summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2025-09-27ethtool: add FEC bins histogram reportVadim Fedorenko1-1/+3
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024 clarifies it a bit further. Implement reporting interface through as addition to FEC stats available in ethtool. Drivers can leave bin counter uninitialized if per-lane values are provided. In this case the core will recalculate summ for the bin. Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-19ice: add E830 Earliest TxTime First Offload supportPaul Greenwalt1-5/+9
E830 supports Earliest TxTime First (ETF) hardware offload, which is configured via the ETF Qdisc on a per-queue basis (see tc-etf(8)). ETF introduces a new Tx flow mechanism that utilizes a timestamp ring (tstamp_ring) alongside the standard Tx ring. This timestamp ring is used to indicate when hardware will transmit a packet. Tx Time is supported on the first 2048 Tx queues of the device, and the NVM image limits the maximum number of Tx queues to 2048 for the device. The allocation and initialization of the timestamp ring occur when the feature is enabled on a specific Tx queue via tc-etf. The requested Tx Time queue index cannot be greater than the number of Tx queues (vsi->num_txq). To support ETF, the following flags and bitmap are introduced: - ICE_F_TXTIME: Device feature flag set for E830 NICs, indicating ETF support. - txtime_txqs: PF-level bitmap set when ETF is enabled and cleared when disabled for a specific Tx queue. It is used by ice_is_txtime_ena() to check if ETF is allocated and configured on any Tx queue, which is checked during Tx ring allocation. - ICE_TX_FLAGS_TXTIME: Per Tx ring flag set when ETF is allocated and configured for a specific Tx queue. It determines ETF status during packet transmission and is checked by ice_is_txtime_ena() to verify if ETF is enabled on any Tx queue. Due to a hardware issue that can result in a malicious driver detection event, additional timestamp descriptors are required when wrapping around the timestamp ring. Up to 64 additional timestamp descriptors are reserved, reducing the available Tx descriptors. To accommodate this, ICE_MAX_NUM_DESC_BY_MAC is introduced, defining: - E830: Maximum Tx descriptor count of 8096 (8K - 32 - 64 for timestamp fetch descriptors). - E810 and E82X: Maximum Tx descriptor count of 8160 (8K - 32). Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Co-developed-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24ice: use libie_aq_strMichal Swiatkowski1-6/+6
Simple: s/ice_aq_str/libie_aq_str Add libie_aminq module in ice Kconfig. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: add 40G speed to Admin Command GET PORT OPTIONAleksandr Loktionov1-1/+2
Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code to process this new option in both the devlink and the Admin Queue Command GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on. This feature allows the driver to correctly report configuration options for 2x40G on E823 and other cards in the future via devlink. Example command: devlink port split pci/0000:01:00.0/0 count 2 Example dmesg: ice 0000:01:00.0: Available port split options and max port speeds (Gbps): ice 0000:01:00.0: Status Split Quad 0 Quad 1 ice 0000:01:00.0: count L0 L1 L2 L3 L4 L5 L6 L7 ice 0000:01:00.0: 2 40 - - - 40 - - - ice 0000:01:00.0: 2 50 - 50 - - - - - ice 0000:01:00.0: 4 25 25 25 25 - - - - ice 0000:01:00.0: 4 25 25 - - 25 25 - - ice 0000:01:00.0: Active 8 10 10 10 10 10 10 10 10 ice 0000:01:00.0: 1 100 - - - - - - - Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-08eth: ice: drop the dead code related to rss_contextsJakub Kicinski1-25/+3
ICE appears to have some odd form of rss_context use plumbed in for .get_rxfh. The .set_rxfh side does not support creating contexts, however, so this must be dead code. For at least a year now (since commit 7964e7884643 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")) we have not been calling .get_rxfh with a non-zero rss_context. We just get the info from the RSS XArray under dev->ethtool. Remove what must be dead code in the driver, clear the support flags. Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250707184115.2285277-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17eth: ice: migrate to new RXFH callbacksJakub Kicinski1-41/+18
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). I'm deleting all the boilerplate kdoc from the affected functions. It is somewhere between pointless and incorrect, just a burden for people refactoring the code. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Joe Damato <joe@dama.to> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250614180907.4167714-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09ice: add link_down_events statisticMartyna Szapar-Mudlaw1-0/+10
