summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)AuthorFilesLines
2023-04-13ice: Reset FDIR counter in FDIR init stageLingyu Liu1-0/+16
[ Upstream commit 83c911dc5e0e8e6eaa6431c06972a8f159bfe2fc ] Reset the FDIR counters when FDIR inits. Without this patch, when VF initializes or resets, all the FDIR counters are not cleaned, which may cause unexpected behaviors for future FDIR rule create (e.g., rule conflict). Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Lingyu Liu <lingyu.liu@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-13ice: fix wrong fallback logic for FDIRSimei Su1-3/+4
[ Upstream commit b4a01ace20f5c93c724abffc0a83ec84f514b98d ] When adding a FDIR filter, if ice_vc_fdir_set_irq_ctx returns failure, the inserted fdir entry will not be removed and if ice_vc_fdir_write_fltr returns failure, the fdir context info for irq handler will not be cleared which may lead to inconsistent or memory leak issue. This patch refines failure cases to resolve this issue. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Simei Su <simei.su@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()Jakob Koschel1-3/+5
[ Upstream commit e9a1cc2e4c4ee7c7e60fb26345618c2522a2a10f ] The code implicitly assumes that the list iterator finds a correct handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was pointing to an bogus memory location. For safety a separate list iterator variable should be used to make the != NULL check on 'old_agg_vsi_info' correct under any circumstances. Additionally Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop. Using it in a pointer comparison after the loop is undefined behavior and should be omitted if possible [1]. Fixes: 37c592062b16 ("ice: remove the VSI info from previous agg") Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jkl820.git@gmail.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06ice: add profile conflict check for AVF FDIRJunfeng Guo1-0/+73
[ Upstream commit 29486b6df3e6a63b57d1ed1dce06051267282ff4 ] Add profile conflict check while adding some FDIR rules to avoid unexpected flow behavior, rules may have conflict including: IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP} IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP} For example, when we create an FDIR rule for IPv4, this rule will work on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we then create an FDIR rule for IPv4_UDP and then destroy it, the first FDIR rule for IPv4 cannot work on pkt IPv4_UDP then. To prevent this unexpected behavior, we add restriction in software when creating FDIR rules by adding necessary profile conflict check. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06ice: Fix ice_cfg_rdma_fltr() to only update relevant fieldsBrett Creeley1-4/+22
[ Upstream commit d94dbdc4e0209b5e7d736ab696f8d635b034e3ee ] The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e724a0 ("ice: Implement iidc operations") Co-developed-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30ice: check if VF exists before mode checkMichal Swiatkowski1-4/+4
[ Upstream commit 83b49e7f63da88a1544cba2b2e40bfabb24bd203 ] Setting trust on VF should return EINVAL when there is no VF. Move checking for switchdev mode after checking if VF exists. Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22ice: avoid bonding causing auxiliary plug/unplug under RTNL lockDave Ertman2-20/+13
commit 248401cb2c4612d83eb0c352ee8103b78b8eb365 upstream. RDMA is not supported in ice on a PF that has been added to a bonded interface. To enforce this, when an interface enters a bond, we unplug the auxiliary device that supports RDMA functionality. This unplug currently happens in the context of handling the netdev bonding event. This event is sent to the ice driver under RTNL context. This is causing a deadlock where the RDMA driver is waiting for the RTNL lock to complete the removal. Defer the unplugging/re-plugging of the auxiliary device to the service task so that it is not performed under the RTNL lock context. Cc: stable@vger.kernel.org # 6.1.x Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave") Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22ice: xsk: disable txq irq before flushing hwMaciej Fijalkowski1-3/+2
[ Upstream commit b830c9642386867863ac64295185f896ff2928ac ] ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17ethernet: ice: avoid gcc-9 integer overflow warningArnd Bergmann1-4/+4
[ Upstream commit 8f5c5a790e3025d6eca96bf7ee5e3873dc92373f ] With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17ice: Fix DSCP PFC TLV creationDave Ertman1-1/+1
[ Upstream commit fef3f92e8a4214652d8f33f50330dc5a92efbf11 ] When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd73e50d ("ice: Add DSCP support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17ice: copy last block omitted in ice_get_module_eeprom()Petr Oros1-2/+4
