summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)AuthorFilesLines
2022-10-26i40e: Fix flow-type by setting GL_HASH_INSET registersSlawomir Laba1-33/+38
Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26i40e: Fix VF hang when reset is triggered on another VFSylwester Dziedziuch2-11/+33
When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26i40e: Fix ethtool rx-flow-hash setting for X722Slawomir Laba2-8/+27
When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-14i40e: Fix DMA mappings leakJan Sokolowski6-28/+74
During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-6/+46
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20i40e: Fix set max_tx_rate when it is lower than 1 MbpsMichal Jaron1-6/+26
While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-20i40e: Fix VF set max MTU sizeMichal Jaron1-0/+20
Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni3-2/+9
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06i40e: add description and modify interrupts configuration procedureJaroslaw Gawin2-21/+27
Add description for values written into registers QINT_XXXX and small cosmetic changes for MSI/LEGACY interrupts configuration in the same way as for MSI-X. Descriptions confirm the code is written correctly and make the code clear. Small cosmetic changes for MSI/LEGACY interrupts make code clear in the same manner as for MSI-X interrupts. Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06i40e: Add basic support for I710 devicesStanislaw Grzeszczak3-1/+7
Intel introduces a new line of 1G ethernet adapters with Device ID 0x0DD2 Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix kernel crash during module removalIvan Vecera1-1/+4
The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix ADQ rate limiting for PFPrzemyslaw Patynowski2-1/+5
Fix HW rate limiting for ADQ. Fallback to kernel queue selection for ADQ, as it is network stack that decides which queue to use for transmit with ADQ configured. Reset PF after creation of VMDq2 VSIs required for ADQ, as to reprogram TX queue contexts in i40e_configure_tx_ring. Without this patch PF would limit TX rate only according to TC0. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-01net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang3-12/+12
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24i40e: Fix incorrect address type for IPv6 flow rulesSylwester Dziedziuch1-1/+1
It was not possible to create 1-tuple flow director rule for IPv6 flow type. It was caused by incorrectly checking for source IP address when validating user provided destination IP address. Fix this by changing ip6src to correct ip6dst address in destination IP address validation for IPv6 flow type. Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady1-1/+3
When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16i40e: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski1-3/+5
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \ enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Without this patch, TX descriptor was using wrong data, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-01Merge branch '1GbE' of ↵Jakub Kicinski1-21/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2022-07-28 Jacob Keller says: Convert all of the Intel drivers with PTP support to the newer .adjfine implementation which uses scaled parts per million. This improves the precision of the frequency adjustments by taking advantage of the full scaled parts per million input coming from user space. In addition, all implementations are converted to using the mul_u64_u64_div_u64 function which better handles the intermediate value. This function supports architecture specific instructions where possible to avoid loss of precision if the normal 64-bit multiplication would overflow. Of note, the i40e implementation is now able to avoid loss of precision on slower link speeds by taking advantage of this to multiply by the link speed factor first. This results in a significantly more precise adjustment by allowing the calculation to impact the lower bits. This also gets us a step closer to being able to remove the .adjfreq entirely by removing its use from many drivers. I plan to follow this up with a series to update the drivers from other vendors and drop the .adjfreq implementation entirely. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igb: convert .adjfreq to .adjfine ixgbe: convert .adjfreq to .adjfine i40e: convert .adjfreq to .adjfine i40e: use mul_u64_u64_div_u64 for PTP frequency calculation e1000e: convert .adjfreq to .adjfine e1000e: remove unnecessary range check in e1000e_phc_adjfreq ice: implement adjfine with mul_u64_u64_div_u64 ==================== Link: https://lore.kernel.org/r/20220728181836.3387862-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28i40e: convert .adjfreq to .adjfineJacob Keller1-10/+12
The i40e driver currently implements the .adjfreq handler for frequency adjustments. This takes the adjustment parameter in parts per billion. The PTP core supports .adjfine which provides an adjustment in scaled parts per million. This has a higher resolution and can result in more precise adjustments for small corrections. Convert the existing .adjfreq implementation to the newer .adjfine implementation. This is trivial since it just requires changing the divisor from 1000000000ULL to (1000000ULL << 16) in the mul_u64_u64_div_u64 call. This improves the precision of the adjustments and gets us one driver closer to removing the old .adjfreq support from the kernel. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28i40e: use mul_u64_u64_div_u64 for PTP frequency calculationJacob Keller1-13/+4
