summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)AuthorFilesLines
2014-11-03i40e: remove debugfs dump statsShannon Nelson1-91/+2
The debugfs dump stats wasn't being kept up-to-date, was redundant with the ethtool output, and didn't offer any useful additional info. Rather than continue trying to keep them aligned, just remove the debugfs command. Change-ID: Id130ed9aef01c6369ab662c7b4c5ec5b1dbc5b40 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <Jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-03i40e: avoid disable of interrupt when changing ITRJesse Brandeburg1-2/+0
The call to irq_dynamic_disable was turning off the interrupt completely when trying to set ITR to 0 (for lowest moderation). Just remove the call as setting the values to 0 later in this function will suffice. Change-ID: I47caf1ecbe65653cf63ec833db93094cd83fd84d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-03i40e: fix link checking logicMitch Williams1-4/+7
If the interface is closed, but VFs exist, current code will spam all the VFs with link messages every second. This is because the link event code was looking at netif_carrier_ok() without checking to see if the interface was actually open. Refactor the logic to only check the carrier state if the interface is actually open. This allows link changes to be reported correctly without spamming the VFs. Change-ID: If136e79bb3820d21ea4e39e332e8a9604efc2b2a Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-03i40e: Add condition to enter fdir flush and reinitAkeem G Abodunrin1-0/+6
When FD_SB/ATR are not enabled, do not allow flow director flush and reinit. Change-ID: Iafe261c1862992981615815551abd1ed9fada0a8 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/phy/marvell.c Simple overlapping changes in drivers/net/phy/marvell.c Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26i40e: _MASK vs _SHIFT typo in i40e_handle_mdd_event()Dan Carpenter1-2/+2
We accidentally mask by the _SHIFT variable. It means that "event" is always zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24i40e: Bump versionCatherine Sullivan1-1/+1
Bump i40e version to 1.0.21. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e: Moving variable declaration out of the loopsAkeem G Abodunrin1-4/+3
Move the three variables out of the loop, so it only declares once. Change-ID: I436913777c7da3c16dc0031b59e3ffa61de74718 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e: Add 10GBaseT supportMitch Williams4-5/+34
Add driver support for 10GBaseT device. Change-ID: I4be6ed847ac0bddd220b9878a95c523b32038174 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e: process link events when setting up switchMitch Williams1-0/+8
Add code to handle link events when updating the PF switch. This allows link information to be properly provided to VFs in all cases. Change-ID: If314c95f3d39259ef4c40a4a3b823381e28fb24f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e: Fix a bug where Rx would stop after some timeAnjali Singhai Jain1-4/+20
Move the setting of flow control because this should be done at a pf level not a vsi level. Also add a sleep and restart an to fix a bug where Rx would stop after some stress. Change-ID: I9a93d8c2ff27c39339eb00bc4ec1225e43900be0 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e/i40evf: Use usleep_range() instead of udelay()Neerav Parikh2-4/+4
As per the Documentation/timers/timers-howto.txt it is preferred to use usleep_range() instead of udelay() if the delay value is > 10us in non-atomic contexts. So, replacing all the instances of udelay() with 10 or greater than 10 micro seconds delay in the driver and using usleep_range() instead. Change-ID: Iaa2ab499a4c26f6005e5d86cc421407ef9de16c7 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e/i40evf: Fix whitespace indentationJeff Kirsher1-1070/+1069
This is one small step in making the indentation more consistent. If we truly want to align values, then use tabs rather than spaces. Change-ID: I12368bc77a52f296d1843fdcb67201a7d7cd4749 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com>
2014-10-24i40e: enable LSE poke and simplify link stateJesse Brandeburg1-23/+16
The driver can do a simpler job of managing link state by simply using the admin queue receive event for link events as a doorbell that tells the driver to update link state. Additionally, add a workaround will help make sure the link state in the hardware is consistent with the link state the driver is reporting by refreshing the link state every service task interval. Change-ID: Ib95b5b7b8cc016e97d8009f6363c9f9eed301444 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-24i40e: mask phy eventsJesse Brandeburg3-0/+47
