summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2025-05-29idpf: fix idpf_vport_splitq_napi_poll()Eric Dumazet1-9/+9
[ Upstream commit 407e0efdf8baf1672876d5948b75049860a93e59 ] idpf_vport_splitq_napi_poll() can incorrectly return @budget after napi_complete_done() has been called. This violates NAPI rules, because after napi_complete_done(), current thread lost napi ownership. Move the test against POLL_MODE before the napi_complete_done(). Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support") Reported-by: Peter Newman <peternewman@google.com> Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Madhu Chittim <madhu.chittim@intel.com> Cc: Phani Burra <phani.r.burra@intel.com> Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29idpf: fix null-ptr-deref in idpf_features_checkPavan Kumar Linga2-4/+8
[ Upstream commit 2dabe349f7882ff1407a784d54d8541909329088 ] idpf_features_check is used to validate the TX packet. skb header length is compared with the hardware supported value received from the device control plane. The value is stored in the adapter structure and to access it, vport pointer is used. During reset all the vports are released and the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the max header length value in netdev private structure. This also helps to cache the value and avoid accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ... RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ? idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ... Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops") Reviewed-by: Madhu Chititm <madhu.chittim@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29ice: Fix LACP bonds without SRIOV environmentDave Ertman1-0/+6
[ Upstream commit 6c778f1b839b63525b30046c9d1899424a62be0a ] If an aggregate has the following conditions: - The SRIOV LAG DDP package has been enabled - The bond is in 802.3ad LACP mode - The bond is disqualified from supporting SRIOV VF LAG - Both interfaces were added simultaneously to the bond (same command) Then there is a chance that the two interfaces will be assigned different LACP Aggregator ID's. This will cause a failure of the LACP control over the bond. To fix this, we can detect if the primary interface for the bond (as defined by the driver) is not in switchdev mode, and exit the setup flow if so. Reproduction steps: %> ip link add bond0 type bond mode 802.3ad miimon 100 %> ip link set bond0 up %> ifenslave bond0 eth0 eth1 %> cat /proc/net/bonding/bond0 | grep Agg Check for Aggregator IDs that differ. Fixes: ec5a6c5f79ed ("ice: process events created by lag netdev event handler") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29ice: fix vf->num_mac count with port representorsJacob Keller1-1/+0
[ Upstream commit bbd95160a03dbfcd01a541f25c27ddb730dfbbd5 ] The ice_vc_repr_add_mac() function indicates that it does not store the MAC address filters in the firmware. However, it still increments vf->num_mac. This is incorrect, as vf->num_mac should represent the number of MAC filters currently programmed to firmware. Indeed, we only perform this increment if the requested filter is a unicast address that doesn't match the existing vf->hw_lan_addr. In addition, ice_vc_repr_del_mac() does not decrement the vf->num_mac counter. This results in the counter becoming out of sync with the actual count. As it turns out, vf->num_mac is currently only used in legacy made without port representors. The single place where the value is checked is for enforcing a filter limit on untrusted VFs. Upcoming patches to support VF Live Migration will use this value when determining the size of the TLV for MAC address filters. Fix the representor mode function to stop incrementing the counter incorrectly. Fixes: ac19e03ef780 ("ice: allow process VF opcodes in different ways") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29ice: count combined queues using Rx/Tx countMichal Swiatkowski1-2/+1
[ Upstream commit c3a392bdd31adc474f1009ee85c13fdd01fe800d ] Previous implementation assumes that there is 1:1 matching between vectors and queues. It isn't always true. Get minimum value from Rx/Tx queues to determine combined queues number. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29ice: treat dyn_allowed only as suggestionMichal Swiatkowski2-12/+15
[ Upstream commit a8c2d3932c1106af2764cc6869b29bcf3cb5bc47 ] It can be needed to have some MSI-X allocated as static and rest as dynamic. For example on PF VSI. We want to always have minimum one MSI-X on it, because of that it is allocated as a static one, rest can be dynamic if it is supported. Change the ice_get_irq_res() to allow using static entries if they are free even if caller wants dynamic one. Adjust limit values to the new approach. Min and max in limit means the values that are valid, so decrease max and num_static by one. Set vsi::irq_dyn_alloc if dynamic allocation is supported. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29ice: init flow director before RDMAMichal Swiatkowski1-2/+4
[ Upstream commit d67627e7b53203ca150e54723abbed81a0716286 ] Flow director needs only one MSI-X. Load it before RDMA to save MSI-X for it. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29igc: Avoid unnecessary link down event in XDP_SETUP_PROG processSong Yoong Siang1-4/+15
[ Upstream commit be324b790368c1522f07c6bb5654122e07b5e588 ] The igc_close()/igc_open() functions are too drastic for installing a new XDP prog because they cause undesirable link down event and device reset. To avoid delays in Ethernet traffic, improve the XDP_SETUP_PROG process by using the same sequence as igc_xdp_setup_pool(), which performs only the necessary steps, as follows: 1. stop the traffic and clean buffer 2. stop NAPI 3. install the XDP program 4. resume NAPI 5. allocate buffer and resume the traffic This patch has been tested using the 'ip link set xdpdrv' command to attach a simple XDP prog that always returns XDP_PASS. Before this patch, attaching xdp program will cause ptp4l to lose sync for few seconds, as shown in ptp4l log below: ptp4l[198.082]: rms 4 max 8 freq +906 +/- 2 delay 12 +/- 0 ptp4l[199.082]: rms 3 max 4 freq +906 +/- 3 delay 12 +/- 0 ptp4l[199.536]: port 1 (enp2s0): link down ptp4l[199.536]: port 1 (enp2s0): SLAVE