summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)AuthorFilesLines
2018-01-26net: hns3: add int_gl_idx setup for VFFuyun Liang2-0/+13
Just like PF, if the int_gl_idx of VF does not be set, the default interrupt coalesce index of VF is 0. But it should be GL1 for TX queues and GL0 for RX queues. This patch adds the int_gl_idx setup for VF. Fixes: 200ecda42598 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26net: hns3: add get/set_coalesce support to VFFuyun Liang1-0/+2
This patch adds ethtool_ops.get/set_coalesce support to VF. Since PF and VF share the same get/set_coalesce interface, we only need to set hns3_get/set_coalesce to the ethtool_ops when supporting get/set_coalesce for VF. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: hns3: converting spaces into tabs to avoid checkpatch.pl warningSalil Mehta1-2/+2
Spaces were mistakenly used instead of tabs in some of the code related to reset functionality, which caused checkpatch.pl errors. These were missed earlier so fixing them now. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: hns3: add net status led support for fiber portJian Shen3-0/+113
Check the net status per second, include port speed, total rx/tx packets and link status. Updating the led status for fiber port. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: hns3: add ethtool -p support for fiber portJian Shen4-0/+104
Add led location support for fiber port. The led will keep blinking when locating. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: hns3: add manager table initialization for hardwareFuyun Liang2-0/+123
The manager table is empty by default. If it is not initialized, the management pkgs like LLDP will be dropped by hardware. Default entries need to be added to manager table. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: hns3: add support for get_regsFuyun Liang4-1/+205
This patch adds get_regs support for ethtool cmd. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns: Fix for variable may be used uninitialized warningsHuazhong Tan2-21/+38
When !CONFIG_REGMAP hns throws compiler warnings since dsaf_read_syscon ignores the return result from regmap_read, which allows val to be uninitialized. Fixes: 86897c960b49 ("net: hns: add syscon operation for dsaf") Reported-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: check for NULL function pointer in hns3_nic_set_featuresJian Shen1-2/+4
It's necessary to check hook whether being defined before calling, improve the reliability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add feature check when feature changedJian Shen1-12/+15
Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking for other features. Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add int_gl_idx setup for TX and RX queuesFuyun Liang3-0/+21
If the int_gl_idx does not be set, the default interrupt coalesce index is 0. The TX queues and the RX queues will both use the GL0 as the interrupt coalesce GL switch. But it should be GL1 for TX queues and GL0 for RX queues. This patch adds the int_gl_idx setup for TX queues and RX queues. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: change the unit of GL value macroFuyun Liang1-4/+4
Previously, driver used 2us as the GL unit. The time unit ethtool command "-c" and "-C" use is 1us, so now the GL unit driver uses actually is 1us. This patch changes the unit of GL value macro from 2us to 1us. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: remove unused GL setup functionFuyun Liang1-12/+0
Since the TX GL and the RX GL need to be set separately, hns3_set_vector_coalesc_gl() has been replaced with hns3_set_vector_coalesce_rx_gl() and hns3_set_vector_coalesce_tx_gl(). This patch removes hns3_set_vector_coalesc_gl(). Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: refactor GL update functionFuyun Liang1-19/+16
The GL update function uses the max GL value between tx_int_gl and rx_int_gl to set both new tx_int_gl and new rx_int_gl. Therefore, User can not enable TX GL self-adaptive or RX GL self-adaptive individually. This patch refactors the code to update the TX GL and the RX GL separately, making user can enable TX GL self-adaptive or RX GL self-adaptive individually. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: refactor interrupt coalescing init functionFuyun Liang1-9/+20
In the hardware, the coalesce configurable registers include GL0, GL1, GL2. In the driver, the TX queues use the register GL1 and the RX queues use the register GL0. This function initializes the configuration of the interrupt coalescing, but does not distinguish between the TX direction and the RX direction. It will cause some confusion. This patch refactors the function to initialize the TX GL and the RX GL separately. And the initialization of related variables also is added to this patch. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.set_coalesce support to PFFuyun Liang3-4/+188
This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.get_coalesce support to PFFuyun Liang3-0/+40