Tell the firmware what kind of link related events the driver is interested in. In this case, just link up/down and qualified module events are the ones the driver really cares about. Change-ID: If132c812c340c8e1927c2caf6d55185296b66201 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-09i40e: skb->xmit_more supportEric Dumazet1-44/+46
Support skb->xmit_more in i40e is straightforward : we need to move around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped() before taking the decision to not kick the NIC. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-02i40e/igb: Convert to dev_consume_skb_any()Rick Jones1-1/+1
Convert two more Intel NIC drivers to dev_consume_skb_any() to help make dropped packet profiling sane. Signed-off-by: Rick Jones <rick.jones2@hp.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2014-09-04i40e: use global pci_vfs_assigned() to replace local i40e_vfs_are_assigned()Ethan Zhao1-31/+2
There is global funcion pci_vfs_assigned(), so use it instead of composing local one. Signed-off-by: Ethan Zhao <ethan.kernel@gmail.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e/i40evf: Bump i40e/i40evf versionsCatherine Sullivan1-1/+1
Bump i40e version to 1.0.11 and i40evf version to 1.0.5. Change-ID: I63a60fa2efe82aae87a8a3095f43218db57d46ce Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com>
2014-09-04i40e: fix panic due to too-early Tx queue enableJesse Brandeburg1-1/+1
This fixes the panic under traffic load when resetting. This issue could also show up if/whenever there is a Tx-timeout. Change-ID: Ie393a1f17fd5d962e56fc3bfe784899ef25402f5 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Fix an issue when PF reset failsAnjali Singhai Jain2-3/+11
We shouldn't restart Admin queue subtask if PF reset fails since we do not have the AQ setup at that point. This patch makes sure we disable AQ clean subtask when PF reset fails. This will resolve an occasional kernel panic when PF reset fails for some reason. Change-ID: I11a747773362a8c5c0ad7a10cd34be0bda8eb9e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: make warning less verboseJesse Brandeburg1-14/+12
The driver is un-necessarily printing a warning that is only marginally useful to the user. Make the warning only print if extended driver string printing is enabled, other messages related to a reset event will still continue to print. Change-ID: I5e8beca6516a2f176cd2e72b0ac2b3b909e6c953 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Tell OS link is going down when calling set_phy_configCatherine Sullivan1-3/+18
Since we don't seem to be getting an LSE telling us link is going down during set_phy_config (but we do get an LSE telling us we are coming back up), fake one for the OS and tell them link is going down. Also do an atomic restart no matter what because there are times the user may want to end with link up even if they started with link down (like if they accidentally set it to a speed that can't link and are trying to fix it). Change-ID: I0a642af9c1d0feb67bce741aba1a9c33bd349ed6 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Remove unnecessary assignmentSerey Kong1-1/+0
Remove unnecessary setting of "ret" variable as it's already set at the top of the function. Change-ID: Icaccfc67f335817a23579b7c43625d59ad6c9925 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Change wording to be more consistentSerey Kong3-3/+3
Change "spoofck" to "spoofchk" to be consistent with as defined in netdev. Change-ID: I9866d6284cb5f92c8d71dc0776c6d1e71dfb62a5 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Allow user to change link settings if link is downCatherine Sullivan1-1/+2
Allow the user to change auto-negotiation and speed settings if link is down. Change-ID: I372967c627682b5e1835f623a7cbf41b21b51043 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Add dual speed module supportCatherine Sullivan2-20/+13
Now that fw has implemented dual speed module support, we can add ours. Also, add the phy type for 1G LR/SR and set its media type to fiber. Lastly, instead of a WARN_ON if the phy type is not recognized just print a warning. Change-ID: I2e5227d4a8c2907b0ed423038e5dbce774e466b0 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-30i40e: Set skb->csum_level for encapsulated checksumTom Herbert1-1/+1
Set skb->csum_level instead of skb->encapsulation when indicating CHECKSUM_UNNECESSARY for an encapsulated checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27i40e/i40evf: Bump i40e & i40evf versionCatherine Sullivan1-3/+3
Bump versions for i40e to 1.0.4 and i40evf to 1.0.1. Change-ID: I960c04da2c91bdf1d02f8e5011e68c34a634122d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e/i40evf: Ignore a driver perceived Tx hang if the number of desc pending < 4Anjali Singhai Jain4-1/+14
