summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2015-04-15fm10k: expose tx_timeout_count as an ethtool statJeff Kirsher1-0/+2
Named it tx_hang_count to differentiate it from tx_hwtstamp_timeout. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: only increment tx_timeout_count in Tx hang pathJeff Kirsher1-1/+0
We were incrementing the tx_timeout_count for both the Tx hang and then for all reset flows. Instead, we should only increment tx_timeout_count in the Tx hang path, so that our Tx hang counter does not increment when it was not caused by a Tx hang. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: remove extraneous "Reset interface" messageJeff Kirsher1-1/+0
Since we already print this message when a reset is requested via the RESET_REQUESTED flag, we do not need to print it before setting the flag. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: separate PF only stats so that VF does not display themJeff Kirsher1-14/+37
This patch resolves an issue with ethtool stats displaying useless values on the VF, because some stats simply have no meaning to the VF. Resolve this by splitting these out into PF_STATS and only showing them if we aren't the VF. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: use hw->mac.max_queues for statsJeff Kirsher2-8/+12
Even though it shouldn't strictly matter, don't count queue stats higher than the max_queues value stored for this mac. This ensures that we don't attempt to check queues which don't belong to use in VFs. This shouldn't be a visible change, as the VFs should see zero for queues which don't belong to them. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: only show actual queues, not the maximum in hardwareJeff Kirsher1-2/+3
Currently, we show statistics for all 128 queues, even though we don't necessarily have that many queues available especially in the VF case. Instead, use the hw->mac.max_queues value, which tells us how many queues we actually have, rather than the space for the rings we allocated. In this way, we prevent dumping statistics that are useless on the VF. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: allow creation of VLAN on default vidJeff Kirsher1-4/+4
Previously, the user was not allowed to create a VLAN interface on top of the switch default vid. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: fix unused warningsJeff Kirsher7-37/+35
The were several functions which had parameters which were never or sometimes used in functions. To resolve possible compiler warnings, use __always_unused or __maybe_unused kernel macros to resolve. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: Add netconsole supportJeff Kirsher3-0/+28
This change adds a function called "fm10k_netpoll" that's used to define "ndo_poll_controller" in "fm10k_netdev_ops". This is required to enable support for "netconsole" in fm10k. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: Have the VF get the default VLAN during initJeff Kirsher1-1/+5
Currently, the VFs do not read the default VLAN during initialization, so they will not be able to indicate untagged frames properly. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: Correct spelling mistakeJeff Kirsher1-2/+2
Corrected a spelling mistake that was found over time. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-15fm10k: Remove redundant rx_errors in ethtoolJeff Kirsher3-7/+4
Output of ethtool was reporting 2 rx_errors entries. This change removes one of the redundant entries. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-15fm10k: Corrected an error in Tx statisticsJeff Kirsher1-2/+2
The function collecting Tx statistics was actually using values from the RX ring. Thus, Tx and Rx statistics values reported by "ifconfig" will return identical values. This change corrects this error and the Tx statistics is now reading from the Tx ring. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-13e1000e: Move pm_qos_req to e1000e adapterThomas Graf2-4/+5
e1000e is the only driver requiring pm_qos_req, instead of causing every device to waste up to 240 bytes. Allocate it for the specific driver. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-11ixgbevf: Add the appropriate ethtool ops to query RSS indirection table and keyVlad Zolotarov1-0/+69
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options for VF devices. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add RSS Key query codeVlad Zolotarov4-0/+57
Add the ixgbevf_get_rss_key() function that queries the PF for an RSS Random Key using a new VF-PF channel IXGBE_VF_GET_RSS_KEY command. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add GET_RSS_KEY command to VF-PF channel commands setVlad Zolotarov2-0/+22
For 82599 and x540 VFs and PF share the same RSS Key. Therefore we will return the same RSS key for all VFs. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add a RETA query codeVlad Zolotarov5-1/+80
We will currently support only 82599 and x540 devices. Support for other devices will be added later. - Added a new API version support. - Added the query implementation in the ixgbevf. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add a RETA query command to VF-PF channel APIVlad Zolotarov2-0/+39
