summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22ixgbe: allow to increase MTU to 3K with XDP enabledJason Xing1-9/+16
commit f9cd6a4418bac6a046ee78382423b1ae7565fb24 upstream. Recently I encountered one case where I cannot increase the MTU size directly from 1500 to a much bigger value with XDP enabled if the server is equipped with IXGBE card, which happened on thousands of servers in production environment. After applying the current patch, we can set the maximum MTU size to 3K. This patch follows the behavior of changing MTU as i40e/ice does. References: [1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP") [2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-15ice: Do not use WQ_MEM_RECLAIM flag for workqueueAnirudh Venkataramanan1-1/+1
[ Upstream commit 4d159f7884f78b1aacb99b4fc37d1e3cb1194e39 ] When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_release_driver_internal+0xfa/0x1c0 [ +0.000005] bus_remove_device+0x18a/0x260 [ +0.000007] device_del+0x2e5/0x650 [ +0.000005] ? __pfx_device_del+0x10/0x10 [ +0.000003] ? mutex_unlock+0x84/0xd0 [ +0.000004] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? _raw_spin_unlock+0x18/0x40 [ +0.000005] ice_unplug_aux_dev+0x52/0x70 [ice] [ +0.000160] ice_service_task+0x1309/0x14f0 [ice] [ +0.000134] ? __pfx___schedule+0x10/0x10 [ +0.000006] process_one_work+0x3b1/0x6c0 [ +0.000008] worker_thread+0x69/0x670 [ +0.000005] ? __kthread_parkme+0xec/0x110 [ +0.000007] ? __pfx_worker_thread+0x10/0x10 [ +0.000005] kthread+0x17f/0x1b0 [ +0.000005] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x29/0x50 [ +0.000009] </TASK> Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-15igc: return an error if the mac type is unknown in igc_ptp_systim_to_hwtstamp()Tom Rix1-5/+9
[ Upstream commit a2df8463e15c10a8a882090f3d7a760fdb7b189d ] clang static analysis reports drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of '+' is a garbage value [core.UndefinedBinaryOperatorResult] ktime_add_ns(shhwtstamps.hwtstamp, adjust); ^ ~~~~~~~~~~~~~~~~~~~~ igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp if the mac type is unknown. This should be treated as an error. Fixes: 81b055205e8b ("igc: Add support for RX timestamping") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18ixgbe: fix pci device refcount leakYang Yingliang1-5/+9
commit b93fb4405fcb5112c5739c5349afb52ec7f15c07 upstream. As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-14igb: Do not free q_vector unless new one was allocatedKees Cook1-2/+6
[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ] Avoid potential use-after-free condition under memory pressure. If the kzalloc() fails, q_vector will be freed but left in the original adapter->q_vector[v_idx] array position. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14igc: Set Qbv start_time and end_time to end_time if not being configured in GCLTan Tee Min1-1/+13
[ Upstream commit 72abeedd83982c1bc6023f631e412db78374d9b4 ] The default setting of end_time minus start_time is whole 1 second. Thus, if it's not being configured in any GCL entry then it will be staying at original 1 second. This patch is changing the start_time and end_time to be end_time as if setting zero will be having weird HW behavior where the gate will not be fully closed. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14igc: Lift TAPRIO schedule restrictionKurt Kanzenbach1-6/+17
[ Upstream commit a5fd39464a4081ce11c801d7e20c4551ba7cb983 ] Add support for Qbv schedules where one queue stays open in consecutive entries. Currently that's not supported. Example schedule: |tc qdisc replace dev ${INTERFACE} handle 100 parent root taprio num_tc 3 \ | map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ | queues 1@0 1@1 2@2 \ | base-time ${BASETIME} \ | sched-entry S 0x01 300000 \ # Stream High/Low | sched-entry S 0x06 500000 \ # Management and Best Effort | sched-entry S 0x04 200000 \ # Best Effort | flags 0x02 Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 72abeedd8398 ("igc: Set Qbv start_time and end_time to end_time if not being configured in GCL") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14igc: recalculate Qbv end_time by considering cycle timeTan Tee Min1-0/+15
[ Upstream commit 6d05251d537a4d3835959a8cdd8cbbbdcdc0c904 ] Qbv users can specify a cycle time that is not equal to the total GCL intervals. Hence, recalculation is necessary here to exclude the time interval that exceeds the cycle time. As those GCL which exceeds the cycle time will be truncated. According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of the list is reached, it will switch to the END_OF_CYCLE state and leave the gates in the same state until the next cycle is started. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14igc: Add checking for basetime less than zeroMuhammad Husaini Zulkifli1-0/+3
