summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale
AgeCommit message (Collapse)AuthorFilesLines
2015-01-14net: fec: fix MDIO bus assignement for dual fec SoC'sStefan Agner2-4/+7
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09net: fec: fix NULL pointer dereference in fec_enet_timeout_workHubert Feurstein1-0/+1
This patch initialises the fep->netdev pointer. This pointer was not initialised at all, but is used in fec_enet_timeout_work and in some error paths. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16net: fec: Fix NAPI raceNimrod Andy1-12/+7
Do camera capture test on i.MX6q sabresd board, and save the capture data to nfs rootfs. The command is: gst-launch-1.0 -e imxv4l2src device=/dev/video1 num-buffers=2592000 ! tee name=t ! queue ! imxv4l2sink sync=false t. ! queue ! vpuenc ! queue ! mux. pulsesrc num-buffers=3720937 blocksize=4096 ! 'audio/x-raw, rate=44100, channels=2' ! queue ! imxmp3enc ! mpegaudioparse ! queue ! mux. qtmux name=mux ! filesink location=video_recording_long.mov After about 10 hours running, there have net watchdog timeout kernel dump: ... WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x2b4/0x2d8() NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.24-01051-gdb840b7 #440 [<80014e6c>] (unwind_backtrace) from [<800118ac>] (show_stack+0x10/0x14) [<800118ac>] (show_stack) from [<806ae3f0>] (dump_stack+0x78/0xc0) [<806ae3f0>] (dump_stack) from [<8002b504>] (warn_slowpath_common+0x68/0x8c) [<8002b504>] (warn_slowpath_common) from [<8002b558>] (warn_slowpath_fmt+0x30/0x40) [<8002b558>] (warn_slowpath_fmt) from [<8055e0d4>] (dev_watchdog+0x2b4/0x2d8) [<8055e0d4>] (dev_watchdog) from [<800352d8>] (call_timer_fn.isra.33+0x24/0x8c) [<800352d8>] (call_timer_fn.isra.33) from [<800354c4>] (run_timer_softirq+0x184/0x220) [<800354c4>] (run_timer_softirq) from [<8002f420>] (__do_softirq+0xc0/0x22c) [<8002f420>] (__do_softirq) from [<8002f804>] (irq_exit+0xa8/0xf4) [<8002f804>] (irq_exit) from [<8000ee5c>] (handle_IRQ+0x54/0xb4) [<8000ee5c>] (handle_IRQ) from [<80008598>] (gic_handle_irq+0x28/0x5c) [<80008598>] (gic_handle_irq) from [<800123c0>] (__irq_svc+0x40/0x74) Exception stack(0x80d27f18 to 0x80d27f60) 7f00: 80d27f60 0000014c 7f20: 8858c60e 0000004d 884e4540 0000004d ab7250d0 80d34348 00000000 00000000 7f40: 00000001 00000000 00000017 80d27f60 800702a4 80476e6c 600f0013 ffffffff [<800123c0>] (__irq_svc) from [<80476e6c>] (cpuidle_enter_state+0x50/0xe0) [<80476e6c>] (cpuidle_enter_state) from [<80476fa8>] (cpuidle_idle_call+0xac/0x154) [<80476fa8>] (cpuidle_idle_call) from [<8000f174>] (arch_cpu_idle+0x8/0x44) [<8000f174>] (arch_cpu_idle) from [<80064c54>] (cpu_startup_entry+0x100/0x158) [<80064c54>] (cpu_startup_entry) from [<80cd8a9c>] (start_kernel+0x304/0x368) ---[ end trace 09ebd32fb032f86d ]--- ... There might have a race in napi_schedule(), leaving interrupts disabled forever. After these patch, the case still work more than 40 hours running. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds9-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-11gianfar: Fix dma check map error when DMA_API_DEBUG is enabledKevin Hao1-28/+56
We need to use dma_mapping_error() to check the dma address returned by dma_map_single/page(). Otherwise we would get warning like this: WARNING: at lib/dma-debug.c:1140 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc2-next-20141029 #196 task: c0834300 ti: effe6000 task.ti: c0874000 NIP: c02b2c98 LR: c02b2c98 CTR: c030abc4 REGS: effe7d70 TRAP: 0700 Not tainted (3.18.0-rc2-next-20141029) MSR: 00021000 <CE,ME> CR: 22044022 XER: 20000000 GPR00: c02b2c98 effe7e20 c0834300 00000098 00021000 00000000 c030b898 00000003 GPR08: 00000001 00000000 00000001 749eec9d 22044022 1001abe0 00000020 ef278678 