The i40e device has a different clock rate depending on the current link speed. This requires using a different increment rate for the PTP clock registers. For slower link speeds, the base increment value is larger. Directly multiplying the larger increment value by the parts per billion adjustment might overflow. To avoid this, the i40e implementation defaults to using the lower increment value and then multiplying the adjustment afterwards. This causes a loss of precision for lower link speeds. We can fix this by using mul_u64_u64_div_u64 instead of performing the multiplications using standard C operations. On X86, this will use special instructions that perform the multiplication and division with 128bit intermediate values. For other architectures, the fallback implementation will limit the loss of precision for large values. Small adjustments don't overflow anyways and won't lose precision at all. This allows first multiplying the base increment value and then performing the adjustment calculation, since we no longer fear overflowing. It also makes it easier to convert to the even more precise .adjfine implementation in a following change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski1-0/+4
Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22i40e: Refactor tc mqprio checksPrzemyslaw Patynowski3-11/+25
Refactor bitwise checks for whether TC MQPRIO is enabled into one single method for improved readability. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+5
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19i40e: Fix erroneous adapter reinitialization during recovery processDawid Lukwinski1-8/+5
Fix an issue when driver incorrectly detects state of recovery process and erroneously reinitializes interrupts, which results in a kernel error and call trace message. The issue was caused by a combination of two factors: 1. Assuming the EMP reset issued after completing firmware recovery means the whole recovery process is complete. 2. Erroneous reinitialization of interrupt vector after detecting the above mentioned EMP reset. Fixes (1) by changing how recovery state change is detected and (2) by adjusting the conditional expression to ensure using proper interrupt reinitialization method, depending on the situation. Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-0/+107
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30i40e: Fix VF's MAC Address change on VMNorbert Zulinski1-0/+4
Clear VF MAC from parent PF and remove VF filter from VSI when both conditions are true: -VIRTCHNL_VF_OFFLOAD_USO is not used -VM MAC was not set from PF level It affects older version of IAVF and it allow them to change MAC Address on VM, newer IAVF won't change their behaviour. Previously it wasn't possible to change VF's MAC Address on VM because there is flag on IAVF driver that won't allow to change MAC Address if this address is given from PF driver. Fixes: 155f0ac2c96b ("iavf: allow permanent MAC address to change") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30i40e: Fix dropped jumbo frames statisticsLukasz Cieplicki4-0/+103
Dropped packets caused by too large frames were not included in dropped RX packets statistics. Issue was caused by not reading the GL_RXERR1 register. That register stores count of packet which was have been dropped due to too large size. Fix it by reading GL_RXERR1 register for each interface. Repro steps: Send a packet larger than the set MTU to SUT Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0" Fixes: 41a9e55c89be ("i40e: add missing VSI statistics") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel/i40e:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'a'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30intel: remove unused macrosJesse Brandeburg3-4/+0
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-25i40e: read the XDP program once per NAPICiara Loftus2-12/+16
Similar to how it's done in the ice driver since 'eb087cd82864 ("ice: propagate xdp_ring onto rx_ring")', read the XDP program once per NAPI instead of once per descriptor cleaned. I measured an improvement in throughput of 2% for the AF_XDP xdpsock l2fwd benchmark for zero copy mode and 1% for copy mode. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Link: https://lore.kernel.org/r/20220623100852.7867-1-ciara.loftus@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21intel/i40e: delete if NULL check before dev_kfree_skbBernard Zhao1-4/+2
dev_kfree_skb check if the input parameter NULL and do the right thing, there is no need to check again. This change is to cleanup the code a bit. Signed-off-by: Bernard Zhao <zhaojunkui2008@126.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21i40e: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-2/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21i40e: Add support for ethtool -s <interface> speed <speed in Mb>Mateusz Palczewski1-0/+90
Add ability to change speed through ethtool -s <interface> speed <speed in Mb> Driver advertises all link modes that support requested speed. Autoneg must be set off e.g.: ethtool -s <interface> autoneg off speed <speed in Mb>. Add helper function that translate speed in Mb to enum i40e_aq_link_speed and compare it to supported speeds from given ethtool_link_ksettings. Add in i40e_set_link_ksettings hold for requested speed and set copy_ks.base.speed to safe_ks.base.speed to be sure that user is not changing unsupported setting. In i40e_speed_to_link_speed compare requested speed with supported speeds. Set speed to requested speed. Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-9/+23
