summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2023-06-14i40e: fix build warnings in i40e_alloc.hGreg Kroah-Hartman1-11/+6
Not upstream as it was fixed in a much larger api change in newer kernels. gcc-13 rightfully complains that enum is not the same as an int, so fix up the function prototypes in i40e_alloc.h to be correct, solving a bunch of build warnings. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30igb: fix bit_shift to be in [1..8] rangeAleksandr Loktionov1-2/+2
[ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ] In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ixgbe: Enable setting RSS table to default valuesJoe Damato1-9/+10
[ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ] ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported by RSS. The driver should return the smaller of either: - The maximum number of RSS queues the device supports, OR - The number of RX queues configured Prior to this change, running `ethtool -X $iface default` fails if the number of queues configured is larger than the number supported by RSS, even though changing the queue count correctly resets the flowhash to use all supported queues. Other drivers (for example, i40e) will succeed but the flow hash will reset to support the maximum number of queues supported by RSS, even if that amount is smaller than the configured amount. Prior to this change: $ sudo ethtool -L eth1 combined 20 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 20 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 24: 8 9 10 11 12 13 14 15 32: 0 1 2 3 4 5 6 7 ... You can see that the flowhash was correctly set to use the maximum number of queues supported by the driver (16). However, asking the NIC to reset to "default" fails: $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this change, the flowhash can be reset to default which will use all of the available RSS queues (16) or the configured queue count, whichever is smaller. Starting with eth1 which has 10 queues and a flowhash distributing to all 10 queues: $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 ... Increasing the queue count to 48 resets the flowhash to distribute to 16 queues, as it did before this patch: $ sudo ethtool -L eth1 combined 48 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Due to the other bugfix in this series, the flowhash can be set to use queues 0-5: $ sudo ethtool -X eth1 equal 5 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 0 1 2 8: 3 4 0 1 2 3 4 0 16: 1 2 3 4 0 1 2 3 ... Due to this bugfix, the flowhash can be reset to default and use 16 queues: $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ixgbe: Allow flow hash to be set via ethtoolJoe Damato1-2/+2
[ Upstream commit 4f3ed1293feb9502dc254b05802faf1ad3317ac6 ] ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool because the ethtool code in the kernel passes a non-zero value for hfunc that ixgbe should allow. When ethtool is called with `ETHTOOL_SRXFHINDIR`, `ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted. When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should also be accepted. Before this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 24: 4 5 6 7 8 9 0 1 ... Fixes: 1c7cf0784e4d ("ixgbe: support for ethtool set_rxfh") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26e1000e: Disable TSO on i219-LM card to increase speedSebastian Basierski1-25/+26
[ Upstream commit 67d47b95119ad589b0a0b16b88b1dd9a04061ced ] While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe. Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26i40e: fix i40e_setup_misc_vector() error handlingAleksandr Loktionov1-1/+4
[ Upstream commit c86c00c6935505929cc9adb29ddb85e48c71f828 ] Add error handling of i40e_setup_misc_vector() in i40e_rebuild(). In case interrupt vectors setup fails do not re-open vsi-s and do not bring up vf-s, we have no interrupts to serve a traffic anyway. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26i40e: fix accessing vsi->active_filters without holding lockAleksandr Loktionov1-2/+2
[ Upstream commit 8485d093b076e59baff424552e8aecfc5bd2d261 ] Fix accessing vsi->active_filters without holding the mac_filter_hash_lock. Move vsi->active_filters = 0 inside critical section and move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical section to ensure the new filters from other threads can be added only after filters cleaning in the critical section is finished. Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05i40e: fix registers dump after run ethtool adapter self testRadoslaw Tyl2-6/+7