Introduce a link_down_events counter to the ice driver, incremented each time the link transitions from up to down. This counter can help diagnose issues related to link stability, such as port flapping or unexpected link drops. The value is exposed via ethtool's get_link_ext_stats() interface. Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-05-13Merge branch 'for-next' of ↵Jakub Kicinski1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux Tony Nguyen says: ==================== Prepare for Intel IPU E2000 (GEN3) This is the first part in introducing RDMA support for idpf. ---------------------------------------------------------------- Tatyana Nikolova says: To align with review comments, the patch series introducing RDMA RoCEv2 support for the Intel Infrastructure Processing Unit (IPU) E2000 line of products is going to be submitted in three parts: 1. Modify ice to use specific and common IIDC definitions and pass a core device info to irdma. 2. Add RDMA support to idpf and modify idpf to use specific and common IIDC definitions and pass a core device info to irdma. 3. Add RDMA RoCEv2 support for the E2000 products, referred to as GEN3 to irdma. This first part is a 5 patch series based on the original "iidc/ice/irdma: Update IDC to support multiple consumers" patch to allow for multiple CORE PCI drivers, using the auxbus. Patches: 1) Move header file to new name for clarity and replace ice specific DSCP define with a kernel equivalent one in irdma 2) Unify naming convention 3) Separate header file into common and driver specific info 4) Replace ice specific DSCP define with a kernel equivalent one in ice 5) Implement core device info struct and update drivers to use it ---------------------------------------------------------------- v1: https://lore.kernel.org/20250505212037.2092288-1-anthony.l.nguyen@intel.com IWL reviews: [v5] https://lore.kernel.org/20250416021549.606-1-tatyana.e.nikolova@intel.com [v4] https://lore.kernel.org/20250225050428.2166-1-tatyana.e.nikolova@intel.com [v3] https://lore.kernel.org/20250207194931.1569-1-tatyana.e.nikolova@intel.com [v2] https://lore.kernel.org/20240824031924.421-1-tatyana.e.nikolova@intel.com [v1] https://lore.kernel.org/20240724233917.704-1-tatyana.e.nikolova@intel.com * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux: iidc/ice/irdma: Update IDC to support multiple consumers ice: Replace ice specific DSCP mapping num with a kernel define iidc/ice/irdma: Break iidc.h into two headers iidc/ice/irdma: Rename to iidc_* convention iidc/ice/irdma: Rename IDC header file ==================== Link: https://patch.msgid.link/20250509200712.2911060-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-09iidc/ice/irdma: Update IDC to support multiple consumersDave Ertman1-4/+4
In preparation of supporting more than a single core PCI driver for RDMA, move ice specific structs like qset_params, qos_info and qos_params from iidc_rdma.h to iidc_rdma_ice.h. Previously, the ice driver was just exporting its entire PF struct to the auxiliary driver, but since each core driver will have its own different PF struct, implement a universal struct that all core drivers can provide to the auxiliary driver through the probe call. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11ice: receive LLDP on trusted VFsMateusz Pacuszka1-1/+1
When a trusted VF tries to configure an LLDP multicast address, configure a rule that would mirror the traffic to this VF, untrusted VFs are not allowed to receive LLDP at all, so the request to add LLDP MAC address will always fail for them. Add a forwarding LLDP filter to a trusted VF when it tries to add an LLDP multicast MAC address. The MAC address has to be added after enabling trust (through restarting the LLDP service). Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Co-developed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-26ethtool: Symmetric OR-XOR RSS hashGal Pressman1-1/+1
Add an additional type of symmetric RSS hash type: OR-XOR. The "Symmetric-OR-XOR" algorithm transforms the input as follows: (SRC_IP | DST_IP, SRC_IP ^ DST_IP, SRC_PORT | DST_PORT, SRC_PORT ^ DST_PORT) Change 'cap_rss_sym_xor_supported' to 'supported_input_xfrm', a bitmap of supported RXH_XFRM_* types. Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250224174416.499070-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-05ice: get rid of num_lan_msix fieldMichal Swiatkowski1-4/+2
Remove the field to allow having more queues than MSI-X on VSI. As default the number will be the same, but if there won't be more MSI-X available VSI can run with at least one MSI-X. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: count combined queues using Rx/Tx countMichal Swiatkowski1-2/+1
Previous implementation assumes that there is 1:1 matching between vectors and queues. It isn't always true. Get minimum value from Rx/Tx queues to determine combined queues number. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: remove invalid parameter of equalizerMateusz Polchlopek1-1/+0
