| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Transmit Packet Steering (XPS) maps cpu numbers to transmit
queues. By running the same connection on the same set of cpu's,
contention for the queue and cache miss rate can be minimized.
When assigning a cpu mask for a tranmit queues irq number, assign
the same cpu mask as the set of cpu's that XPS should use for that
queue.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CPU's are added and removed, ibmvnic devices will reassign
hint values. Introduce a new cpu hotplug state CPUHP_IBMVNIC_DEAD
to signal to ibmvnic devices that the CPU has been removed and it
is time to reset affinity hint assignments. On the other hand,
when CPU's are being added, add a state instance to
CPUHP_AP_ONLINE_DYN which will trigger a reassignment of affinity
hints once the new CPU's are online. This implementation is based
on the virtio_net driver.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assign affinity hints to ibmvnic device queue interrupts.
Affinity hints are assigned and removed during sub-crq init and
teardown, respectively. This update should improve latency if
utilized as interrupt lines and processing are more equally
distributed among CPU's. This implementation is based on the
virtio_net driver.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/can/pch_can.c
ae64438be192 ("can: dev: fix skb drop check")
1dd1b521be85 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, the default number of transmit queues was 16. Due to
resource concerns, set to 8 queues instead. Still allow the user
to set more queues (max 16) if they like.
Since the driver is virtualized away from the physical NIC, the purpose
of multiple queues is purely to allow for parallel calls to the
hypervisor. Therefore, there is no noticeable effect on performance by
reducing queue count to 8.
Fixes: d926793c1de9 ("ibmveth: Implement multi queue on xmit")
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.
Fixes: 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If of_device_register() returns error, the of node and the
name allocated in dev_set_name() is leaked, call put_device()
to give up the reference that was set in device_initialize(),
so that of node is put in logical_port_release() and the name
is freed in kobject_cleanup().
Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221025130011.1071357-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
netif_stop_all_queues must be called before calling H_FREE_LOGICAL_LAN.
As a result, we can remove the pool_config field from the ibmveth
adapter structure.
Some device configuration changes call ibmveth_close in order to free
the current resources held by the device. These functions then make
their changes and call ibmveth_open to reallocate and reserve resources
for the device.
Prior to this commit, the flag pool_config was used to tell ibmveth_close
that it should not halt the transmit queue. pool_config was introduced in
commit 860f242eb534 ("[PATCH] ibmveth change buffer pools dynamically")
to avoid interrupting the tx flow when making rx config changes. Since
then, other commits adopted this approach, even if making tx config
changes.
The issue with this approach was that the hypervisor freed all of
the devices control structures after the hcall H_FREE_LOGICAL_LAN
was performed but the transmit queues were never stopped. So the higher
layers in the network stack would continue transmission but any
H_SEND_LOGICAL_LAN hcall would fail with H_PARAMETER until the
hypervisor's structures for the device were allocated with the
H_REGISTER_LOGICAL_LAN hcall in ibmveth_open. This resulted in
no real networking harm but did cause several of these error
messages to be logged: "h_send_logical_lan failed with rc=-4"
So, instead of trying to keep the transmit queues alive during network
configuration changes, just stop the queues, make necessary changes then
restart the queues.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement channel management functions to allow dynamic addition and
removal of transmit queues. The `ethtool --show-channels` and
`ethtool --set-channels` commands can be used to get and set the
number of queues, respectively. Allow the ability to add as many
transmit queues as available processors but never allow more than the
hard maximum of 16. The number of receive queues is one and cannot be
modified.
Depending on whether the requested number of queues is larger or
smaller than the current value, either allocate or free long term
buffers. Since long term buffer construction and destruction can
occur in two different areas, from either channel set requests or
device open/close, define functions for performing this work. If
allocation of a new buffer fails, then attempt to revert back to the
previous number of queues.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The `ndo_start_xmit` function is protected by a spinlock on the tx queue
being used to transmit the skb. Allow concurrent calls to
`ndo_start_xmit` by using more than one tx queue. This allows for
greater throughput when several jobs are trying to transmit data.
Introduce 16 tx queues (leave single rx queue as is) which each
correspond to one DMA mapped long term buffer.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than DMA mapping and unmapping every outgoing skb, copy the skb
into a buffer that was mapped during the drivers open function. Copying
the skb and its frags have proven to be more time efficient than
mapping and unmapping. As an effect, performance increases by 3-5
Gbits/s.
