summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
AgeCommit message (Collapse)AuthorFilesLines
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller1-8/+8
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-23ixgbe: Use out-of-line function for register readsMark Rustad1-14/+1
Register reads are slow, so don't inline them. Size before: text data bss dec hex filename 226337 8280 552 235169 396a1 ixgbe.ko Size after: text data bss dec hex filename 194578 8280 552 203410 31a92 ixgbe.ko for about a 14% reduction in text size. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: Stop cacheing if the MNG FW enabledDon Skidmore1-0/+1
We use to cache whether the MNG FW was enabled, how since this isn't static we really need to verify with each check. This patch makes that change. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: add ixgbe_write_pci_cfg_word with ixgbe_removed checkJacob Keller1-0/+1
Inline with the current use for ixgbe_read_pci_cfg_word, create a similar function for writing PCI config, which checks whether the adapter has been removed first, if Live Error Recovery has been enabled. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-13ixgbe: add Linux NICS mailing list to contact infoJacob Keller1-0/+1
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-03ixgbe: Check config reads for removalMark Rustad1-1/+5
Configuration space reads should also be checked for removal. So add some checks related to config space accesses. v2: * Fixed indent Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: collect all 82599 AUTOC code in one functionDon Skidmore1-1/+4
When reading or writing to the AUTOC register on 82599 devices we need to preform various operations that aren't needed for other MAC types. This patch will collect all of that code into one place to minimize MAC checks in common code paths. While doing this I also clean up some cases where we weren't holding the SW/FW semaphore during a read/modify/write of AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ixgbe: Check for adapter removal on register writesMark Rustad1-2/+10
Prevent writes to an adapter that has been detected as removed by a previous failing read. This also fixes some include file ordering confusion that this patch revealed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ixgbe: Check register reads for adapter removalMark Rustad1-1/+18
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ixgbe: Use static inlines instead of macrosMark Rustad1-10/+26
Kernel coding standard prefers static inline functions instead of macros, so use them for register accessors. This is to prepare for adding LER, Live Error Recovery, checks to those accessors. Temporarily provide macros for calling the new static inline accessors until all references are changed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ixgbe: Check return value on eeprom readsMark Rustad1-1/+5
This patch fixes the possible use of uninitialized memory by checking the return value on eeprom reads. These issues were identified by static analysis. In many cases error messages will be produced so that corrupted eeprom issues will be more visible. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-31ixgbe: fix fc autoneg ethtool reporting.Don Skidmore1-1/+1
Originally ixgbe_device_supports_autoneg_fc() was only expected to be called by copper devices. This would lead to false information to be displayed via ethtool. v2: changed ixgbe_device_supports_autoneg_fc() to a bool function, it returns bool. Based on feedback from David Miller Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18ixgbe: create conversion functions from link_status to bus/speedJacob Keller1-0/+2
This patch cleans up ixgbe_get_bus_info_generic to call some conversion functions, which are used also in a follow on patch that needs to convert between the link_status PCIe config values into ixgbe's internal enum representations. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore1-1/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-07ixgbe: Use is_valid_ether_addrJoe Perches1-1/+0
Use the normal kernel test instead of a module specific one. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-22ixgbe: ethtool correctly identify autoneg settingJacob Keller1-0/+1
This patch enables ethtool to correctly identify flow control (pause frame) auto negotiation, as well as disallow enabling it when it is not supported. The ixgbe_device_supports_autoneg_fc function is exported and used for this purpose. There is also one minor cleanup of the device_supports_autoneg_fc by removing an unnecessary return statement. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23ixgbe: Add function ixgbe_reset_pipeline_82599Don Skidmore1-0/+1
This patch adds a function that forces a full pipeline reset. This function will be used in following patches to completely reset the PHY during resets. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-20ixgbe: Correctly set SAN MAC RAR pool to default pool of PFAlexander Duyck1-0/+1
This change corrects an issue in which an FCoE enabled adapter was always setting the FCoE SAN MAC MPSAR register to 0x1. This results in the first VF being assigned the SAN MAC address in the case of SR-IOV and as such is incorrect. To resolve this I am adding a new function that will update the SAN MAC pool address after reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-04ixgbe: Update link flow control to correctly handle multiple packet buffer DCBAlexander Duyck1-1/+1
This change updates the link flow control configuration so that we correctly set the link flow control settings for DCB. Previously we would have to call the fc_enable call 8 times, once for each packet buffer. If we move that logic into the fc_enable call itself we can avoid multiple unnecessary register writes. This change also corrects an issue in which we were only shifting the water marks for 82599 parts by 6 instead of 10. This was resulting in us only using 1/16 of the packet buffer when flow control was enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-04ixgbe: Make ixgbe_fc_autoneg return void and always set current_modeAlexander Duyck1-1/+1
This change makes it so that ixgbe_fc_autoneg is a void and always sets the current_mode. Previously if the link was down we would return an error, however there is no harm in simply treating a link down case as a case in which autoneg simply failed. This allows us to rely on the return value of the ixgbe_fc_enable call now since there should be no cases where it returns an error that would normally be ignored. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-02ixgbe: add support functions to access thermal dataDon Skidmore1-0/+13
Some 82599 adapters contain thermal data that we can get to via an i2c interface. These functions provide support to get at that data. A following patch will export this data. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-04ixgbe: consolidate reporting of MSIX vectors into a single functionEmil Tantilov1-1/+1
This patch modifies ixgbe_get_pcie_msix_count_generic() to support all current HW and removes the 82598 specific function. - change the type of ixgbe_get_pcie_msix_count_generic() to u16 - include a check to make sure the maximum allowed number of vectors is not exceeded. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-14ixgbe: Fix race condition where RX buffer could become corrupted.Atita Shirwaikar1-0/+2
There was a race condition in the reset path where the RX buffer could become corrupted during Fdir configuration.This is due to a HW bug.The fix right now is to lock the buffer while we do the fdir configuration.Since we were using similar workaround for another bug, I moved the existing code to a function and reused it.HW team also recommended that IXGBE_MAX_SECRX_POLL value be changed from 30 to 40.The erratum for this bug will be published in the next release 82599 Spec Update Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-03ixgbe: Fix typo in ixgbe_common.hMasanari Iida1-1/+1
Correct spelling "packtetbuf_num" to "packetbuf_num" in drivers/net/ethernet/intel/ixgbe/ixgbe_common.h Signed-off-by: Masanari Iida <standby24x7@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2012-02-03ixgbe: update copyright to 2012Don Skidmore1-1/+1
New year so bump the copyright date. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-23ixgbe: avoid HW lockup when adapter is reset with Tx work pendingEmil Tantilov1-1/+1
This change is meant to avoid a hardware lockup when Tx work is still pending and we request a reset. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11intel: Move the Intel wired LAN driversJeff Kirsher1-0/+145
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-09 03:58:03 +0300