[ Upstream commit 84cba1840e68430325ac133a11be06bfb2f7acd8 ] ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ .... Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ice: add missing checks for PF vsi typeJesse Brandeburg1-9/+8
[ Upstream commit 6a8d013e904ad9a66706fcc926ec9993bed7d190 ] There were a few places we had missed checking the VSI type to make sure it was definitely a PF VSI, before calling setup functions intended only for the PF VSI. This doesn't fix any explicit bugs but cleans up the code in a few places and removes one explicit != vsi->type check that can be superseded by this code (it's a super set) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPBSiddaraju DH1-1/+1
[ Upstream commit 8aa4318c3a122b8670bc09af142de3872ca63b88 ] The PHY provides only 39b timestamp. With current timing implementation, we discard lower 7b, leaving 32b timestamp. The driver reconstructs the full 64b timestamp by correlating the 32b timestamp with cached_time for performance. The reconstruction algorithm does both forward & backward interpolation. The 32b timeval has overflow duration of 2^32 counts ~= 4.23 second. Due to interpolation in both direction, its now ~= 2.125 second IIRC, going with at least half a duration, the cached_time is updated with periodic thread of 1 second (worst-case) periodicity. But the 1 second periodicity is based on System-timer. With PPB adjustments, if the 1588 timers increments at say double the rate, (2s in-place of 1s), the Nyquist rate/half duration sampling/update of cached_time with 1 second periodic thread will lead to incorrect interpolations. Hence we should restrict the PPB adjustments to at least half duration of cached_time update which translates to 500,000,000 PPB. Since the periodicity of the cached-time system thread can vary, it is good to have some buffer time and considering practicality of PPB adjustments, limiting the max_adj to 100,000,000. Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-13ice: fix lost multicast packets in promisc modeJesse Brandeburg1-0/+26
There was a problem reported to us where the addition of a VF with an IPv6 address ending with a particular sequence would cause the parent device on the PF to no longer be able to respond to neighbor discovery packets. In this case, we had an ovs-bridge device living on top of a VLAN, which was on top of a PF, and it would not be able to talk anymore (the neighbor entry would expire and couldn't be restored). The root cause of the issue is that if the PF is asked to be in IFF_PROMISC mode (promiscuous mode) and it had an ipv6 address that needed the 33:33:ff:00:00:04 multicast address to work, then when the VF was added with the need for the same multicast address, the VF would steal all the traffic destined for that address. The ice driver didn't auto-subscribe a request of IFF_PROMISC to the "multicast replication from other port's traffic" meaning that it won't get for instance, packets with an exact destination in the VF, as above. The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04, results in no packets for that multicast address making it to the PF (which is in promisc but NOT "multicast replication"). The fix is to enable "multicast promiscuous" whenever the driver is asked to enable IFF_PROMISC, and make sure to disable it when appropriate. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-13ice: Fix check for weight and priority of a scheduling nodeMichal Wilczynski1-2/+2
Currently checks for weight and priority ranges don't check incoming value from the devlink. Instead it checks node current weight or priority. This makes those checks useless. Change range checks in ice_set_object_tx_priority() and ice_set_object_tx_weight() to check against incoming priority an weight. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-11ice: xsk: Fix cleaning of XDP_TX framesLarysa Zaremba1-6/+9
Incrementation of xsk_frames inside the for-loop produces infinite loop, if we have both normal AF_XDP-TX and XDP_TXed buffers to complete. Split xsk_frames into 2 variables (xsk_frames and completed_frames) to eliminate this bug. Fixes: 29322791bc8b ("ice: xsk: change batched Tx descriptor cleaning") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07ice: switch: fix potential memleak in ice_add_adv_recipe()Zhang Changzhong1-1/+1
When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-07ice: Fix off by one in ice_tc_forward_to_queue()Dan Carpenter1-1/+1