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-15i40e: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi1-25/+62
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Tested-by: Sarkar Tirthendu <tirthendu.sarkar@intel.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-09i40e: Fix call trace in setup_tx_descriptorsAleksandr Loktionov1-8/+17
After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09i40e: Fix calculating the number of queue pairsGrzegorz Szczurek1-1/+1
If ADQ is enabled for a VF, then actual number of queue pair is a number of currently available traffic classes for this VF. Without this change the configuration of the Rx/Tx queues fails with error. Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09i40e: Fix adding ADQ filter to TC0Grzegorz Szczurek1-0/+5
Procedure of configure tc flower filters erroneously allows to create filters on TC0 where unfiltered packets are also directed by default. Issue was caused by insufficient checks of hw_tc parameter specifying the hardware traffic class to pass matching packets to. Fix checking hw_tc parameter which blocks creation of filters on TC0. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07i40e: Add VF VLAN pruningMateusz Palczewski4-6/+147
VFs by default are able to see all tagged traffic regardless of trust and VLAN filters configured. Add new private flag vf-vlan-pruning that allows changing of default VF behavior for tagged traffic. When the flag is turned on untrusted VF will only be able to receive untagged traffic or traffic with VLAN tags it has created interfaces for The flag is off by default and can only be changed if there are no VFs spawned on the PF. This flag will only be effective when no PVID is set on VF and VF is not trusted. Add new function that computes the correct VLAN ID for VF VLAN filters based on trust, PVID, vf-vlan-prune-disable flag and current VLAN ID. Testing Hints: Test 1: vf-vlan-pruning == off ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Use scapy to send any VLAN tagged traffic and make sure the VF receives all VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). Test 2: vf-vlan-pruning == on ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning on 2. Use scapy to send any VLAN tagged traffic and make sure the VF does not receive any VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). 3. Add a VLAN filter on the VF netdev > ip link add link eth0v0 name vlan10 type vlan id 10 4. Bring the VLAN netdev up > ip link set vlan10 up 4. Use scapy to send traffic with VLAN 10, VLAN 11 (anything not VLAN 10), and untagged traffic. Make sure the VF only receives VLAN 10 and untagged traffic when the link partner is sending. Test 3: vf-vlan-pruning == off && VF is in a port VLAN ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Create a VF > echo 1 > sriov_numvfs 3. Put the VF in a port VLAN > ip link set eth0 vf 0 vlan 10 4. Use scapy to send traffic with VLAN 10 and VLAN 11 (anything not VLAN 10) and make sure the VF only receives untagged traffic when the link partner is sending VLAN 10 tagged traffic as the VLAN tag is expected to be stripped by HW for port VLANs and not visible to the VF. Test 4: Change vf-vlan-pruning while VFs are created ============================== echo 0 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning off echo 1 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning on (expect failure) Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-13/+14
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12i40e: i40e_main: fix a missing check on list iteratorXiaomeng Tong1-13/+14
The bug is here: ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err); The list iterator 'ch' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix this bug, use a new variable 'iter' as the list iterator, while use the origin variable 'ch' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 1d8d80b4e4ff6 ("i40e: Add macvlan support on i40e") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-14/+26
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-27 We've added 85 non-merge commits during the last 18 day(s) which contain a total of 163 files changed, 4499 insertions(+), 1521 deletions(-). The main changes are: 1) Teach libbpf to enhance BPF verifier log with human-readable and relevant information about failed CO-RE relocations, from Andrii Nakryiko. 2) Add typed pointer support in BPF maps and enable it for unreferenced pointers (via probe read) and referenced ones that can be passed to in-kernel helpers, from Kumar Kartikeya Dwivedi. 3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel. 4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced the effective prog array before the rcu_read_lock, from Stanislav Fomichev. 5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic for USDT arguments under riscv{32,64}, from Pu Lehui. 6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire. 7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage so it can be shipped under Alpine which is musl-based, from Dominique Martinet. 8) Clean up {sk,task,inode} local storage trace RCU handling as they do not need to use call_rcu_tasks_trace() barrier, from KP Singh. 9) Improve libbpf API documentation and fix error return handling of various API functions, from Grant Seltzer. 