We are seeing situations where the driver sees a hang with less than 4 desc pending, if the driver chooses to ignore it the queue progresses forward and the stack never experiences a real hang. With this patch we will log a stat when this situation happens "tx_sluggish" will increment and we can see some more details at a higher debug level. Other than that we will ignore this particular case of Tx hang. Change-ID: I7d1d1666d990e2b12f4f6bed0d17d22e1b6410d5 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: quiet complaints when removing default MAC VLAN filter and make ↵Shannon Nelson1-29/+70
set_mac reversible Older firmware has an incorrect MAC VLAN filter that needs to be replaced at startup, and now newer firmware doesn't have this problem. With this change we no longer complain if the remove fails, and we only add the new filter if the remove succeeded. Setting a new LAA worked the first time, but didn't work well in successive operations, including returning to the HW default address. This simplifies the code that was trying to be too smart. Lastly, this pulls the hardware default mac address out into separate handling code and keeps the broadcast filtering from getting munged. Change-ID: I1f54b002def04ffef2546febb9a4044385452f85 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e/i40evf: add max buf len to aq debug print helperShannon Nelson3-9/+13
There is at least one case in the Firmware API where the response to a command changes the buffer size field in the AQ descriptor to a larger number than what the request's buffer size started as. This is in addition to setting an error flag and is in order to tell the requester how much larger a buffer is required for the answer. We need to be sure not to use that number when dumping the contents of the data buffer because it can send us into the weeds and generate an invalid pointer exception. This patch adds a max buffer size parameter to the print helper to be sure the code knows when to stop. Change-ID: Ib84f7ed72140fe9d600086d8f2002fc5d8753092 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: Add checks and message for Qualified Module infoCarolyn Wyborny1-0/+14
This patch adds a check during handle_link_event for unqualified module when link is down and there is a module plugged. If found, print a message. Change-ID: Ibd8666d77d3044c2a3dd4d762d3ae9ac6e18e943 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: set num_queue_pairs to num configured by VFAshish Shah1-5/+8
Change vsi->num_queue_pairs to equal the number that are configured by the VF. This, in turn, limits the number of queues that are enable/disabled. This fixes the mismatched case for when a VF configures fewer queues than is allocated to it by the PF. Change other sections to use alloc_queue_pairs as warranted. Change-ID: I0de1b55c9084e7be6acc818da8569f12128a82c2 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: Enable l2tsel bit for VLAN tag controlShannon Nelson1-0/+1
Enable the l2tsel bit on Rx queue contexts that are assigned to VFs so that the VF can get the stripped VLAN tag. Change-ID: I7d9bc56238a9ea9baf5e8a97e69b9e27ebb9d169 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: Add a FD flush counter to ethtoolAnjali Singhai Jain3-0/+11
This helps know how many times the interface had to flush and replay FD filter table, which gives an indication on how often we are getting FD table full situation. Also check on certain pf states before proceeding to add or delete filters since we can't add or delete filters if we are in those states. Change-ID: I97f5bbbea7146833ea61af0e08ea794fccba1780 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: ATR policy change to flush the table to clean stale ATR rulesAnjali Singhai Jain4-20/+111
Instead of disabling ATR when we get a programming error, we now will wait it out to see if some room gets created by ATR rule deletion. If we still have too many errors and ATR filter count did not change much, its time to flush and replay. We no more auto-disable ATR when we have errors in programming. The disabling of ATR when we get programming error was buggy and was still adding new rules and causing continuous errors. With this policy change we flush instead when we see too many errors. ATR is still disabled if we add a SB rule for TCP/IPv4 flow type, more logic is added to re-enable it once all SB TCP/IPv4 rules are gone. Change-ID: I77edcbeab9500c72a7e0bd7b5c5b113ced133a9c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: Some FD message fixesAnjali Singhai Jain1-10/+28