The > comparison should be >= to prevent reading one element beyond the end of the array. The "vsi->num_rxq" is not strictly speaking the number of elements in the vsi->rxq_map[] array. The array has "vsi->alloc_rxq" elements and "vsi->num_rxq" is less than or equal to the number of elements in the array. The array is allocated in ice_vsi_alloc_arrays(). It's still an off by one but it might not access outside the end of the array. Fixes: 143b86f346c7 ("ice: Enable RX queue selection using skbedit action") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-07ice: Fix disabling Rx VLAN filtering with port VLAN enabledBrett Creeley1-1/+15
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN filtering will be disabled if the VF requests to enable promiscuous mode. When the VF is in a port VLAN, this is the incorrect behavior because it will allow the VF to receive traffic outside of its port VLAN domain. Fortunately this only resulted in the VF(s) receiving broadcast traffic outside of the VLAN domain because all of the VLAN promiscuous rules are based on the port VLAN ID. Fix this by setting the .disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on the VF. Also, make sure to make this fix for both Single VLAN Mode and Double VLAN Mode enabled devices. Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-07ice: fix out-of-bounds KASAN warning in virtchnlMichal Swiatkowski2-18/+12
KASAN reported: [ 9793.708867] BUG: KASAN: global-out-of-bounds in ice_get_link_speed+0x16/0x30 [ice] [ 9793.709205] Read of size 4 at addr ffffffffc1271b1c by task kworker/6:1/402 [ 9793.709222] CPU: 6 PID: 402 Comm: kworker/6:1 Kdump: loaded Tainted: G B OE 6.1.0+ #3 [ 9793.709235] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [ 9793.709245] Workqueue: ice ice_service_task [ice] [ 9793.709575] Call Trace: [ 9793.709582] <TASK> [ 9793.709588] dump_stack_lvl+0x44/0x5c [ 9793.709613] print_report+0x17f/0x47b [ 9793.709632] ? __cpuidle_text_end+0x5/0x5 [ 9793.709653] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.709986] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710317] kasan_report+0xb7/0x140 [ 9793.710335] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710673] ice_get_link_speed+0x16/0x30 [ice] [ 9793.711006] ice_vc_notify_vf_link_state+0x14c/0x160 [ice] [ 9793.711351] ? ice_vc_repr_cfg_promiscuous_mode+0x120/0x120 [ice] [ 9793.711698] ice_vc_process_vf_msg+0x7a7/0xc00 [ice] [ 9793.712074] __ice_clean_ctrlq+0x98f/0xd20 [ice] [ 9793.712534] ? ice_bridge_setlink+0x410/0x410 [ice] [ 9793.712979] ? __request_module+0x320/0x520 [ 9793.713014] ? ice_process_vflr_event+0x27/0x130 [ice] [ 9793.713489] ice_service_task+0x11cf/0x1950 [ice] [ 9793.713948] ? io_schedule_timeout+0xb0/0xb0 [ 9793.713972] process_one_work+0x3d0/0x6a0 [ 9793.714003] worker_thread+0x8a/0x610 [ 9793.714031] ? process_one_work+0x6a0/0x6a0 [ 9793.714049] kthread+0x164/0x1a0 [ 9793.714071] ? kthread_complete_and_exit+0x20/0x20 [ 9793.714100] ret_from_fork+0x1f/0x30 [ 9793.714137] </TASK> [ 9793.714151] The buggy address belongs to the variable: [ 9793.714158] ice_aq_to_link_speed+0x3c/0xffffffffffff3520 [ice] [ 9793.714632] Memory state around the buggy address: [ 9793.714642] ffffffffc1271a00: f9 f9 f9 f9 00 00 05 f9 f9 f9 f9 f9 00 00 02 f9 [ 9793.714656] ffffffffc1271a80: f9 f9 f9 f9 00 00 04 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714670] >ffffffffc1271b00: 00 00 00 04 f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9 [ 9793.714680] ^ [ 9793.714690] ffffffffc1271b80: 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714704] ffffffffc1271c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 The ICE_AQ_LINK_SPEED_UNKNOWN define is BIT(15). The value is bigger than both legacy and normal link speed tables. Add one element (0 - unknown) to both tables. There is no need to explicitly set table size, leave it empty. Fixes: 1d0e28a9be1f ("ice: Remove and replace ice speed defines with ethtool.h versions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-02-07ice: Do not use WQ_MEM_RECLAIM flag for workqueueAnirudh Venkataramanan1-1/+1
When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_release_driver_internal+0xfa/0x1c0 [ +0.000005] bus_remove_device+0x18a/0x260 [ +0.000007] device_del+0x2e5/0x650 [ +0.000005] ? __pfx_device_del+0x10/0x10 [ +0.000003] ? mutex_unlock+0x84/0xd0 [ +0.000004] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? _raw_spin_unlock+0x18/0x40 [ +0.000005] ice_unplug_aux_dev+0x52/0x70 [ice] [ +0.000160] ice_service_task+0x1309/0x14f0 [ice] [ +0.000134] ? __pfx___schedule+0x10/0x10 [ +0.000006] process_one_work+0x3b1/0x6c0 [ +0.000008] worker_thread+0x69/0x670 [ +0.000005] ? __kthread_parkme+0xec/0x110 [ +0.000007] ? __pfx_worker_thread+0x10/0x10 [ +0.000005] kthread+0x17f/0x1b0 [ +0.000005] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x29/0x50 [ +0.000009] </TASK> Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2023-01-27ice: Prevent set_channel from changing queues while RDMA activeDave Ertman5-19/+43