[ Upstream commit 3b61764fb49a6e147ac90d71dccdddc9d5508ba1 ] Using the tc qdisc command, the user can set basetime to any value. Checking should be done on the driver's side to prevent registering basetime values that are less than zero. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14igc: Use strict cycles for Qbv schedulingVinicius Costa Gomes1-9/+2
[ Upstream commit d8f45be01dd9381065a3778a579385249ed011dc ] Configuring strict cycle mode in the controller forces more well behaved transmissions when taprio is offloaded. When set this strict_cycle and strict_end, transmission is not enabled if the whole packet cannot be completed before end of the Qbv cycle. Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14igc: Enhance Qbv scheduling by using first flag bitVinicius Costa Gomes3-29/+151
[ Upstream commit db0b124f02ba68de6517ac303d431af220ccfe9f ] The I225 hardware has a limitation that packets can only be scheduled in the [0, cycle-time] interval. So, scheduling a packet to the start of the next cycle doesn't usually work. To overcome this, we use the Transmit Descriptor first flag to indicates that a packet should be the first packet (from a queue) in a cycle according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle in Intel Discrete I225/6 User Manual. But this only works if there was any packet from that queue during the current cycle, to avoid this issue, we issue an empty packet if that's not the case. Also require one more descriptor to be available, to take into account the empty packet that might be issued. Test Setup: Talker: Use l2_tai to generate the launchtime into packet load. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Test Result: Before: 1666000610127300000,1666000610127300096,96,621273 1666000610127400000,1666000610127400192,192,621274 1666000610127500000,1666000610127500032,32,621275 1666000610127600000,1666000610127600128,128,621276 1666000610127700000,1666000610127700224,224,621277 1666000610127800000,1666000610127800064,64,621278 1666000610127900000,1666000610127900160,160,621279 1666000610128000000,1666000610128000000,0,621280 1666000610128100000,1666000610128100096,96,621281 1666000610128200000,1666000610128200192,192,621282 1666000610128300000,1666000610128300032,32,621283 1666000610128400000,1666000610128301056,-98944,621284 1666000610128500000,1666000610128302080,-197920,621285 1666000610128600000,1666000610128302848,-297152,621286 1666000610128700000,1666000610128303872,-396128,621287 1666000610128800000,1666000610128304896,-495104,621288 1666000610128900000,1666000610128305664,-594336,621289 1666000610129000000,1666000610128306688,-693312,621290 1666000610129100000,1666000610128307712,-792288,621291 1666000610129200000,1666000610128308480,-891520,621292 1666000610129300000,1666000610128309504,-990496,621293 1666000610129400000,1666000610128310528,-1089472,621294 1666000610129500000,1666000610128311296,-1188704,621295 1666000610129600000,1666000610128312320,-1287680,621296 1666000610129700000,1666000610128313344,-1386656,621297 1666000610129800000,1666000610128314112,-1485888,621298 1666000610129900000,1666000610128315136,-1584864,621299 1666000610130000000,1666000610128316160,-1683840,621300 1666000610130100000,1666000610128316928,-1783072,621301 1666000610130200000,1666000610128317952,-1882048,621302 1666000610130300000,1666000610128318976,-1981024,621303 1666000610130400000,1666000610128319744,-2080256,621304 1666000610130500000,1666000610128320768,-2179232,621305 1666000610130600000,1666000610128321792,-2278208,621306 1666000610130700000,1666000610128322816,-2377184,621307 1666000610130800000,1666000610128323584,-2476416,621308 1666000610130900000,1666000610128324608,-2575392,621309 1666000610131000000,1666000610128325632,-2674368,621310 1666000610131100000,1666000610128326400,-2773600,621311 1666000610131200000,1666000610128327424,-2872576,621312 1666000610131300000,1666000610128328448,-2971552,621313 1666000610131400000,1666000610128329216,-3070784,621314 1666000610131500000,1666000610131500032,32,621315 1666000610131600000,1666000610131600128,128,621316 1666000610131700000,1666000610131700224,224,621317 After: 1666073510646200000,1666073510646200064,64,2676462 1666073510646300000,1666073510646300160,160,2676463 1666073510646400000,1666073510646400256,256,2676464 1666073510646500000,1666073510646500096,96,2676465 1666073510646600000,1666073510646600192,192,2676466 1666073510646700000,1666073510646700032,32,2676467 1666073510646800000,1666073510646800128,128,2676468 