to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED) ptp4l[199.600]: selected local clock 22abbc.fffe.bb1234 as best master ptp4l[199.600]: port 1 (enp2s0): assuming the grand master role ptp4l[199.600]: port 1 (enp2s0): master state recommended in slave only mode ptp4l[199.600]: port 1 (enp2s0): defaultDS.priority1 probably misconfigured ptp4l[202.266]: port 1 (enp2s0): link up ptp4l[202.300]: port 1 (enp2s0): FAULTY to LISTENING on INIT_COMPLETE ptp4l[205.558]: port 1 (enp2s0): new foreign master 44abbc.fffe.bb2144-1 ptp4l[207.558]: selected best master clock 44abbc.fffe.bb2144 ptp4l[207.559]: port 1 (enp2s0): LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[208.308]: port 1 (enp2s0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[208.933]: rms 742 max 1303 freq -195 +/- 682 delay 12 +/- 0 ptp4l[209.933]: rms 178 max 274 freq +387 +/- 243 delay 12 +/- 0 After this patch, attaching xdp program no longer cause ptp4l to lose sync, as shown in ptp4l log below: ptp4l[201.183]: rms 1 max 3 freq +959 +/- 1 delay 8 +/- 0 ptp4l[202.183]: rms 1 max 3 freq +961 +/- 2 delay 8 +/- 0 ptp4l[203.183]: rms 2 max 3 freq +958 +/- 2 delay 8 +/- 0 ptp4l[204.183]: rms 3 max 5 freq +961 +/- 3 delay 8 +/- 0 ptp4l[205.183]: rms 2 max 4 freq +964 +/- 3 delay 8 +/- 0 Besides, before this patch, attaching xdp program will causes flood ping to lose 10 packets, as shown in ping statistics below: --- 169.254.1.2 ping statistics --- 100000 packets transmitted, 99990 received, +6 errors, 0.01% packet loss, time 34001ms rtt min/avg/max/mdev = 0.028/0.301/3104.360/13.838 ms, pipe 10, ipg/ewma 0.340/0.243 ms After this patch, attaching xdp program no longer cause flood ping to loss any packets, as shown in ping statistics below: --- 169.254.1.2 ping statistics --- 100000 packets transmitted, 100000 received, 0% packet loss, time 32326ms rtt min/avg/max/mdev = 0.027/0.231/19.589/0.155 ms, pipe 2, ipg/ewma 0.323/0.322 ms On the other hand, this patch has been tested with tools/testing/selftests/ bpf/xdp_hw_metadata app to make sure AF_XDP zero-copy is working fine with XDP Tx and Rx metadata. Below is the result of last packet after received 10000 UDP packets with interval 1 ms: poll: 1 (0) skip=0 fail=0 redir=10000 xsk_ring_cons__peek: 1 0x55881c7ef7a8: rx_desc[9999]->addr=8f110 addr=8f110 comp_addr=8f110 EoP rx_hash: 0xFB9BB6A3 with RSS type:0x1 HW RX-time: 1733923136269470866 (sec:1733923136.2695) delta to User RX-time sec:0.0000 (43.280 usec) XDP RX-time: 1733923136269482482 (sec:1733923136.2695) delta to User RX-time sec:0.0000 (31.664 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x55881c7ef7a8: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6 0x55881c7ef7a8: complete tx idx=9999 addr=f010 HW TX-complete-time: 1733923136269591637 (sec:1733923136.2696) delta to User TX-complete-time sec:0.0001 (108.571 usec) XDP RX-time: 1733923136269482482 (sec:1733923136.2695) delta to User TX-complete-time sec:0.0002 (217.726 usec) HW RX-time: 1733923136269470866 (sec:1733923136.2695) delta to HW TX-complete-time sec:0.0001 (120.771 usec) 0x55881c7ef7a8: complete rx idx=10127 addr=8f110 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29ixgbe: add support for thermal sensor event receptionJedrzej Jagielski2-0/+7
[ Upstream commit affead2d904e8f82c0b89e23b3835242eb8c3e1a ] E610 NICs unlike the previous devices utilising ixgbe driver are notified in the case of overheating by the FW ACI event. In event of overheat when threshold is exceeded, FW suspends all traffic and sends overtemp event to the driver. Then driver logs appropriate message and disables the adapter instance. The card remains in that state until the platform is rebooted. This approach is a solution to the fact current version of the E610 FW doesn't support reading thermal sensor data by the SW. So give to user at least any info that overtemp event has occurred, without interface disappearing from the OS without any note. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18ice: use DSN instead of PCI BDF for ice_adapter indexPrzemek Kitszel2-31/+22
[ Upstream commit 0093cb194a7511d1e68865fa35b763c72e44c2f0 ] Use Device Serial Number instead of PCI bus/device/function for the index of struct ice_adapter. Functions on the same physical device should point to the very same ice_adapter instance, but with two PFs, when at least one of them is PCI-e passed-through to a VM, it is no longer the case - PFs will get seemingly random PCI BDF values, and thus indices, what finally leds to each of them being on their own instance of ice_adapter. That causes them to don't attempt any synchronization of the PTP HW clock usage, or any other future resources. DSN works nicely in place of the index, as it is "immutable" in terms of virtualization. Fixes: 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on the same NIC") Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250505161939.2083581-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09igc: fix lock order in igc_ptp_resetJacob Keller1-2/+4
[ Upstream commit c7d6cb96d5c33b5148f3dc76fcd30a9b8cd9e973 ] Commit 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions") added a new mutex to protect concurrent PTM transactions. This lock is acquired in igc_ptp_reset() in order to ensure the PTM registers are properly disabled after a device reset. The flow where the lock is acquired already holds a spinlock, so acquiring a mutex leads to a sleep-while-locking bug, reported both by smatch, and the kernel test robot. The critical section in igc_ptp_reset() does correctly use the readx_poll_timeout_atomic variants, but the standard PTM flow uses regular sleeping variants. This makes converting the mutex to a spinlock a bit tricky. Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first, and then the tmreg_lock spinlock. This is safe because there is no other ordering dependency on these locks, as this is the only place where both locks were acquired simultaneously. Indeed, any other flow acquiring locks in that order would be wrong regardless. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Fixes: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions") Link: https://lore.kernel.org/intel-wired-lan/Z_-P-Hc1yxcw0lTB@stanley.mountain/ Link: https://lore.kernel.org/intel-wired-lan/202504211511.f7738f5d-lkp@intel.com/T/#u Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09idpf: protect shutdown from resetLarysa Zaremba1-0/+1
