions to be extended for adapter types other than i210. Signed-off-by: Ruud Bos <kernel.hbk@gmail.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: ee14cc9ea19b ("igb: Fix missing time sync events") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink()Rand Deeb1-0/+2
[ Upstream commit 06e456a05d669ca30b224b8ed962421770c1496c ] The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink") Signed-off-by: Rand Deeb <rand.sec96@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15i40e: disable NAPI right after disabling irqs when handling xsk_poolMaciej Fijalkowski1-1/+1
[ Upstream commit d562b11c1eac7d73f4c778b4cbe5468f86b1f20d ] Disable NAPI before shutting down queues that this particular NAPI contains so that the order of actions in i40e_queue_pair_disable() mirrors what we do in i40e_queue_pair_enable(). Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}ableMaciej Fijalkowski1-7/+49
[ Upstream commit cbf996f52c4e658b3fb4349a869a62fd2d4c3c1c ] Currently routines that are supposed to toggle state of ring pair do not take care of associated interrupt with queue vector that these rings belong to. This causes funky issues such as dead interface due to irq misconfiguration, as per Pavel's report from Closes: tag. Add a function responsible for disabling single IRQ in EIMC register and call this as a very first thing when disabling ring pair during xsk_pool setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this, disable/enable NAPI as first/last thing when dealing with closing or opening ring pair that xsk_pool is being configured on. Reported-by: Pavel Vazharov <pavel@x3me.net> Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/ Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i40e: Fix waiting for queues of all VSIs to be disabledIvan Vecera1-1/+1
[ Upstream commit c73729b64bb692186da080602cd13612783f52ac ] The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs up to 'pf->hw.func_caps.num_vsis' but this is incorrect because the real number of VSIs can be up to 'pf->num_alloc_vsi' that can be higher. Fix this loop. Fixes: 69129dc39fac ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()Christophe JAILLET1-1/+2
[ Upstream commit bbc404d20d1b46d89b461918bc44587620eda200 ] All error handling paths, except this one, go to 'out' where release_swfw_sync() is called. This call balances the acquire_swfw_sync() call done at the beginning of the function. Branch to the error handling path in order to correctly release some resources in case of error. Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Refactor overtemp event handlingJedrzej Jagielski5-41/+43
[ Upstream commit 6c1b4af8c1b20c70dde01e58381685d6a4a1d2c8 ] Currently ixgbe driver is notified of overheating events via internal IXGBE_ERR_OVERTEMP error code. Change the approach for handle_lasi() to use freshly introduced is_overtemp function parameter which set when such event occurs. Change check_overtemp() to bool and return true if overtemp event occurs. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Refactor returning internal error codesJedrzej Jagielski12-317/+264
[ Upstream commit 5795f533f30a80aa0473652876296ebc9129e33a ] Change returning codes to the kernel ones instead of the internal ones for the entire ixgbe driver. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Remove non-inclusive languagePiotr Skajewski3-25/+25
[ Upstream commit 93b067f154b3edfd3d75a272fd9433bf787e2e1d ] Remove non-inclusive language from the driver. Additionally correct the duplication "from from" reported by checkpatch after the changes above. Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i40e: Fix VF disable behavior to block all trafficAndrii Staikov2-0/+33
[ Upstream commit 31deb12e85c35ddd2c037f0107d05d8674cab2c0 ] Currently, if a VF is disabled using the 'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still able to receive traffic. Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable' to completely shutdown the VF's queues making it entirely disabled and not able to receive or send any traffic. Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable' command to make a VF do reinitialization bringing the queues back up. Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15i40e: Restore VF MSI-X state during PCI resetAndrii Staikov3-0/+32
[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ] During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality. Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling. Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler") Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15i40e: fix use-after-free in i40e_aqc_add_filters()Ke Xiao1-1/+7