1666073510646900000,1666073510646900224,224,2676469 1666073510647000000,1666073510647000064,64,2676470 1666073510647100000,1666073510647100160,160,2676471 1666073510647200000,1666073510647200256,256,2676472 1666073510647300000,1666073510647300096,96,2676473 1666073510647400000,1666073510647400192,192,2676474 1666073510647500000,1666073510647500032,32,2676475 1666073510647600000,1666073510647600128,128,2676476 1666073510647700000,1666073510647700224,224,2676477 1666073510647800000,1666073510647800064,64,2676478 1666073510647900000,1666073510647900160,160,2676479 1666073510648000000,1666073510648000000,0,2676480 1666073510648100000,1666073510648100096,96,2676481 1666073510648200000,1666073510648200192,192,2676482 1666073510648300000,1666073510648300032,32,2676483 1666073510648400000,1666073510648400128,128,2676484 1666073510648500000,1666073510648500224,224,2676485 1666073510648600000,1666073510648600064,64,2676486 1666073510648700000,1666073510648700160,160,2676487 1666073510648800000,1666073510648800000,0,2676488 1666073510648900000,1666073510648900096,96,2676489 1666073510649000000,1666073510649000192,192,2676490 1666073510649100000,1666073510649100032,32,2676491 1666073510649200000,1666073510649200128,128,2676492 1666073510649300000,1666073510649300224,224,2676493 1666073510649400000,1666073510649400064,64,2676494 1666073510649500000,1666073510649500160,160,2676495 1666073510649600000,1666073510649600000,0,2676496 1666073510649700000,1666073510649700096,96,2676497 1666073510649800000,1666073510649800192,192,2676498 1666073510649900000,1666073510649900032,32,2676499 1666073510650000000,1666073510650000128,128,2676500 Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14net: add a helper to avoid issues with HW TX timestamping and SO_TXTIMEVladimir Oltean2-2/+2
[ Upstream commit 847cbfc014adafeac401e19e349b0fd524f201c3 ] As explained in commit 29d98f54a4fe ("net: enetc: allow hardware timestamping on TX queues with tc-etf enabled"), hardware TX timestamping requires an skb with skb->tstamp = 0. When a packet is sent with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp, so the drivers need to explicitly reset skb->tstamp to zero after consuming the TX time. Create a helper named skb_txtime_consumed() which does just that. All drivers which offload TC_SETUP_QDISC_ETF should implement it, and it would make it easier to assess during review whether they do the right thing in order to be compatible with hardware timestamping or not. Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14net: igc: use skb_csum_is_sctp instead of protocol checkXin Long1-13/+1
[ Upstream commit 609d29a9d2429a840a2f1f44e77b71d58e3e9a33 ] Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC checksum offload packet, and yet it also makes igc support SCTP CRC checksum offload for UDP and GRE encapped packets, just as it does in igb driver. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-21igb: Initialize mailbox message for VF resetTony Nguyen1-1/+1
commit de5dc44370fbd6b46bd7f1a1e00369be54a041c8 upstream. When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case. Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address") Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221212190031.3983342-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14i40e: Disallow ip4 and ip6 l4_4_bytesPrzemyslaw Patynowski1-5/+1
[ Upstream commit d64aaf3f7869f915fd120763d75f11d6b116424d ] Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or IP6 flow director filters. Flow director does not support filtering on l4 bytes for PCTYPEs used by IP4 and IP6 filters. Without this patch, user could create filters with l4_4_bytes fields, which did not do any filtering on L4, but only on L3 fields. Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Fix for VF MAC address 0Sylwester Dziedziuch1-0/+2
[ Upstream commit 08501970472077ed5de346ad89943a37d1692e9b ] After spawning max VFs on a PF, some VFs were not getting resources and their MAC addresses were 0. This was caused by PF sleeping before flushing HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for VF. Fix by adding a sleep after hw flush. Fixes: e4b433f4a741 ("i40e: reset all VFs in parallel when rebuilding PF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Fix not setting default xps_cpus after resetMichal Jaron1-1/+18