10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data length of frags + frag_list may surpass old offset limit, from Liu Jian. 11) Various improvements to prog_tests in area of logging, test execution and by-name subtest selection, from Mykola Lysenko. 12) Simplify map_btf_id generation for all map types by moving this process to build time with help of resolve_btfids infra, from Menglong Dong. 13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*() helpers; the probing caused always to use old helpers, from Runqing Yang. 14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS tracing macros, from Vladimir Isaev. 15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel switched to memcg-based memory accouting a while ago, from Yafang Shao. 16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu. 17) Fix BPF selftests in two occasions to work around regressions caused by latest LLVM to unblock CI until their fixes are worked out, from Yonghong Song. 18) Misc cleanups all over the place, from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add libbpf's log fixup logic selftests libbpf: Fix up verifier log for unguarded failed CO-RE relos libbpf: Simplify bpf_core_parse_spec() signature libbpf: Refactor CO-RE relo human description formatting routine libbpf: Record subprog-resolved CO-RE relocations unconditionally selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests libbpf: Avoid joining .BTF.ext data with BPF programs by section name libbpf: Fix logic for finding matching program for CO-RE relocation libbpf: Drop unhelpful "program too large" guess libbpf: Fix anonymous type check in CO-RE logic bpf: Compute map_btf_id during build time selftests/bpf: Add test for strict BTF type check selftests/bpf: Add verifier tests for kptr selftests/bpf: Add C tests for kptr libbpf: Add kptr type tag macros to bpf_helpers.h bpf: Make BTF type match stricter for release arguments bpf: Teach verifier about kptr_get kfunc helpers bpf: Wire up freeing of referenced kptr bpf: Populate pairs of btf_id and destructor kfunc in btf bpf: Adapt copy_map_value for multiple offset case ... ==================== Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-21i40e, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski1-1/+0
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> I40E_XDP_{REDIR,CONSUMED} XDP_TX -> I40E_XDP_{TX,CONSUMED} XDP_DROP -> I40E_XDP_CONSUMED XDP_ABORTED -> I40E_XDP_CONSUMED XDP_PASS -> I40E_XDP_PASS Commit b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> I40E_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid I40E_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220421132126.471515-3-maciej.fijalkowski@intel.com
2022-04-15i40e, xsk: Diversify return values from xsk_wakeup call pathsMaciej Fijalkowski1-3/+3
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO return code as the case that XSK is not in the bound state. Returning same code from ndo_xsk_wakeup can be misleading and simply makes it harder to follow what is going on. Change ENXIOs in i40e's ndo_xsk_wakeup() implementation to EINVALs, so that when probing it is clear that something is wrong on the driver side, not the xsk_{recv,send}msg. There is a -ENETDOWN that can happen from both kernel/driver sides though, but I don't have a correct replacement for this on one of the sides, so let's keep it that way. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-10-maciej.fijalkowski@intel.com
2022-04-15i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-10/+23
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code I40E_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-7-maciej.fijalkowski@intel.com
2022-04-12i40e: Add Ethernet Connection X722 for 10GbE SFP+ supportMateusz Palczewski3-0/+3
Add support for Ethernet Connection X722 for 10GbE SFP+ cards. Make possible for the driver to bind to the card. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12i40e: Add vsi.tx_restart to i40e ethtool statsNabil S. Alramli1-0/+1
Add vsi.tx_restart to the i40e driver ethtool statistics Signed-off-by: Nabil S. Alramli <dev@nalramli.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12i40e: Add tx_stopped statJoe Damato6-2/+12
Track TX queue stop events and export the new stat with ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12i40e: Add support for MPLS + TSOJoe Damato2-19/+48
This change adds support for TSO of MPLS packets. In my tests with tcpdump it seems to work. Note this test setup has a 9000 byte MTU: MPLS (label 100, exp 0, [S], ttl 64) IP srcip.50086 > dstip.1234: Flags [P.], seq 593345:644401, ack 0, win 420, options [nop,nop,TS val 45022534 ecr 1722291395], length 51056 IP dstip.1234 > srcip.50086: Flags [.], ack 593345, win 122, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 602289, win 105, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 620177, win 71, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 MPLS (label 100, exp 0, [S], ttl 64) IP srcip.50086 > dstip.1234: Flags [P.], seq 644401:655953, ack 0, win 420, options [nop,nop,TS val 45022534 ecr 1722291395], length 11552 IP dstip.1234 > srcip.50086: Flags [.], ack 638065, win 37, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 644401, win 25, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 653345, win 8, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 655953, win 3, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 Signed-off-by: Joe Damato <jdamato@fastly.com> Co-developed-by: Mike Gallo <mgallo@fastly.com> Signed-off-by: Mike Gallo <mgallo@fastly.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>