It occurred that in the commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") the invalid DRATE parameter for reading has been added. The output of the command: $ ethtool -d <ethX> returns the garbage value in the place where DRATE value should be stored. Remove mentioned parameter to prevent return of corrupted data to userspace. Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-13ice: extend dump serdes equalizer values featureMateusz Polchlopek1-0/+17
Extend the work done in commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") by adding the new set of Rx registers that can be read using command: $ ethtool -d interface_name Rx equalization parameters are E810 PHY registers used by end user to gather information about configuration and status to debug link and connection issues in the field. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-13ice: rework of dump serdes equalizer values featureMateusz Polchlopek1-66/+27
Refactor function ice_get_tx_rx_equa() to iterate over new table of params instead of multiple calls to ice_aq_get_phy_equalization(). Subsequent commit will extend that function by add more serdes equalizer values to dump. Shorten the fields of struct ice_serdes_equalization_to_ethtool for readability purposes. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-09ice: Implement ethtool reset supportWojciech Drewek1-0/+77
Enable ethtool reset support. Ethtool reset flags are mapped to the E810 reset type: PF reset: $ ethtool --reset <ethX> irq dma filter offload CORE reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared ram-shared GLOBAL reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared mac-shared phy-shared ram-shared Calling the same set of flags as in PF reset case on port representor triggers VF reset. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: check if SF is ready in ethtool opsMichal Swiatkowski1-4/+3
Now there is another type of port representor. Correct checking if parent device is ready to reflect also new PR type. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ice: Remove setting of RX software timestampGal Pressman1-2/+0
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-12ethtool: rss: don't report key if device doesn't support itJakub Kicinski1-0/+1
marvell/otx2 and mvpp2 do not support setting different keys for different RSS contexts. Contexts have separate indirection tables but key is shared with all other contexts. This is likely fine, indirection table is the most important piece. Don't report the key-related parameters from such drivers. This prevents driver-errors, e.g. otx2 always writes the main key, even when user asks to change per-context key. The second reason is that without this change tracking the keys by the core gets complicated. Even if the driver correctly reject setting key with rss_context != 0, change of the main key would have to be reflected in the XArray for all additional contexts. Since the additional contexts don't have their own keys not including the attributes (in Netlink speak) seems intuitive. ethtool CLI seems to deal with it just fine. Having to set the flag in majority of the drivers is a bit tedious but not reporting the key is a safer default. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-07ice: Fix incorrect assigns of FEC countsMateusz Polchlopek1-4/+4
Commit ac21add2540e ("ice: Implement driver functionality to dump fec statistics") introduces obtaining FEC correctable and uncorrectable stats per netdev in ICE driver. Unfortunately the assignment of values to fec_stats structure has been done incorrectly. This commit fixes the assignments. Fixes: ac21add2540e ("ice: Implement driver functionality to dump fec statistics") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-15Merge branch 'net-make-timestamping-selectable'Jakub Kicinski1-1/+1
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent1-1/+1
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11ice: Implement driver functionality to dump serdes equalizer valuesAnil Samal1-2/+136
To debug link issues in the field, serdes Tx/Rx equalizer values help to determine the health of serdes lane. Extend 'ethtool -d' option to dump serdes Tx/Rx equalizer. The following list of equalizer param is supported a. rx_equalization_pre2 b. rx_equalization_pre1 c. rx_equalization_post1 d. rx_equalization_bflf e. rx_equalization_bfhf f. rx_equalization_drate g. tx_equalization_pre1 h. tx_equalization_pre3 i. tx_equalization_atten j. tx_equalization_post1 k. tx_equalization_pre2 Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anil Samal <anil.samal@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240709202951.2103115-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11ice: Implement driver functionality to dump fec statisticsAnil Samal1-0/+304