[ Upstream commit 6a15584e99db8918b60e507539c7446375dcf366 ] Commit 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") avoided use-after-free issues, by increasing refcount during update the VSI filter list to the HW. However, it missed the unicast situation. When deleting an unicast FDB entry, the i40e driver will release the mac_filter, and i40e_service_task will concurrently request firmware to add the mac_filter, which will lead to the following use-after-free issue. Fix again for both netdev->uc and netdev->mc. BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e] Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379 CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G Workqueue: i40e i40e_service_task [i40e] Call Trace: dump_stack+0x71/0xab print_address_description+0x6b/0x290 kasan_report+0x14a/0x2b0 i40e_aqc_add_filters+0x55c/0x5b0 [i40e] i40e_sync_vsi_filters+0x1676/0x39c0 [i40e] i40e_service_task+0x1397/0x2bb0 [i40e] process_one_work+0x56a/0x11f0 worker_thread+0x8f/0xf40 kthread+0x2a0/0x390 ret_from_fork+0x1f/0x40 Allocated by task 21948: kasan_kmalloc+0xa6/0xd0 kmem_cache_alloc_trace+0xdb/0x1c0 i40e_add_filter+0x11e/0x520 [i40e] i40e_addr_sync+0x37/0x60 [i40e] __hw_addr_sync_dev+0x1f5/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_add_excl+0x137/0x190 i40e_ndo_fdb_add+0x161/0x260 [i40e] rtnl_fdb_add+0x567/0x950 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Freed by task 21948: __kasan_slab_free+0x137/0x190 kfree+0x8b/0x1b0 __i40e_del_filter+0x116/0x1e0 [i40e] i40e_del_mac_filter+0x16c/0x300 [i40e] i40e_addr_unsync+0x134/0x1b0 [i40e] __hw_addr_sync_dev+0xff/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_del+0x77/0x90 rtnl_fdb_del+0x6a5/0x860 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn> Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Di Zhu <zhudi2@huawei.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15i40e: Fix filter input checks to prevent config with invalid valuesSudheer Mogilappagari1-4/+4
[ Upstream commit 3e48041d9820c17e0a51599d12e66c6e12a8d08d ] Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean2-2/+2
[ Upstream commit 1f5020acb33f926030f62563c86dffca35c7b701 ] Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 9fc95fe95c3e ("net: fec: correct queue selection") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13i40e: Fix unexpected MFS warning messageIvan Vecera1-1/+1
[ Upstream commit 7d9f22b3d3ef379ed05bd3f3e2de83dfa8da8258 ] Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added a warning message that reports unexpected size of port's MFS (max frame size) value. This message use for the port number local variable 'i' that is wrong. In i40e_probe() this 'i' variable is used only to iterate VSIs to find FDIR VSI: <code> ... /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) { i40e_vsi_open(pf->vsi[i]); break; } } ... </code> So the warning message use for the port number index of FDIR VSI if this exists or pf->num_alloc_vsi if not. Fix the message by using 'pf->hw.port' for the port number. Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20i40e: fix potential memory leaks in i40e_remove()Andrii Staikov1-3/+7
[ Upstream commit 5ca636d927a106780451d957734f02589b972e2b ] Instead of freeing memory of a single VSI, make sure the memory for all VSIs is cleared before releasing VSIs. Add releasing of their resources in a loop with the iteration number equal to the number of allocated VSIs. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITRIvan Vecera1-1/+1
[ Upstream commit 77a8c982ff0d4c3a14022c6fe9e3dbfb327552ec ] The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one. Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08igc: Fix ambiguity in the ethtool advertisingSasha Neftin1-10/+25
[ Upstream commit e7684d29efdf37304c62bb337ea55b3428ca118e ] The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to advertise 2500M speed support and TP (twisted pair) properly. Convert to 'ethtool_link_ksettings_test_link_mode' to advertise supported speed and eliminate ambiguity. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08igb: Fix potential memory leak in igb_add_ethtool_nfc_entryMateusz Palczewski1-1/+5
[ Upstream commit 8c0b48e01daba5ca58f939a8425855d3f4f2ed14 ] Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed. Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25i40e: prevent crash on probe if hw registers have invalid valuesMichal Schmidt1-2/+2
commit fc6f716a5069180c40a8c9b63631e97da34f64a3 upstream. The hardware provides the indexes of the first and the last available queue and VF. From the indexes, the driver calculates the numbers of queues and VFs. In theory, a faulty device might say the last index is smaller than the first index. In that case, the driver's calculation would underflow, it would attempt to write to non-existent registers outside of the ioremapped range and crash. I ran into this not by having a faulty device, but by an operator error. I accidentally ran a QE test meant for i40e devices on an ice device. The test used 'echo i40e > /sys/...ice PCI device.../driver_override', bound the driver to the device and crashed in one of the wr32 calls in i40e_clear_hw. Add checks to prevent underflows in the calculations of num_queues and num_vfs. With this fix, the wrong device probing reports errors and returns a failure without crashing. Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25ice: reset first in crash dump kernelsJesse Brandeburg1-0/+15