[ Upstream commit c5cff16f461a4a434a9915a7be7ac9ced861a8a4 ] Fix invalid registers dump from ethtool -d ethX after adapter self test by ethtool -t ethY. It causes invalid data display. The problem was caused by overwriting i40e_reg_list[].elements which is common for ethtool self test and dump. Fixes: 22dd9ae8afcc ("i40e: Rework register diagnostic") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230328172659.3906413-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05igb: revert rtnl_lock() that causes deadlockLin Ma1-2/+0
commit 65f69851e44d71248b952a687e44759a7abb5016 upstream. The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds rtnl_lock to eliminate a false data race shown below (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] The above race will never happen and the extra rtnl_lock causes deadlock below [ 141.420169] <TASK> [ 141.420672] __schedule+0x2dd/0x840 [ 141.421427] schedule+0x50/0xc0 [ 141.422041] schedule_preempt_disabled+0x11/0x20 [ 141.422678] __mutex_lock.isra.13+0x431/0x6b0 [ 141.423324] unregister_netdev+0xe/0x20 [ 141.423578] igbvf_remove+0x45/0xe0 [igbvf] [ 141.423791] pci_device_remove+0x36/0xb0 [ 141.423990] device_release_driver_internal+0xc1/0x160 [ 141.424270] pci_stop_bus_device+0x6d/0x90 [ 141.424507] pci_stop_and_remove_bus_device+0xe/0x20 [ 141.424789] pci_iov_remove_virtfn+0xba/0x120 [ 141.425452] sriov_disable+0x2f/0xf0 [ 141.425679] igb_disable_sriov+0x4e/0x100 [igb] [ 141.426353] igb_remove+0xa0/0x130 [igb] [ 141.426599] pci_device_remove+0x36/0xb0 [ 141.426796] device_release_driver_internal+0xc1/0x160 [ 141.427060] driver_detach+0x44/0x90 [ 141.427253] bus_remove_driver+0x55/0xe0 [ 141.427477] pci_unregister_driver+0x2a/0xa0 [ 141.428296] __x64_sys_delete_module+0x141/0x2b0 [ 141.429126] ? mntput_no_expire+0x4a/0x240 [ 141.429363] ? syscall_trace_enter.isra.19+0x126/0x1a0 [ 141.429653] do_syscall_64+0x5b/0x80 [ 141.429847] ? exit_to_user_mode_prepare+0x14d/0x1c0 [ 141.430109] ? syscall_exit_to_user_mode+0x12/0x30 [ 141.430849] ? do_syscall_64+0x67/0x80 [ 141.431083] ? syscall_exit_to_user_mode_prepare+0x183/0x1b0 [ 141.431770] ? syscall_exit_to_user_mode+0x12/0x30 [ 141.432482] ? do_syscall_64+0x67/0x80 [ 141.432714] ? exc_page_fault+0x64/0x140 [ 141.432911] entry_SYSCALL_64_after_hwframe+0x72/0xdc Since the igb_disable_sriov() will call pci_disable_sriov() before releasing any resources, the netdev core will synchronize the cleanup to avoid any races. This patch removes the useless rtnl_(un)lock to guarantee correctness. CC: stable@vger.kernel.org Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race") Reported-by: Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/ Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05igbvf: Regard vf reset nack as successAkihiko Odaki1-3/+10
[ Upstream commit 02c83791ef969c6a8a150b4927193d0d0e50fb23 ] vf reset nack actually represents the reset operation itself is performed but no address is assigned. Therefore, e1000_reset_hw_vf should fill the "perm_addr" with the zero address and return success on such an occasion. This prevents its callers in netdev.c from saying PF still resetting, and instead allows them to correctly report that no address is assigned. Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05intel/igbvf: free irq on the error path in igbvf_request_msix()Gaosheng Cui1-2/+6
[ Upstream commit 85eb39bb39cbb5c086df1e19ba67cc1366693a77 ] In igbvf_request_msix(), irqs have not been freed on the err path, we need to free it. Fix it. Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05iavf: fix inverted Rx hash condition leading to disabled hashAlexander Lobakin1-1/+1
[ Upstream commit 32d57f667f871bc5a8babbe27ea4c5e668ee0ea8 ] Condition, which checks whether the netdev has hashing enabled is inverted. Basically, the tagged commit effectively disabled passing flow hash from descriptor to skb, unless user *disables* it via Ethtool. Commit a876c3ba59a6 ("i40e/i40evf: properly report Rx packet hash") fixed this problem, but only for i40e. Invert the condition now in iavf and unblock passing hash to skbs again. Fixes: 857942fd1aa1 ("i40e: Fix Rx hash reported to the stack by our driver") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05iavf: diet and reformatJesse Brandeburg8-4014/+6