Allocate and DMA map one continuous 64KB buffer at `ndo_open`. This
buffer is maintained until `ibmveth_close` is called. This buffer is
large enough to hold the largest possible linnear skb. During
`ndo_start_xmit`, copy the skb and all of it's frags into the continuous
buffer. By manually linnearizing all the socket buffers, time is saved
during memcpy as well as more efficient handling in FW.
As a result, we no longer need to worry about the firmware limitation
of handling a max of 6 frags. So, we only need to maintain 1 descriptor
instead of 6 and can hardcode 0 for the other 5 descriptors during
h_send_logical_lan.
Since, DMA allocation/mapping issues can no longer arise in xmit
functions, we can further reduce code size by removing the need for a
bounce buffer on DMA errors.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw
Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool
Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2
Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5}
Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena
Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet
Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a reset, there may have been transmits in flight that are no
longer valid and cannot be fulfilled. Resetting and clearing the
queues is insufficient; each skb also needs to be explicitly freed
so that upper levels are not left waiting for confirmation of a
transmit that will never happen. If this happens frequently enough,
the apparent backlog will cause TCP to begin "congestion control"
unnecessarily, culminating in permanently decreased throughput.
Fixes: d7c0ef36bde03 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change")
Tested-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Switch all Ethernet drivers which use custom napi weights
to the new API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
powerpc's asm/prom.h includes some headers that it doesn't
need itself.
In order to clean powerpc's asm/prom.h up in a further step,
first clean all files that include asm/prom.h
Some files don't need asm/prom.h at all. For those ones,
just remove inclusion of asm/prom.h
Some files don't need any of the items provided by asm/prom.h,
but need some of the headers included by asm/prom.h. For those
ones, add the needed headers that are brought by asm/prom.h at
the moment and remove asm/prom.h
Some files really need asm/prom.h but also need some of the
headers included by asm/prom.h. For those one, leave asm/prom.h
but also add the needed headers so that they can be removed
from asm/prom.h in a later step.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/09a13d592d628de95d30943e59b2170af5b48110.1651663857.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
include/linux/netdevice.h
net/core/dev.c
6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats")
794c24e9921f ("net-core: rx_otherhost_dropped to core_stats")
https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/
drivers/net/wan/cosa.c
d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()")
89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards")
https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae
When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.
Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow multiple LTBs in the txpool's ltb_set. i.e rather than using
a single large LTB, use several smaller LTBs.
The first n-1 LTBs will all be of the same size. The size of the last
LTB in the set depends on the number of buffers and buffer (mtu) size.
This strategy hopefully allows more reuse of the initial LTBs and also
reduces the chances of an allocation failure (of the large LTB) when
system is low in memory.
Suggested-by: Brian King <brking@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow multiple LTBs in the rxpool's ltb_set. The first n-1 LTBs will all
be of the same size. The size of the last LTB in the set depends on the
number of buffers and buffer (mtu) size.
Having a set of LTBs per pool provides a couple of benefits.
First, with the current value of IBMVNIC_MAX_LTB_SIZE of 16MB, with an
MTU of 9000, we need a LTB (DMA buffer) of that size but the allocation
can fail in low memory conditions. With a set of LTBs per pool, we can
use several smaller (8MB) LTBs and hopefully have fewer allocation
failures. (See also comments in ibmvnic.h on the trade-off with smaller
LTBs)
Second since the kernel limits the size of the DMA buffer to 16MB (based
on MAX_ORDER), with a single DMA buffer per pool, the pool is also limited
to 16MB. This in turn limits the number of buffers per pool to 1763 when
MTU is 9000. With a set of LTBs per pool, we can have upto the max of 4096
buffers per pool even when MTU is 9000.