The PF controls the set of queues that the RDMA auxiliary_driver requests resources from. The set_channel command will alter that pool and trigger a reconfiguration of the VSI, which breaks RDMA functionality. Prevent set_channel from executing when RDMA driver bound to auxiliary device. Adding a locked variable to pass down the call chain to avoid double locking the device_lock. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-25ice: move devlink port creation/deletionPaul M Stillwell Jr2-11/+17
Commit a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") moved the code to create and destroy the devlink PF port. This was fine, but created a corner case issue in the case of ice_register_netdev() failing. In that case, the driver would end up calling ice_devlink_destroy_pf_port() twice. Additionally, it makes no sense to tie creation of the devlink PF port to the creation of the netdev so separate out the code to create/destroy the devlink PF port from the netdev code. This makes it a cleaner interface. Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10ice: Add check for kzallocJiasheng Jiang1-9/+14
Add the check for the return value of kzalloc in order to avoid NULL pointer dereference. Moreover, use the goto-label to share the clean code. Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10ice: Fix potential memory leak in ice_gnss_tty_write()Yuan Can1-0/+1
The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed. Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-22ice: xsk: do not use xdp_return_frame() on tx_buf->raw_bufMaciej Fijalkowski1-1/+1
Previously ice XDP xmit routine was changed in a way that it avoids xdp_buff->xdp_frame conversion as it is simply not needed for handling XDP_TX action and what is more it saves us CPU cycles. This routine is re-used on ZC driver to handle XDP_TX action. Although for XDP_TX on Rx ZC xdp_buff that comes from xsk_buff_pool is converted to xdp_frame, xdp_frame itself is not stored inside ice_tx_buf, we only store raw data pointer. Casting this pointer to xdp_frame and calling against it xdp_return_frame in ice_clean_xdp_tx_buf() results in undefined behavior. To fix this, simply call page_frag_free() on tx_buf->raw_buf. Later intention is to remove the buff->frame conversion in order to simplify the codebase and improve XDP_TX performance on ZC. Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Reported-and-tested-by: Robin Cowley <robin.cowley@thehutgroup.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@.intel.com> Link: https://lore.kernel.org/r/20221220175448.693999-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-09ice: reschedule ice_ptp_wait_for_offset_valid during resetJacob Keller1-1/+6
If the ice_ptp_wait_for_offest_valid function is scheduled to run while the driver is resetting, it will exit without completing calibration. The work function gets scheduled by ice_ptp_port_phy_restart which will be called as part of the reset recovery process. It is possible for the first execution to occur before the driver has completely cleared its resetting flags. Ensure calibration completes by rescheduling the task until reset is fully completed. Reported-by: Siddaraju DH <siddaraju.dh@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-09ice: make Tx and Rx vernier offset calibration independentSiddaraju DH3-173/+91
The Tx and Rx calibration and timestamp generation blocks are independent. However, the ice driver waits until both blocks are ready before configuring either block. This can result in delay of configuring one block because we have not yet received a packet in the other block. There is no reason to wait to finish programming Tx just because we haven't received a packet. Similarly there is no reason to wait to program Rx just because we haven't transmitted a packet. Instead of checking both offset status before programming either block, refactor the ice_phy_cfg_tx_offset_e822 and ice_phy_cfg_rx_offset_e822 functions so that they perform their own offset status checks. Additionally, make them also check the offset ready bit to determine if the offset values have already been programmed. Call the individual configure functions directly in ice_ptp_wait_for_offset_valid. The functions will now correctly check status, and program the offsets if ready. Once the offset is programmed, the functions will exit quickly after just checking the offset ready register. Remove the ice_phy_calc_vernier_e822 in ice_ptp_hw.c, as well as the offset valid check functions in ice_ptp.c entirely as they are no longer necessary. With this change, the Tx and Rx blocks will each be enabled as soon as possible without waiting for the other block to complete calibration. This can enable timestamps faster in setups which have a low rate of transmitted or received packets. In particular, it can stop a situation where one port never receives traffic, and thus never finishes calibration of the Tx block, resulting in continuous faults reported by the ptp4l daemon application. Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-09ice: only check set bits in ice_ptp_flush_tx_trackerJacob Keller1-9/+29
