summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe
AgeCommit message (Collapse)AuthorFilesLines
2012-10-31Merge branch 'master' of ↵David S. Miller6-71/+228
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to ixgbe, ixgbevf, igbvf, igb and networking core (bridge). Most notably is the addition of support for local link multicast addresses in SR-IOV mode to the networking core. Also note, the ixgbe patch "ixgbe: Add support for pipeline reset" and "ixgbe: Fix return value from macvlan filter function" is revised based on community feedback. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31ixgbe: add setlink, getlink support to ixgbe and ixgbevfJohn Fastabend2-3/+59
This adds support for the net device ops to manage the embedded hardware bridge on ixgbe devices. With this patch the bridge mode can be toggled between VEB and VEPA to support stacking macvlan devices or using the embedded switch without any SW component in 802.1Qbg/br environments. Additionally, this adds source address pruning to the ixgbevf driver to prune any frames sent back from a reflective relay on the switch. This is required because the existing hardware does not support this. Without it frames get pushed into the stack with its own src mac which is invalid per 802.1Qbg VEPA definition. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-30ixgbe: reduce PTP rx path overheadJiri Benc1-2/+4
Hw timestamping code caused performance regression in ixgbe driver when the timestamping is not enabled. The culprit is IXGBE_READ_REG call in the Rx path which is executed for every received skb. This call is not needed when the timestamping is disabled or for non-ptp packets. netperf results: The ixgbe side of the connection was acting as a server, the netperf command line on the other side was: netperf -H 192.168.1.23 -T0,0 -t UDP_STREAM -l 20 The values below mean throughput as reported by netperf (local/remote), for 3 runs, with timestamping not enabled. 3.7.0-rc1+ with CONFIG_IXGBE_PTP off: 5373.83 / 3329.32 5721.88 / 3033.89 5653.42 / 3112.38 3.7.0-rc1+ with CONFIG_IXGBE_PTP on: 5233.64 / 1226.85 5448.67 / 1039.32 5421.36 / 1095.66 Patched 3.7.0-rc1+ with CONFIG_IXGBE_PTP on: 5594.72 / 2942.53 5428.95 / 3110.16 5343.56 / 3200.48 Reported-by: Jesper Brouer <jbrouer@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Andy Gospodarek <gospo@redhat.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30ixgbe: add/update descriptor maps in commentsJosh Hay1-6/+55
Adds/updates ASCII descriptor maps for 82598 and 82599 Tx/Rx descriptors. Current descriptor maps were out of date for 82598 and incorrect for 82599. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30ixgbe: Do not decrement budget in ixgbe_clean_rx_irqAlexander Duyck1-5/+4
This change makes it so that compare the total_rx_packets cleaned to budget instead of decrementing budget. The advantage to this approach is that budget can now be const and we only end up modifying total_rx_packets instead of modifying both it and budget. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30ixgbe: Return success or failure on VF MAC filter setGreg Rose1-1/+1
When setting a MAC filter for the VF the function should return a success or failure code, not the index of the new filter. It causes spurious NACK returns to the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30ixgbe: clean up the condition for turning on/off the laserEmil Tantilov1-23/+8
This patch simplifies the check for calling en/disable_tx_laser() function pointer. The pointer is only set on parts that can use it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30net, ixgbe: handle link local multicast addresses in SR-IOV modeJohn Fastabend1-1/+1
In SR-IOV mode the PF driver acts as the uplink port and is used to send control packets e.g. lldpad, stp, etc. eth0.1 eth0.2 eth0 VF VF PF | | | <-- stand-in for uplink | | | -------------------------- | Embedded Switch | -------------------------- | MAC <-- uplink But the embedded switch is setup to forward multicast addresses to all interfaces both VFs and PF and onto the physical link. This results in reserved MAC addresses used by control protocols to be forwarded over the switch onto the VF. In the LLDP case the PF sends an LLDPDU and it is currently being forwarded to all the VFs who then see the PF as a peer. This is incorrect. This patch adds the multicast addresses to the RAR table in the hardware to prevent this behavior. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30ixgbe: Fix return value from macvlan filter functionGreg Rose1-1/+2
The function to set the macvlan filter should return success or failure instead of the index of the filter. The message processing function was misinterpreting the index as a non-zero return code indicating failure and NACKing MAC filter set messages that actually succeeded. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-30ixgbe: Add support for pipeline resetDon Skidmore3-32/+153