GPR16: ef278670 ef278668 ef278660 070a8040 c087f99c c08cdc60 00029000 c0840d44 GPR24: c08be6e8 c0840000 effe7e78 ef041340 00000600 ef114e10 00000000 c08be6e0 NIP [c02b2c98] check_unmap+0x51c/0x9e4 LR [c02b2c98] check_unmap+0x51c/0x9e4 Call Trace: [effe7e20] [c02b2c98] check_unmap+0x51c/0x9e4 (unreliable) [effe7e70] [c02b31d8] debug_dma_unmap_page+0x78/0x8c [effe7ed0] [c03d1640] gfar_clean_rx_ring+0x208/0x488 [effe7f40] [c03d1a9c] gfar_poll_rx_sq+0x3c/0xa8 [effe7f60] [c04f8714] net_rx_action+0xc0/0x178 [effe7f90] [c00435a0] __do_softirq+0x100/0x1fc [effe7fe0] [c0043958] irq_exit+0xa4/0xc8 [effe7ff0] [c000d14c] call_do_irq+0x24/0x3c [c0875e90] [c00048a0] do_IRQ+0x8c/0xf8 [c0875eb0] [c000ed10] ret_from_except+0x0/0x18 For TX, we need to unmap the pages which has already been mapped and free the skb before return. For RX, move the dma mapping and error check to gfar_new_skb(). We would reuse the original skb in the rx ring when either allocating skb failure or dma mapping error. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net: fec: only enable mdio interrupt before phy device link upNimrod Andy1-1/+4
Before phy device link up, we only enable FEC mdio interrupt, which is more reasonable. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net: fec: clear all interrupt events to support i.MX6SXNimrod Andy1-1/+1
For i.MX6SX FEC controller, there have interrupt mask and event field extension. To support all SOCs FEC, we clear all interrupt events during MAVC initial process. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net: fec: reset fep link status in suspend functionNimrod Andy1-0/+6
On some i.MX6 serial boards, phy power and refrence clock are supplied or controlled by SOC. When do suspend/resume test, the power and clock are disabled, so phy device link down. For current driver, fep->link is still up status, which cause extra operation like below code. To avoid the dumy operation, we set fep->link to down when phy device is real down. ... if (fep->link) { napi_disable(&fep->napi); netif_tx_lock_bh(ndev); fec_stop(ndev); netif_tx_unlock_bh(ndev); napi_enable(&fep->napi); fep->link = phy_dev->link; status_change = 1; } ... Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: fec: avoid kernal crash by NULL pointer when no phy connectionNimrod Andy1-0/+2
On i.MX6SX sabreauto board, when there have no phy daughter board connection, there have kernel crash by NULL pointer: fec 2188000.ethernet eth0: could not attach to PHY Unable to handle kernel NULL pointer dereference at virtual address 00000220 pgd = 80004000 [00000220] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.24-01042-g27eaeea-dirty #405 task: d8078000 ti: d8076000 task.ti: d8076000 PC is at mutex_lock+0x10/0x54 LR is at phy_start+0x14/0x68 pc : [<806ad4e4>] lr : [<803b0f90>] psr: 60000113 sp : d8077d80 ip : 00000000 fp : d83cc000 r10: 0000100c r9 : d83cc800 r8 : 00000000 r7 : d83bcd0c r6 : 00000200 r5 : 00000220 r4 : 00000220 r3 : 00000000 r2 : 00000000 r1 : d83bcd90 r0 : 00000220 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xd8076240) Stack: (0xd8077d80 to 0xd8078000) 7d80: 00000000 803b0f90 00000001 00000000 d83bc800 803be034 00000007 805c3fb4 7da0: 00000003 80d4e0bc 805efcb8 fffffff1 fffffff0 00000000 00000000 d8077dfc 7dc0: 0000000d 80d6ce80 80d126b0 800499c8 d83bc800 d83bc800 806f0f40 d83bc82c 7de0: 00000000 00000000 80d6ce80 80d126b0 0000016b 80540250 d8076008 d83bc800 7e00: 0000016b d83bc800 00001003 00000001 00001002 805404d4 d83bc800 00000120 7e20: 00001002 00001002 00000000 805405d4 d83bc800 00000001 80d126c0 00001002 7e40: 80dbc5dc 80d02024 00000000 806ae360 00000002 d6128420 d6127198 12400000 7e60: 00000000 00000000 00000002 d61271e8 00000000 12400000 d801674c 800e49f0 7e80: d6127198 