To debug link issues in the field, it is paramount to dump fec corrected/uncorrected block counts from firmware. Firmware requires PCS quad number and PCS port number to read FEC statistics. Current driver implementation does not maintain above physical properties of a port. Add new driver API to derive physical properties of an input port.These properties include PCS quad number, PCS port number, serdes lane count, primary serdes lane number. Extend ethtool option '--show-fec' to support fec statistics. The IEEE standard mandates two sets of counters: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks Standard defines above statistics per lane but current implementation supports total FEC statistics per port i.e. sum of all lane per port. Find sample output below FEC parameters for ens21f0np0: Supported/Configured FEC encodings: Auto RS BaseR Active FEC encoding: RS Statistics: corrected_blocks: 0 uncorrectable_blocks: 0 Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anil Samal <anil.samal@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240709202951.2103115-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-23ice: Interpret .set_channels() input differentlyLarysa Zaremba1-17/+2
A bug occurs because a safety check guarding AF_XDP-related queues in ethnl_set_channels(), does not trigger. This happens, because kernel and ice driver interpret the ethtool command differently. How the bug occurs: 1. ethtool -l <IFNAME> -> combined: 40 2. Attach AF_XDP to queue 30 3. ethtool -L <IFNAME> rx 15 tx 15 combined number is not specified, so command becomes {rx_count = 15, tx_count = 15, combined_count = 40}. 4. ethnl_set_channels checks, if there are any AF_XDP of queues from the new (combined_count + rx_count) to the old one, so from 55 to 40, check does not trigger. 5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the queue that AF_XDP is attached to. Interpret the command in a way that is more consistent with ethtool manual [0] (--show-channels and --set-channels). Considering that in the ice driver only the difference between RX and TX queues forms dedicated channels, change the correct way to set number of channels to: ethtool -L <IFNAME> combined 10 /* For symmetric queues */ ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */ [0] https://man7.org/linux/man-pages/man8/ethtool.8.html Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-03ice: Fix freeing uninitialized pointersDan Carpenter1-1/+1
Automatically cleaned up pointers need to be initialized before exiting their scope. In this case, they need to be initialized to NULL before any return statement. Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-06ice: Implement RSS settings for GTP using ethtoolTakeru Hayasaka1-0/+82
Following the addition of new GTP RSS hash options to ethtool.h, this patch implements the corresponding RSS settings for GTP packets in the Intel ice driver. It enables users to configure RSS for GTP-U and GTP-C traffic over IPv4 and IPv6, utilizing the newly defined hash options. The implementation covers the handling of gtpu(4|6), gtpc(4|6), gtpc(4|6)t, gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d traffic, providing enhanced load distribution for GTP traffic across multiple processing units. Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-04ice: avoid unnecessary devm_ usageMaciej Fijalkowski1-7/+3
1. pcaps are free'd right after AQ routines are done, no need for devm_'s 2. a test frame for loopback test in ethtool -t is destroyed at the end of the test so we don't need devm_ here either. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-02ice: Add a new counter for Rx EIPE errorsAniruddha Paul1-0/+1
HW incorrectly reports EIPE errors on encapsulated packets with L2 padding inside inner packet. HW shows outer UDP/IPV4 packet checksum errors as part of the EIPE flags of the Rx descriptor. These are reported only if checksum offload is enabled and L3/L4 parsed flag is valid in Rx descriptor. When that error is reported by HW, we don't act on it instead of incrementing main Rx errors statistic as it would normally happen. Add a new statistic to count these errors since we still want to print them. Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-30ice: introduce PTP state machineJacob Keller1-1/+1
Add PTP state machine so that the driver can correctly identify PTP state around resets. When the driver got information about ungraceful reset, PTP was not prepared for reset and it returned error. When this situation occurs, prepare PTP before rebuilding its structures. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-02ice: remove rx_len_errors statisticJan Sokolowski1-1/+0
It was found that this statistic is incorrectly reported by HW and thus, useless. As RX length error statistics are shown to the end user when requested, the values reported are misleading. Thus, that value is no longer reported and doesn't count anymore when adding all rx errors. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-2/+2