[ Upstream commit ed375b182140eeb9c73609b17939c8a29b27489e ] Before the referenced commit, the shutdown just called idpf_remove(), this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task rescheduling reset. Without this flag set the shutdown process is vulnerable to HW reset or any other triggering conditions (such as default mailbox being destroyed). When one of conditions checked in idpf_service_task becomes true, vc_event_task can be rescheduled during shutdown, this leads to accessing freed memory e.g. idpf_req_rel_vector_indexes() trying to read vport->q_vector_idxs. This in turn causes the system to become defunct during e.g. systemctl kexec. Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown process, instead just cancel the serv_task before cancelling adapter->serv_task before cancelling adapter->vc_event_task to ensure that reset will not be scheduled while we are doing a shutdown. Fixes: 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09idpf: fix potential memory leak on kcalloc() failureMichal Swiatkowski1-8/+11
[ Upstream commit 8a558cbda51bef09773c72bf74a32047479110c7 ] In case of failing on rss_data->rss_key allocation the function is freeing vport without freeing earlier allocated q_vector_idxs. Fix it. Move from freeing in error branch to goto scheme. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Suggested-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09idpf: fix offloads support for encapsulated packetsMadhu Chittim2-48/+27
[ Upstream commit 713dd6c2deca88cba0596b1e2576f7b7a8e5c59e ] Split offloads into csum, tso and other offloads so that tunneled packets do not by default have all the offloads enabled. Stateless offloads for encapsulated packets are not yet supported in firmware/software but in the driver we were setting the features same as non encapsulated features. Fixed naming to clarify CSUM bits are being checked for Tx. Inherit netdev features to VLAN interfaces as well. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Zachary Goldstein <zachmgoldstein@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()Xuanqiang Luo1-0/+5
[ Upstream commit 425c5f266b2edeee0ce16fedd8466410cdcfcfe3 ] As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI pointer values"), we need to perform a null pointer check on the return value of ice_get_vf_vsi() before using it. Fixes: 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters") Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250425222636.3188441-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09ice: fix Get Tx Topology AQ command error on E830Paul Greenwalt1-5/+5
[ Upstream commit 3ffcd7b657c9d96eb3ffe174449b4248dd7fc6a9 ] The Get Tx Topology AQ command (opcode 0x0418) has different read flag requirements depending on the hardware/firmware. For E810, E822, and E823 firmware the read flag must be set, and for newer hardware (E825 and E830) it must not be set. This results in failure to configure Tx topology and the following warning message during probe: DDP package does not support Tx scheduling layers switching feature - please update to the latest DDP package and try again The current implementation only handles E825-C but not E830. It is confusing as we first check ice_is_e825c() and then set the flag in the set case. Finally, we check ice_is_e825c() again and set the flag for all other hardware in both the set and get case. Instead, notice that we always need the read flag for set, but only need the read flag for get on E810, E822, and E823 firmware. Fix the logic to check the MAC type and set the read flag in get only on the older devices which require it. Fixes: ba1124f58afd ("ice: Add E830 device IDs, MAC type and registers") Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250425222636.3188441-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09ice: Remove unnecessary ice_is_e8xx() functionsKarol Kolacinski8-279/+147
[ Upstream commit 9973ac9f23a79285d70365c72e98bffdb94a429d ] Remove unnecessary ice_is_e8xx() functions and PHY model. Instead, use MAC type where applicable. Don't check device type in ice_ptp_maybe_trigger_tx_interrupt(), because in reality it depends on the ready bitmap, which only E810 does not have. Call ice_ptp_cfg_phy_interrupt() unconditionally, because all further function calls check the MAC type anyway and this allows simpler code in the future with addition of the new MAC types. Reorder ICE_MAC_* cases in switches in ice_ptp* as in enum ice_mac_type. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 3ffcd7b657c9 ("ice: fix Get Tx Topology AQ command error on E830") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09ice: Don't check device type when checking GNSS presenceKarol Kolacinski7-116/+105
[ Upstream commit e2c6737e6e82e9991646cd5389391bb6d3572a68 ] Don't check if the device type is E810T as non-E810T devices can support GNSS too and PCA9575 check is enough to determine if GNSS is present or not. Rename ice_gnss_is_gps_present() to ice_gnss_is_module_present() because GNSS module supports multiple GNSS providers, not only GPS. Move functions related to PCA9575 from ice_ptp_hw.c to ice_common.c to be able to access them when PTP is disabled in the kernel, but GNSS is enabled. Remove logical AND with ICE_AQC_LINK_TOPO_NODE_TYPE_M in ice_get_pca9575_handle(), which has no effect, and reorder device type checks to check the device_id first, then set other variables. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 3ffcd7b657c9 ("ice: fix Get Tx Topology AQ command error on E830") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25igc: add lock preventing multiple simultaneous PTM transactionsChristopher S M Hall2-2/+19
[ Upstream commit 1a931c4f5e6862e61a4b130cb76b422e1415f644 ] Add a mutex around the PTM transaction to prevent multiple transactors Multiple processes try to initiate a PTM transaction, one or all may fail. This can be reproduced by running two instances of the following: $ sudo phc2sys -O 0 -i tsn0 -m PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails Note: Normally two instance of PHC2SYS will not run, but one process should not break another. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25igc: cleanup PTP module if probe failsChristopher S M Hall1-0/+1