[ Upstream commit ee61022acfffcd4468bc3c31f4fd61503f725999 ] Remove a bunch of unused code and reformat a few lines. Also remove some now un-necessary files. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Stable-dep-of: 32d57f667f87 ("iavf: fix inverted Rx hash condition leading to disabled hash") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05intel-ethernet: rename i40evf to iavfJesse Brandeburg26-24/+31
[ Upstream commit 8062b2263a9fc294ddeb4024b113e8e26b82d5de ] Rename the Intel Ethernet Adaptive Virtual Function driver (i40evf) to a new name (iavf) that is more consistent with the ongoing maintenance of the driver as the universal VF driver for multiple product lines. This first patch fixes up the directory names and the .ko name, intentionally ignoring the function names inside the driver for now. Basically this is the simplest patch that gets the rename done and will be followed by other patches that rename the internal functions. This patch also addresses a couple of string/name issues and updates the Copyright year. Also, made sure to add a MODULE_ALIAS to the old name. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Stable-dep-of: 32d57f667f87 ("iavf: fix inverted Rx hash condition leading to disabled hash") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05i40evf: Change a VF mac without reloading the VF driverPaweł Jabłoński2-5/+14
[ Upstream commit ae1e29f671b467f3e9e9aa2b82ee40e4300ea810 ] Add possibility to change a VF mac address from host side without reloading the VF driver on the guest side. Without this patch it is not possible to change the VF mac because executing i40evf_virtchnl_completion function with VIRTCHNL_OP_GET_VF_RESOURCES opcode resets the VF mac address to previous value. Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Stable-dep-of: 32d57f667f87 ("iavf: fix inverted Rx hash condition leading to disabled hash") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22i40e: Add checking for null for nlmsg_find_attr()Natalia Petrova1-0/+2
[ Upstream commit 7fa0b526f865cb42aa33917fd02a92cb03746f4d ] The result of nlmsg_find_attr() 'br_spec' is dereferenced in nla_for_each_nested(), but it can take NULL value in nla_find() function, which will result in an error. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-22i40e: add double of VLAN header when computing the max MTUJason Xing1-1/+1
commit ce45ffb815e8e238f05de1630be3969b6bb15e4e upstream. Include the second VLAN HLEN into account when computing the maximum MTU size as other drivers do. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18igb: Do not free q_vector unless new one was allocatedKees Cook1-2/+6
[ Upstream commit 0668716506ca66f90d395f36ccdaebc3e0e84801 ] Avoid potential use-after-free condition under memory pressure. If the kzalloc() fails, q_vector will be freed but left in the original adapter->q_vector[v_idx] array position. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18igb: Initialize mailbox message for VF resetTony Nguyen1-1/+1
commit de5dc44370fbd6b46bd7f1a1e00369be54a041c8 upstream. When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case. Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address") Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221212190031.3983342-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14i40e: Disallow ip4 and ip6 l4_4_bytesPrzemyslaw Patynowski1-5/+1
[ Upstream commit d64aaf3f7869f915fd120763d75f11d6b116424d ] Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or IP6 flow director filters. Flow director does not support filtering on l4 bytes for PCTYPEs used by IP4 and IP6 filters. Without this patch, user could create filters with l4_4_bytes fields, which did not do any filtering on L4, but only on L3 fields. Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Fix for VF MAC address 0Sylwester Dziedziuch1-0/+2
[ Upstream commit 08501970472077ed5de346ad89943a37d1692e9b ] After spawning max VFs on a PF, some VFs were not getting resources and their MAC addresses were 0. This was caused by PF sleeping before flushing HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for VF. Fix by adding a sleep after hw flush. Fixes: e4b433f4a741 ("i40e: reset all VFs in parallel when rebuilding PF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Fix not setting default xps_cpus after resetMichal Jaron1-1/+18