This patch adds ethtool_ops.get_coalesce support to PF. Whilst our hardware supports per queue values, external interfaces support only a single shared value. As such we use the values for queue 0. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: remove TSO config command from VF driverPeng Li2-28/+0
Only main PF can config TSO MSS length according to hardware. This patch removes TSO config command from VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.get_channels support for VFPeng Li2-0/+31
This patch supports the ethtool's get_channels() for VF. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: hns3: report the function type the same line with hns3_nic_get_stats64Peng Li1-2/+2
The function type should be on the same line with the function name, or it may cause display error if a patch edit the function. There is am example following: https://www.spinics.net/lists/netdev/msg476141.html Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Revert "net: hns3: Add packet statistics of netdev"Peng Li1-79/+1
This reverts commit 8491000754796c838a0081c267f9dd54ad2ccba3. It is duplicate to add statistics of netdev for ethtool -S. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Add more packet size statiscticsJian Shen2-7/+56
The statistics of rx/tx packets size greater than 1518 are not detailed. This patch adds more statistics for different packet size range. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: remove redundant semicolonPeng Li1-1/+1
There is a redundant semicolon, this patch removes it. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: fix for not setting pause parametersFuyun Liang3-7/+98
Pause parameters include source address, transmit gap and pause time. The default value of the pause source address is zero in the hardware. Default pause parameters need to be set to the hardware. Also, when setting new mac address, the pause source address need to be updated. Fixes: 9dc2145d910e ("net: hns3: Add support for PFC setting in TM module") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: add MTU initialization for hardwareFuyun Liang1-2/+20
When initializing the MAC, the MTU vlaue need to be set to the hardware too. Otherwise, the MTU value of software will be different from the MTU value of hardware. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: fix for changing MTUFuyun Liang1-0/+2
when changing MTU, The new MTU must need to be set to netdevice. Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: fix for setting MTUFuyun Liang3-5/+16
When setting MTU, actually what we do is configuring the max frame size for the hardware. ETH_HLEN、ETH_FCS_LEN and VLAN_HLEN must need to be considered. And the frame size which is less than the default value should not be set to the hardware. Because in the hardware, the the max frame size not only controls the RX packet size, but also controls the TX packet size. the RX packets whose size are greater than the setting value will be dropped. This patch fixes the bug setting a error max frame size to hardware. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: fix for updating fc_mode_last_timeFuyun Liang1-9/+6
commit a9c782822166 ("net: hns3: add support for set_pauseparam") adds set_pauseparam support for ethtool cmd, but forgets to update fc_mode_last_time when PFC mode is disabled in hclge_cfg_pauseparam(). The wrong fc_mode_last_time will be used to update flow control mode when lldpad has been running. As a result, when using the ethtool command "-a", user will get a wrong pause parameter. This patch adds the fc_mode_last_time update when PFC mode is disabled. Fixes: a9c782822166 ("net: hns3: add support for set_pauseparam") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Fix a response data read error of tqp statistics queryJian Shen2-4/+4
The result of tqp statistics query was read with an error position, fix it according to the user manual. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Add packet statistics of netdevJian Shen1-1/+79
Add packet statistics of netdev for ethtool -S, in order to show the statistics data for current net device. Remove update_stats() calling because it has been completed in hns3_get_netdev_stats(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Remove a useless member of struct hns3_statsJian Shen1-3/+1
The member "stats_size" of struct hns3_stats is useless, remove it and fix the macro definition which has uses this struct. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Fix an error macro definition of HNS3_TQP_STATJian Shen1-1/+2
The member "stats_offset" was designed to indicate the offset of each member of struct ring_stats in struct hns3_enet_ring, but forgot to add the offset of the member in struct ring_stats. Fixes: 496d03e960a ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Fix a loop index error of tqp statistics queryJian Shen1-5/+5
An error loop index was used while querying statistics data of tqps, which may cause call trace. Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Fix an error of total drop packet statisticsJian Shen1-2/+9