d6124e58 00000000 80238848 d61271c4 00000000 00000001 d8016700 7ea0: 80dd2e00 80d752c0 80d752c0 80cfdaec 0000010c 80239430 806c2e90 d800f080 7ec0: d800f380 804e46b4 ffffffbc 80d15cb0 00000007 80d752c0 80d752c0 80d01e94 7ee0: 0000010c d8076030 00000000 800088cc 80dbaba4 80bd411c d80a6f00 806b1e04 7f00: 00000000 00000000 00000000 80125b84 00000000 80d2c56c 60000113 00000001 7f20: ef7ff9df 806c80cc 0000010c 80043f5c 80c95eb8 00000007 ef7ffa1d 00000007 7f40: 80d2c55c 80d15cb0 00000007 80d752c0 80d752c0 80ccc50c 0000010c 80d0a114 7f60: 80d0a10c 80cccc04 00000007 00000007 80ccc50c 806ae410 00000000 8004cb84 7f80: 80d17bc0 00000000 806a4bd4 00000000 00000000 00000000 00000000 00000000 7fa0: 00000000 806a4bdc 00000000 8000e5f8 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 1e79a7bb e5337f77 [<806ad4e4>] (mutex_lock) from [<803b0f90>] (phy_start+0x14/0x68) [<803b0f90>] (phy_start) from [<803be034>] (fec_enet_open+0x448/0x5dc) [<803be034>] (fec_enet_open) from [<80540250>] (__dev_open+0xa8/0x110) [<80540250>] (__dev_open) from [<805404d4>] (__dev_change_flags+0x88/0x170) [<805404d4>] (__dev_change_flags) from [<805405d4>] (dev_change_flags+0x18/0x48) [<805405d4>] (dev_change_flags) from [<80d02024>] (ip_auto_config+0x190/0xf94) [<80d02024>] (ip_auto_config) from [<800088cc>] (do_one_initcall+0xe8/0x144) [<800088cc>] (do_one_initcall) from [<80cccc04>] (kernel_init_freeable+0x104/0x1c8) [<80cccc04>] (kernel_init_freeable) from [<806a4bdc>] (kernel_init+0x8/0xec) [<806a4bdc>] (kernel_init) from [<8000e5f8>] (ret_from_fork+0x14/0x3c) Code: e92d4010 e3a03000 e1a04000 ee073fba (e1903f9f) Add phydev check to fix the issue. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24net: fec: init maximum receive buffer size for ring1 and ring2Nimrod Andy2-5/+10
i.MX6SX fec support three rx ring1, the current driver lost to init ring1 and ring2 maximum receive buffer size, that cause receving frame date length error. The driver reports "rcv is not +last" error log in user case. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: remove unused return value from swap_buffer()Lothar Waßmann1-3/+1
The return value of swap_buffer() is not used by any caller, thus remove it. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: simplify loop counter handling in swap_buffer()Lothar Waßmann1-1/+1
Eliminate the DIV_ROUND_UP() and change the loop counter increment to 4 instead. This results in saving 6 instructions in the functions assembly code. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: use swab32s() instead of cpu_to_be32()Lothar Waßmann1-1/+1
when swap_buffer() is being called, we know for sure, that we need to byte swap the data. Furthermore, this function is called for swapping data in both directions. Thus cpu_to_be32() is semantically not correct for all use cases. Use swab32s() to reflect this. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: improve access to quirk flags by copying them into ↵Lothar Waßmann2-68/+39
fec_enet_private struct Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: change type of 'bufdesc_ex' to boolLothar Waßmann2-4/+2
fep->bufdesc_ex is treated as a boolean value, thus declare it as such. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: properly parenthesize macro argsLothar Waßmann1-15/+16
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: consistently use lower case chars as hex digitsLothar Waßmann1-44/+44
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18net: fec: indentation cleanupLothar Waßmann1-54/+54
consistently use TABs for indentation Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+19
Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07net: fec: fix regression on i.MX28 introduced by rx_copybreak supportLothar Waßmann1-4/+19