[ Upstream commit 82e0572b23029b380464fa9fdc125db9c1506d0a ] During tx rings configuration default XPS queue config is set and __I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is cleared and set again with default mapping only during queues build, it means after first setup or reset with queues rebuild. (i.e. ethtool -L <interface> combined <number>) After other resets (i.e. ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default maps cannot be set again. It results in cleared xps_cpus mapping until queues are not rebuild or mapping is not set by user. Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let the driver set xps_cpus to defaults again after it was cleared. Fixes: 6f853d4f8e93 ("i40e: allow XPS with QoS enabled") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14igb: Allocate MSI-X vector when testingAkihiko Odaki1-0/+2
[ Upstream commit 28e96556baca7056d11d9fb3cdd0aba4483e00d8 ] Without this change, the interrupt test fail with MSI-X environment: $ sudo ethtool -t enp0s2 offline [ 43.921783] igb 0000:00:02.0: offline testing starting [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 51.272202] igb 0000:00:02.0: testing shared interrupt [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 4 Loopback test (offline) 0 Link test (on/offline) 0 Here, "4" means an expected interrupt was not delivered. To fix this, route IRQs correctly to the first MSI-X vector by setting IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be masked. The interrupt test now runs properly with this change: $ sudo ethtool -t enp0s2 offline [ 42.762985] igb 0000:00:02.0: offline testing starting [ 50.141967] igb 0000:00:02.0: testing shared interrupt [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14e1000e: Fix TX dispatch conditionAkihiko Odaki1-2/+2
[ Upstream commit eed913f6919e253f35d454b2f115f2a4db2b741a ] e1000_xmit_frame is expected to stop the queue and dispatch frames to hardware if there is not sufficient space for the next frame in the buffer, but sometimes it failed to do so because the estimated maximum size of frame was wrong. As the consequence, the later invocation of e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer remained forever, resulting in a watchdog failure. This change fixes the estimated size by making it match with the condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to account for the following lines which determines the space requirement for not causing NETDEV_TX_BUSY: ``` /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); ``` This issue was found when running http-stress02 test included in Linux Test Project 20220930 on QEMU with the following commandline: ``` qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8 -drive if=virtio,format=raw,file=root.img,file.locking=on -device e1000e,netdev=netdev -netdev tap,script=ifup,downscript=no,id=netdev ``` Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08e100: Fix possible use after free in e100_xmit_prepareWang Hai1-4/+1
[ Upstream commit 45605c75c52c7ae7bfe902214343aabcfe5ba0ff ] In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free. Fixes: 5e5d49422dfb ("e100: Release skb when DMA mapping is failed in e100_xmit_prepare") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08e100: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-43/+49
[ Upstream commit 4140ff1ba06d3fc16afd518736940ab742886317 ] The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'e100_alloc()', GFP_KERNEL can be used because it is only called from the probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Link: https://lore.kernel.org/r/20210128210736.749724-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 45605c75c52c ("e100: Fix possible use after free in e100_xmit_prepare") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08iavf: Fix error handling in iavf_init_module()Yuan Can1-1/+8
[ Upstream commit 227d8d2f7f2278b8468c5531b0cd0f2a905b4486 ] The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") Fixes: 2803b16c10ea ("i40e/i40evf: Use private workqueue") Signed-off-by: Yuan Can <yuancan@huawei.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08iavf: remove redundant ret variableMinghao Chi1-7/+2
[ Upstream commit c3fec56e12678c3ad68084048a73818a7968d6b8 ] Return value directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 227d8d2f7f22 ("iavf: Fix error handling in iavf_init_module()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08fm10k: Fix error handling in fm10k_init_module()Yuan Can1-1/+9