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-14ice: enable symmetric-xor RSS for Toeplitz hash functionJeff Guo1-17/+22
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-8-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14ice: refactor RSS configurationQi Zhang1-1/+5
Refactor the driver to use a communication data structure for RSS config. To do so we introduce the new ice_rss_hash_cfg struct, and then pass it as an argument to several functions. Also introduce enum ice_rss_cfg_hdr_type to specify a more granular and flexible RSS configuration: ICE_RSS_OUTER_HEADERS - take outer layer as RSS input set ICE_RSS_INNER_HEADERS - take inner layer as RSS input set ICE_RSS_INNER_HEADERS_W_OUTER_IPV4 - take inner layer as RSS input set for packet with outer IPV4 ICE_RSS_INNER_HEADERS_W_OUTER_IPV6 - take inner layer as RSS input set for packet with outer IPV6 ICE_RSS_ANY_HEADERS - try with outer first then inner (same as the behaviour without this change) Finally, move the virtchnl_rss_algorithm enum to be with the other RSS related structures in the virtchnl.h file. There should be no functional change due to this patch. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-6-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14net: ethtool: get rid of get/set_rxfh_context functionsAhmed Zaki1-16/+13
Add the RSS context parameters to struct ethtool_rxfh_param and use the get/set_rxfh to handle the RSS contexts as well. This is part 2/2 of the fix suggested in [1]: - Add a rss_context member to the argument struct and a capability like cap_link_lanes_supported to indicate whether driver supports rss contexts, then you can remove *et_rxfh_context functions, and instead call *et_rxfh() with a non-zero rss_context. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Tony Nguyen <anthony.l.nguyen@intel.com> CC: Marcin Wojtas <mw@semihalf.com> CC: Russell King <linux@armlinux.org.uk> CC: Sunil Goutham <sgoutham@marvell.com> CC: Geetha sowjanya <gakula@marvell.com> CC: Subbaraya Sundeep <sbhatta@marvell.com> CC: hariprasad <hkelam@marvell.com> CC: Saeed Mahameed <saeedm@nvidia.com> CC: Leon Romanovsky <leon@kernel.org> CC: Edward Cree <ecree.xilinx@gmail.com> CC: Martin Habets <habetsm.xilinx@gmail.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-3-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki1-23/+21
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13ice: fix theoretical out-of-bounds access in ethtool link modesMichal Schmidt1-2/+2
To map phy types reported by the hardware to ethtool link mode bits, ice uses two lookup tables (phy_type_low_lkup, phy_type_high_lkup). The "low" table has 64 elements to cover every possible bit the hardware may report, but the "high" table has only 13. If the hardware reports a higher bit in phy_types_high, the driver would access memory beyond the lookup table's end. Instead of iterating through all 64 bits of phy_types_{low,high}, use the sizes of the respective lookup tables. Fixes: 9136e1f1e5c3 ("ice: refactor PHY type to ethtool link mode") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com1-6/+3
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27ice: Add 200G speed/phy type useAlice Michael1-2/+24
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19intel: fix format warningsJesse Brandeburg1-3/+4
Get ahead of the game and fix all the -Wformat=2 noted warnings in the intel drivers directory. There are one set of i40e and iavf warnings I couldn't figure out how to fix because the driver is already using vsnprintf without an explicit "const char *" format string. Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after this series but clang-15 is a little worried about the vsnprintf lines. summary of warnings: drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18ice: Refactor finding advertised link speedPawel Chmielewski1-65/+128
Refactor ice_get_link_ksettings to using forced speed to link modes mapping. Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20ice: PTP: add clock domain number to auxiliary interfaceMichal Michalik1-1/+1
The PHC clock id used to be moved between PFs using FW admin queue shared parameters - move the implementation to auxiliary bus. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14ice: prevent NULL pointer deref during reloadMichal Swiatkowski1-2/+11