commit 0288c3e709e5fabd51e84715c5c798a02f43061a upstream. When the system boots into the crash dump kernel after a panic, the ice networking device may still have pending transactions that can cause errors or machine checks when the device is re-enabled. This can prevent the crash dump kernel from loading the driver or collecting the crash data. To avoid this issue, perform a function level reset (FLR) on the ice device via PCIe config space before enabling it on the crash kernel. This will clear any outstanding transactions and stop all queues and interrupts. Restore the config space after the FLR, otherwise it was found in testing that the driver wouldn't load successfully. The following sequence causes the original issue: - Load the ice driver with modprobe ice - Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs - Trigger a crash with echo c > /proc/sysrq-trigger - Load the ice driver again (or let it load automatically) with modprobe ice - The system crashes again during pcim_enable_device() Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") Reported-by: Vishal Agrawal <vagrawal@redhat.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25ice: fix over-shifted variableJesse Brandeburg1-2/+1
commit 242e34500a32631f85c2b4eb6cb42a368a39e54f upstream. Since the introduction of the ice driver the code has been double-shifting the RSS enabling field, because the define already has shifts in it and can't have the regular pattern of "a << shiftval & mask" applied. Most places in the code got it right, but one line was still wrong. Fix this one location for easy backports to stable. An in-progress patch fixes the defines to "standard" and will be applied as part of the regular -next process sometime after this one. Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> CC: stable@vger.kernel.org Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25ixgbe: fix crash with empty VF macvlan listDan Carpenter1-2/+3
[ Upstream commit 7b5add9af567c44e12196107f0fe106e194034fd ] The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: Fix VF VLAN offloading when port VLAN is configuredIvan Vecera1-3/+4
[ Upstream commit d0d362ffa33da4acdcf7aee2116ceef8c8fef658 ] If port VLAN is configured on a VF then any other VLANs on top of this VF are broken. During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities but this reset occurs too early, prior setting of vf->info.pvid field and because this field can be zero during i40e_vc_get_vf_resources_msg() then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver. This is wrong because iavf driver should not report VLAN offloading capability when port VLAN is configured as i40e does not support QinQ offloading. Fix the issue by moving VF reset after setting of vf->port_vlan_id field. Without this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ dmesg -l err | grep iavf [1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID With this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: off [requested on] tx-vlan-offload: off [requested on] $ dmesg -l err | grep iavf Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19ixgbe: fix timestamp configuration codeVadim Fedorenko1-13/+15
[ Upstream commit 3c44191dd76cf9c0cc49adaf34384cbd42ef8ad2 ] The commit in fixes introduced flags to control the status of hardware configuration while processing packets. At the same time another structure is used to provide configuration of timestamper to user-space applications. The way it was coded makes this structures go out of sync easily. The repro is easy for 82599 chips: [root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1 current settings: tx_type 0 rx_filter 0 new settings: tx_type 1 rx_filter 12 The eth0 device is properly configured to timestamp any PTPv2 events. [root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1 current settings: tx_type 1 rx_filter 12 SIOCSHWTSTAMP failed: Numerical result out of range The requested time stamping mode is not supported by the hardware. The error is properly returned because HW doesn't support all packets timestamping. But the adapter->flags is cleared of timestamp flags even though no HW configuration was done. From that point no RX timestamps are received by user-space application. But configuration shows good values: [root@hostname ~]# hwstamp_ctl -i eth0 current settings: tx_type 1 rx_filter 12 Fix the issue by applying new flags only when the HW was actually configured. Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19igb: Change IGB_MIN to allow set rx/tx value between 64 and 80Olga Zaborska1-2/+2