[ Upstream commit 82e0572b23029b380464fa9fdc125db9c1506d0a ] During tx rings configuration default XPS queue config is set and __I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is cleared and set again with default mapping only during queues build, it means after first setup or reset with queues rebuild. (i.e. ethtool -L <interface> combined <number>) After other resets (i.e. ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default maps cannot be set again. It results in cleared xps_cpus mapping until queues are not rebuild or mapping is not set by user. Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let the driver set xps_cpus to defaults again after it was cleared. Fixes: 6f853d4f8e93 ("i40e: allow XPS with QoS enabled") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14igb: Allocate MSI-X vector when testingAkihiko Odaki1-0/+2
[ Upstream commit 28e96556baca7056d11d9fb3cdd0aba4483e00d8 ] Without this change, the interrupt test fail with MSI-X environment: $ sudo ethtool -t enp0s2 offline [ 43.921783] igb 0000:00:02.0: offline testing starting [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 51.272202] igb 0000:00:02.0: testing shared interrupt [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 4 Loopback test (offline) 0 Link test (on/offline) 0 Here, "4" means an expected interrupt was not delivered. To fix this, route IRQs correctly to the first MSI-X vector by setting IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be masked. The interrupt test now runs properly with this change: $ sudo ethtool -t enp0s2 offline [ 42.762985] igb 0000:00:02.0: offline testing starting [ 50.141967] igb 0000:00:02.0: testing shared interrupt [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14e1000e: Fix TX dispatch conditionAkihiko Odaki1-2/+2
[ Upstream commit eed913f6919e253f35d454b2f115f2a4db2b741a ] e1000_xmit_frame is expected to stop the queue and dispatch frames to hardware if there is not sufficient space for the next frame in the buffer, but sometimes it failed to do so because the estimated maximum size of frame was wrong. As the consequence, the later invocation of e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer remained forever, resulting in a watchdog failure. This change fixes the estimated size by making it match with the condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to account for the following lines which determines the space requirement for not causing NETDEV_TX_BUSY: ``` /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); ``` This issue was found when running http-stress02 test included in Linux Test Project 20220930 on QEMU with the following commandline: ``` qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8 -drive if=virtio,format=raw,file=root.img,file.locking=on -device e1000e,netdev=netdev -netdev tap,script=ifup,downscript=no,id=netdev ``` Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix flow-type by setting GL_HASH_INSET registersSlawomir Laba1-33/+38
[ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ] Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix VF hang when reset is triggered on another VFSylwester Dziedziuch2-11/+33
[ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ] When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix ethtool rx-flow-hash setting for X722Slawomir Laba2-8/+27
[ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ] When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i40e: Fix set max_tx_rate when it is lower than 1 MbpsMichal Jaron1-6/+26
[ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ] While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28i40e: Fix VF set max MTU sizeMichal Jaron1-0/+20
[ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ] Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28iavf: Fix cached head and tail value for iavf_get_tx_pendingBrett Creeley1-1/+4
[ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15i40e: Fix kernel crash during module removalIvan Vecera1-1/+4
[ Upstream commit fb8396aeda5872369a8ed6d2301e2c86e303c520 ] The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounterJacob Keller1-13/+46
[ Upstream commit 25d7a5f5a6bb15a2dae0a3f39ea5dda215024726 ] The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne <spayne@aurora.tech> Reported-by: Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25igb: Add lock to avoid data raceLin Ma2-1/+13
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream. The commit c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834ce541 ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady1-1/+3
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream. When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski1-0/+4