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance") introduced a regression for i.MX28. The swap_buffer() function doing the endian conversion of the received data on i.MX28 may access memory beyond the actual packet size in the DMA buffer. fec_enet_copybreak() does not copy those bytes, so that the last bytes of a packet may be filled with invalid data after swapping. This will likely lead to checksum errors on received packets. E.g. when trying to mount an NFS rootfs: UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36 Do the byte swapping and copying to the new skb in one go if necessary. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+8
2014-11-04Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman9-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-03net: fec: fix suspend broken on multiple MACs silliconsNimrod Andy1-8/+8
On i.MX6SX sdb platform, there has two same enet MACs, after system up, just eth0 is up, and then do suspend/resume test: [ 50.437967] PM: Syncing filesystems ... done. [ 50.476924] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 50.490093] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done. [ 50.559771] ------------[ cut here ]------------ [ 50.564453] WARNING: CPU: 0 PID: 575 at drivers/clk/clk.c:851 __clk_disable+0x60/0x6c() [ 50.572475] Modules linked in: [ 50.575578] CPU: 0 PID: 575 Comm: sh Not tainted 3.18.0-rc2-next-20141031-00007-gf61135b #21 [ 50.584031] Backtrace: [ 50.586550] [<80011ecc>] (dump_backtrace) from [<8001206c>] (show_stack+0x18/0x1c) [ 50.594136] r6:808a7a54 r5:00000000 r4:00000000 r3:00000000 [ 50.599920] [<80012054>] (show_stack) from [<806ab3c0>] (dump_stack+0x80/0x9c) [ 50.607187] [<806ab340>] (dump_stack) from [<8002a3e8>] (warn_slowpath_common+0x6c/0x8c) [ 50.615294] r5:00000353 r4:00000000 [ 50.618940] [<8002a37c>] (warn_slowpath_common) from [<8002a42c>] (warn_slowpath_null+0x24/0x2c) [ 50.627738] r8:00000000 r7:be144c44 r6:be015600 r5:80070013 r4:be015600 [ 50.634573] [<8002a408>] (warn_slowpath_null) from [<804f8d4c>] (__clk_disable+0x60/0x6c) [ 50.642777] [<804f8cec>] (__clk_disable) from [<804f8e5c>] (clk_disable+0x2c/0x38) [ 50.650359] r4:be015600 r3:00000000 [ 50.654006] [<804f8e30>] (clk_disable) from [<80420ab4>] (fec_enet_clk_enable+0xc4/0x258) [ 50.662196] r5:be3cb620 r4:be3cb000 [ 50.665838] [<804209f0>] (fec_enet_clk_enable) from [<80421178>] (fec_suspend+0x30/0x180) [ 50.674026] r7:be144c44 r6:be144c10 r5:8037f5a4 r4:be3cb000 [ 50.679802] [<80421148>] (fec_suspend) from [<8037f5d8>] (platform_pm_suspend+0x34/0x64) [ 50.687906] r10:00000000 r9:00000000 r8:00000000 r7:be144c44 r6:be144c10 r5:8037f5a4 [ 50.695852] r4:be144c10 r3:80421148 [ 50.699511] [<8037f5a4>] (platform_pm_suspend) from [<8038784c>] (dpm_run_callback.isra.14+0x34/0x6c) [ 50.708764] [<80387818>] (dpm_run_callback.isra.14) from [<80387f00>] (__device_suspend+0x12c/0x2a4) [ 50.717909] r9:8098ec8c r8:80973bec r6:00000002 r5:811c7038 r4:be144c10 [ 50.724746] [<80387dd4>] (__device_suspend) from [<803894fc>] (dpm_suspend+0x64/0x224) [ 50.732675] r8:80973bec r7:be144c10 r6:8098ec24 r5:811c7038 r4:be144cc4 [ 50.739509] [<80389498>] (dpm_suspend) from [<8038999c>] (dpm_suspend_start+0x60/0x68) [ 50.747438] r10:8082fa24 r9:00000000 r8:00000004 r7:00000003 r6:00000000 r5:8116ec80 [ 50.755386] r4:00000002 [ 50.757969] [<8038993c>] (dpm_suspend_start) from [<800679d8>] (suspend_devices_and_enter+0x90/0x3ec) [ 50.767202] r4:00000003 r3:8116eca0 [ 50.770843] [<80067948>] (suspend_devices_and_enter) from [<80067f40>] (pm_suspend+0x20c/0x2a4) [ 50.779553] r8:00000004 r7:00000003 r6:00000000 r5:8116ec8c r4:00000003 [ 50.786394] [<80067d34>] (pm_suspend) from [<80066858>] (state_store+0x70/0xc0) [ 50.793718] r6:8116ec90 