summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale
AgeCommit message (Collapse)AuthorFilesLines
2021-03-17net: enetc: force the RGMII speed and duplex instead of operating in inband modeVladimir Oltean2-10/+56
commit c76a97218dcbb2cb7cec1404ace43ef96c87d874 upstream. The ENETC port 0 MAC supports in-band status signaling coming from a PHY when operating in RGMII mode, and this feature is enabled by default. It has been reported that RGMII is broken in fixed-link, and that is not surprising considering the fact that no PHY is attached to the MAC in that case, but a switch. This brings us to the topic of the patch: the enetc driver should have not enabled the optional in-band status signaling for RGMII unconditionally, but should have forced the speed and duplex to what was resolved by phylink. Note that phylink does not accept the RGMII modes as valid for in-band signaling, and these operate a bit differently than 1000base-x and SGMII (notably there is no clause 37 state machine so no ACK required from the MAC, instead the PHY sends extra code words on RXD[3:0] whenever it is not transmitting something else, so it should be safe to leave a PHY with this option unconditionally enabled even if we ignore it). The spec talks about this here: https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/RGMIIv1_5F00_3.pdf Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17net: enetc: don't disable VLAN filtering in IFF_PROMISC modeVladimir Oltean1-5/+0
commit a74dbce9d4541888fe0d39afe69a3a95004669b4 upstream. Quoting from the blamed commit: In promiscuous mode, it is more intuitive that all traffic is received, including VLAN tagged traffic. It appears that it is necessary to set the flag in PSIPVMR for that to be the case, so VLAN promiscuous mode is also temporarily enabled. On exit from promiscuous mode, the setting made by ethtool is restored. Intuitive or not, there isn't any definition issued by a standards body which says that promiscuity has anything to do with VLAN filtering - it only has to do with accepting packets regardless of destination MAC address. In fact people are already trying to use this misunderstanding/bug of the enetc driver as a justification to transform promiscuity into something it never was about: accepting every packet (maybe that would be the "rx-all" netdev feature?): https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ This is relevant because there are use cases in the kernel (such as tc-flower rules with the protocol 802.1Q and a vlan_id key) which do not (yet) use the vlan_vid_add API to be compatible with VLAN-filtering NICs such as enetc, so for those, disabling rx-vlan-filter is currently the only right solution to make these setups work: https://lore.kernel.org/netdev/CA+h21hoxwRdhq4y+w8Kwgm74d4cA0xLeiHTrmT-VpSaM7obhkg@mail.gmail.com/ The blamed patch has unintentionally introduced one more way for this to work, which is to enable IFF_PROMISC, however this is non-portable because port promiscuity is not meant to disable VLAN filtering. Therefore, it could invite people to write broken scripts for enetc, and then wonder why they are broken when migrating to other drivers that don't handle promiscuity in the same way. Fixes: 7070eea5e95a ("enetc: permit configuration of rx-vlan-filter with ethtool") Cc: Markus Blöchl <Markus.Bloechl@ipetronik.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17net: enetc: fix incorrect TPID when receiving 802.1ad tagged packetsVladimir Oltean2-8/+29
commit 827b6fd046516af605e190c872949f22208b5d41 upstream. When the enetc ports have rx-vlan-offload enabled, they report a TPID of ETH_P_8021Q regardless of what was actually in the packet. When rx-vlan-offload is disabled, packets have the proper TPID. Fix this inconsistency by finishing the TODO left in the code. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17net: enetc: take the MDIO lock only once per NAPI poll cycleVladimir Oltean2-22/+11
commit 6d36ecdbc4410e61a0e02adc5d3abeee22a8ffd3 upstream. The workaround for the ENETC MDIO erratum caused a performance degradation of 82 Kpps (seen with IP forwarding of two 1Gbps streams of 64B packets). This is due to excessive locking and unlocking in the fast path, which can be avoided. By taking the MDIO read-side lock only once per NAPI poll cycle, we are able to regain 54 Kpps (65%) of the performance hit. The rest of the performance degradation comes from the TX data path, but unfortunately it doesn't look like we can optimize that away easily, even with netdev_xmit_more(), there just isn't any skb batching done, to help with taking the MDIO lock less often than once per packet. We need to change the register accessor type for enetc_get_tx_tstamp, because it now runs under the enetc_lock_mdio as per the new call path detailed below: enetc_msix -> napi_schedule -> enetc_poll -> enetc_lock_mdio -> enetc_clean_tx_ring -> enetc_get_tx_tstamp -> enetc_clean_rx_ring -> enetc_unlock_mdio Fixes: fd5736bf9f23 ("enetc: Workaround for MDIO register access issue") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17net: enetc: don't overwrite the RSS indirection table when initializingVladimir Oltean4-8/+18
commit c646d10dda2dcde82c6ce5a474522621ab2b8b19 upstream. After the blamed patch, all RX traffic gets hashed to CPU 0 because the hashing indirection table set up in: enetc_pf_probe -> enetc_alloc_si_resources -> enetc_configure_si -> enetc_setup_default_rss_table is overwritten later in: enetc_pf_probe -> enetc_init_port_rss_memory which zero-initializes the entire port RSS table in order to avoid ECC errors. The trouble really is that enetc_init_port_rss_memory really neads enetc_alloc_si_resources to be called, because it depends upon enetc_alloc_cbdr and enetc_setup_cbdr. But that whole enetc_configure_si thing could have been better thought out, it has nothing to do in a function called "alloc_si_resources", especially since its counterpart, "free_si_resources", does nothing to unwind the configuration of the SI. The point is, we need to pull out enetc_configure_si out of enetc_alloc_resources, and move it after enetc_init_port_rss_memory. This allows us to set up the default RSS indirection table after initializing the memory. Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories") Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04net: enetc: fix destroyed phylink dereference during unbindVladimir Oltean1-2/+3