[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ] Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-02igb: Make DMA faster when CPU is active on the PCIe linkKai-Heng Feng1-7/+5
[ Upstream commit 4e0effd9007ea0be31f7488611eb3824b4541554 ] Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-25i40e: Fix call trace in setup_tx_descriptorsAleksandr Loktionov1-8/+17
[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ] After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-25i40e: Fix adding ADQ filter to TC0Grzegorz Szczurek1-0/+5
[ Upstream commit c3238d36c3a2be0a29a9d848d6c51e1b14be6692 ] Procedure of configure tc flower filters erroneously allows to create filters on TC0 where unfiltered packets are also directed by default. Issue was caused by insufficient checks of hw_tc parameter specifying the hardware traffic class to pass matching packets to. Fix checking hw_tc parameter which blocks creation of filters on TC0. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz1-2/+2
commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream. When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz1-2/+2
commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream. After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25igb: skip phy status check where unavailableKevin Mitchell1-1/+2
[ Upstream commit 942d2ad5d2e0df758a645ddfadffde2795322728 ] igb_read_phy_reg() will silently return, leaving phy_data untouched, if hw->ops.read_reg isn't set. Depending on the uninitialized value of phy_data, this led to the phy status check either succeeding immediately or looping continuously for 2 seconds before emitting a noisy err-level timeout. This message went out to the console even though there was no actual problem. Instead, first check if there is read_reg function pointer. If not, proceed without trying to check the phy status register. Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition") Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27e1000e: Fix possible overflow in LTR decodingSasha Neftin1-2/+2
commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream. When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: stable@vger.kernel.org Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <jahutchinson99@googlemail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Tested-by: James Hutchinson <jahutchinson99@googlemail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16ixgbevf: Require large buffers for build_skb on 82599VFSamuel Mendoza-Jonas1-6/+7
[ Upstream commit fe68195daf34d5dddacd3f93dd3eafc4beca3a0e ] From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb around new data in the page buffer shared with the ixgbe PF. This uses either a 2K or 3K buffer, and offsets the DMA mapping by NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to ensure the PF does not write a full 2K bytes into the buffer, which is actually 2K minus the offset. However on the 82599 virtual function, the RXDCTL mechanism is not available. The driver attempts to work around this by using the SET_LPE mailbox method to lower the maximm frame size, but the ixgbe PF driver ignores this in order to keep the PF and all VFs in sync[0]. This means the PF will write up to the full 2K set in SRRCTL, causing it to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer. With 4K pages split into two buffers, this means it either writes NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA mapping. Avoid this by only enabling build_skb when using "large" buffers (3K). These are placed in each half of an order-1 page, preventing the PF from writing past the end of the mapping. [0]: Technically it only ever raises the max frame size, see ixgbe_set_vf_lpe() in ixgbe_sriov.c Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08i40e: fix unsigned stat widthsJoe Damato3-7/+7
commit 3b8428b84539c78fdc8006c17ebd25afd4722d51 upstream. Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <jdamato@fastly.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08i40e: Fix queues reservation for XDPSylwester Dziedziuch1-0/+14
commit 92947844b8beee988c0ce17082b705c2f75f0742 upstream. When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI. Fixes: 41c445ff0f48 ("i40e: main driver core") Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08i40e: Fix issue when maximum queues is exceededJedrzej Jagielski3-13/+61
