summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2015-02-09i40e: Use even more ARQ descriptorsMitch Williams1-2/+2
When enabling 64 VFs and loading the VF driver in the host kernel, we can easily overrun the PF's admin receive queue. Double the size of this queue, and increase the work limit to allow the PF to handle more requests in a single pass through the service task. Change-ID: I0efbbdc61954bffad422a2f33c4b948a59370bf5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: delay after VF resetMitch Williams1-6/+6
Delay a minimum of 10ms after VF reset, to allow the hardware's internal FIFOs to flush. Change-ID: I8a02ddb28c9f0d7303a1eb21d0b2443e5b4c1cda Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: avoid use of uninitialized v_budget in i40e_init_msixJohn W Linville1-5/+5
This I40E_FCOE block increments v_budget before it has been initialized, then v_budget gets overwritten a few lines later. This patch just reorders the code hunks in what I believe was the intended sequence. Coverity: CID 1260099 Signed-off-by: John W Linville <linville@tuxdriver.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: i40e_fcoe.c: Remove unused functionRickard Strandqvist1-9/+0
Remove the function i40e_rx_is_fip() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: add Tx anti spoofing supportDon Skidmore4-0/+47
This patch enables the ethertype Anti-Spoofing feature for affected devices. It is configured such that LLDP packets sent by a VF will be dropped. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: combine all of the tasks into a single service taskEmil Tantilov2-66/+87
This change combines the reset and watchdog tasklets into a single task. The advantage of this is that we can avoid multiple schedules of the reset task when we have a reset event needed due to either the mailbox going down or transmit packets being present on a link down. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: rewrite watchdog task to function similar to igbvfEmil Tantilov2-75/+113
This patch cleans up the logic dealing with link down/up by breaking down the link detection and up/down events into separate functions - similar to how these events are handled in other drivers. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: Add code to check for Tx hangEmil Tantilov2-19/+115
This patch adds code to allow for Tx hang checking. The idea is to provide more robust debug info in the event of a transmit unit hang. Similar to the logic in ixgbe. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: Fix ordering of shutdown to correctly disable Rx and TxEmil Tantilov1-21/+17
This patch updates the ordering of the shutdown path so that we attempt to shutdown the rings more gracefully. Basically the big changes are that we shutdown the main Rx filter in the case of Rx and we set the carrier_off state in the case of Tx so that packets stop being delivered from outside the driver. Then we shut down interrupts and NAPI. Finally we stop the rings from performing DMA and clean them. This is a bit more graceful than the previous path. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: set vlan_features in a single write instead of several ORsEmil Tantilov1-5/+5
Clean up the setting of vlan_features by enabling all features at once. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: add VXLAN offload support for X550 devicesDon Skidmore4-2/+113
Add support VXLAN receive checksum offload in X550 hardware. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: Cleanup probe to remove redundant attempt to ID PHYDon Skidmore1-3/+0
We always identify the PHY in our reset_hw path anyway so there is no need to do it in get_invariants(). The reason I even noticed this is that for new hardware (X550em) we don't assign some methods until later in probe and calling phy.ops.read_reg could lead to a panic. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: cleanup redundant default method set_rxpbaDon Skidmore1-1/+0
My original patch 6a14ee0cfb19 "ixgbe: Add X550 support function pointers" accidental set a default value for this structure member twice. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: fix setting port VLANEmil Tantilov1-5/+8
This patch fixes couple of issues introduced by commit 2b509c0cd292 ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan") - fix setting of the VLAN inside ixgbe_enable_port_vlan() - disable the "hide VLAN" bit in PFQDE when port VLAN is disabled Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: add RSS support for X550Emil Tantilov2-0/+45
X550 provides RSS registers for configuring RSS per VF. This patch introduces ixgbevf_setup_vfmrqc() which uses the VFRETA, VFRSSRK and VFMRQC registers to configure RSS on X550. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: enable multiple queue supportEmil Tantilov2-3/+20
This patch enables multiple queues and RSS support for the VF. Maximum of 2 queues are supported due to available vectors. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: allow multiple queues in SRIOV modeEmil Tantilov1-3/+0
ixgbe_set_sriov_queues() has the logic to allow multiple queues, this patch just removes the limitation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: cleanup sparse errors in new ixgbe_x550.c fileDon Skidmore1-30/+35
This patch cleans up prototypes that should have been defined as static. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06fm10k: Resolve compile warnings with W=1Matthew Vick2-6/+2
Fix two cases where variables are being set but not used. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh<Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06fm10k: Validate VLAN ID in fm10k_update_xc_addr_pfMatthew Vick1-5/+2