[ Upstream commit 6319685bdc8ad5310890add907b7c42f89302886 ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igb devices can use as low as 64 descriptors. This change will unify igb with other drivers. Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64") Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80Olga Zaborska1-2/+2
[ Upstream commit 8360717524a24a421c36ef8eb512406dbd42160a ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igbvf devices can use as low as 64 descriptors. This change will unify igbvf with other drivers. Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64") Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19igc: Change IGC_MIN to allow set rx/tx value between 64 and 80Olga Zaborska1-2/+2
[ Upstream commit 5aa48279712e1f134aac908acde4df798955a955 ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igc devices can use as low as 64 descriptors. This change will unify igc with other drivers. Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64") Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19igb: disable virtualization features on 82580Corinna Vinschen1-2/+3
[ Upstream commit fa09bc40b21a33937872c4c4cf0f266ec9fa4869 ] Disable virtualization features on 82580 just as on i210/i211. This avoids that virt functions are acidentally called on 82850. Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19igb: set max size RX buffer when store bad packet is enabledRadoslaw Tyl1-4/+7
commit bb5ed01cd2428cd25b1c88a3a9cba87055eb289f upstream. Increase the RX buffer size to 3K when the SBP bit is on. The size of the RX buffer determines the number of pages allocated which may not be sufficient for receive frames larger than the set MTU size. Cc: stable@vger.kernel.org Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19ice: ice_aq_check_events: fix off-by-one check when filling bufferPrzemek Kitszel1-6/+7
[ Upstream commit e1e8a142c43336e3d25bfa1cb3a4ae7d00875c48 ] Allow task's event buffer to be filled also in the case that it's size is exactly the size of the message. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30igb: Avoid starting unnecessary workqueuesAlessio Igor Bogani1-12/+12
[ Upstream commit b888c510f7b3d64ca75fc0f43b4a4bd1a611312f ] If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting PTP related workqueues. In this way we can fix this: BUG: unable to handle page fault for address: ffffc9000440b6f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0 Oops: 0000 [#1] PREEMPT SMP [...] Workqueue: events igb_ptp_overflow_check RIP: 0010:igb_rd32+0x1f/0x60 [...] Call Trace: igb_ptp_read_82580+0x20/0x50 timecounter_read+0x15/0x60 igb_ptp_overflow_check+0x1a/0x50 process_one_work+0x1cb/0x3c0 worker_thread+0x53/0x3f0 ? rescuer_thread+0x370/0x370 kthread+0x142/0x160 ? kthread_associate_blkcg+0xc0/0xc0 ret_from_fork+0x1f/0x30 Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.") Fixes: d339b1331616 ("igb: add PTP Hardware Clock code") Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ice: fix receive buffer size miscalculationJesse Brandeburg1-1/+2
[ Upstream commit 10083aef784031fa9f06c19a1b182e6fad5338d9 ] The driver is misconfiguring the hardware for some values of MTU such that it could use multiple descriptors to receive a packet when it could have simply used one. Change the driver to use a round-up instead of the result of a shift, as the shift can truncate the lower bits of the size, and result in the problem noted above. It also aligns this driver with similar code in i40e. The insidiousness of this problem is that everything works with the wrong size, it's just not working as well as it could, as some MTU sizes end up using two or more descriptors, and there is no way to tell that is happening without looking at ice_trace or a bus analyzer. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26i40e: fix misleading debug logsAndrii Staikov1-8/+8
[ Upstream commit 2f2beb8874cb0844e84ad26e990f05f4f13ff63f ] Change "write" into the actual "read" word. Change parameters description. Fixes: 7073f46e443e ("i40e: Add AQ commands for NVM Update for X722") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11ice: Fix memory management in ice_ethtool_fdir.cJedrzej Jagielski1-12/+14
[ Upstream commit a3336056504d780590ac6d6ac94fbba829994594 ] Fix ethtool FDIR logic to not use memory after its release. In the ice_ethtool_fdir.c file there are 2 spots where code can refer to pointers which may be missing. In the ice_cfg_fdir_xtrct_seq() function seg may be freed but even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)). In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input may first fail to be added via ice_fdir_update_list_entry() but then may be deleted by ice_fdir_update_list_entry. Terminate in both cases when the returned value of the previous operation is other than 0, free memory and don't use it anymore. Reported-by: Michal Schmidt <mschmidt@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423 Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11vxlan: calculate correct header length for GPEJiri Benc1-1/+1