r5:00000003 r4:bd88a800 r3:0000006d [ 50.799496] [<800667e8>] (state_store) from [<802b0384>] (kobj_attr_store+0x1c/0x28) [ 50.807251] r10:bd399f78 r8:00000000 r7:bd88a800 r6:bd88a800 r5:00000004 r4:bd085680 [ 50.815219] [<802b0368>] (kobj_attr_store) from [<80153090>] (sysfs_kf_write+0x54/0x58) [ 50.823252] [<8015303c>] (sysfs_kf_write) from [<80151fd8>] (kernfs_fop_write+0xd0/0x194) [ 50.831441] r6:00000004 r5:bd08568c r4:bd085680 r3:8015303c [ 50.837220] [<80151f08>] (kernfs_fop_write) from [<800eddb4>] (vfs_write+0xb8/0x1a8) [ 50.844975] r10:00000000 r9:00000000 r8:00000000 r7:bd399f78 r6:01336408 r5:00000004 [ 50.852924] r4:bc584dc0 [ 50.855505] [<800edcfc>] (vfs_write) from [<800ee0b8>] (SyS_write+0x48/0x88) [ 50.862567] r10:00000000 r8:00000000 r7:01336408 r6:00000004 r5:bc584dc0 r4:bc584dc0 [ 50.870537] [<800ee070>] (SyS_write) from [<8000eb00>] (ret_fast_syscall+0x0/0x48) [ 50.878120] r9:bd398000 r8:8000ecc4 r7:00000004 r6:76f42b48 r5:01336408 r4:00000004 [ 50.885983] ---[ end trace 7545115d752a316a ]--- [ 50.890765] ------------[ cut here ]------------ The root cause is that eth1 is not opened and clock is not enabled, and .suspend() still call .fec_enet_clk_enable() to disable clock. To avoid the broken, let it check network device up status by calling .netif_running() before disable/enable clocks. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29gianfar: Implement PAUSE frame generation supportMatei Pavaluca3-2/+93
The hardware can automatically generate pause frames when the number of free buffers drops under a certain threshold, but in order to do this, the address of the last free buffer needs to be written to a specific register for each RX queue. This has to be done in 'gfar_clean_rx_ring' which is called for each RX queue. In order not to impact performance, by adding a register write for each incoming packet, this operation is done only when the PAUSE frame transmission is enabled. Whenever the link is readjusted, this capability is turned on or off. Signed-off-by: Matei Pavaluca <matei.pavaluca@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29Fix the way the local advertising flow options are determinedPavaluca Matei-B466101-1/+5
Local flow control options needed in order to resolve the negotiation are incorrectly calculated. Previously 'mii_advertise_flowctrl' was called to determine the local advertising options, but these were determined based on FLOW_CTRL_RX/TX flags which are never set through ethtool. The patch simply translates from ethtool flow options to mii flow options. Signed-off-by: Pavaluca Matei <matei.pavaluca@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29Add flow control support flags to gianfar's capabilitiesPavaluca Matei-B466102-3/+4
The phy device supports 802.3x flow control, but the specific flags are not set in the phy initialisation code. Flow control flags need to be added to the supported capabilities of the phydev by the driver. This is needed in order for ethtool to work ('ethtool -A' code checks for these flags) Signed-off-by: Pavaluca Matei <matei.pavaluca@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-23net: fec: ptp: fix NULL pointer dereference if ptp_clock is not setPhilipp Zabel1-1/+2
Since commit 278d24047891 (net: fec: ptp: Enable PPS output based on ptp clock) fec_enet_interrupt calls fec_ptp_check_pps_event unconditionally, which calls into ptp_clock_event. If fep->ptp_clock is NULL, ptp_clock_event tries to dereference the NULL pointer. Since on i.MX53 fep->bufdesc_ex is not set, fec_ptp_init is never called, and fep->ptp_clock is NULL, which reliably causes a kernel panic. This patch adds a check for fep->ptp_clock == NULL in fec_enet_interrupt. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-22net: fs_enet: set back promiscuity mode after restartLEROY Christophe2-0/+6