Currently, fm10k_update_xc_addr_pf has an issue where it does not properly drop the upper-most four bits of the VLAN ID due to type promotion. Resolve the issue not by masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-11/+14
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellinkRoopa Prabhu1-1/+1
bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31ixgbevf: Fix checksum error when using stacked vlanToshiaki Makita1-2/+2
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbevf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use first->protocol instead of skb->protocol to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31ixgbe: Fix checksum error when using stacked vlanToshiaki Makita1-1/+1
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbe_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31igbvf: Fix checksum error when using stacked vlanToshiaki Makita1-8/+11
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, igbvf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23net: e1000e: support txtd update delay via xmit_moreFlorian Westphal1-10/+15
Don't update Tx tail descriptor if queue hasn't been stopped and we know at least one more skb will be sent right away. Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23net: e1000: support txtd update delay via xmit_moreFlorian Westphal1-6/+9
Don't update Tx tail descriptor if we queue hasn't been stopped and we know at least one more skb will be sent right away. Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: Indicate failure on vf reset for empty mac addressAlexander Graf1-2/+6
Commit 5ac6f91d changed the igb driver to expose a zero (empty) mac address to the VF on reset rather than a random one. However, that behavioral change also requires igbvf driver changes which can be hard especially when we want to talk to proprietary guest OSs. Looking at the code previous to the commit in Linux that made igbvf work with empty mac addresses (8d56b6d), we can see that on reset failure the driver will try to generate a new mac address with both the old and the new code. Furthermore, ixgbe does send reset failure when it detects an empty mac address (35055928c). So I think it's safe to make igb behave the same. With this patch I can successfully run a Windows 8.1 guest with an empty mac address and an assigned igbvf device that has no mac address set by the host. If anyone is aware of a guest driver that chokes on NACK returns of VF RESET commands, please speak up. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23fm10k: Increase the timeout for the data path resetMatthew Vick1-1/+1
Based on feedback from the hardware team, 100us is too short of a time to wait for the data path reset to complete and the recommendation is to increase this timeout to 150us. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23fm10k: Check tunnel header length in encap offloadJoe Stringer1-0/+6
fm10k supports up to 184 bytes of inner+outer headers. Add an initial check to fail encap offload if these are too large. Signed-off-by: Joe Stringer <joestringer@nicira.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23net/fm10k: Avoid double setting of NETIF_F_SG for the HW encapsulation ↵Or Gerlitz1-7/+6
feature mask The networking core does it for the driver during registration time. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: enable auxiliary PHC functions for the i210Richard Cochran3-6/+276
The i210 device offers a number of special PTP Hardware Clock features on the Software Defined Pins (SDPs). This patch adds support for two of the possible functions, namely time stamping external events, and periodic output signals. The assignment of PHC functions to the four SDP can be freely chosen by the user. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: enable internal PPS for the i210Richard Cochran2-5/+45
The i210 device can produce an interrupt on the full second. This patch allows using this interrupt to generate an internal PPS event for adjusting the kernel system time. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: serialize access to the time sync interrupt registersRichard Cochran1-3/+7
The time sync related interrupt registers may be manipulated from different contexts. This patch protects the registers from being asynchronously changed by the reset function. Also, the patch removes a misleading comment. The reset function is disabling a bunch of functions, not enabling them. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: refactor time sync interrupt handlingRichard Cochran1-30/+19
The code that handles the time sync interrupt is repeated in three different places. This patch refactors the identical code blocks into a single helper function. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23fm10k: Clean-up page reuse codeAlexander Duyck1-17/+17
This patch cleans up the page reuse code getting it into a state where all the workarounds needed are in place as well as cleaning up a few minor oversights such as using __free_pages instead of put_page to drop a locally allocated page. It also cleans up how we clear the descriptor status bits. Previously they were zeroed as a part of clearing the hdr_addr. However the hdr_addr is a 64 bit field and 64 bit writes can be a bit more expensive on on 32 bit systems. Since we are no longer using the header split feature the upper 32 bits of the address no longer need to be cleared. As a result we can just clear the status bits and leave the length and VLAN fields as-is which should provide more information in debugging. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: Clean-up page reuse codeAlexander Duyck1-19/+16