Calling ethtool during reload can lead to call trace, because VSI isn't configured for some time, but netdev is alive. To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors to 0 after freeing and add a check for ::tx/rx_rings in ring related ethtool ops. Add proper unroll of filters in ice_start_eth(). Reproduction: $watch -n 0.1 -d 'ethtool -g enp24s0f0np0' $devlink dev reload pci/0000:18:00.0 action driver_reinit Call trace before fix: [66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000 [66303.926259] #PF: supervisor read access in kernel mode [66303.926286] #PF: error_code(0x0000) - not-present page [66303.926311] PGD 0 P4D 0 [66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI [66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1 [66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice] [66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48 [66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246 [66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48 [66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000 [66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000 [66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000 [66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50 [66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000 [66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0 [66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [66303.927060] PKRU: 55555554 [66303.927075] Call Trace: [66303.927094] <TASK> [66303.927111] ? __die+0x23/0x70 [66303.927140] ? page_fault_oops+0x171/0x4e0 [66303.927176] ? exc_page_fault+0x7f/0x180 [66303.927209] ? asm_exc_page_fault+0x26/0x30 [66303.927244] ? ice_get_ringparam+0x22/0x50 [ice] [66303.927433] rings_prepare_data+0x62/0x80 [66303.927469] ethnl_default_doit+0xe2/0x350 [66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140 [66303.927538] genl_rcv_msg+0x1b1/0x2c0 [66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10 [66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10 [66303.927615] netlink_rcv_skb+0x58/0x110 [66303.927644] genl_rcv+0x28/0x40 [66303.927665] netlink_unicast+0x19e/0x290 [66303.927691] netlink_sendmsg+0x254/0x4d0 [66303.927717] sock_sendmsg+0x93/0xa0 [66303.927743] __sys_sendto+0x126/0x170 [66303.927780] __x64_sys_sendto+0x24/0x30 [66303.928593] do_syscall_64+0x5d/0x90 [66303.929370] ? __count_memcg_events+0x60/0xa0 [66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30 [66303.930920] ? handle_mm_fault+0x9e/0x350 [66303.931688] ? do_user_addr_fault+0x258/0x740 [66303.932452] ? exc_page_fault+0x7f/0x180 [66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-17ice: refactor PHY type to ethtool link modePaul Greenwalt1-274/+35
Refactor ice_phy_type_to_ethtool to use phy_type_[low|high]_lkup table to map PHY type to AQ link speed and ethtool link mode. This removes complexity and simplifies future changes. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: add individual interrupt allocationPiotr Raczynski1-1/+1
Currently interrupt allocations, depending on a feature are distributed in batches. Also, after allocation there is a series of operations that distributes per irq settings through that batch of interrupts. Although driver does not yet support dynamic interrupt allocation, keep allocated interrupts in a pool and add allocation abstraction logic to make code more flexible. Keep per interrupt information in the ice_q_vector structure, which yields ice_vsi::base_vector redundant. Also, as a result there are a few functions that can be removed. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-03ice: copy last block omitted in ice_get_module_eeprom()Petr Oros1-2/+4
ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ .... Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-11Daniel Borkmann says:Jakub Kicinski1-3/+1
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03ice: cleanup in VSI config/deconfig codeMichal Swiatkowski1-1/+1
Do few small cleanups: 1) Rename the function to reflect that it doesn't configure all things related to VSI. ice_vsi_cfg_lan() better fits to what function is doing. ice_vsi_cfg() can be use to name function that will configure whole VSI. 2) Remove unused ethtype field from VSI. There is no need to set ethtype here, because it is never used. 3) Remove unnecessary check for ICE_VSI_CHNL. There is check for ICE_VSI_CHNL in ice_vsi_get_qs, so there is no need to check it before calling the function. 4) Simplify ice_vsi_alloc() call. There is no need to check the type of VSI before calling ice_vsi_alloc(). For ICE_VSI_CHNL vf is always NULL (ice_vsi_setup() is called with vf=NULL). For ICE_VSI_VF or ICE_VSI_CTRL ch is always NULL and for other VSI types ch and vf are always NULL. 5) Remove unnecessary call to ice_vsi_dis_irq(). ice_vsi_dis_irq() will be called in ice_vsi_close() flow (ice_vsi_close() -> ice_vsi_down() -> ice_vsi_dis_irq()). Remove unnecessary call. 6) Don't remove specific filters in release. All hw filters are removed in ice_fltr_remove_alli(), which is always called in VSI release flow. There is no need to remove only ethertype filters before calling ice_fltr_remove_all(). 7) Rename ice_vsi_clear() to ice_vsi_free(). As ice_vsi_clear() only free memory allocated in ice_vsi_alloc() rename it to ice_vsi_free() which better shows what function is doing. 8) Free coalesce param in rebuild. There is potential memory leak if configuration of VSI lan fails. Free coalesce to avoid it. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+24
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-11-01 20:33:57 +0300