summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)AuthorFilesLines
2021-04-15ice: Drop leading underscores in enum ice_pf_stateAnirudh Venkataramanan8-187/+187
Remove the leading underscores in enum ice_pf_state. This is not really communicating anything and is unnecessary. No functional change. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-15ice: use kernel definitions for IANA protocol ports and ether-typesBruce Allan4-8/+8
The well-known IANA protocol port 3260 (iscsi-target 0x0cbc) and the ether-types 0x8906 (ETH_P_FCOE) and 0x8914 (ETH_P_FIP) are already defined in kernel header files. Use those definitions instead of open-coding the same. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ice: Fix potential infinite loop when using u8 loop counterColin Ian King1-2/+2
A for-loop is using a u8 loop counter that is being compared to a u32 cmp_dcbcfg->numapp to check for the end of the loop. If cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap around to zero and hence an infinite loop occurs. Fix this by making counter j the same type as cmp_dcbcfg->numapp. Addresses-Coverity: ("Infinite loop") Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski10-41/+87
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-08ice: fix memory leak of aRFS after resuming from suspendYongxin Liu1-0/+1
In ice_suspend(), ice_clear_interrupt_scheme() is called, and then irq_free_descs() will be eventually called to free irq and its descriptor. In ice_resume(), ice_init_interrupt_scheme() is called to allocate new irqs. However, in ice_rebuild_arfs(), struct irq_glue and struct cpu_rmap maybe cannot be freed, if the irqs that released in ice_suspend() were reassigned to other devices, which makes irq descriptor's affinity_notify lost. So call ice_free_cpu_rx_rmap() before ice_clear_interrupt_scheme(), which can make sure all irq_glue and cpu_rmap can be correctly released before corresponding irq and descriptor are released. Fix the following memory leak. unreferenced object 0xffff95bd951afc00 (size 512): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 18 00 00 00 18 00 18 00 70 fc 1a 95 bd 95 ff ff ........p....... 00 00 ff ff 01 00 ff ff 02 00 ff ff 03 00 ff ff ................ backtrace: [<0000000072e4b914>] __kmalloc+0x336/0x540 [<0000000054642a87>] alloc_cpu_rmap+0x3b/0xb0 [<00000000f220deec>] ice_set_cpu_rx_rmap+0x6a/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff95bd81b0a2a0 (size 96): comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s) hex dump (first 32 bytes): 38 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 8............... b0 a2 b0 81 bd 95 ff ff b0 a2 b0 81 bd 95 ff ff ................ backtrace: [<00000000582dd5c5>] kmem_cache_alloc_trace+0x31f/0x4c0 [<000000002659850d>] irq_cpu_rmap_add+0x25/0xe0 [<00000000495a3055>] ice_set_cpu_rx_rmap+0xb4/0x110 [ice] [<000000002370a632>] ice_probe+0x941/0x1180 [ice] [<00000000d692edba>] local_pci_probe+0x47/0xa0 [<00000000503934f0>] work_for_cpu_fn+0x1a/0x30 [<00000000555a9e4a>] process_one_work+0x1dd/0x410 [<000000002c4b414a>] worker_thread+0x221/0x3f0 [<00000000bb2b556b>] kthread+0x14c/0x170 [<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30 Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove unnecessary blank lineTony Nguyen1-1/+0
Checkpatch reports the following, fix it. ----------------------------------------- drivers/net/ethernet/intel/ice/ice_main.c ----------------------------------------- CHECK:BRACES: Blank lines aren't necessary before a close brace '}' FILE: drivers/net/ethernet/intel/ice/ice_main.c:455: + +} Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-04-08ice: Remove unnecessary checks in add/kill_vid ndo opsBrett Creeley1-12/+0
Currently the driver is doing two unnecessary checks. First both ops are checking if the VLAN ID passed in is less than VLAN_N_VID and second both ops are checking to see if a port VLAN is configured on the VSI. The first check is already handled by the 8021q driver so this is an unnecessary check. The second check is unnecessary because the PF VSI is never put into a port VLAN. Remove these checks. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove rx_gro_dropped statAnirudh Venkataramanan4-6/+1
Tracking of the rx_gro_dropped statistic was removed in commit f73fc40327c0 ("ice: drop dead code in ice_receive_skb()"). Remove the associated variables and its reporting to ethtool stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Use local variable instead of pointer derefsAnirudh Venkataramanan1-15/+12
Replace multiple instances of vsi->back and pi->phy with equivalent local variables Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove unnecessary variableAnirudh Venkataramanan1-6/+1