[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ] VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()Wang Ming1-1/+1
[ Upstream commit 043b1f185fb0f3939b7427f634787706f45411c4 ] The debugfs_create_dir() function returns error pointers. It never returns NULL. Most incorrect error checks were fixed, but the one in i40e_dbg_init() was forgotten. Fix the remaining error check. Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Wang Ming <machel@vivo.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27iavf: Fix out-of-bounds when setting channels on removeDing Hui1-1/+1
[ Upstream commit 7c4bced3caa749ce468b0c5de711c98476b23a52 ] If we set channels greater during iavf_remove(), and waiting reset done would be timeout, then returned with error but changed num_active_queues directly, that will lead to OOB like the following logs. Because the num_active_queues is greater than tx/rx_rings[] allocated actually. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 3506.152887] iavf 0000:41:02.0: Removing device [ 3510.400799] ================================================================== [ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536 [ 3510.400823] [ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 3510.400835] Call Trace: [ 3510.400851] dump_stack+0x71/0xab [ 3510.400860] print_address_description+0x6b/0x290 [ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400868] kasan_report+0x14a/0x2b0 [ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf] [ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf] [ 3510.400891] ? wait_woken+0x1d0/0x1d0 [ 3510.400895] ? notifier_call_chain+0xc1/0x130 [ 3510.400903] pci_device_remove+0xa8/0x1f0 [ 3510.400910] device_release_driver_internal+0x1c6/0x460 [ 3510.400916] pci_stop_bus_device+0x101/0x150 [ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20 [ 3510.400924] pci_iov_remove_virtfn+0x187/0x420 [ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10 [ 3510.400929] ? pci_get_subsys+0x90/0x90 [ 3510.400932] sriov_disable+0xed/0x3e0 [ 3510.400936] ? bus_find_device+0x12d/0x1a0 [ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e] [ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 3510.400968] ? pci_get_device+0x7c/0x90 [ 3510.400970] ? pci_get_subsys+0x90/0x90 [ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210 [ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 3510.401001] sriov_numvfs_store+0x214/0x290 [ 3510.401005] ? sriov_totalvfs_show+0x30/0x30 [ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.401011] ? __check_object_size+0x15a/0x350 [ 3510.401018] kernfs_fop_write+0x280/0x3f0 [ 3510.401022] vfs_write+0x145/0x440 [ 3510.401025] ksys_write+0xab/0x160 [ 3510.401028] ? __ia32_sys_read+0xb0/0xb0 [ 3510.401031] ? fput_many+0x1a/0x120 [ 3510.401032] ? filp_close+0xf0/0x130 [ 3510.401038] do_syscall_64+0xa0/0x370 [ 3510.401041] ? page_fault+0x8/0x30 [ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 3510.401073] RIP: 0033:0x7f3a9bb842c0 [ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0 [ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001 [ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700 [ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001 [ 3510.401090] [ 3510.401093] Allocated by task 76795: [ 3510.401098] kasan_kmalloc+0xa6/0xd0 [ 3510.401099] __kmalloc+0xfb/0x200 [ 3510.401104] iavf_init_interrupt_scheme+0x26f/0x1310 [iavf] [ 3510.401108] iavf_watchdog_task+0x1d58/0x4050 [iavf] [ 3510.401114] process_one_work+0x56a/0x11f0 [ 3510.401115] worker_thread+0x8f/0xf40 [ 3510.401117] kthread+0x2a0/0x390 [ 3510.401119] ret_from_fork+0x1f/0x40 [ 3510.401122] 0xffffffffffffffff [ 3510.401123] In timeout handling, we should keep the original num_active_queues and reset num_req_queues to 0. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27iavf: Fix use-after-free in free_netdevDing Hui1-4/+1
[ Upstream commit 5f4fa1672d98fe99d2297b03add35346f1685d6b ] We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch #2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igb: Fix igb_down hung on surprise removalYing Hsu1-0/+5