[ Upstream commit 1f025759ba394dd53e434d2668cb0597886d9b69 ] Make sure that the PTP module is cleaned up if the igc_probe() fails by calling igc_ptp_stop() on exit. Fixes: d89f88419f99 ("igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller support") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25igc: handle the IGC_PTP_ENABLED flag correctlyChristopher S M Hall1-0/+7
[ Upstream commit 26a3910afd111f7c1a96dace6dc02f3225063896 ] All functions in igc_ptp.c called from igc_main.c should check the IGC_PTP_ENABLED flag. Adding check for this flag to stop and reset functions. Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25igc: move ktime snapshot into PTM retry loopChristopher S M Hall1-9/+9
[ Upstream commit cd7f7328d691937102732f39f97ead35b15bf803 ] Move ktime_get_snapshot() into the loop. If a retry does occur, a more recent snapshot will result in a more accurate cross-timestamp. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25igc: increase wait time before retrying PTMChristopher S M Hall1-1/+4
[ Upstream commit 714cd033da6fea4cf54a11b3cfd070afde3f31df ] The i225/i226 hardware retries if it receives an inappropriate response from the upstream device. If the device retries too quickly, the root port does not respond. The wait between attempts was reduced from 10us to 1us in commit 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us"), which said: With the 10us interval, we were seeing PTM transactions take around 12us. Hardware team suggested this interval could be lowered to 1us which was confirmed with PCIe sniffer. With the 1us interval, PTM dialogs took around 2us. While a 1us short cycle time was thought to be theoretically sufficient, it turns out in practice it is not quite long enough. It is unclear if the problem is in the root port or an issue in i225/i226. Increase the wait from 1us to 4us. Increasing to 2us appeared to work in practice on the setups we have available. A value of 4us was chosen due to the limited hardware available for testing, with a goal of ensuring we wait long enough without overly penalizing the response time when unnecessary. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails Fixes: 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25igc: fix PTM cycle trigger logicChristopher S M Hall2-29/+42
[ Upstream commit 8e404ad95d2c10c261e2ef6992c7c12dde03df0e ] Writing to clear the PTM status 'valid' bit while the PTM cycle is triggered results in unreliable PTM operation. To fix this, clear the PTM 'trigger' and status after each PTM transaction. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails This patch also fixes a hang in igc_probe() when loading the igc driver in the kdump kernel on systems supporting PTM. The igc driver running in the base kernel enables PTM trigger in igc_probe(). Therefore the driver is always in PTM trigger mode, except in brief periods when manually triggering a PTM cycle. When a crash occurs, the NIC is reset while PTM trigger is enabled. Due to a hardware problem, the NIC is subsequently in a bad busmaster state and doesn't handle register reads/writes. When running igc_probe() in the kdump kernel, the first register access to a NIC register hangs driver probing and ultimately breaks kdump. With this patch, igc has PTM trigger disabled most of the time, and the trigger is only enabled for very brief (10 - 100 us) periods when manually triggering a PTM cycle. Chances that a crash occurs during a PTM trigger are not 0, but extremely reduced. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20igc: Fix XSK queue NAPI ID mappingJoe Damato3-6/+2
commit dddeeaa16ce9d163ccf3b681715512d338afa541 upstream. In commit b65969856d4f ("igc: Link queues to NAPI instances"), the XSK queues were incorrectly unmapped from their NAPI instances. After discussion on the mailing list and the introduction of a test to codify the expected behavior, we can see that the unmapping causes the check_xsk test to fail: NETIF=enp86s0 ./tools/testing/selftests/drivers/net/queues.py [...] # Check| ksft_eq(q.get('xsk', None), {}, # Check failed None != {} xsk attr on queue we configured not ok 4 queues.check_xsk After this commit, the test passes: ok 4 queues.check_xsk Note that the test itself is only in net-next, so I tested this change by applying it to my local net-next tree, booting, and running the test. Cc: stable@vger.kernel.org Fixes: b65969856d4f ("igc: Link queues to NAPI instances") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10idpf: fix adapter NULL pointer dereference on rebootEmil Tantilov1-1/+5
[ Upstream commit 4c9106f4906a85f6b13542d862e423bcdc118cc3 ] With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown. Reported-by: Yuying Ma <yuma@redhat.com> Fixes: e850efed5e15 ("idpf: add module register and probe functionality") Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ixgbe: fix media type detection for E610 devicePiotr Kwapulinski1-1/+3
[ Upstream commit 40206599beec98cfeb01913ee417f015e3f6190c ] The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect media type detection for E610 device. It reproduces when advertised speed is modified after driver reload. Clear the previous outdated PHY type high value. Reproduction steps: modprobe ixgbe ethtool -s eth0 advertise 0x1000000000000 modprobe -r ixgbe modprobe ixgbe ethtool -s eth0 advertise 0x1000000000000 Result before the fix: netlink error: link settings update failed netlink error: Invalid argument Result after the fix: No output error Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10e1000e: change k1 configuration on MTP and later platformsVitaly Lifshits3-5/+82
[ Upstream commit efaaf344bc2917cbfa5997633bc18a05d3aed27f ] Starting from Meteor Lake, the Kumeran interface between the integrated MAC and the I219 PHY works at a different frequency. This causes sporadic MDI errors when accessing the PHY, and in rare circumstances could lead to packet corruption. To overcome this, introduce minor changes to the Kumeran idle state (K1) parameters during device initialization. Hardware reset reverts this configuration, therefore it needs to be applied in a few places. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10igc: Fix TX drops in XDP ZCZdenek Bouska1-1/+1