The ice_ptp_flush_tx_tracker function is called to clear all outstanding Tx timestamp requests when the port is being brought down. This function iterates over the entire list, but this is unnecessary. We only need to check the bits which are actually set in the ready bitmap. Replace this logic with for_each_set_bit, and follow a similar flow as in ice_ptp_tx_tstamp_cleanup. Note that it is safe to call dev_kfree_skb_any on a NULL pointer as it will perform a no-op so we do not need to verify that the skb is actually NULL. The new implementation also avoids clearing (and thus reading!) the PHY timestamp unless the index is marked as having a valid timestamp in the timestamp status bitmap. This ensures that we properly clear the status registers as appropriate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-09ice: handle flushing stale Tx timestamps in ice_ptp_tx_tstampJacob Keller2-36/+67
In the event of a PTP clock time change due to .adjtime or .settime, the ice driver needs to update the cached copy of the PHC time and also discard any outstanding Tx timestamps. This is required because otherwise the wrong copy of the PHC time will be used when extending the Tx timestamp. This could result in reporting incorrect timestamps to the stack. The current approach taken to handle this is to call ice_ptp_flush_tx_tracker, which will discard any timestamps which are not yet complete. This is problematic for two reasons: 1) it could lead to a potential race condition where the wrong timestamp is associated with a future packet. This can occur with the following flow: 1. Thread A gets request to transmit a timestamped packet, and picks an index and transmits the packet 2. Thread B calls ice_ptp_flush_tx_tracker and sees the index in use, marking is as disarded. No timestamp read occurs because the status bit is not set, but the index is released for re-use 3. Thread A gets a new request to transmit another timestamped packet, picks the same (now unused) index and transmits that packet. 4. The PHY transmits the first packet and updates the timestamp slot and generates an interrupt. 5. The ice_ptp_tx_tstamp thread executes and sees the interrupt and a valid timestamp but associates it with the new Tx SKB and not the one that actual timestamp for the packet as expected. This could result in the previous timestamp being assigned to a new packet producing incorrect timestamps and leading to incorrect behavior in PTP applications. This is most likely to occur when the packet rate for Tx timestamp requests is very high. 2) on E822 hardware, we must avoid reading a timestamp index more than once each time its status bit is set and an interrupt is generated by hardware. We do have some extensive checks for the unread flag to ensure that only one of either the ice_ptp_flush_tx_tracker or ice_ptp_tx_tstamp threads read the timestamp. However, even with this we can still have cases where we "flush" a timestamp that was actually completed in hardware. This can lead to cases where we don't read the timestamp index as appropriate. To fix both of these issues, we must avoid calling ice_ptp_flush_tx_tracker outside of the teardown path. Rather than using ice_ptp_flush_tx_tracker, introduce a new state bitmap, the stale bitmap. Start this as cleared when we begin a new timestamp request. When we're about to extend a timestamp and send it up to the stack, first check to see if that stale bit was set. If so, drop the timestamp without sending it to the stack. When we need to update the cached PHC timestamp out of band, just mark all currently outstanding timestamps as stale. This will ensure that once hardware completes the timestamp we'll ignore it correctly and avoid reporting bogus timestamps to userspace. With this change, we fix potential issues caused by calling ice_ptp_flush_tx_tracker during normal operation. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-09ice: cleanup allocations in ice_ptp_alloc_tx_trackerJacob Keller1-7/+11