[ Upstream commit 004d25060c78fc31f66da0fa439c544dda1ac9d5 ] In a setup where a Thunderbolt hub connects to Ethernet and a display through USB Type-C, users may experience a hung task timeout when they remove the cable between the PC and the Thunderbolt hub. This is because the igb_down function is called multiple times when the Thunderbolt hub is unplugged. For example, the igb_io_error_detected triggers the first call, and the igb_remove triggers the second call. The second call to igb_down will block at napi_synchronize. Here's the call trace: __schedule+0x3b0/0xddb ? __mod_timer+0x164/0x5d3 schedule+0x44/0xa8 schedule_timeout+0xb2/0x2a4 ? run_local_timers+0x4e/0x4e msleep+0x31/0x38 igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4] __igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4] igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4] __dev_close_many+0x95/0xec dev_close_many+0x6e/0x103 unregister_netdevice_many+0x105/0x5b1 unregister_netdevice_queue+0xc2/0x10d unregister_netdev+0x1c/0x23 igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4] pci_device_remove+0x3f/0x9c device_release_driver_internal+0xfe/0x1b4 pci_stop_bus_device+0x5b/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_and_remove_bus_device+0x12/0x19 pciehp_unconfigure_device+0x76/0xe9 pciehp_disable_slot+0x6e/0x131 pciehp_handle_presence_or_link_change+0x7a/0x3f7 pciehp_ist+0xbe/0x194 irq_thread_fn+0x22/0x4d ? irq_thread+0x1fd/0x1fd irq_thread+0x17b/0x1fd ? irq_forced_thread_fn+0x5f/0x5f kthread+0x142/0x153 ? __irq_get_irqchip_state+0x46/0x46 ? kthread_associate_blkcg+0x71/0x71 ret_from_fork+0x1f/0x30 In this case, igb_io_error_detected detaches the network interface and requests a PCIE slot reset, however, the PCIE reset callback is not being invoked and thus the Ethernet connection breaks down. As the PCIE error in this case is a non-fatal one, requesting a slot reset can be avoided. This patch fixes the task hung issue and preserves Ethernet connection by ignoring non-fatal PCIE errors. Signed-off-by: Ying Hsu <yinghsu@chromium.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igc: Fix inserting of empty frame for launchtimeFlorian Kauer1-1/+1
[ Upstream commit 0bcc62858d6ba62cbade957d69745e6adeed5f3d ] The insertion of an empty frame was introduced with commit db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") in order to ensure that the current cycle has at least one packet if there is some packet to be scheduled for the next cycle. However, the current implementation does not properly check if a packet is already scheduled for the current cycle. Currently, an empty packet is always inserted if and only if txtime >= end_of_cycle && txtime > last_tx_cycle but since last_tx_cycle is always either the end of the current cycle (end_of_cycle) or the end of a previous cycle, the second part (txtime > last_tx_cycle) is always true unless txtime == last_tx_cycle. What actually needs to be checked here is if the last_tx_cycle was already written within the current cycle, so an empty frame should only be inserted if and only if txtime >= end_of_cycle && end_of_cycle > last_tx_cycle. This patch does not only avoid an unnecessary insertion, but it can actually be harmful to insert an empty packet if packets are already scheduled in the current cycle, because it can lead to a situation where the empty packet is actually processed as the first packet in the upcoming cycle shifting the packet with the first_flag even one cycle into the future, finally leading to a TX hang. The TX hang can be reproduced on a i225 with: sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x1 \ txtime-delay 500000 \ clockid CLOCK_TAI sudo tc qdisc replace dev enp1s0 parent 100:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload \ skip_sock_check and traffic generator sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns with traffic.cfg #define ETH_P_IP 0x0800 { /* Ethernet Header */ 0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed 0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 48, 1, # IP Src - adapt as needed 10, 0, 48, 10, # IP Dest - adapt as needed const16(5555), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } and the observed message with that is for example igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang Tx Queue <0> TDH <32> TDT <3c> next_to_use <3c> next_to_clean <32> buffer_info[next_to_clean] time_stamp <ffff26a8> next_to_watch <00000000632a1828> jiffies <ffff27f8> desc.status <1048000> Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igc: Fix launchtime before start of cycleFlorian Kauer1-1/+1
[ Upstream commit c1bca9ac0bcb355be11354c2e68bc7bf31f5ac5a ] It is possible (verified on a running system) that frames are processed by igc_tx_launchtime with a txtime before the start of the cycle (baset_est). However, the result of txtime - baset_est is written into a u32, leading to a wrap around to a positive number. The following launchtime > 0 check will only branch to executing launchtime = 0 if launchtime is already 0. Fix it by using a s32 before checking launchtime > 0. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igc: set TP bit in 'supported' and 'advertising' fields of ↵Prasad Koya1-0/+2
ethtool_link_ksettings [ Upstream commit 9ac3fc2f42e5ffa1e927dcbffb71b15fa81459e2 ] set TP bit in the 'supported' and 'advertising' fields. i225/226 parts only support twisted pair copper. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Prasad Koya <prasad@arista.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 15:10:35 +0300