[ Upstream commit 771a794c0a3c3e7f0d86cc34be4f9537e8c0a20c ] A problem about modprobe fm10k failed is triggered with the following log given: Intel(R) Ethernet Switch Host Interface Driver Copyright(c) 2013 - 2019 Intel Corporation. debugfs: Directory 'fm10k' with parent '/' already present! The reason is that fm10k_init_module() returns fm10k_register_pci_driver() directly without checking its return value, if fm10k_register_pci_driver() failed, it returns without removing debugfs and destroy workqueue, resulting the debugfs of fm10k can never be created later and leaks the workqueue. fm10k_init_module() alloc_workqueue() fm10k_dbg_init() # create debugfs fm10k_register_pci_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without remove debugfs and destroy workqueue Fix by remove debugfs and destroy workqueue when fm10k_register_pci_driver() returns error. Fixes: 7461fd913afe ("fm10k: Add support for debugfs") Fixes: b382bb1b3e2d ("fm10k: use separate workqueue for fm10k driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08i40e: Fix error handling in i40e_init_module()Shang XiaoJing1-1/+10
[ Upstream commit 479dd06149425b9e00477f52200872587af76a48 ] i40e_init_module() won't free the debugfs directory created by i40e_dbg_init() when pci_register_driver() failed. Add fail path to call i40e_dbg_exit() to remove the debugfs entries to prevent the bug. i40e: Intel(R) Ethernet Connection XL710 Network Driver i40e: Copyright (c) 2013 - 2019 Intel Corporation. debugfs: Directory 'i40e' with parent '/' already present! Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08ixgbevf: Fix resource leak in ixgbevf_init_module()Shang XiaoJing1-1/+9
[ Upstream commit 8cfa238a48f34038464b99d0b4825238c2687181 ] ixgbevf_init_module() won't destroy the workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Add destroy_workqueue() in fail path to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") Fixes: 40a13e2493c9 ("ixgbevf: Use a private workqueue to avoid certain possible hangs") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix flow-type by setting GL_HASH_INSET registersSlawomir Laba1-33/+38
[ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ] Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix VF hang when reset is triggered on another VFSylwester Dziedziuch2-11/+33
[ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ] When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix ethtool rx-flow-hash setting for X722Slawomir Laba2-8/+27
[ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ] When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-30i40e: Fix DMA mappings leakJan Sokolowski6-28/+74
[ Upstream commit aae425efdfd1b1d8452260a3cb49344ebf20b1f5 ] During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i40e: Fix set max_tx_rate when it is lower than 1 MbpsMichal Jaron1-6/+26
[ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ] While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i40e: Fix VF set max MTU sizeMichal Jaron1-0/+20
[ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ] Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28iavf: Fix set max MTU size with port VLAN and jumbo framesMichal Jaron1-2/+5
[ Upstream commit 399c98c4dc50b7eb7e9f24da7ffdda6f025676ef ] After setting port VLAN and MTU to 9000 on VF with ice driver there was an iavf error "PF returned error -5 (IAVF_ERR_PARAM) to our request 6". During queue configuration, VF's max packet size was set to IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN due to making some space for port VLAN as VF is not aware whether it's in a port VLAN. This mismatch in sizes caused ice to reject queue configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF to VF with GET_VF_RESOURCES msg but VF does not look at this. In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu received from pf with GET_VF_RESOURCES msg to make vf's max_frame_size dependent from pf. Add check if received max_mtu is not in eligible range then set it to IAVF_MAX_RXBUFFER. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28iavf: Fix bad page stateNorbert Zulinski1-2/+2
[ Upstream commit 66039eb9015eee4f7ff0c99b83c65c7ecb3c8190 ] Fix bad page state, free inappropriate page in handling dummy descriptor. iavf_build_skb now has to check not only if rx_buffer is NULL but also if size is zero, same thing in iavf_clean_rx_irq. Without this patch driver would free page that will be used by napi_build_skb. Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28iavf: Fix cached head and tail value for iavf_get_tx_pendingBrett Creeley1-1/+4
[ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15i40e: Fix kernel crash during module removalIvan Vecera1-1/+4
[ Upstream commit fb8396aeda5872369a8ed6d2301e2c86e303c520 ] The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15ice: use bitmap_free instead of devm_kfreeMichal Swiatkowski1-1/+1
[ Upstream commit 59ac325557b6c14f1f793b90d3946bc145ffa085 ] pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be used to free this memory. Fixes: 78b5713ac1241 ("ice: Alloc queue management bitmaps and arrays dynamically") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounterJacob Keller1-13/+46