Calling the ixgbe_reset_pipeline_82599 function will ensure a full pipeline reset on all 82599 devices. This is necessary to avoid possible link issues. Since this patch accomplishes this by modifying AUTOC.LMS we need to wrap all AUTOC writes when LESM is enabled. v2- fix LMS behaviour based on feedback by Martin Josefsson CC: Martin Josefsson <gandalf@mjufs.se> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Fix possible memory leak in ixgbe_set_ringparamAlexander Duyck1-52/+50
We were not correctly freeing the temporary rings on error in ixgbe_set_ring_param. In order to correct this I am unwinding a number of changes that were made in order to get things back to the original working form with modification for the current ring layouts. This approach has multiple advantages including a smaller memory footprint, and the fact that the interface is stopped while we are allocating the rings meaning that there is less potential for some sort of memory corruption on the ring. The only disadvantage I see with this approach is that on a Rx allocation failure we will report an error and only update the Tx rings. However the adapter should be fully functional in this state and the likelihood of such an error is very low. In addition it is not unreasonable to expect the user to need to recheck the ring configuration should they experience an error setting the ring sizes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Add function ixgbe_reset_pipeline_82599Don Skidmore2-0/+45
This patch adds a function that forces a full pipeline reset. This function will be used in following patches to completely reset the PHY during resets. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Drop unnecessary addition from ixgbe_set_rx_buffer_lenAlexander Duyck1-3/+0
We still had some code floating around from the old single buffer receive path. As a result we were adding VLAN_HLEN to max_frame although the resultant value was never used. Since that is the case we can drop this from the function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Correcting small packet paddingTushar Dave1-0/+1
Driver pad skb up to 17 bytes because of the HW requirement. However, that code implementation mess up the skb tail pointer after padding. This patch sets skb->tail correctly. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: using is_zero_ether_addr() to simplify the codeWei Yongjun1-2/+1
Using is_zero_ether_addr() to simplify the code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: (PTP) refactor init, cyclecounter and resetJacob Keller3-73/+66
This patch modifies when and where PTP registers and data are set. Previously a work-around was used inside cyclecounter_start in order to reset some of the time registers. This patch creates a new ixgbe_ptp_reset specifically for this purpose. The cyclecounter configuration has trimmed down to only modify what is necessary. Due to hardware conditions after probe and before open, PTP init has now moved into the ixgbe_open call. This allows the ptp device name in the sysfs to be the ethernet device name instead of the MAC address. The cyclecounter check flag is renamed to PTP_ENABLED and is used to prevent PTP init from happening when PTP has not been enabled. CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: add WOL support for new subdevice idEmil Tantilov2-0/+2
This patch adds a subdevice id for new 82599 device. The define is needed to allow enabling WOL support. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Enable support for VF API version 1.1 in the PF.Alexander Duyck1-8/+21
This change switches on the last few bits for us enabling version 1.1 VF support in the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Robert Garrett <RobertX.Garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Add support for GET_QUEUES message to get DCB configurationAlexander Duyck2-0/+52
This patch addresses several issues in regards to the combination of DCB and SR-IOV. Specifically it allows us to send information to the VF on which queues it should be using. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Add support for tracking the default user priority to SR-IOVAlexander Duyck3-20/+55
It is necessary to track the default user priority in the PF so that we can force it upon the VFs. The motivation behind this is to keep the VFs from getting access to user priorities meant for things like storage. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Add support for IPv6 and UDP to ixgbe_get_headlenAlexander Duyck1-1/+14
This change adds support for IPv6 and UDP to ixgbe_get_headlen. The advantage to this is that we can now handle ipv4/UDP, ipv6/TCP, and ipv6/UDP with a single memcpy instead of having to do them in multiple pskb_may_pull calls. A quick bit of testing shows that we increase throughput for a single session of netperf from 8800Mpbs to about 9300Mpbs in the case of ipv6/TCP. As such overall ipv6 performance should improve with this change. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Add mailbox API version negotiation support to ixgbe PFAlexander Duyck3-7/+48