After interface restart (eg: after link disconnection/reconnection), the bridge function doesn't work anymore. This is due to the promiscuous mode being cleared by the restart. The mac-fcc already includes code to set the promiscuous mode back during the restart. This patch adds the same handling to mac-fec and mac-scc. Tested with bridge function on MPC885 with FEC. Reported-by: Germain Montoies <germain.montoies@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: ethernet: freescale: fs_enet: drop owner assignment from platform_driversWolfram Sang3-3/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20net: ethernet: freescale: drop owner assignment from platform_driversWolfram Sang6-6/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-16gianfar: Add FCS to rx buffer size (fix)Claudiu Manoil1-1/+1
For each Rx frame the eTSEC writes its FCS (Frame Check Sequence) to the Rx buffer. The eTSEC h/w manual states in the "Receive Buffer Descriptor Field Descriptions" table: "Data length is the number of octets written by the eTSEC into this BD's data buffer if L is cleared (the value is equal to MRBLR), or, if L is set, the length of the frame including *CRC*, FCB (if RCTRL[PRSDEP > 00), preamble (if MACCFG2[PreAmRxEn]=1), time stamp (if RCTRL[TS] = 1) and any padding (RCTRL[PAL])." Though the FCS bytes are removed by the driver before passing the skb to the net stack, the Rx buffer size computation does not currently take into account the FCS bytes (4 bytes). Because the Rx buffer size is multiple of 512 bytes, leaving out the FCS is not a problem for the default MTU of 1500, as the Rx buffer size is 1536 in this case. However, for custom MTUs, where the difference between the MTU size and the Rx buffer size is less, this can be a problem as the computed Rx buffer size won't be enough to accomodate the FCS for a received frame that is big enough (close to MTU size). In such case the received frame is considered to be incomplete (L flag not set in the RxBD status) and silently dropped. Note that the driver does not currently support S/G on Rx, so it has to compute its Rx buffer size based on the MTU of the device. Reported-by: Kristian Otnes <kotnes@cisco.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16net: fec: ptp: fix convergence issue to support LinuxPTP stackNimrod Andy3-42/+56
iMX6SX IEEE 1588 module has one hw issue in capturing the ATVR register. The current SW flow is: ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK; ts_counter_ns = ENET0->ATVR; The ATVR value is not expected value that cause LinuxPTP stack cannot be convergent. ENET Block Guide/ Chapter for the iMX6SX (PELE) address the issue: After set ENET_ATCR[Capture], there need some time cycles before the counter value is capture in the register clock domain. The wait-time-cycles is at least 6 clock cycles of the slower clock between the register clock and the 1588 clock. So need something like: ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK; wait(); ts_counter_ns = ENET0->ATVR; For iMX6SX, the 1588 ts_clk is fixed to 25Mhz, register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns (40ns * 6). The patch add 1us delay before cpu read ATVR register. Changes V2: Modify the commit/comments log to describe the issue clearly. Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14net: fec: ptp: Enable PPS output based on ptp clockLuwei Zhou3-1/+205