The dropped tx/rx packets number of each tqp should also be counted into the total drop tx/rx packets numbers. Fixes: 76ad4f0ee74 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Mask the packet statistics query when NIC is downJian Shen1-0/+8
Update the HNS3_NIC_STATE_DOWN bit when NIC state changes. When NIC is down, mask the packet statistics for querying with ifconfig command. It's a common practice. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Modify the update period of packet statisticsJian Shen3-1/+17
It takes more than 200 query response messages between driver and IMP, while updating the packet statistics. It's too heavy for IMP to update it per second. Extend the update period of packet statistics data from 1 second to 300 seconds(if too long, the statistics may overflow). As a result, we need to update it while querying with ifconfig tool to keep the statistics data fresh. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Remove repeat statistic of rx_errorsJian Shen1-1/+0
The igu_rx_err_pkt indicates the same error with mac_rx_fcs_err_pkt_num, so remove it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Fix spelling errorsJian Shen2-9/+9
Fix spelling error "overrsize" --> "oversize". Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Unify the strings display of packet statisticsJian Shen4-66/+69
Some members of packet statistics are named in different styles. This patch unifies them with new internal name rules, the main modification are below: trans --> tx rcv --> rx rcb_q%d_tx --> txq#%d rcb_q%d_rx --> rxq#%d sw_err_cnt(tx side) --> tx_dropped sw_err_cnt(rx side) --> rx_dropped pkts --> packets tx_err_cnt --> errors rx_err_cnt --> errors Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Disable VFs change rxvlan offload statusJian Shen1-2/+3
Rxvlan offload status can only be changed by PF. Initialize the value of NETIF_F_HW_VLAN_CTAG_RX bit of hw_features for VFS to false, make sure user can't be able to change it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: hns3: Add ethtool interface for vlan filterJian Shen3-3/+25
This patch adds vlan filter enable switch to support ethtool -K ethX rx-vlan-filter on/off. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: hns: add ACPI mode support for ethtool -pJian Shen2-2/+57
The locate operation interface of fiber port can only work with DT mode. Add a new interface to control the locate led for ACPI mode. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Tested-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28net: hns3: hns3_get_channels() can be statickbuild test robot1-2/+2
Fixes: 482d2e9c1cc7 ("net: hns3: add support to query tqps number") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: change TM sched mode to TC-based mode when SRIOV enabledPeng Li1-4/+1
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This patch change the TM sched mode to TC-based mode in initialization process. Fixes: cc9bb43ab394 ("net: hns3: Add tc-based TM support for sriov enabled port") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: Increase the default depth of bucket for TM shaperPeng Li1-2/+2
Burstiness of a flow is determined by the depth of a bucket, When the upper rate of shaper is large, the current depth of a bucket is not enough. The default upper rate of shaper is 100G, so increase the depth of a bucket according to UM. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: add support for querying advertised pause frame by ethtool ethxPeng Li3-0/+32
This patch adds support for querying advertised pause frame by using ethtool command(ethtool ethx). Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: add Asym Pause support to phy default featuresFuyun Liang1-0/+1
commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") adds default supported features for phy, but our hardware also supports Asym Pause. This patch adds Asym Pause support to phy default features to prevent Asym Pause can not be advertised when the phy negotiates flow control. Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: add support to update flow control settings after autonegPeng Li3-0/+41
When auto-negotiation is enabled, the MAC flow control settings is based on the flow control negotiation result. And it should be configured after a valid link has been established. This patch adds support to update flow control settings after auto-negotiation has completed. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: add support for set_pauseparamPeng Li4-1/+98
This patch adds set_pauseparam support for ethtool cmd. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: hns3: fix for getting auto-negotiation state in hclge_get_autonegFuyun Liang1-0/+4
When phy exists, we use the value of phydev.autoneg to represent the auto-negotiation state of hardware. Otherwise, we use the value of mac.autoneg to represent it. This patch fixes for getting a error value of auto-negotiation state in hclge_get_autoneg(). Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 07:01:21 +0300