This patch cleans up the page reuse code getting it into a state where all the workarounds needed are in place as well as cleaning up a few minor oversights such as using __free_pages instead of put_page to drop a locally allocated page. It also cleans up how we clear the descriptor status bits. Previously they were zeroed as a part of clearing the hdr_addr. However the hdr_addr is a 64 bit field and 64 bit writes can be a bit more expensive on on 32 bit systems. Since we are no longer using the header split feature the upper 32 bits of the address no longer need to be cleared. As a result we can just clear the status bits and leave the length and VLAN fields as-is which should provide more information in debugging. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23e1000e: Fix 82572EI that has no hardware timestamp supportMathias Koehrer1-2/+3
With the Intel 82527EI (driver: e1000e) there is an issue when running the ptpd2 program, that leads to a kernel oops. The reason is here that in e1000_xmit_frame() a work queue will be scheduled that has not been initialized in this case. The work queue "tx_hwstamp_work" will only be initialized if adapter->flags & FLAG_HAS_HW_TIMESTAMP set. This check is missing in e1000_xmit_frame(). The following patch adds the missing check. Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23e1000: fix time comparisonAsaf Vertz1-1/+2
To be future-proof and for better readability the time comparisons are modified to use time_after_eq() instead of plain, error-prone math. Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e/i40evf: Bump i40e and i40evf versionsSravanthi Tangeda2-2/+2
Bump i40e to 1.2.6 and i40evf to 1.2.0 version. Change-ID: Ice127eee3a5a5d1b8765d83cff8c30f9f3b1bc32 Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: Support for NPAR iSCSI partition with DCBNeerav Parikh4-18/+62
Add parsing and reporting of iSCSI capability for a given device or function. Also add support for iSCSI partition type with DCB in NPAR mode. In this mode it is expected that software would configure both the LAN and iSCSI traffic classes for the iSCSI partition; whereas all the NIC type partitions will use LAN TC (TC0) only. Hence, the patch enables querying of DCB configuration in MFP mode and configures TCs for iSCSI partition type. Though NIC type partitions may not have more than 1 TC enabled for them the port may have multiple TCs enabled and hence I40E_FLAG_DCB_ENABLED will be set/reset on all the partitions based on number of TCs on the port. This is required as in DCB environment it is expected that all traffic will be priority tagged. Change-ID: I8c6e1cfd46c46d8a39c57d9020d9ff8d42ed8a7d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: when Rx timestamps disabled set specific modeJacob Keller1-11/+17
Instead of leaving the Rx timestamps in the same mode as before if we disable the Rx logic, we can set it into a mode that has the fewest possible timestamps generated. To do this, select only V1 mode, but do not enable UDP packet recognition. This should eliminate all (or at least almost all) Rx timestamps, since V1 packets are always over UDP. Change-ID: If847288e0030a716e059c4c33ab114f2cf038f05 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: use same check for Rx hang as for Rx timestampsJacob Keller1-1/+6
It's possible that the user configured only Tx hardware timestamping, and thus we might be receiving PTP traffic which we timestamp but which software never reads. In this case we don't want to check for Rx timestamp hang, because we already know that software won't be handling them. Thus, we add the same check against pf->ptp_rx as we have in the Rx timestamp code path. Change-ID: I66486c8dba307facbff8eace4e52e2f083789d1b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: AQ API updates for new commandsShannon Nelson2-10/+126
Add lldp control commands, add oem ocsd and ocbb commands. Change-ID: I89eba2bd02013d0a44e1ce900559c54bb15f4a66 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: AQ API updatesJeff Kirsher2-10/+10
Fix up NVM config read and write data structs. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: add more struct size checksShannon Nelson2-0/+86
Add struct size checks to many of the indirect structs and a few command structs that were left out previously. Change-ID: I7810b9af0f04e3ced670639f8671daf7df9b3f4d Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: Issue "Stop LLDP" command for firmware older than v4.3Neerav Parikh1-0/+10
Disable firmware LLDP agent for NICs with firmware version lower than v4.3. Added a message when driver disables the firmware LLDP agent on such NICs. Change-ID: Ia8abf89439c70cb50e23db82753d7d282265506b Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: check I40E_FLAG_PTP before handling Tx or Rx timestampsJacob Keller2-1/+11
We should not be doing Tx or Rx timestamps if we do not have PTP enabled. Add checks to ensure that we don't attempt to handle any PTP related timestamping code if we have not enabled PTP on that PF. Change-ID: I4335942ae2d5c5f91abfdbeeea02bcace49e7677 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e: only enable PTP interrupt cause if PTP is enabledJacob Keller1-4/+7
We should not blindly enable the PTP interrupt flags for all PFs. We should only enable the PTP interrupt in PFs which have enabled PTP. Change-ID: I051a17cae4c199a2f3cf7852266e27eda6630525 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-16i40e/i40evf: Bump i40e/i40evf versionsCatherine Sullivan2-2/+2
Bump i40e to 1.2.5 and i40evf to 1.0.7. Change-ID: I622556829056e3ed42d3b9d285fc5ffb693b21cc Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 16:19:34 +0300