[ Upstream commit d931cf9b38da0f533cacfe51c863a9912e67822f ] Fixes TX frame drops in AF_XDP zero copy mode when budget < 4. xsk_tx_peek_desc() consumed TX frame and it was ignored because of low budget. Not even AF_XDP completion was done for dropped frames. It can be reproduced on i226 by sending 100000x 60 B frames with launch time set to minimal IPG (672 ns between starts of frames) on 1Gbit/s. Always 1026 frames are not sent and are missing a completion. Fixes: 9acf59a752d4c ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10igc: Add launch time support to XDP ZCSong Yoong Siang2-2/+60
[ Upstream commit d7c3a7ff75028bea9e4879bd3dcd04a6dc3e33c8 ] Enable Launch Time Control (LTC) support for XDP zero copy via XDP Tx metadata framework. This patch has been tested with tools/testing/selftests/bpf/xdp_hw_metadata on Intel I225-LM Ethernet controller. Below are the test steps and result. Test 1: Send a single packet with the launch time set to 1 s in the future. Test steps: 1. On the DUT, start the xdp_hw_metadata selftest application: $ sudo ./xdp_hw_metadata enp2s0 -l 1000000000 -L 1 2. On the Link Partner, send a UDP packet with VLAN priority 1 to port 9091 of the DUT. Result: When the launch time is set to 1 s in the future, the delta between the launch time and the transmit hardware timestamp is 0.016 us, as shown in printout of the xdp_hw_metadata application below. 0x562ff5dc8880: rx_desc[4]->addr=84110 addr=84110 comp_addr=84110 EoP rx_hash: 0xE343384 with RSS type:0x1 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to User RX-time sec:0.0002 (183.103 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User RX-time sec:0.0001 (80.309 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x562ff5dc8880: ping-pong with csum=561c (want c7dd) csum_start=34 csum_offset=6 HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW Launch-time sec:1.0000 (1000000.000 usec) 0x562ff5dc8880: complete tx idx=4 addr=4018 HW Launch-time: 1734578016467548904 (sec:1734578016.4675) delta to HW TX-complete-time sec:0.0000 (0.016 usec) HW TX-complete-time: 1734578016467548920 (sec:1734578016.4675) delta to User TX-complete-time sec:0.0000 (32.546 usec) XDP RX-time: 1734578015467651698 (sec:1734578015.4677) delta to User TX-complete-time sec:0.9999 (999929.768 usec) HW RX-time: 1734578015467548904 (sec:1734578015.4675) delta to HW TX-complete-time sec:1.0000 (1000000.016 usec) 0x562ff5dc8880: complete rx idx=132 addr=84110 Test 2: Send 1000 packets with a 10 ms interval and the launch time set to 500 us in the future. Test steps: 1. On the DUT, start the xdp_hw_metadata selftest application: $ sudo chrt -f 99 ./xdp_hw_metadata enp2s0 -l 500000 -L 1 > \ /dev/shm/result.log 2. On the Link Partner, send 1000 UDP packets with a 10 ms interval and VLAN priority 1 to port 9091 of the DUT. Result: When the launch time is set to 500 us in the future, the average delta between the launch time and the transmit hardware timestamp is 0.016 us, as shown in the analysis of /dev/shm/result.log below. The XDP launch time works correctly in sending 1000 packets continuously. Min delta: 0.005 us Avr delta: 0.016 us Max delta: 0.031 us Total packets forwarded: 1000 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250216093430.957880-6-yoong.siang.song@intel.com Stable-dep-of: d931cf9b38da ("igc: Fix TX drops in XDP ZC") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10igc: Refactor empty frame insertion for launch time supportSong Yoong Siang1-32/+50
[ Upstream commit f9b53bb13923f0a6ed2e784a35301cfb4c28f4f4 ] Refactor the code for inserting an empty frame into a new function igc_insert_empty_frame(). This change extracts the logic for inserting an empty packet from igc_xmit_frame_ring() into a separate function, allowing it to be reused in future implementations, such as the XDP zero copy transmit function. Remove the igc_desc_unused() checking in igc_init_tx_empty_descriptor() because the number of descriptors needed is guaranteed. Ensure that skb allocation and DMA mapping work for the empty frame, before proceeding to fill in igc_tx_buffer info, context descriptor, and data descriptor. Rate limit the error messages for skb allocation and DMA mapping failures. Update the comment to indicate that the 2 descriptors needed by the empty frame are already taken into consideration in igc_xmit_frame_ring(). Handle the case where the insertion of an empty frame fails and explain the reason behind this handling. Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250216093430.957880-5-yoong.siang.song@intel.com Stable-dep-of: d931cf9b38da ("igc: Fix TX drops in XDP ZC") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10igb: reject invalid external timestamp requests for 82580-based HWJacob Keller1-0/+6
[ Upstream commit 5eada2aabf13dcc4574b0a281b963b8cc55a52cc ] The igb_ptp_feature_enable_82580 function correctly checks that unknown flags are not passed to the function. However, it does not actually check PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp function. The data sheet for the 82580 product says: Upon a change in the input level of one of the SDP pins that was configured to detect Time stamp events using the TSSDP register, a time stamp of the system time is captured into one of the two auxiliary time stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1). For example to define timestamping of events in the AUXSTMPL0 and AUXSTMPH0 registers, Software should: 1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1. 2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping The same paragraph is in the i350 and i354 data sheets. The wording implies that the time stamps are captured at any level change. There does not appear to be any way to only timestamp one edge of the signal. Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2. Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10idpf: check error for register_netdev() on initEmil Tantilov1-9/+22
[ Upstream commit 680811c67906191b237bbafe7dabbbad64649b39 ] Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Suggested-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()Mateusz Polchlopek1-9/+15