FEC ptp timer has 4 channel compare/trigger function. It can be used to enable pps output. The pulse would be ouput high exactly on N second. The pulse ouput high on compare event mode is used to produce pulse per second. The pulse width would be one cycle based on ptp timer clock source.Since 31-bit ptp hardware timer is used, the timer will wrap more than 2 seconds. We need to reload the compare compare event about every 1 second. Signed-off-by: Luwei Zhou <b45643@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14net: fec: ptp: Use hardware algorithm to adjust PTP counter.Luwei Zhou2-12/+56
The FEC IP supports hardware adjustment for ptp timer. Refer to the description of ENET_ATCOR and ENET_ATINC registers in the spec about the hardware adjustment. This patch uses hardware support to adjust the ptp offset and frequency on the slave side. Signed-off-by: Luwei Zhou <b45643@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Fugang Duan <b38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14net: fec: ptp: Use the 31-bit ptp timer.Luwei Zhou1-4/+6
When ptp switches from software adjustment to hardware ajustment, linux ptp can't converge. It is caused by the IP limit. Hardware adjustment logcial have issue when ptp counter runs over 0x80000000(31 bit counter). The internal IP reference manual already remove 32bit free-running count support. This patch replace the 32-bit PTP timer with 31-bit. Signed-off-by: Luwei Zhou <b45643@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14net: fec: Fix sparse warnings with different lock contexts for basic blockNimrod Andy1-10/+14
reproduce: make ARCH=arm C=1 2>fec.txt drivers/net/ethernet/freescale/fec_main.o cat fec.txt sparse warnings: drivers/net/ethernet/freescale/fec_main.c:2916:12: warning: context imbalance in 'fec_set_features' - different lock contexts for basic block Christopher Li suggest to change as below: if (need_lock) { lock(); do_something_real(); unlock(); } else { do_something_real(); } Reported-by: Fabio Estevam <festevam@gmail.com> Suggested-by: Christopher Li <sparse@chrisli.org> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10net: fs_enet: error: 'SCCE_ENET_TXF' undeclaredLEROY Christophe2-2/+2
[linux-devel:devel-hourly-2014100909 3763/3915] drivers/net/ethernet/freescale/fs_enet/mac-scc.c:119:32: error: 'SCCE_ENET_TXF' undeclared Due to patch d43a396 net: fs_enet: Add NAPI TX, it appears that some target compilations are broken. This is due to the fact that unlike the FEC, the SCC and FCC don't have a TXF event (complete Frame transmitted) but only TXB (buffer transmitted). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09gianfar: Replace eieio with wmb for non-PPC archsClaudiu Manoil2-10/+19
Replace PPC specific eieio() with arch independent wmb() for other architectures, i.e. ARM. The eieio() macro is not defined on ARM and generates build error. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09gianfar: Replace spin_event_timeout() with arch independentClaudiu Manoil2-13/+34
Use arch independent code to replace the powerpc dependent spin_event_timeout() from gfar_halt_nodisable(). Added GRS/GTS read accessors to clean-up the implementation of gfar_halt_nodisable(). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09gianfar: Make MAC addr setup endian safe, cleanupClaudiu Manoil1-8/+7
Fix the 32-bit memory access that is not endian safe, i.e. not giving the desired byte layout for a LE CPU: tempval = *((u32 *) (tmpbuf + 4)), where 'char tmpbuf[]'. Get rid of rendundant local vars (tmpbuf[] and idx) and forced casts. Cleanup comments. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09gianfar: Exclude PPC specific errata handling from ARM buildsClaudiu Manoil1-0/+6
This excludes the PPC specific instructions for PPC based SoC (MPC85xx family) version identification from ARM builds. The PPC specific macro mfspr() from asm/reg.h is not defined by the ARM architecture. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09gianfar: Include missing headers for ARM buildsClaudiu Manoil1-0/+2