The ice_ptp_alloc_tx_tracker function must allocate the timestamp array and the bitmap for tracking the currently in use indexes. A future change is going to add yet another allocation to this function. If these allocations fail we need to ensure that we properly cleanup and ensure that the pointers in the ice_ptp_tx structure are NULL. Simplify this logic by allocating to local variables first. If any allocation fails, then free everything and exit. Only update the ice_ptp_tx structure if all allocations succeed. This ensures that we have no side effects on the Tx structure unless all allocations have succeeded. Thus, no code will see an invalid pointer and we don't need to re-assign NULL on cleanup. This is safe because kernel "free" functions are designed to be NULL safe and perform no action if passed a NULL pointer. Thus its safe to simply always call kfree or bitmap_free even if one of those pointers was NULL. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-09ice: protect init and calibrating check in ice_ptp_request_tsJacob Keller2-6/+32
When requesting a new timestamp, the ice_ptp_request_ts function does not hold the Tx tracker lock while checking init and calibrating. This means that we might issue a new timestamp request just after the Tx timestamp tracker starts being deinitialized. This could lead to incorrect access of the timestamp structures. Correct this by moving the init and calibrating checks under the lock, and updating the flows which modify these fields to use the lock. Note that we do not need to hold the lock while checking for tx->init in ice_ptp_tx_tstamp. This is because the teardown function will use synchronize_irq after clearing the flag to ensure that the threaded interrupt completes. Either a) the tx->init flag will be cleared before the ice_ptp_tx_tstamp function starts, thus it will exit immediately, or b) the threaded interrupt will be executing and the synchronize_irq will wait until the threaded interrupt has completed at which point we know the init field has definitely been set and new interrupts will not execute the Tx timestamp thread function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: synchronize the misc IRQ when tearing down Tx trackerJacob Keller1-4/+6
Since commit 1229b33973c7 ("ice: Add low latency Tx timestamp read") the ice driver has used a threaded IRQ for handling Tx timestamps. This change did not add a call to synchronize_irq during ice_ptp_release_tx_tracker. Thus it is possible that an interrupt could occur just as the tracker is being removed. This could lead to a use-after-free of the Tx tracker structure data. Fix this by calling sychronize_irq in ice_ptp_release_tx_tracker after we've cleared the init flag. In addition, make sure that we re-check the init flag at the end of ice_ptp_tx_tstamp before we exit ensuring that we will stop polling for new timestamps once the tracker de-initialization has begun. Refactor the ts_handled variable into "more_timestamps" so that we can simply directly assign this boolean instead of relying on an initialized value of true. This makes the new combined check easier to read. With this change, the ice_ptp_release_tx_tracker function will now wait for the threaded interrupt to complete if it was executing while the init flag was cleared. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: check Tx timestamp memory register for ready timestampsJacob Keller4-12/+126
The PHY for E822 based hardware has a register which indicates which timestamps are valid in the PHY timestamp memory block. Each bit in the register indicates whether the associated index in the timestamp memory is valid. Hardware sets this bit when the timestamp is captured, and clears the bit when the timestamp is read. Use of this register is important as reading timestamp registers can impact the way that hardware generates timestamp interrupts. This occurs because the PHY has an internal value which is incremented when hardware captures a timestamp and decremented when software reads a timestamp. Reading timestamps which are not marked as valid still decrement the internal value and can result in the Tx timestamp interrupt not triggering in the future. To prevent this, use the timestamp memory value to determine which timestamps are ready to be read. The ice_get_phy_tx_tstamp_ready function reads this value. For E810 devices, this just always returns with all bits set. Skip any timestamp which is not set in this bitmap, avoiding reading extra timestamps on E822 devices. The stale check against a cached timestamp value is no longer necessary for PHYs which support the timestamp ready bitmap properly. E810 devices still need this. Introduce a new verify_cached flag to the ice_ptp_tx structure. Use this to determine if we need to perform the verification against the cached timestamp value. Set this to 1 for the E810 Tx tracker init function. Notice that many of the fields in ice_ptp_tx are simple 1 bit flags. Save some structure space by using bitfields of length 1 for these values. Modify the ICE_PTP_TS_VALID check to simply drop the timestamp immediately so that in an event of getting such an invalid timestamp the driver does not attempt to re-read the timestamp again in a future poll of the register. With these changes, the driver now reads each timestamp register exactly once, and does not attempt any re-reads. This ensures the interrupt tracking logic in the PHY will not get stuck. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: handle discarding old Tx requests in ice_ptp_tx_tstampJacob Keller1-63/+48