[ Upstream commit 1388dd564183a5a18ec4a966748037736b5653c5 ] Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value. Fixes: 99f419df8a5c ("ice: enable FDIR filters from raw binary patterns for VFs") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: fix input validation for virtchnl BWLukasz Czapnik1-3/+21
[ Upstream commit c5be6562de5a19c44605b1c1edba8e339f2022c8 ] Add missing validation of tc and queue id values sent by a VF in ice_vc_cfg_q_bw(). Additionally fixed logged value in the warning message, where max_tx_rate was incorrectly referenced instead of min_tx_rate. Also correct error handling in this function by properly exiting when invalid configuration is detected. Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: validate queue quanta parameters to prevent OOB accessJan Glaza1-4/+9
[ Upstream commit e2f7d3f7331b92cb820da23e8c45133305da1e63 ] Add queue wraparound prevention in quanta configuration. Ensure end_qid does not overflow by validating start_qid and num_queues. Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: stop truncating queue ids when checkingJan Glaza1-1/+1
[ Upstream commit f91d0efcc3dd7b341bb370499b99dc02d4fb792f ] Queue IDs can be up to 4096, fix invalid check to stop truncating IDs to 8 bits. Fixes: bf93bf791cec8 ("ice: introduce ice_virtchnl.c and ice_virtchnl.h") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: fix reservation of resources for RDMA when disabledJesse Brandeburg1-1/+2
[ Upstream commit 7fd71f317288d5150d353ce9d65b1e2abf99a8e2 ] If the CONFIG_INFINIBAND_IRDMA symbol is not enabled as a module or a built-in, then don't let the driver reserve resources for RDMA. The result of this change is a large savings in resources for older kernels, and a cleaner driver configuration for the IRDMA=n case for old and new kernels. Implement this by avoiding enabling the RDMA capability when scanning hardware capabilities. Note: Loading the out-of-tree irdma driver in connection to the in-kernel ice driver, is not supported, and should not be attempted, especially when disabling IRDMA in the kernel config. Fixes: d25a0fc41c1f ("ice: Initialize RDMA support") Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Acked-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: ensure periodic output start time is in the futureKarol Kolacinski1-2/+4
[ Upstream commit 53ce7166cbffd2b8f3bd821fd3918be665afd4c6 ] On E800 series hardware, if the start time for a periodic output signal is programmed into GLTSYN_TGT_H and GLTSYN_TGT_L registers, the hardware logic locks up and the periodic output signal never starts. Any future attempt to reprogram the clock function is futile as the hardware will not reset until a power on. The ice_ptp_cfg_perout function has logic to prevent this, as it checks if the requested start time is in the past. If so, a new start time is calculated by rounding up. Since commit d755a7e129a5 ("ice: Cache perout/extts requests and check flags"), the rounding is done to the nearest multiple of the clock period, rather than to a full second. This is more accurate, since it ensures the signal matches the user request precisely. Unfortunately, there is a race condition with this rounding logic. If the current time is close to the multiple of the period, we could calculate a target time that is extremely soon. It takes time for the software to program the registers, during which time this requested start time could become a start time in the past. If that happens, the periodic output signal will lock up. For large enough periods, or for the logic prior to the mentioned commit, this is unlikely. However, with the new logic rounding to the period and with a small enough period, this becomes inevitable. For example, attempting to enable a 10MHz signal requires a period of 100 nanoseconds. This means in the *best* case, we have 99 nanoseconds to program the clock output. This is essentially impossible, and thus such a small period practically guarantees that the clock output function will lock up. To fix this, add some slop to the clock time used to check if the start time is in the past. Because it is not critical that output signals start immediately, but it *is* critical that we do not brick the function, 0.5 seconds is selected. This does mean that any requested output will be delayed by at least 0.5 seconds. This slop is applied before rounding, so that we always round up to the nearest multiple of the period that is at least 0.5 seconds in the future, ensuring a minimum of 0.5 seconds to program the clock output registers. Finally, to ensure that the hardware registers programming the clock output complete in a timely manner, add a write flush to the end of ice_ptp_write_perout. This ensures we don't risk any issue with PCIe transaction batching. Strictly speaking, this fixes a race condition all the way back at the initial implementation of periodic output programming, as it is theoretically possible to trigger this bug even on the old logic when always rounding to a full second. However, the window is narrow, and the code has been refactored heavily since then, making a direct backport not apply cleanly. Fixes: d755a7e129a5 ("ice: Cache perout/extts requests and check flags") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10ice: health.c: fix compilation on gcc 7.5Przemek Kitszel1-3/+3
[ Upstream commit fa8eda19015ca9ae625f46d4ecb13df651bb54cc ] GCC 7 is not as good as GCC 8+ in telling what is a compile-time const, and thus could be used for static storage. Fortunately keeping strings as const arrays is enough to make old gcc happy. Excerpt from the report: My GCC is: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0. CC [M] drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.o drivers/net/ethernet/intel/ice/devlink/health.c:35:3: error: initializer element is not constant ice_common_port_solutions, {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/devlink/health.c:35:3: note: (near initialization for 'ice_health_status_lookup[0].solution') drivers/net/ethernet/intel/ice/devlink/health.c:35:31: error: initializer element is not constant ice_common_port_solutions, {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/devlink/health.c:35:31: note: (near initialization for 'ice_health_status_lookup[0].data_label[0]') drivers/net/ethernet/intel/ice/devlink/health.c:37:46: error: initializer element is not constant "Change or replace the module or cable.", {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/devlink/health.c:37:46: note: (near initialization for 'ice_health_status_lookup[1].data_label[0]') drivers/net/ethernet/intel/ice/devlink/health.c:39:3: error: initializer element is not constant ice_common_port_solutions, {ice_port_number_label}}, ^~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 85d6164ec56d ("ice: add fw and port health reporters") Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Closes: https://lore.kernel.org/netdev/CY8PR11MB7134BF7A46D71E50D25FA7A989F72@CY8PR11MB7134.namprd11.prod.outlook.com Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-05ice: register devlink prior to creating health reportersPrzemek Kitszel1-2/+2