Suggested-by: Brian King <brking@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define and use interfaces that treat the long term buffer (LTB) of an
rxpool as a set of LTBs rather than a single LTB. The set only has one
LTB for now.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define a helper to map a given txpool buffer into its corresponding long
term buffer (LTB) and offset. Currently there is just one LTB per txpool
so the mapping is trivial. When we add support for multiple LTBs per
txpool, this helper will be more useful.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define a helper to map a given rx pool buffer into its corresponding long
term buffer (LTB) and offset. Currently there is just one LTB per pool so
the mapping is trivial. When we add support for multiple LTBs per pool,
this helper will be more useful.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local variable 'index' is heavily used in some functions and is
confusing with the presence of other "index" fields like pool->index,
->consumer_index, etc. Rename it to bufidx to better reflect that its
the index of a buffer in the pool.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in overtime fixes, no conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable)
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c9cfcc] sch_direct_xmit+0xec/0x330
[c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0
[c000000000c00ad4] __dev_queue_xmit+0x394/0x730
[c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding]
[c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding]
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c00ca4] __dev_queue_xmit+0x564/0x730
[c000000000cf97e0] neigh_hh_output+0xd0/0x180
[c000000000cfa69c] ip_finish_output2+0x31c/0x5c0
[c000000000cfd244] __ip_queue_xmit+0x194/0x4f0
[c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0
[c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0
[c000000000d2d984] tcp_retransmit_skb+0x34/0x130
[c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0
[c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330
[c000000000d317bc] tcp_write_timer+0x5c/0x200
[c000000000243270] call_timer_fn+0x50/0x1c0
[c000000000243704] __run_timers.part.0+0x324/0x460
[c000000000243894] run_timer_softirq+0x54/0xa0
[c000000000ea713c] __do_softirq+0x15c/0x3e0
[c000000000166258] __irq_exit_rcu+0x158/0x190
[c000000000166420] irq_exit+0x20/0x40
[c00000000002853c] timer_interrupt+0x14c/0x2b0
[c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
The immediate cause of the crash is the access of tx_scrq in the following
snippet during a reset, where the tx_scrq can be either NULL or an address
that will soon be invalid:
ibmvnic_xmit()
{
...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;
if (test_bit(0, &adapter->resetting)) {
...
}
But beyond that, the call to ibmvnic_xmit() itself is not safe during a
reset and the reset path attempts to avoid this by stopping the queue in
ibmvnic_cleanup(). However just after the queue was stopped, an in-flight
ibmvnic_complete_tx() could have restarted the queue even as the reset is
progressing.
Since the queue was restarted we could get a call to ibmvnic_xmit() which
can then access the bad tx_scrq (or other fields).
We cannot however simply have ibmvnic_complete_tx() check the ->resetting
bit and skip starting the queue. This can race at the "back-end" of a good
reset which just restarted the queue but has not cleared the ->resetting
bit yet. If we skip restarting the queue due to ->resetting being true,
the queue would remain stopped indefinitely potentially leading to transmit
timeouts.
IOW ->resetting is too broad for this purpose. Instead use a new flag
that indicates whether or not the queues are active. Only the open/
reset paths control when the queues are active. ibmvnic_complete_tx()
and others wake up the queue only if the queue is marked active.
So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()
->resetting = true
->tx_queues_active = false
disable tx queues
...
->tx_queues_active = true
start tx queues
B. Tx interrupt in ibmvnic_complete_tx():
if (->tx_queues_active)
netif_wake_subqueue();
To ensure that ->tx_queues_active and state of the queues are consistent,
we need a lock which:
- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple queues in the adapter (so they don't
become serialized)
Use rcu_read_lock() and have the reset thread synchronize_rcu() after
updating the ->tx_queues_active state.
While here, consolidate a few boolean fields in ibmvnic_adapter for
better alignment.
Based on discussions with Brian King and Dany Madden.
Fixes: 7ed5b31f4a66 ("net/ibmvnic: prevent more than one thread from running in reset")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We currently don't allow queuing resets when adapter is in VNIC_PROBING
state - instead we throw away the reset and return EBUSY. The reasoning
is probably that during ibmvnic_probe() the ibmvnic_adapter itself is
being initialized so performing a reset during this time can lead us to
accessing fields in the ibmvnic_adapter that are not fully initialized.
A review of the code shows that all the adapter state neede to process a
reset is initialized before registering the CRQ so that should no longer
be a concern.
Further the expectation is that if we do get a reset (transport event)
during probe, the do..while() loop in ibmvnic_probe() will handle this
by reinitializing the CRQ.