This change allows us to add a mailbox versioning API. This will allow us to determine the features supported by the VFs from the PF. For example we will be implementing a version 1.1 API for the VF that will indicate that it can support us enabling Jumbo frames as the VF will support buffer chaining. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Robert Garrett <RobertX.Garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Move message handling routines into their own functionsAlexander Duyck1-93/+130
Instead of trying to maintain one large monolithic function that handles most of the different messages from the VF it makes sense to break the message handling function up so that we can just go through one switch statement and call the correct routine for a given message. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Enable jumbo frames support w/ SR-IOVAlexander Duyck3-31/+93
This change makes it so that we can have limited support for jumbo frames when SR-IOV is enabled. In order to accomplish this it is necessary to disable all VFs when the PF has jumbo frames enabled. If the VFs then request the same maximum frame size as the PF they will be re-enabled. A follow on patch will add a means of identifying when a VF can support spanning buffers and does not need to be worried about the actual supported max frame size. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Robert Garrett <robertx.e.garrett@intel.com> Tested-by: Sibai Li <Sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Initialize q_vector cpu and affinity masks correctlyAlexander Duyck1-2/+5
When enabling DCB the rings belonging to a q_vector on CPU 0 were not reinitializing their DCA registers. Upon closer inspection the issue was that the q_vector CPU variable was left at 0 resulting in the driver not updating the DCA registers. In order to guarantee the DCA registers will be updated I am adding a couple line change so that we initialize the CPU variable to -1 which will force a DCA update the first time an interrupt fires on that q_vector. In addition we were setting the CPU affinity hint to all CPUs when we were not specifying a CPU. Instead we should leave it as all zeros to avoid any possible confusion about the fact that we shouldn't be giving a hint. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-09ixgbe/ixgbevf: Limit maximum jumbo frame size to 9.5K to avoid Tx hangsAlexander Duyck1-1/+1
This change limits the PF/VF driver to 9.5K max jumbo frame size in order prevent a possible Tx hang in the adapter when sending frames between pools. All of the parts in ixgbe support a maximum frame of 15.5K for standard traffic, however with SR-IOV or DCB enabled they should be limiting the MTU size to 9.5K. Instead of adding extra checks which would have to change the MTU when we go into or out of these modes it is preferred to just use a standard 9.5K MTU limit for all modes so that this extra overhead can be avoided. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03ixgbe: add support for X540-AT1joshua.a.hay@intel.com3-0/+4
This patch adds device support for Ethernet Controller X540-AT1. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bitEmil Tantilov1-1/+1
The loop in ixgbe_reinit_fdir_tables_82599() only polls for up to 100us resulting in failures to update the FDIR filter table at 1Gbps and 10Gbps when under load. The poll times for FDIRCTRL.INIT_DONE are 55us, 550us and 5.5ms for 10Gbps, 1Gbps and 100Mbps respectively. This patch sets the wait time to be the same as in ixgbe_fdir_enable_82599() Reported-by: Bhushan <shashi-sm@users.sf.net> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03ixgbe: fix PTP ethtool timestamping functionJacob Keller1-4/+1
This patch fixes a development issue that occurred due to invalid modes reported in the ethtool get_ts_info function. The issue is resolved by removing unsupported modes from the Rx supported list. CC: stable <stable@vger.kernel.org> [3.5] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03ixgbe: (PTP) Fix PPS interrupt codeJacob Keller2-61/+48
Driver was enabling PPS interrupt even when user wasn't enabling it via the ptp core. This patch fixes the PPS so that it is only enabled explicitly, and moves the interrupt enabling code into the correct location in the driver Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Stable <stable@vger.kernel.org> [3.5] Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03ixgbe: Fix PTP X540 SDP alignment code for PPS signalJacob Keller1-89/+99
This patch fixes a bug in the method used for calculating the trigger alignment for SDP0 when enabling a PPS output on the X540. The alignment math wasn't properly taking into account the overflow cyclecounter, and was misaligning the pin triggers so that two X540 devices synced properly had mis-aligned SDP pins. This patch fixes the math to calculate the correct seconds alignment for the PPS signal. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds6-313/+705
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-02netlink: add attributes to fdb interfacestephen hemminger1-1/+1