ice_health_init() was introduced in the commit 2a82874a3b7b ("ice: add Tx hang devlink health reporter"). The call to it should have been put after ice_devlink_register(). It went unnoticed until next reporter by Konrad, which receives events from FW. FW is reporting all events, also from prior driver load, and thus it is not unlikely to have something at the very beginning. And that results in a splat: [ 24.455950] ? devlink_recover_notify.constprop.0+0x198/0x1b0 [ 24.455973] devlink_health_report+0x5d/0x2a0 [ 24.455976] ? __pfx_ice_health_status_lookup_compare+0x10/0x10 [ice] [ 24.456044] ice_process_health_status_event+0x1b7/0x200 [ice] Do the analogous thing for deinit patch. Fixes: 85d6164ec56d ("ice: add fw and port health reporters") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Konrad Knitter <konrad.knitter@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: Fix switchdev slow-path in LAGMarcin Szycik2-1/+30
Ever since removing switchdev control VSI and using PF for port representor Tx/Rx, switchdev slow-path has been working improperly after failover in SR-IOV LAG. LAG assumes that the first uplink to be added to the aggregate will own VFs and have switchdev configured. After failing-over to the other uplink, representors are still configured to Tx through the uplink they are set up on, which fails because that uplink is now down. On failover, update all PRs on primary uplink to use the currently active uplink for Tx. Call netif_keep_dst(), as the secondary uplink might not be in switchdev mode. Also make sure to call ice_eswitch_set_target_vsi() if uplink is in LAG. On the Rx path, representors are already working properly, because default Tx from VFs is set to PF owning the eswitch. After failover the same PF is receiving traffic from VFs, even though link is down. Fixes: defd52455aee ("ice: do Tx through PF netdev in slow-path") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: fix memory leak in aRFS after resetGrzegorz Nitka1-1/+1
Fix aRFS (accelerated Receive Flow Steering) structures memory leak by adding a checker to verify if aRFS memory is already allocated while configuring VSI. aRFS objects are allocated in two cases: - as part of VSI initialization (at probe), and - as part of reset handling However, VSI reconfiguration executed during reset involves memory allocation one more time, without prior releasing already allocated resources. This led to the memory leak with the following signature: [root@os-delivery ~]# cat /sys/kernel/debug/kmemleak unreferenced object 0xff3c1ca7252e6000 (size 8192): comm "kworker/0:0", pid 8, jiffies 4296833052 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340 [<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice] [<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice] [<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice] [<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice] [<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice] [<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0 [<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20 [<ffffffff98f0b6d9>] process_one_work+0x179/0x390 [<ffffffff98f0c1e9>] worker_thread+0x239/0x340 [<ffffffff98f14abc>] kthread+0xcc/0x100 [<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50 [<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30 ... Fixes: 28bf26724fdb ("ice: Implement aRFS") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: do not configure destination override for switchdevLarysa Zaremba3-28/+0
After switchdev is enabled and disabled later, LLDP packets sending stops, despite working perfectly fine before and during switchdev state. To reproduce (creating/destroying VF is what triggers the reconfiguration): devlink dev eswitch set pci/<address> mode switchdev echo '2' > /sys/class/net/<ifname>/device/sriov_numvfs echo '0' > /sys/class/net/<ifname>/device/sriov_numvfs This happens because LLDP relies on the destination override functionality. It needs to 1) set a flag in the descriptor, 2) set the VSI permission to make it valid. The permissions are set when the PF VSI is first configured, but switchdev then enables it for the uplink VSI (which is always the PF) once more when configured and disables when deconfigured, which leads to software-generated LLDP packets being blocked. Do not modify the destination override permissions when configuring switchdev, as the enabled state is the default configuration that is never modified. Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-27idpf: fix checksums set in idpf_rx_rsc()Eric Dumazet1-1/+2
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26ixgbe: fix media cage present detection for E610 devicePiotr Kwapulinski1-1/+1
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect checking of media cage presence for E610 device. Fix it. Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e7d73b32-f12a-49d1-8b60-1ef83359ec13@stanley.mountain/ Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26iavf: fix circular lock dependency with netdev_lockJacob Keller1-4/+8