While that is true to some extent, it is possible that the reset might
occur _after_ the CRQ is registered and CRQ_INIT message was exchanged
but _before_ the adapter state is set to VNIC_PROBED. As mentioned above,
such a reset will be thrown away. While the client assumes that the
adapter is functional, the vnic server will wait for the client to reinit
the adapter. This disconnect between the two leaves the adapter down
needing manual intervention.
Because ibmvnic_probe() has other work to do after initializing the CRQ
(such as registering the netdev at a minimum) and because the reset event
can occur at any instant after the CRQ is initialized, there will always
be a window between initializing the CRQ and considering the adapter
ready for resets (ie state == PROBED).
So rather than discarding resets during this window, allow queueing them
- but only process them after the adapter is fully initialized.
To do this, introduce a new completion state ->probe_done and have the
reset worker thread wait on this before processing resets.
This change brings up two new situations in or just after ibmvnic_probe().
First after one or more resets were queued, we encounter an error and
decide to retry the initialization. At that point the queued resets are
no longer relevant since we could be talking to a new vnic server. So we
must purge/flush the queued resets before restarting the initialization.
As a side note, since we are still in the probing stage and we have not
registered the netdev, it will not be CHANGE_PARAM reset.
Second this change opens up a potential race between the worker thread
in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the
following sequence of events:
1. Register CRQ
2. Get transport event before CRQ_INIT completes.
3. Tasklet schedules reset:
a) add rwi to list
b) schedule_work() to start worker thread which runs
and waits for ->probe_done.
4. ibmvnic_probe() decides to retry, purges rwi_list
5. Re-register crq and this time rest of probe succeeds - register
netdev and complete(->probe_done).
6. Worker thread resumes in __ibmvnic_reset() from 3b.
7. Worker thread sets ->resetting bit
8. ibmvnic_open() comes in, notices ->resetting bit, sets state
to IBMVNIC_OPEN and returns early expecting worker thread to
finish the open.
9. Worker thread finds rwi_list empty and returns without
opening the interface.
If this happens, the ->ndo_open() call is effectively lost and the
interface remains down. To address this, ensure that ->rwi_list is
not empty before setting the ->resetting bit. See also comments in
__ibmvnic_reset().
Fixes: 6a2fb0e99f9c ("ibmvnic: driver initialization for kdump/kexec")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear ->failover_pending flag that may have been set in the previous
pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open()
call would be misled into thinking a failover is pending and assuming
that the reset worker thread would open the adapter. If this pass of
registering the CRQ succeeds (i.e there is no transport event), there
wouldn't be a reset worker thread.
This would leave the adapter unconfigured and require manual intervention
to bring it up during boot.
Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently initialize the ->init_done completion/return code fields
before issuing a CRQ_INIT command. But if we get a transport event soon
after registering the CRQ the taskslet may already have recorded the
completion and error code. If we initialize here, we might overwrite/
lose that and end up issuing the CRQ_INIT only to timeout later.
If that timeout happens during probe, we will leave the adapter in the
DOWN state rather than retrying to register/init the CRQ.
Initialize the completion before registering the CRQ so we don't lose
the notification.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Finish initializing the adapter before registering netdev so state
is consistent.
Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we get a transport event, set the error and mark the init as
complete so the attempt to send crq-init or login fail sooner
rather than wait for the timeout.
Fixes: bbd669a868bb ("ibmvnic: Fix completion structure initialization")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define and use a helper to flush the reset queue.
Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should initialize ->init_done_rc before calling complete(). Otherwise
the waiting thread may see ->init_done_rc as 0 before we have updated it
and may assume that the CRQ was successful.
Fixes: 6b278c0cb378 ("ibmvnic delay complete()")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a tiny memory leak when flushing the reset work queue.
Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tools/testing/selftests/net/mptcp/mptcp_join.sh
34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
857898eb4b28 ("selftests: mptcp: add missing join check")
6ef84b1517e0 ("selftests: mptcp: more robust signal race test")
https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c
fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions")
c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information")
09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr")
84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr")
efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow")
3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If client is unable to initiate a failover reset via H_VIOCTL hcall, then
it should schedule a failover reset as a last resort. Otherwise, there is
no need to do a last resort.
