summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf
AgeCommit message (Collapse)AuthorFilesLines
2014-06-25i40e/i40evf: Bump i40e to 0.4.17 and i40evf to 0.9.36Catherine Sullivan1-1/+1
Bump versions. Change-ID: I47fc3433240800cd823ff512f3015822277b0d20 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-25i40e/i40evf: remove reserved typeJesse Brandeburg2-2/+0
One of the PCTYPES that was moved to a reserved value wasn't removed from the code. Change-ID: I31fafe6d79c5f5128179979af5eaafa8c0cd62fe Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Bump i40e to 0.4.13 and i40evf to 0.9.35Catherine Sullivan1-1/+1
Bump versions. Change-ID: Ifaed5404b9e953a11f4c88953ffe4bc8937705f1 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: modify debug prints to avoid seg faultsKamil Krawczyk1-4/+11
Some AQ debug prints needs be moved around or do additional checks so they will not cause our tool applications to cause segmentation faults. The tools run in user space and we need to correctly reference kernel space memory. Change-ID: Ia2ac4076f576b805f350453fd50ad69c2a91ab9a Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Update RSS configurationCarolyn Wyborny1-0/+3
This patch changes the RSS configuration to set table size and write to hardware to confirm RSS table size being used. Change-ID: I455a4c09c9dd479f5791ee1f09fdc83ff9908df5 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40evf: fix off-by-oneMitch Williams1-2/+2
The loop in i40evf_get_rxfh_indir was only reading fifteen registers, not all sixteen. Change the matching loop in i40evf_set_rxfh_indir at the same time to make the code more consistent. Change-ID: I6c182287698e742d1f6ca1a4bcc43cc08df6e1de Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Reset Head and Tail on AQ initializationMichal Kosiarz1-0/+21
Reset head and tail on admin queue initialization where H/T are not reset by HW. Change-ID: I6db8a2dd3f05ce66410a92cce016191add04760e Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: i40e_register.h updateAnjali Singhai Jain2-3158/+1856
This updates the register file for new hardware. The format of the file has changed requiring drivers to declare I40E_MASK. I40E_MASK is to be used with 32 bit registers. This patch also updates the drivers to accommodate the register changes. Change-ID: If9bc8d736391024cbf99054efe50f9acc12ee4f1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Bump i40e to version 0.4.10 and i40evf to 0.9.34Catherine Sullivan1-1/+1
Bump versions. Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Add Flow director stats to PF statsAnjali Singhai Jain1-0/+3
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: remove FTYPEJesse Brandeburg1-1/+0
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: check admin queue error bitsMitch Williams1-0/+36
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: User ether_addr_copy instead of memcpyGreg Rose2-9/+8
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: don't go further downMitch Williams1-2/+4
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: AdminQ API update for new FWShannon Nelson1-16/+80
Add set_pf_context, replace set_phy_reset with set_phy_debug, add nvm_config_read/write, remove nvm_read/write_reg_se and add some PHY types. With these changes we bump the API version to 1.2. Change-ID: I4dc3aec175c2316f66fc9b726b3f7d594699d84e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: set headwb Tx context flags and use themAshish Shah1-0/+3
Set appropriate fields in Tx queue configuration virtchnl message to pf to enable headwb and setup headwb addr. Then use that info from the VF to set headwb and headwb_addr instead of always enabling them. Change-ID: I7d393d1b2b07f0f3355b3a4f7c2d3c6ee3b0d622 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-09i40e/i40evf: bump version to 0.4.7 for i40e and 0.9.31 for i40evfShannon Nelson1-1/+1
Bumpity and Fred Worm say it's time to change the numbers again. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Change-ID: I658731d022ea23cedede4be2bfecd8b4cc68d270 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-09i40e/i40evf: add PPRS bit to error bits and fix bug in Rx checksumJesse Brandeburg2-20/+57
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-09i40evf: Fix function headerCatherine Sullivan1-1/+1
Fix function header comment to have the correct function name. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Bump build versionCatherine Sullivan1-1/+1
Bump i40e to 0.4.5 and i40evf to 0.9.29. Change-ID: I9faca5544446518c5425612e733499cf16ef20a1 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: remove deprecated device IDsJesse Brandeburg2-5/+1
Remove two device IDs 1582 and 1573, because they will not be shipped. Change-ID: Ica2e550b5b21a69e3f353eba2fe5e1c532a548c4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix poll weightJesse Brandeburg1-1/+1