Currently the driver uses the PTP kthread to process handling and discarding of stale Tx timestamp requests. The function ice_ptp_tx_tstamp_cleanup is used for this. A separate thread creates complications for the driver as we now have both the main Tx timestamp processing IRQ checking timestamps as well as the kthread. Rather than using the kthread to handle this, simply check for stale timestamps within the ice_ptp_tx_tstamp function. This function must already process the timestamps anyways. If a Tx timestamp has been waiting for 2 seconds we simply clear the bit and discard the SKB. This avoids the complication of having separate threads polling, reducing overall CPU work. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: always call ice_ptp_link_change and make it voidJacob Keller3-21/+19
The ice_ptp_link_change function is currently only called for E822 based hardware. Future changes are going to extend this function to perform additional tasks on link change. Always call this function, moving the E810 check from the callers down to just before we call the E822-specific function required to restart the PHY. This function also returns an error value, but none of the callers actually check it. In general, the errors it produces are more likely systemic problems such as invalid or corrupt port numbers. No caller checks these, and so no warning is logged. Re-order the flag checks so that ICE_FLAG_PTP is checked first. Drop the unnecessary check for ICE_FLAG_PTP_SUPPORTED, as ICE_FLAG_PTP will not be set except when ICE_FLAG_PTP_SUPPORTED is set. Convert the port checks to WARN_ON_ONCE, in order to generate a kernel stack trace when they are hit. Convert the function to void since no caller actually checks these return values. Co-developed-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: fix misuse of "link err" with "link status"Jacob Keller1-1/+1
The ice_ptp_link_change function has a comment which mentions "link err" when referring to the current link status. We are storing the status of whether link is up or down, which is not an error. It is appears that this use of err accidentally got included due to an overzealous search and replace when removing the ice_status enum and local status variable. Fix the wording to use the correct term. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: Reset TS memory for all quadsKarol Kolacinski3-27/+42
In E822 products, the owner PF should reset memory for all quads, not only for the one where assigned lport is. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: Remove the E822 vernier "bypass" logicMilena Olech3-145/+14
The E822 devices support an extended "vernier" calibration which enables higher precision timestamps by accounting for delays in the PHY, and compensating for them. These delays are measured by hardware as part of its vernier calibration logic. The driver currently starts the PHY in "bypass" mode which skips the compensation. Then it later attempts to switch from bypass to vernier. This unfortunately does not work as expected. Instead of properly compensating for the delays, the hardware continues operating in bypass without the improved precision expected. Because we cannot dynamically switch between bypass and vernier mode, refactor the driver to always operate in vernier mode. This has a slight downside: Tx timestamp and Rx timestamp requests that occur as the very first packet set after link up will not complete properly and may be reported to applications as missing timestamps. This occurs frequently in test environments where traffic is light or targeted specifically at testing PTP. However, in practice most environments will have transmitted or received some data over the network before such initial requests are made. Signed-off-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-08ice: Use more generic names for ice_ptp_tx fieldsSergey Temerkhanov2-18/+19
Some supported devices have per-port timestamp memory blocks while others have shared ones within quads. Rename the struct ice_ptp_tx fields to reflect the block entities it works with Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-01net: devlink: let the core report the driver name instead of the driversVincent Mailhol1-6/+0