[ Upstream commit 25d7a5f5a6bb15a2dae0a3f39ea5dda215024726 ] The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne <spayne@aurora.tech> Reported-by: Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ice: xsk: prohibit usage of non-balanced queue idMaciej Fijalkowski1-0/+6
[ Upstream commit 5a42f112d367bb4700a8a41f5c12724fde6bfbb9 ] Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31ice: xsk: Force rings to be sized to power of 2Maciej Fijalkowski1-0/+8
[ Upstream commit 296f13ff3854535009a185aaf8e3603266d39d94 ] With the upcoming introduction of batching to XSK data path, performance wise it will be the best to have the ring descriptor count to be aligned to power of 2. Check if ring sizes that user is going to attach the XSK socket fulfill the condition above. For Tx side, although check is being done against the Tx queue and in the end the socket will be attached to the XDP queue, it is fine since XDP queues get the ring->count setting from Tx queues. Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220125160446.78976-3-maciej.fijalkowski@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25igb: Add lock to avoid data raceLin Ma2-1/+13
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream. The commit c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834ce541 ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady1-1/+3
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream. When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ice: Ignore EEXIST when setting promisc modeGrzegorz Siwik1-1/+1
commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream. Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25iavf: Fix adminq error handlingPrzemyslaw Patynowski1-2/+13
commit 419831617ed349992c84344dbd9e627f9e68f842 upstream. iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fixes: d358aa9a7a2d ("i40evf: init code and hardware support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-21iavf: Fix max_rate limitingPrzemyslaw Patynowski2-2/+24
[ Upstream commit ec60d54cb9a3d43a02c5612a03093c18233e6601 ] Fix max_rate option in TC, check for proper quanta boundaries. Check for minimum value provided and if it fits expected 50Mbps quanta. Without this patch, iavf could send settings for max_rate limiting that would be accepted from by PF even the max_rate option is less than expected 50Mbps quanta. It results in no rate limiting on traffic as rate limiting will be floored to 0. Example: tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \ 2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \ max_rate 50Mbps 500Mbps 500Mbps Should limit TC0 to circa 50 Mbps tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \ 2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \ max_rate 0Mbps 100Kbit 500Mbps Should return error Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jun Zhang <xuejun.zhang@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski1-0/+4
[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ] Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-03ice: do not setup vlan for loopback VSIMaciej Fijalkowski1-3/+5
commit cc019545a238518fa9da1e2a889f6e1bb1005a63 upstream. Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-03ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)Maciej Fijalkowski1-1/+2
commit 283d736ff7c7e96ac5b32c6c0de40372f8eb171e upstream. Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames. Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-29ixgbe: Add locking to prevent panic when setting sriov_numvfs to zeroPiotr Skajewski3-0/+10
[ Upstream commit 1e53834ce541d4fe271cdcca7703e50be0a44f8a ] It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned") Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29i40e: Fix erroneous adapter reinitialization during recovery processDawid Lukwinski1-8/+5
[ Upstream commit f838a63369818faadec4ad1736cfbd20ab5da00e ] Fix an issue when driver incorrectly detects state of recovery process and erroneously reinitializes interrupts, which results in a kernel error and call trace message. The issue was caused by a combination of two factors: 1. Assuming the EMP reset issued after completing firmware recovery means the whole recovery process is complete. 2. Erroneous reinitialization of interrupt vector after detecting the above mentioned EMP reset. Fixes (1) by changing how recovery state change is detected and (2) by adjusting the conditional expression to ensure using proper interrupt reinitialization method, depending on the situation. Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 21:46:10 +0300