Fix a coding error where during the registration for NAPI the driver requested 256 budget. The max recommended value for this is NAPI_POLL_WEIGHT or 64. Change-ID: I03ea1e2934a84ff1b5d572988b18315d6d91c5c6 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix TSO accountingJesse Brandeburg2-8/+3
The TSO logic in the transmit path had some assumptions that have been broken now that the kernel can send as much as 32kB in a single skb->frag[.] entry, even on a system with 4kB pages. This fixes the assumptions and allows the kernel to operate as efficiently as possible with both SENDFILE and SEND. In addition, the hardware limit of data contained in a descriptor is changed to the next power of two below where it currently is in order to align to a power of two value, preventing a single byte of data in a descriptor. Change-ID: I6af1f0b87c1458e10644dbd47541591075a52651 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: remove chatty reset messagesMitch Williams1-9/+4
Both the PF side and the VF side of the VF reset process are too noisy. We already warn the user that a reset is happening, and that is sufficient. Because some of these message are inside if statements, we have to rejigger the brackets at the same time to keep our coding style consistent. Change-ID: Id175562fb0ec7c396d9de156b4890e136f52d5f4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: use correct format for printing MAC addressesMitch Williams1-2/+2
The correct format is %pM, not %pMAC. Change-ID: Idb335723a966fe56db3a72b9c07c08ca66f9db3c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: clean up log message formattingMitch Williams2-14/+14
Clean up inconsistent log messages, mostly related to punctuation. Based on the dogma that "kernel messages are not sentences", remove all trailing periods. Reword a few of the messages to make them less sentence-like. Change-ID: Ibd849aa7623a77549b0709988c66ab05d1311472 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: remove bogus commentMitch Williams1-3/+0
This comment is just plain false. VF drivers require MSI-X or they won't get interrupts at all. Change-ID: Iaea5e30b6926948aa834a3c506d9a9223d9e3e29 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: remove unnecessary log messagesMitch Williams2-38/+16
We don't need to print log messages when we encounter an out-of-memory condition, as the allocator will do this for us. Also, remove a Tx hang message that duplicates the one emitted by the netdev layer, and a duplicate message in the watchdog. Change-ID: If2056e6135fe248f66ea939778f9895660f4d189 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Clean up a few thingsAkeem G Abodunrin1-4/+0
1. There is no ixgbe_watchdog_task function in the driver, so change the comment to the correct function name, i40e_watchdog_subtask. 2. Remove num_msix_entries from interrupt set_up routine because it is never used. 3. Remove some TBD comments that are not needed. Change-ID: I37697a04007074b797f85fd83d626672e4df1ad1 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Fix code to accommodate i40e_register.h changesAnjali Singhai Jain1-6/+1
Remove use of registers no longer supported. Change-ID: I9d27399091cea78a926489d94f958edd762f5a20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix rx descriptor statusJesse Brandeburg1-4/+6
As reported by Eric Dumazet, the driver is not masking the right bits in the receive descriptor before it starts checking them. This patch extends the mask to allow for the right bits to be checked, and fixes the issue permanently via a define. CC: Eric Dumazet <eric.dumazet@gmail.com> Change-ID: I3274f7619057a950f468143e6d7e11b129f54655 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: Bump build versionCatherine Sullivan1-1/+1
Bump i40e to 0.4.3 and i40evf to 0.9.27. Change-ID: I4141e9f8615bdcfa3b1b5ecbc2ac62603a03b7ad Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: add Tx pre queue disable functionMatt Jared1-0/+8
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: check AQ register for valid dataKamil Krawczyk1-4/+30
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40evf: make messages less direMitch Williams1-2/+2
Depending on the timing of what the PF driver is doing, it make take a few tries before the VF driver is able to communicate with the PF driver on init or reset recovery. In order to prevent confusion, make the most common messages less scary by lowering them to a less terrifying log level and indicate that the driver will retry. Change-ID: I1ec22aa59a68f4469aabe14775a1bfc1ab4b7f2f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove rx_errors and rx_missedShannon Nelson3-6/+1
The rx_errors (GLV_REPC) and rx_missed (GLV_RMPC) were removed from the chip design. Change-ID: Ifdeb69c90feac64ec95c36d3d32c75e3a06de3b7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: VEB structure added, GTIME macro updateKamil Krawczyk1-2/+12