commit d701658a50a471591094b3eb3961b4926cc8f104 upstream. Before this patch VF interface vanished when maximum queue number was exceeded. Driver tried to add next queues even if there was not enough space. PF sent incorrect number of queues to the VF when there were not enough of them. Add an additional condition introduced to check available space in 'qp_pile' before proceeding. This condition makes it impossible to add queues if they number is greater than the number resulting from available space. Also add the search for free space in PF queue pair piles. Without this patch VF interfaces are not seen when available space for queues has been exceeded and following logs appears permanently in dmesg: "Unable to get VF config (-32)". "VF 62 failed opcode 3, retval: -5" "Unable to get VF config due to PF error condition, not retrying" Fixes: 7daa6bf3294e ("i40e: driver core headers") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08i40e: Increase delay to 1 s after global EMP resetJedrzej Jagielski1-9/+3
commit 9b13bd53134c9ddd544a790125199fdbdb505e67 upstream. Recently simplified i40e_rebuild causes that FW sometimes is not ready after NVM update, the ping does not return. Increase the delay in case of EMP reset. Old delay of 300 ms was introduced for specific cards for 710 series. Now it works for all the cards and delay was increased. Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11i40e: Fix incorrect netdev's real number of RX/TX queuesJedrzej Jagielski1-7/+25
commit e738451d78b2f8a9635d66c6a87f304b4d965f7a upstream. There was a wrong queues representation in sysfs during driver's reinitialization in case of online cpus number is less than combined queues. It was caused by stopped NetworkManager, which is responsible for calling vsi_open function during driver's initialization. In specific situation (ex. 12 cpus online) there were 16 queues in /sys/class/net/<iface>/queues. In case of modifying queues with value higher, than number of online cpus, then it caused write errors and other errors. Add updating of sysfs's queues representation during driver initialization. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11i40e: fix use-after-free in i40e_sync_filters_subtask()Di Zhu1-0/+24
commit 3116f59c12bd24c513194cd3acb3ec1f7d468954 upstream. Using ifconfig command to delete the ipv6 address will cause the i40e network card driver to delete its internal mac_filter and i40e_service_task kernel thread will concurrently access the mac_filter. These two processes are not protected by lock so causing the following use-after-free problems. print_address_description+0x70/0x360 ? vprintk_func+0x5e/0xf0 kasan_report+0x1b2/0x330 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e] i40e_sync_filters_subtask+0xe3/0x130 [i40e] i40e_service_task+0x195/0x24c0 [i40e] process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 ? process_one_work+0x7d0/0x7d0 kthread+0x1c3/0x1f0 ? kthread_park+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 2279810: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0xf3/0x1e0 i40e_add_filter+0x127/0x2b0 [i40e] i40e_add_mac_filter+0x156/0x190 [i40e] i40e_addr_sync+0x2d/0x40 [i40e] __hw_addr_sync_dev+0x154/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_add+0x6c/0x90 igmp6_group_added+0x214/0x230 __ipv6_dev_mc_inc+0x338/0x4f0 addrconf_join_solict.part.7+0xa2/0xd0 addrconf_dad_work+0x500/0x980 process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 kthread+0x1c3/0x1f0 ret_from_fork+0x35/0x40 Freed by task 2547073: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1b0 __i40e_del_filter+0xa3/0xf0 [i40e] i40e_del_mac_filter+0xf3/0x130 [i40e] i40e_addr_unsync+0x85/0xa0 [i40e] __hw_addr_sync_dev+0x9d/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_del+0x69/0x80 igmp6_group_dropped+0x279/0x510 __ipv6_dev_mc_dec+0x174/0x220 addrconf_leave_solict.part.8+0xa2/0xd0 __ipv6_ifa_notify+0x4cd/0x570 ipv6_ifa_notify+0x58/0x80 ipv6_del_addr+0x259/0x4a0 inet6_addr_del+0x188/0x260 addrconf_del_ifaddr+0xcc/0x130 inet6_ioctl+0x152/0x190 sock_do_ioctl+0xd8/0x2b0 sock_ioctl+0x2e5/0x4c0 do_vfs_ioctl+0x14e/0xa80 ksys_ioctl+0x7c/0xa0 __x64_sys_ioctl+0x42/0x50 do_syscall_64+0x98/0x2c0 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Di Zhu <zhudi2@huawei.com> Signed-off-by: Rui Zhang <zhangrui182@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22ixgbe: set X550 MDIO speed before talking to PHYCyril Novikov1-0/+3
[ Upstream commit bf0a375055bd1afbbf02a0ef45f7655da7b71317 ] The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 00:57:54 +0300