Later changes need to be able to refer to neighbour attributes when doing fdb_add. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24ixgbe: Do not read the spoofed packets counter when not in IOV modeGreg Rose1-2/+3
The counter is not valid unless the controller is running in IOV mode. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22ptp: link the phc device to its parent deviceRichard Cochran1-1/+2
PTP Hardware Clock devices appear as class devices in sysfs. This patch changes the registration API to use the parent device, clarifying the clock's relationship to the underlying device. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20netdev: make address const in device address managementstephen hemminger1-2/+2
The internal functions for add/deleting addresses don't change their argument. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-16ixgbe: Improve statistics accuracy for DDP trafficMark Rustad1-16/+16
Noticed that the byte and packet count statistics are under- counting traffic handled by the DDP offload when there is more than one DDP completion processed in a single call to ixgbe_clean_rx_irq. This patch fixes that. I tried to optimize the setting of the rss value so that it only would have to be computed once, and only when there is a DDP completion present. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-16ixgbe: added reg_ops file to debugfsCatherine Sullivan1-0/+118
Added the reg_ops file to debugfs with commands to read and write a register to give users the ability to read and write individual registers on the fly. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-16ixgbe: added netdev_ops file to debugfsCatherine Sullivan1-2/+105
Added the netdev_ops file to debugfs with a command to call the ndo_tx_timeout function to give users the ability to simulate a tx_timeout call made by the kernel. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-16ixgbe: add debugfs supportCatherine Sullivan4-2/+106
This patch adds debugfs support to the ixgbe driver to give users the ability to access kernel information and to simulate kernel events. The filesystem is set up in the following driver/PCI-instance hierarchy: <debugfs> |-- ixgbe |-- PCI instance | |-- attribute files Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-16ixgbe: fix reporting of spoofed packetsEmil Tantilov1-1/+1
Use %u instead of %d to display u32 variable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Robert Garrett <RobertX.Garrett@intel.com> Tested-by: Robert Garrett <RobertX.Garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-16ixgbe: Fix VF rate limiting to correctly account for more queues per VFAlexander Duyck1-41/+59
This change fixes the assumptions of the rate limiting code that previously assumed that each VF would only ever have 2 queues. This update makes it so that we now use a queues per pool value that is determined based on the VMDq feature mask. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-By: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Robert Garrett <RobertX.Garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-16ixgbe: Fix ordering of things so that PF correctly configures its VLANsAlexander Duyck2-4/+10
The PF was not correctly registering any of its VLANs. As a result any VLAN tagged traffic from the VF would not be delivered to the PF because the VLAN was never assigned to the PF pool. In addition the VF was not allowed to receive traffic from VLAN 0 if it was allowed to receive untagged frames. This change corrects that so that it will correctly receive traffic from VLAN 0. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas1-1/+2
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-12Merge branch 'pci/stephen-const' into nextBjorn Helgaas1-1/+1
* pci/stephen-const: make drivers with pci error handlers const scsi: make pci error handlers const netdev: make pci_error_handlers const PCI: Make pci_error_handlers const
2012-09-08netdev: make pci_error_handlers constStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-05ixgbe: remove old init remnantEliezer Tamir1-5/+0
Remove a for loop that does nothing in ixgbe_probe(). This is a remnant from when we had IO bars (compare to the ixgb code). Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-23PCI: Introduce pci_pcie_type(dev) to replace pci_dev->pcie_typeYijing Wang1-1/+1
Introduce an inline function pci_pcie_type(dev) to extract PCIe device type from pci_dev->pcie_flags_reg field, and prepare for removing pci_dev->pcie_type. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2012-08-17ixgbe: Rewrite code related to configuring IFCS bit in Tx descriptorAlexander Duyck2-6/+11
This change updates the code related to configuring the transmit frame checksum. Specifically I have updated the code so that we can only skip inserting the checksum in the case that we are not performing some other offload that will modify the frame data. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-06 05:32:07 +0300