Add this new command for 82599 and x540 devices only. Support for other devices will be added later. 82599 and x540 VFs and PF share the same RSS redirection table (RETA). Therefore we just return it for all VFs. For 82599 and x540 RETA table is an array of 32 registers (128 bytes) and the maximum number of registers that may be delivered in a single VF-PF channel command is 15. On the other hand VFs of these devices can be configured to have up to 4 RSS queues. Therefore we will "compress" the RETA by transferring only 2 bits per entry and thereby it will take only 8 registers (DWORDS) to transfer the whole VF RETA. Thus this patch does the following: - Adds a new API version (to specify a new commands set). - Adds the IXGBE_VF_GET_RETA command to the VF-PF commands set. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add a new netdev op to allow/prevent a VF from querying an RSS infoVlad Zolotarov4-2/+40
Implements the new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key. This patch limits the new feature support to 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Add the appropriate ethtool ops to query RSS indirection table and keyVlad Zolotarov3-1/+44
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbe: Refactor the RSS configuration codeVlad Zolotarov2-44/+112
This patch is a preparation for enablement of ethtool RSS indirection table and hash key querying. We don't want to read registers every time the RSS info is queried. Therefore we will store its current content in the arrays in the adapter struct and will read it from there (instead of from registers) when requested. Will change the code that writes the indirection table and hash key into the HW registers to take its content from these arrays. This will also simplify the indirection table updating ethtool callback implementation in the future. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: Drop unnecessary call to rcu_barrierAlexander Duyck1-2/+0
The ixgbe driver hasn't used call_rcu to free the rings for some time now. Since that is the case the call to rcu_barrier can be dropped since calls to kfree_rcu don't require it. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: Remove NETIF_F_HW_VLAN_CTAG_FILTER from hw_featuresAlexander Duyck1-1/+1
This change makes it so that the HW_VLAN_CTAG_FILTER bit is not falsely advertised as being a feature that can be toggled on ixgbe parts. The driver was setting the bit in features and letting it be inherited by hw_features, however the driver was actually ignoring the value of the bit and just assuming it was always set. As a result VLAN filtering was always enabled which is a requirement for SR-IOV, VMDq, DCB, FCoE, and possibly other features within the adapters. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: adds x550 specific FCoE offloadsVasu Dev3-27/+107
Adds x550 specific FCoE offloads for DDP context programming and increased DDP exchanges. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: add support for X550 source_address_prunningDon Skidmore3-0/+77
This patch will enable X550 Source Address Prunning for VEPA bridge mode. This requires that we also have replication enabled as well, while in this mode. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: add new bridge mode support function.Don Skidmore1-16/+34
This patch gathers together all the logic needed to configure bridge modes. Currently that it is rather simple but this is really laying the ground work for future X550 feature enhancement. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-10ixgbe: Move bridge mode from flag to variableDon Skidmore3-19/+20
We are currently storing our BRIDGE_MODE as a bit in our adapter flags. This patch will store the actual mode instead which minimizes obfuscation and makes following patches for X550 simpler. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-09e100: Use dma_rmb/wmb where appropriateAlexander Duyck1-3/+3
Reduce the CPU overhead for transmit and receive by using lightweight dma_ barriers instead of full barriers where they are applicable. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09i40e/i40evf: Use dma_rmb where appropriateAlexander Duyck2-4/+4
Update i40e and i40evf to use dma_rmb. This should improve performance by decreasing the barrier overhead on strong ordered architectures. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-08e1000, e1000e: Use dma_rmb instead of rmb for descriptor read orderingAlexander Duyck2-7/+7
This change replaces calls to rmb with dma_rmb in the case where we want to order all follow-on descriptor reads after the check for the descriptor status bit. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03i40e: Bump to version 1.3.1Catherine Sullivan1-2/+2
Bump. Change-ID: I7dc88baa33264e5919bc938adf76706573209432 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: Refactor VF RSS codeAnjali Singhai Jain1-32/+11
Refactor VF RSS code to allow RSS on a single queue and eliminate the need for the next_queue function. Change-ID: I9253bad96b7f542ee7036e15636db0e5d58d8ef2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: protect VLAN filter listMitch Williams1-2/+22