We have recently seen reports of lockdep circular lock dependency warnings when loading the iAVF driver: [ 1504.790308] ====================================================== [ 1504.790309] WARNING: possible circular locking dependency detected [ 1504.790310] 6.13.0 #net_next_rt.c2933b2befe2.el9 Not tainted [ 1504.790311] ------------------------------------------------------ [ 1504.790312] kworker/u128:0/13566 is trying to acquire lock: [ 1504.790313] ffff97d0e4738f18 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x52c/0x710 [ 1504.790320] [ 1504.790320] but task is already holding lock: [ 1504.790321] ffff97d0e47392e8 (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_finish_config+0x37/0x240 [iavf] [ 1504.790330] [ 1504.790330] which lock already depends on the new lock. [ 1504.790330] [ 1504.790330] [ 1504.790330] the existing dependency chain (in reverse order) is: [ 1504.790331] [ 1504.790331] -> #1 (&adapter->crit_lock){+.+.}-{4:4}: [ 1504.790333] __lock_acquire+0x52d/0xbb0 [ 1504.790337] lock_acquire+0xd9/0x330 [ 1504.790338] mutex_lock_nested+0x4b/0xb0 [ 1504.790341] iavf_finish_config+0x37/0x240 [iavf] [ 1504.790347] process_one_work+0x248/0x6d0 [ 1504.790350] worker_thread+0x18d/0x330 [ 1504.790352] kthread+0x10e/0x250 [ 1504.790354] ret_from_fork+0x30/0x50 [ 1504.790357] ret_from_fork_asm+0x1a/0x30 [ 1504.790361] [ 1504.790361] -> #0 (&dev->lock){+.+.}-{4:4}: [ 1504.790364] check_prev_add+0xf1/0xce0 [ 1504.790366] validate_chain+0x46a/0x570 [ 1504.790368] __lock_acquire+0x52d/0xbb0 [ 1504.790370] lock_acquire+0xd9/0x330 [ 1504.790371] mutex_lock_nested+0x4b/0xb0 [ 1504.790372] register_netdevice+0x52c/0x710 [ 1504.790374] iavf_finish_config+0xfa/0x240 [iavf] [ 1504.790379] process_one_work+0x248/0x6d0 [ 1504.790381] worker_thread+0x18d/0x330 [ 1504.790383] kthread+0x10e/0x250 [ 1504.790385] ret_from_fork+0x30/0x50 [ 1504.790387] ret_from_fork_asm+0x1a/0x30 [ 1504.790389] [ 1504.790389] other info that might help us debug this: [ 1504.790389] [ 1504.790389] Possible unsafe locking scenario: [ 1504.790389] [ 1504.790390] CPU0 CPU1 [ 1504.790391] ---- ---- [ 1504.790391] lock(&adapter->crit_lock); [ 1504.790393] lock(&dev->lock); [ 1504.790394] lock(&adapter->crit_lock); [ 1504.790395] lock(&dev->lock); [ 1504.790397] [ 1504.790397] *** DEADLOCK *** This appears to be caused by the change in commit 5fda3f35349b ("net: make netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in register_netdevice. The iAVF driver calls register_netdevice() from iavf_finish_config(), as a final stage of its state machine post-probe. It currently takes the RTNL lock, then the netdev lock, and then the device critical lock. This pattern is used throughout the driver. Thus there is a strong dependency that the crit_lock should not be acquired before the net device lock. The change to register_netdevice creates an ABBA lock order violation because the iAVF driver is holding the crit_lock while calling register_netdevice, which then takes the netdev_lock. It seems likely that future refactors could result in netdev APIs which hold the netdev_lock while calling into the driver. This means that we should not re-order the locks so that netdev_lock is acquired after the device private crit_lock. Instead, notice that we already release the netdev_lock prior to calling the register_netdevice. This flow only happens during the early driver initialization as we transition through the __IAVF_STARTUP, __IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc. Analyzing the places where we take crit_lock in the driver there are two sources: a) several of the work queue tasks including adminq_task, watchdog_task, reset_task, and the finish_config task. b) various callbacks which ultimately stem back to .ndo operations or ethtool operations. The latter cannot be triggered until after the netdevice registration is completed successfully. The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue that has a max limit of 1, and thus guarantees that only a single work item on the queue is executing at any given time, so none of the other work threads could be executing due to the ordered workqueue guarantees. The iavf_finish_config() function also does not do anything else after register_netdevice, unless it fails. It seems unlikely that the driver private crit_lock is protecting anything that register_netdevice() itself touches. Thus, to fix this ABBA lock violation, lets simply release the adapter->crit_lock as well as netdev_lock prior to calling register_netdevice(). We do still keep holding the RTNL lock as required by the function. If we do fail to register the netdevice, then we re-acquire the adapter critical lock to finish the transition back to __IAVF_INIT_CONFIG_ADAPTER. This ensures every call where both netdev_lock and the adapter->crit_lock are acquired under the same ordering. Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26ice: Avoid setting default Rx VSI twice in switchdev setupMarcin Szycik1-2/+1
As part of switchdev environment setup, uplink VSI is configured as default for both Tx and Rx. Default Rx VSI is also used by promiscuous mode. If promisc mode is enabled and an attempt to enter switchdev mode is made, the setup will fail because Rx VSI is already configured as default (rule exists). Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on echo 1 > /sys/class/net/$PF1/device/sriov_numvfs In switchdev setup, use ice_set_dflt_vsi() instead of plain ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if it's already configured. Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26ice: Fix deinitializing VF in error pathMarcin Szycik3-4/+10
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13Merge branch '200GbE' of ↵Jakub Kicinski4-14/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-02-11 (idpf, ixgbe, igc) For idpf: Sridhar fixes a couple issues in handling of RSC packets. Josh adds a call to set_real_num_queues() to keep queue count in sync. For ixgbe: Piotr removes missed IS_ERR() removal when ERR_PTR usage was removed. For igc: Zdenek Bouska fixes reporting of Rx timestamp with AF_XDP. Siang sets buffer type on empty frame to ensure proper handling. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Set buffer type for empty frames in igc_init_empty_frame igc: Fix HW RX timestamp when passed by ZC XDP ixgbe: Fix possible skb NULL pointer dereference idpf: call set_real_num_queues in idpf_open idpf: record rx queue in skb for RSC packets idpf: fix handling rsc packet with a single segment ==================== Link: https://patch.msgid.link/20250211214343.4092496-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 08:58:15 +0300