In ice_init_phy_user_cfg, vsi is used only to get to hw. Remove this and just use pi->hw Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Limit forced overrides based on FW versionJeb Cramer1-12/+2
Beyond a specific version of firmware, there is no need to provide override values to the firmware when setting PHY capabilities. In this case, we do not need to indicate whether we're in Strict or Lenient Link Mode. In the case of translating capabilities to the configuration structure, the module compliance enforcement is already correctly set by firmware, so the extra code block is redundant. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Use default configuration mode for PHY configurationAnirudh Venkataramanan6-42/+103
Recent firmware supports a new "get PHY capabilities" mode ICE_AQC_REPORT_DFLT_CFG which makes it unnecessary for the driver to track and apply NVM based default link overrides. If FW AQ API version supports it, use Report Default Configuration. Add check function for Report Default Configuration support and update accordingly. Also change adv_phy_type_[lo|hi] to advert_phy_type[lo|hi] for clarity. Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Replace some memsets and memcpys with assignmentAnirudh Venkataramanan1-7/+3
In ice_set_link_ksettings, use assignment instead of memset/memcpy where possible Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Fix error return codes in ice_set_link_ksettingsAnirudh Venkataramanan1-7/+7
Return more appropriate error codes so that the right error message is communicated to the user by ethtool. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Rename a couple of variablesAnirudh Venkataramanan1-25/+25
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to 'pi'. This is more consistent with similar usages elsewhere in the driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Remove unnecessary checker loopAnirudh Venkataramanan1-9/+1
The loop checking for PF VSI doesn't make any sense. The VSI type backing the netdev passed to ice_set_link_ksettings will always be of type ICE_PF_VSI. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Ignore EMODE return for opcode 0x0605Anirudh Venkataramanan4-38/+59
When link is owned by manageability, the driver is not allowed to fiddle with link. FW returns ICE_AQ_RC_EMODE if the driver attempts to do so. This patch adds a new function ice_set_link which abstracts the call to ice_aq_set_link_restart_an and provides a clean way to turn on/off link. While making this change, I also spotted that an int variable was being used to hold both an ice_status return code and the Linux errno return code. This pattern more often than not results in the driver inadvertently returning ice_status back to kernel which is a major boo-boo. Clean it up. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Align macro names to the specificationAnirudh Venkataramanan4-23/+24
For get PHY abilities AQ, the specification defines "report modes" as "with media", "without media" and "active configuration". For clarity, rename macros to align with the specification. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Modify recursive way of adding nodesVictor Raj1-53/+77
Remove the recursive way of adding the nodes to the layer in order to reduce the stack usage. Instead the algorithm is modified to use a while loop. The previous code was scanning recursively the nodes horizontally. The total stack consumption will be based on number of nodes present on that layer. In some cases it can consume more stack. Signed-off-by: Victor Raj <victor.raj@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08ice: Re-send some AQ commands, as result of EBUSY AQ errorChinh T Cao3-2/+84
Retry sending some AQ commands, as result of EBUSY AQ error. ice_aqc_opc_get_link_topo ice_aqc_opc_lldp_stop ice_aqc_opc_lldp_start ice_aqc_opc_lldp_filter_ctrl This change follows the latest guidelines from HW team. It is better to retry the same AQ command several times, as the result of EBUSY, instead of returning error to the caller right away. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Correct comment block styleTony Nguyen1-2/+1
The following is reported by checkpatch, correct it. ----------------------------------------------- drivers/net/ethernet/intel/ice/ice_adminq_cmd.h ----------------------------------------------- WARNING:NETWORKING_BLOCK_COMMENT_STYLE: networking block comments don't use an empty /* line, use /* Comment... FILE: drivers/net/ethernet/intel/ice/ice_adminq_cmd.h:1428: +/* + * Send to PF command (indirect 0x0801) ID is only used by PF Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-04-01ice: cleanup style issuesBruce Allan3-7/+7
A few style issues reported by checkpatch have snuck into the code; resolve the style issues. COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Consolidate VSI state and flagsAnirudh Venkataramanan5-46/+47