The MAC filter list is protected by a critical task bit, and the VLAN list should be protected as well. This prevents list corruption if the watchdog happens to run at the same time as a VLAN filter is being added or deleted. Change-ID: Ia4867cebbbb046a1f38012771b288a634ca5882b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Communicate VSI id in place of VSI index to the VFsAnjali Singhai Jain4-53/+76
This does not affect the Virtual channel API as such but it changes the meaning of what is communicated to the VSI resource struct as vsi_id. Earlier vsi_idx was being passed in, which was the index in the PF's VSI array. Now we pass vsi_id as communicated by the FW to the driver. This will help with future expansion of VF and FW communication. With this in place now the VF and Virtual channel driver change to move over to VSI id use is complete and is validated. Change-ID: I14246ef82b3b3dc1fa76291d2dd0c05d12cedb7c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: stop flow director on shutdownMitch Williams1-0/+2
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: Ib98060d6352ec595ab9a78bfe252675a9fa5d8bc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: fix up VXLAN messagesShannon Nelson1-19/+19
When the VXLAN ports are added and removed, the messaging was giving some bogus index info, the port was always '0' for the delete, and the message text style didn't match other messages in the driver. Also, there was an over-use of the tertiary statement which made reading a little harder than necessary. Change-ID: Ie805182a697b8b4c12024403ada87fd4e4fa2358 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Don't register/de-register apps on NIC partitions in MFP modeNeerav Parikh1-0/+8
Do not register or try to de-register DCB applications with the DCBNL layer in case of NIC partitions when adapter is in MFP mode. Change-ID: I603d042a61983a6562be471c6a2b181572504118 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: Set Ethernet protocol correctly when Tx VLAN offloads are disabledGreg Rose2-0/+27
If transmit VLAN HW offloads are disabled then the network stack sends up an skb with the protocol set to 8021q. In that case to get the correct checksum offloads we have to reset the skb protocol to the encapsulated ethertype. Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: warn at the right timeMitch Williams1-3/+2
The call to pci_disable_sriov got moved, but the message about not disabling VFs didn't move. So move it. While we're at, reword the message a bit to make it more consistent with other driver messages. Change-ID: I17d3e15e4fcfd5c9431a96ecb0117d728d3da18b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: fix invalid void return in FCoE codeJesse Brandeburg1-2/+1
A function was calling i40e_tx_map with return, but tx_map returns void, and the caller returns void, so just drop the return, and everything is good. Change-ID: I53fc676d517864761e7cbb8ca83f1ef0c15b1f8f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: fix bug when skb allocation failsJesse Brandeburg2-2/+8
If the skb allocation fails we should not continue using the skb pointer. Breaking out at the point of failure means that at the next RX interrupt the driver will try the allocation again. Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Change some memcpys to struct assignmentsJesse Brandeburg1-11/+8
Several memcpys are not necessary and can be changed to structure assignments. Struct assignments are always type safe so this is preferable. Change-ID: I7daf45a4b5e799c686b9d5c8ba9db047584ab82b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Print some more info to help figure out the cause of HMC errorAnjali Singhai Jain1-0/+3
HMC_ERRORINFO and HMC_ERRORDATA helps explain the cause of HMC error. Change-ID: I053bbc175a5f4c5c3e9ec2ea7400d5c56aaa4ec1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: validate VSI param from VFsMitch Williams1-0/+2
Validate that the VF has sent us a valid VSI index before actually using that index. Without this code, a malicious or buggy VF driver could panic the host by sending an invalid index into the VSI array. Change-ID: I66a177687a0dcc281ec83e714d3813d70d18c8b4 Reported-by: Nick Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: Fix Outer UDP RX checksum codeAnjali Singhai Jain1-11/+13
Inner protocol being UDP should not stop us from verifying Outer UDP checksum correctness. If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP checksum check. If the packet has zero checksum, skip checksum check. Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-01ptp: ixgbe: use helpers for converting ns to timespec.Richard Cochran1-5/+2
This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01ptp: igb: use helpers for converting ns to timespec.Richard Cochran1-5/+2
This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01ptp: e1000e: use helpers for converting ns to timespec.Richard Cochran1-3/+1
This patch changes the driver to use ns_to_timespec64() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ethernet: Use bool function returns of true/false instead of 1/0Joe Perches1-2/+2
Use bool constants as the return values instead of 1 and 0. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 22:35:17 +0300