Fixes: 334c42414729 ("ibmvnic: improve failover sysfs entry")
Reported-by: Cris Forno <cforno12@outlook.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220221210545.115283-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There were a fair amount of changes to workaround a firmware bug leaving
a pending interrupt after migration of the ibmvnic device :
commit 2df5c60e198c ("net/ibmvnic: Ignore H_FUNCTION return from H_EOI
to tolerate XIVE mode")
commit 284f87d2f387 ("Revert "net/ibmvnic: Fix EOI when running in
XIVE mode"")
commit 11d49ce9f794 ("net/ibmvnic: Fix EOI when running in XIVE mode.")
commit f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset")
Here is the final one taking into account the XIVE interrupt mode.
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Cc: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.
If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.
This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:
[102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq
[102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq
[102056] ibmvnic 30000003 env3: Replenished 8 pools
Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000a3c840
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
...
CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1
Workqueue: events_long __ibmvnic_reset [ibmvnic]
NIP: c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820
REGS: c0000000548e37e0 TRAP: 0300 Not tainted (5.16.0-rc5-autotest-g6441998e2e37)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28248484 XER: 00000004
CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
...
NIP [c000000000a3c840] napi_enable+0x20/0xc0
LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
Call Trace:
[c0000000548e3a80] [0000000000000006] 0x6 (unreliable)
[c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
[c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
[c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570
[c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660
[c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0
[c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
38a0fff6 e92d1100 f9210028 39200000 <e9030010> f9010020 60420000 e9210020
---[ end trace 5f8033b08fd27706 ]---
Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220208001918.900602-1-sukadev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With previous bug fix, ->wait_capability flag is no longer needed and can
be removed.
Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ibmvnic_tasklet() continuously spins waiting for responses to all
capability requests. It does this to avoid encountering an error
during initialization of the vnic. However if there is a bug in the
VIOS and we do not receive a response to one or more queries the
tasklet ends up spinning continuously leading to hard lock ups.
If we fail to receive a message from the VIOS it is reasonable to
timeout the login attempt rather than spin indefinitely in the tasklet.
Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should
send out the next protocol message type. i.e when we get back responses
to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs.
Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we
send out the QUERY_IP_OFFLOAD CRQ.
We currently increment ->running_cap_crqs as we send out each CRQ and
have the ibmvnic_tasklet() send out the next message type, when this
running_cap_crqs count drops to 0.
This assumes that all the CRQs of the current type were sent out before
the count drops to 0. However it is possible that we send out say 6 CRQs,
get preempted and receive all the 6 responses before we send out the
remaining CRQs. This can result in ->running_cap_crqs count dropping to
zero before all messages of the current type were sent and we end up
sending the next protocol message too early.
Instead initialize the ->running_cap_crqs upfront so the tasklet will
only send the next protocol message after all responses are received.
Use the cap_reqs local variable to also detect any discrepancy (either
now or in future) in the number of capability requests we actually send.
Currently only send_query_cap() is affected by this behavior (of sending
next message early) since it is called from the worker thread (during
reset) and from application thread (during ->ndo_open()) and they can be
preempted. send_request_cap() is only called from the tasklet which
processes CRQ responses sequentially, is not be affected. But to
maintain the existing symmtery with send_query_capability() we update
send_request_capability() also.
Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If auto-priority-failover (APF) is enabled and there are at least two
backing devices of different priorities, some resets like fail-over,
change-param etc can cause at least two back to back failovers. (Failover
from high priority backing device to lower priority one and then back
to the higher priority one if that is still functional).
Depending on the timimg of the two failovers it is possible to trigger
a "hard" reset and for the hard reset to fail due to failovers. When this
occurs, the driver assumes that the network is unstable and disables the
VNIC for a 60-second "settling time". This in turn can cause the ethtool
command to fail with "No such device" while the vnic automatically recovers
a little while later.
Given that it's possible to have two back to back failures, allow for extra
failures before disabling the vnic for the settling time.
Fixes: f15fde9d47b8 ("ibmvnic: delay next reset if hard reset fails")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the ibmveth sysfs code to use default_groups
field which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Cristobal Forno <cforno12@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IBMVNIC_STATS_TIMEOUT and IBMVNIC_INIT_FAILED are not used in the driver.
Remove them.
Suggested-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