struct ice_vsi has two fields, state and flags which seem to be serving the same purpose. Consolidate them into one field 'state'. enum ice_state is used to represent state information of the PF. While some of these enum values can be use to represent VSI state, it makes more sense to represent VSI state with its own enum. So derive a new enum ice_vsi_state from ice_vsi_flags and ice_state and use it. Also rename enum ice_state to ice_pf_state for clarity. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Refactor ice_set/get_rss into LUT and key specific functionsBrett Creeley5-117/+117
Currently ice_set/get_rss are used to set/get the RSS LUT and/or RSS key. However nearly everywhere these functions are called only the LUT or key are set/get. Also, making this change reduces how many things ice_set/get_rss are doing. Fix this by adding ice_set/get_rss_lut and ice_set/get_rss_key functions. Also, consolidate all calls for setting/getting the RSS LUT and RSS Key to use ice_set/get_rss_lut() and ice_set/get_rss_key(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Refactor get/set RSS LUT to use struct parameterBrett Creeley6-42/+62
Update ice_aq_get_rss_lut() and ice_aq_set_rss_lut() to take a new structure ice_aq_get_set_rss_params instead of passing individual parameters. This is done for 2 reasons: 1. Reduce the number of parameters passed to the functions. 2. Reduce the amount of change required if the arguments ever need to be updated in the future. Also, reduce duplicate code that was checking for an invalid vsi_handle and lut parameter by moving the checks to the lower level __ice_aq_get_set_rss_lut(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Change ice_vsi_setup_q_map() to not depend on RSSBrett Creeley2-34/+17
Currently, ice_vsi_setup_q_map() depends on the VSI's rss_size. However, the Rx Queue Mapping section of the VSI context has no dependency on RSS. Instead, limit the maximum number of Rx queues per TC based on the Rx Queue mapping section of the VSI context, which currently allows for up to 256 Rx queues per TC. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: rename ptype bitmapQi Zhang1-8/+8
Align all ptype bitmap to follow ice_ptypes_xxx prefix. Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: correct memory allocation callBruce Allan1-1/+1
Use *malloc() instead of *calloc() when allocating only a single object as opposed to an array of objects. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Check for bail out condition earlyAnirudh Venkataramanan1-5/+5
Check for bail out condition before calling ice_aq_sff_eeprom Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: remove unnecessary duplicated AQ command flag settingBruce Allan1-1/+1
Commit a012dca9f7a2 ("ice: add ethtool -m support for reading i2c eeprom modules") unnecessarily added the ICE_AQ_FLAG_BUF flag to the descriptor when sending the indirect Read/Write SFF EEPROM AQ command. The flag is already added later in the code flow for all indirect AQ commands, i.e. commands that provide an additional data buffer. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: change link misconfiguration messagePaul Greenwalt1-1/+1
Change link misconfiguration message since the configuration could be intended by the user. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: handle increasing Tx or Rx ring sizesPaul M Stillwell Jr2-33/+92
There is an issue when the Tx or Rx ring size increases using 'ethtool -L ...' where the new rings don't get the correct ITR values because when we rebuild the VSI we don't know that some of the rings may be new. Fix this by looking at the original number of rings and determining if the rings in ice_vsi_rebuild_set_coalesce() were not present in the original rings received in ice_vsi_rebuild_get_coalesce(). Also change the code to return an error if we can't allocate memory for the coalesce data in ice_vsi_rebuild(). Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Update to use package info from ice segmentDan Nowlin4-22/+36
There are two package versions in the package binary. Today, these two version numbers are the same. However, in the future that may change. Update code to use the package info from the ice segment metadata section, which is the package information that is actually downloaded to the firmware during the download package process. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Delay netdev registrationAnirudh Venkataramanan2-52/+47