Structure for VEB context added. Update macro for transition from ms to GTIME (us) time units. Change-ID: Ib3a19587b4cf355348655df8f60c6f37bb1497a3 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40evf: fix crash when changing ring sizesMitch Williams3-13/+15
i40evf_set_ringparam was broken in several ways. First, it only changed the size of the first ring, and second, changing the ring size would often result in a panic because it would change the count before deallocating resources, causing the driver to either free nonexistent buffers, or leak leftover buffers. Fix this by storing the descriptor count in the adapter structure, and updating the count for each ring each time we allocate them. This ensures that we always free the right size ring, and always end up with the requested count when the device is (re)opened. Change-ID: I298396cd3d452ba8509d9f2d33a93f25868a9a55 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40evf: set descriptor multiple to 32Mitch Williams1-1/+1
Hardware requires descriptors to be allocated in groups of 32. Change-ID: I752ccc96769d1bd8d3018c004b8aeff464045bf2 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove unused RX_LRO defineJesse Brandeburg1-7/+0
Remove unused defines and macros for RX_LRO. Change-ID: I8ca6715edfa62b56837417a1c4ff68c2345dab6e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-03Merge branch 'ethtool-rssh-fixes' of ↵David S. Miller1-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/net-next Ben Hutchings says: ==================== Pull request: Fixes for new ethtool RSS commands This addresses several problems I previously identified with the new ETHTOOL_{G,S}RSSH commands: 1. Missing validation of reserved parameters 2. Vague documentation 3. Use of unnamed magic number 4. No consolidation with existing driver operations I don't currently have access to suitable network hardware, but have tested these changes with a dummy driver that can support various combinations of operations and sizes, together with (a) Debian's ethtool 3.13 (b) ethtool 3.14 with the submitted patch to use ETHTOOL_{G,S}RSSH and minor adjustment for fixes 1 and 3. v2: Update RSS operations in vmxnet3 too ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03ethtool: Replace ethtool_ops::{get,set}_rxfh_indir() with {get,set}_rxfh()Ben Hutchings1-6/+9
ETHTOOL_{G,S}RXFHINDIR and ETHTOOL_{G,S}RSSH should work for drivers regardless of whether they expose the hash key, unless you try to set a hash key for a driver that doesn't expose it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: don't use RESETTING state during reinitMitch Williams1-2/+0
The RESETTING state means that a Catastrophic Hardware Bad Thing is happening and the driver need to tiptoe around and not use the admin queue or registers or anything like that. On the other hand, a reinit is no big deal and we can use the admin queue, and we should. So don't set the state to RESETTING here. This fixes a Tx hang and FW crash that happens after setting the MTU on a VF. Change-ID: I3e6191edbd6a93958a1f1bd1d41a5c2d17474d41 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Change type to u32 to avoid sparse errorGreg Rose1-2/+2
tx_lpi_status and rx_lpi_status are declared as bool but then used in sizeof operations in the CORE driver code. Make them u32 to make sparse be quiet. Change-ID: Iad6daeb1c7149e61ece242acd18c64b320c246a3 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: remove storm controlJesse Brandeburg2-5/+1
The storm control features are not part of the hardware and mistakenly were left in the code. Remove them as they are not needed any more. Change-ID: I6e9277c8da2c52e69348a657bae25271449c2099 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Remove reserved PCTYPE definesKevin Scott2-12/+3
Patch to remove PCTYPE definitions which are now reserved. Change-ID: I66c1c16a45a16f4894b2983101ab2a48ce03f1f4 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Update check for AQ alivenessKevin Scott1-1/+5
Update the i40e_check_asq_alive check to ensure that the len register offset is non-zero, indicating that SW has initialized the AQ. Change-ID: I9c2e804788b4775bef9c7e80954ab004e6bdb306 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27i40evf: Use is_multicast_ether_addr helperTobias Klauser1-1/+1
Use the is_multicast_ether_addr helper function from linux/etherdevice.h instead of open coding the multicast address check. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23i40e,igb,ixgbe: remove usless return statementsStephen Hemminger1-4/+0
Remove cases where useless bare return is left at end of function. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-20/+11
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 11:25:39 +0300