Include linux/of_address.h for of_iomap() and linux/of_irq.h for irq_of_parse_and_map(). This wasn't an issue for PPC, because these were implicitly included from asm/prom.h (via linux/of.h) for PPC builds only. ARM builds need these includes explicitly. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09net/fsl_pq_mdio: Replace spin_event_timeout() with arch independentClaudiu Manoil1-13/+23
spin_event_timeout() is PPC dependent, use an arch independent equivalent instead. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09net/fsl_pq_mdio: Use ioread/iowrite32be() portable accessorsClaudiu Manoil1-14/+14
in_be32()/out_be32() are not defined by ARM. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09net/fsl_pq_mdio: Fix asm/ucc.h compile error for ARMClaudiu Manoil1-0/+2
The UCC specific code included in fsl_pq_mdio.c (with function calls from asm/ucc.h) is already guarded by these config options, so this ARM build fix only provides consistency with the rest UCC specific code. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09net: fs_enet: Add NAPI TXLEROY Christophe5-11/+132
When using a MPC8xx as a router, 'perf' shows a significant time spent in fs_enet_interrupt() and fs_enet_start_xmit(). 'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent between spin_unlock_irqrestore() and the following instruction, hence in interrupt handling. This is due to the TX complete interrupt that fires after each transmitted packet. This patch modifies the handling of TX complete to use NAPI. With this patch, my NAT router offers a throughput improved by 21% Original performance: [root@localhost tmp]# scp toto pgs:/tmp toto 100% 256MB 2.8MB/s 01:31 Performance with the patch: [root@localhost tmp]# scp toto pgs:/tmp toto 100% 256MB 3.4MB/s 01:16 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09net: fs_enet: Remove non NAPI RXLEROY Christophe1-149/+15
In the probe function, use_napi is inconditionnaly set to 1. This patch removes all the code which is conditional to !use_napi, and removes use_napi which has then become useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06fec: Fix fec_enet_alloc_buffers() error pathFabio Estevam1-7/+10
When fec_enet_alloc_buffers() fails we should better undo the previous actions, which consists of: disabling the FEC clocks and putting the FEC pins into inactive state. The error path for fec_enet_mii_probe() is kept unchanged. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net: fec: fix build error at m68k platformFrank Li1-0/+1
reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross git checkout 1b7bde6d659d30f171259cc2dfba8e5dab34e735 make.cross ARCH=m68k m5275evb_defconfig make.cross ARCH=m68k All error/warnings: drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_rx_queue': >> drivers/net/ethernet/freescale/fec_main.c:1470:3: error: implicit declaration of function 'prefetch' [-Werror=implicit-function-declaration] prefetch(skb->data - NET_IP_ALIGN); ^ cc1: some warnings being treated as errors missed included prefetch.h Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-02net: fec: implement rx_copybreak to improve rx performanceNimrod Andy2-65/+145
- Copy short frames and keep the buffers mapped, re-allocate skb instead of memory copy for long frames. - Add support for setting/getting rx_copybreak using generic ethtool tunable Changes V3: * As Eric Dumazet's suggestion that removing the copybreak module parameter and only keep the ethtool API support for rx_copybreak. Changes V2: * Implements rx_copybreak * Rx_copybreak provides module parameter to change this value * Add tunable_ops support for rx_copybreak Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>