The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01ice: implement direct read for NVM and Shadow RAM regionsJacob Keller1-0/+69
Implement the .read handler for the NVM and Shadow RAM regions. This enables user space to read a small chunk of the flash without needing the overhead of creating a full snapshot. Update the documentation for ice to detail which regions have direct read support. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01ice: use same function to snapshot both NVM and Shadow RAMJacob Keller1-72/+23
The ice driver supports a region for both the flat NVM contents as well as the Shadow RAM which is a layer built on top of the flash during device initialization. These regions use an almost identical read function, except that the NVM needs to set the direct flag when reading, while Shadow RAM needs to read without the direct flag set. They each call ice_read_flat_nvm with the only difference being whether to set the direct flash flag. The NVM region read function also was fixed to read the NVM in blocks to avoid a situation where the firmware reclaims the lock due to taking too long. Note that the region snapshot function takes the ops pointer so the function can easily determine which region to read. Make use of this and re-use the NVM snapshot function for both the NVM and Shadow RAM regions. This makes Shadow RAM benefit from the same block approach as the NVM region. It also reduces code in the ice driver. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-16/+16
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23ice: Use ICE_RLAN_BASE_S instead of magic numberAnatolii Gerasymenko1-1/+1
Commit 72adf2421d9b ("ice: Move common functions out of ice_main.c part 2/7") moved an older version of ice_setup_rx_ctx() function with usage of magic number 7. Reimplement the commit 5ab522443bd1 ("ice: Cleanup magic number") to use ICE_RLAN_BASE_S instead of magic number. Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Fix configuring VIRTCHNL_OP_CONFIG_VSI_QUEUES with unbalanced queuesMarcin Szycik1-20/+17
Currently the VIRTCHNL_OP_CONFIG_VSI_QUEUES command may fail if there are less RX queues than TX queues requested. To fix it, only configure RXDID if RX queue exists. Fixes: e753df8fbca5 ("ice: Add support Flex RXD") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Accumulate ring statistics over resetBenjamin Mikailenko9-61/+351
Resets may occur with or without user interaction. For example, a TX hang or reconfiguration of parameters will result in a reset. During reset, the VSI is freed, freeing any statistics structures inside as well. This would create an issue for the user where a reset happens in the background, statistics set to zero, and the user checks ring statistics expecting them to be populated. To ensure this doesn't happen, accumulate ring statistics over reset. Define a new ring statistics structure, ice_ring_stats. The new structure lives in the VSI's parent, preserving ring statistics when VSI is freed. 1. Define a new structure vsi_ring_stats in the PF scope 2. Allocate/free stats only during probe, unload, or change in ring size 3. Replace previous ring statistics functionality with new structure Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Accumulate HW and Netdev statistics over resetBenjamin Mikailenko4-4/+37
Resets happen with or without user interaction. For example, incidents such as TX hang or a reconfiguration of parameters will result in a reset. During reset, hardware and software statistics were set to zero. This created an issue for the user where a reset happens in the background, statistics set to zero, and the user checks statistics expecting them to be populated. To ensure this doesn't happen, keep accumulating stats over reset. 1. Remove function calls which reset hardware and netdev statistics. 2. Do not rollover statistics in ice_stat_update40 during reset. Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Remove and replace ice speed defines with ethtool.h versionsBrett Creeley5-109/+69
The driver is currently using ICE_LINK_SPEED_* defines that mirror what ethtool.h defines, with one exception ICE_LINK_SPEED_UNKNOWN. This issue is fixed by the following changes: 1. replace ICE_LINK_SPEED_UNKNOWN with 0 because SPEED_UNKNOWN in ethtool.h is "-1" and that doesn't match the driver's expected behavior 2. transform ICE_LINK_SPEED_*MBPS to SPEED_* using static tables and fls()-1 to convert from BIT() to an index in a table. Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Check for PTP HW lock more frequentlyKarol Kolacinski1-5/+7
It was observed that PTP HW semaphore can be held for ~50 ms in worst case. SW should wait longer and check more frequently if the HW lock is held. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-31 00:25:44 +0300