Once a netdev is registered, the corresponding network interface can be immediately used by userspace utilities (like say NetworkManager). This can be problematic if the driver technically isn't fully up yet. Move netdev registration to the end of probe, as by this time the driver data structures and device will be initialized as expected. However, delaying netdev registration causes a failure in the aRFS flow where netdev->reg_state == NETREG_REGISTERED condition is checked. It's not clear why this check was added to begin with, so remove it. Local testing didn't indicate any issues with this change. The state bit check in ice_open was put in as a stop-gap measure to prevent a premature interface up operation. This is no longer needed, so remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01ice: Add Support for XPSBenita Bose2-0/+29
Enable and configure XPS. The driver code implemented sets up the Transmit Packet Steering Map, which in turn will be used by the kernel in queue selection during Tx. Signed-off-by: Benita Bose <benita.bose@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Cleanup fltr list in case of allocation issuesRobert Malz1-1/+2
When ice_remove_vsi_lkup_fltr is called, by calling ice_add_to_vsi_fltr_list local copy of vsi filter list is created. If any issues during creation of vsi filter list occurs it up for the caller to free already allocated memory. This patch ensures proper memory deallocation in these cases. Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions") Signed-off-by: Robert Malz <robertx.malz@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Use port number instead of PF ID for WoLAnirudh Venkataramanan3-8/+7
As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Fix for dereference of NULL pointerJacek Bułatek1-5/+7
Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com> Co-developed-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: remove DCBNL_DEVRESET bit from PF stateDave Ertman3-4/+0
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: fix memory allocation callBruce Allan1-1/+1
Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: prevent ice_open and ice_stop during resetKrzysztof Goreczny3-2/+31
There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Recognize 860 as iSCSI port in CEE modeChinh T Cao2-9/+30
iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Increase control queue timeoutFabio Pricoco1-2/+2
250 msec timeout is insufficient for some AQ commands. Advice from FW team was to increase the timeout. Increase to 1 second. Fixes: 7ec59eeac804 ("ice: Add support for control queues") Signed-off-by: Fabio Pricoco <fabio.pricoco@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Continue probe on link/PHY errorsAnirudh Venkataramanan1-9/+6
An incorrect NVM update procedure can result in the driver failing probe. In this case, the recommended resolution method is to update the NVM using the right procedure. However, if the driver fails probe, the user will not be able to update the NVM. So do not fail probe on link/PHY errors. Fixes: 1a3571b5938c ("ice: restore PHY settings on media insertion") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-26Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-8/+7
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-24/+27
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23ice: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-23ice: Fix prototype warningsTony Nguyen6-8/+8
Correct reported warnings for "warning: expecting prototype for ... Prototype was for ... instead" Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
2021-03-22ice: Check FDIR program status for AVFQi Zhang7-16/+541
Enable returning FDIR completion status by checking the ctrl_vsi Rx queue descriptor value. To enable returning FDIR completion status from ctrl_vsi Rx queue, COMP_Queue and COMP_Report of FDIR filter programming descriptor needs to be properly configured. After program request sent to ctrl_vsi Tx queue, ctrl_vsi Rx queue interrupt will be triggered and completion status will be returned. Driver will first issue request in ice_vc_fdir_add_fltr(), then pass FDIR context to the background task in interrupt service routine ice_vc_fdir_irq_handler() and finally deal with them in ice_flush_fdir_ctx(). ice_flush_fdir_ctx() will check the descriptor's value, fdir context, and then send back virtual channel message to VF by calling ice_vc_add_fdir_fltr_post(). An additional timer will be setup in case of hardware interrupt timeout. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add more FDIR filter type for AVFQi Zhang4-18/+545
FDIR for AVF can forward - L2TPV3 packets by matching session id. - IPSEC ESP packets by matching security parameter index. - IPSEC AH packets by matching security parameter index. - NAT_T ESP packets by matching security parameter index. - Any PFCP session packets(s field is 1). Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 17:40:38 +0300