Change the message that gets printed when adding/deleting a filter to the SB, so that user can tell if a filter was added or deleted. Print filter add failures only in case of SB filters. For ATR the information is not useful to the user and hence suppress it unless in higher debug mode. Change-ID: I78d7a7a6ecfa82a38a582b0d7b4da038355e3735 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: Update flow director error messages to reduce user confusionCarolyn Wyborny1-17/+16
This patch changes the wording of the flow director add/remove and asynchronous failure messages to include fd_id to try and add some way to track the operations on a given fd_id. Its not perfect, but its better than what we had as PCTYPE can apply to several different filter requests. This patch also removes a redundant message when filter addition fails due to full condition. Change-ID: Icf58b0603d4f162d9fc542f11a74866a907049f2 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-26i40e: Fix TSO and hw checksums for non-accelerated vlan packets.Vlad Yasevich1-1/+1
This device claims TSO and checksum support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to support TSO and hw checksums. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO and checksum information. This results in corrupted frames sent on the wire. This patch extract the protocol value correctly and corrects TSO and checksums for non-accelerated traffic. Fix this by using vlan_get_protocol() helper. CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Carolyn Wyborny <carolyn.wyborny@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> CC: Greg Rose <gregory.v.rose@intel.com> CC: Alex Duyck <alexander.h.duyck@intel.com> CC: John Ronciak <john.ronciak@intel.com> CC: Mitch Williams <mitch.a.williams@intel.com> CC: Linux NICS <linux.nics@intel.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-15i40e: fix PTP bugJesse Brandeburg1-1/+1
The receive hang detection routine was never being run when PTP was enabled. Change-ID: I200f35b0f3190d31b595df89d678f4c8a2131ba0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-15i40e: Fix a few potential VF dereferencesAnjali Singhai Jain1-11/+19
In some functions we might be doing potential dereference without a check. This patch puts the check in place for all these functions. Also fix the "for loops" so that we increment VF at the right place so that we always do it even if we are short-circuiting the loop through continue. Change-ID: Id4276cfb1e841031bb7b6d6790c414242f364a9f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-15i40e: Fix for recent kernel panicAnjali Singhai Jain1-3/+15
Whenever we get a Tx hang we issue a PFR, which means we send AQ messages to VFS about the reset coming. Unfortunately with the recent fix to be able to send messages to all VFS which earlier was not happening at all we now are sending messages to not just the VFS that are up but also to VFS that are not up. AQ complains about this and sends us an error in ARQ called LAN overflow event for a queue. We check if the queue belongs to a VF and if it does we try to send a vc_notify_vf_reset message to that VF. Well if the VF is not up/enabled we will be entering this function with a non-active VF id. In this function we were assuming VF struct is populated but it won't be if the VF is not active. Change-ID: Ic6733cda4582d3609fe6d83b2872bb2dcdc73f4a Signed-off-by: Ashish N Shah <ashish.n.shah@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-15Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-12i40e: Cleaning up missing null-terminate in conjunction with strncpyRickard Strandqvist1-8/+8
Replacing strncpy with strlcpy to avoid strings that lacks null terminate. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-12i40e: use correct structure type name in sizeofJulia Lawall1-1/+1
Correct typo in the name of the type given to sizeof. Because it is the size of a pointer that is wanted, the typo has no impact on compilation or execution. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). The semantic patch used can be found in message 0 of this patch series. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-12i40e: fix sparse non static symbol warningWei Yongjun1-3/+3
Fixes the following sparse warnings: drivers/net/ethernet/intel/i40e/i40e_nvm.c:254:13: warning: symbol 'i40e_write_nvm_aq' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-12i40e: Fix missing uapi/linux/dcbnl.h include in i40e_fcoe.cLucas Tanure1-0/+1
Fix missing include in Intel i40e driver. Without this include linux next tree won't compile. Signed-off-by: Lucas Tanure <tanure@linux.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 20:01:22 +0300