[ Upstream commit 3af409ca278d4a8d50e91f9f7c4c33b175645cf3 ] The following call path suggests that calling unregister_netdev on an interface that is up will first bring it down. enetc_pf_remove -> unregister_netdev -> unregister_netdevice_queue -> unregister_netdevice_many -> dev_close_many -> __dev_close_many -> enetc_close -> enetc_stop -> phylink_stop However, enetc first destroys the phylink instance, then calls unregister_netdev. This is already dissimilar to the setup (and error path teardown path) from enetc_pf_probe, but more than that, it is buggy because it is invalid to call phylink_stop after phylink_destroy. So let's first unregister the netdev (and let the .ndo_stop events consume themselves), then destroy the phylink instance, then free the netdev. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04dpaa2-eth: fix memory leak in XDP_REDIRECTIoana Ciornei1-2/+12
[ Upstream commit e12be9139cca26d689fe1a9257054b76752f725b ] If xdp_do_redirect() fails, the calling driver should handle recycling or freeing of the page associated with the frame. The dpaa2-eth driver didn't do either of them and just incremented a counter. Fix this by trying to DMA map back the page and recycle it or, if the mapping fails, just free it. Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-17net: enetc: initialize the RFS and RSS memoriesVladimir Oltean2-0/+61
[ Upstream commit 07bf34a50e327975b21a9dee64d220c3dcb72ee9 ] Michael tried to enable Advanced Error Reporting through the ENETC's Root Complex Event Collector, and the system started spitting out single bit correctable ECC errors coming from the ENETC interfaces: pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 fsl_enetc 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.0: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.0: [14] CorrIntErr fsl_enetc 0000:00:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.1: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.1: [14] CorrIntErr Further investigating the port correctable memory error detect register (PCMEDR) shows that these AER errors have an associated SOURCE_ID of 6 (RFS/RSS): $ devmem 0x1f8010e10 32 0xC0000006 $ devmem 0x1f8050e10 32 0xC0000006 Discussion with the hardware design engineers reveals that on LS1028A, the hardware does not do initialization of that RFS/RSS memory, and that software should clear/initialize the entire table before starting to operate. That comes as a bit of a surprise, since the driver does not do initialization of the RFS memory. Also, the initialization of the Receive Side Scaling is done only partially. Even though the entire ENETC IP has a single shared flow steering memory, the flow steering service should returns matches only for TCAM entries that are within the range of the Station Interface that is doing the search. Therefore, it should be sufficient for a Station Interface to initialize all of its own entries in order to avoid any ECC errors, and only the Station Interfaces in use should need initialization. There are Physical Station Interfaces associated with PCIe PFs and Virtual Station Interfaces associated with PCIe VFs. We let the PF driver initialize the entire port's memory, which includes the RFS entries which are going to be used by the VF. Reported-by: Michael Walle <michael@walle.cc> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210204134511.2640309-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-07net: fec: put child node on error pathPan Bian1-1/+2
commit 0607a2cddb60f4548b55e28ac56a8d73493a45bb upstream. Also decrement the reference count of child device on error path. Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19net: ethernet: fs_enet: Add missing MODULE_LICENSEMichael Ellerman2-0/+2
[ Upstream commit 445c6198fe7be03b7d38e66fe8d4b3187bc251d4 ] Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE() into error") the ppc32_allmodconfig build fails with: ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o Add the missing MODULE_LICENSEs to fix the build. Both files include a copyright header indicating they are GPL v2. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pramRasmus Villemoes1-1/+8
[ Upstream commit 887078de2a23689e29d6fa1b75d7cbc544c280be ] Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12ethernet: ucc_geth: set dev->max_mtu to 1518Rasmus Villemoes1-0/+1
[ Upstream commit 1385ae5c30f238f81bc6528d897c6d7a0816783f ] All the buffers and registers are already set up appropriately for an MTU slightly above 1500, so we just need to expose this to the networking stack. AFAICT, there's no need to implement .ndo_change_mtu when the receive buffers are always set up to support the max_mtu. This fixes several warnings during boot on our mpc8309-board with an embedded mv88e6250 switch: mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0 ... mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4 ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead The last line explains what the DSA stack tries to do: achieving an MTU of 1500 on-the-wire requires that the master netdevice connected to the CPU port supports an MTU of 1500+the tagging overhead. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()Rasmus Villemoes1-1/+1
[ Upstream commit e925e0cd2a705aaacb0b907bb3691fcac3a973a4 ] ugeth is the netdiv_priv() part of the netdevice. Accessing the memory pointed to by ugeth (such as done by ucc_geth_memclean() and the two of_node_puts) after free_netdev() is thus use-after-free. Fixes: 80a9fad8e89a ("ucc_geth: fix module removal") Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30dpaa2-eth: fix the size of the mapped SGT bufferIoana Ciornei1-1/+1
[ Upstream commit 54a57d1c449275ee727154ac106ec1accae012e3 ] This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201211171607.108034-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-08dpaa2-mac: Add a missing of_node_put after of_device_is_availableChristophe JAILLET1-0/+1
Add an 'of_node_put()' call when a tested device node is not available. Fixes: 94ae899b2096 ("dpaa2-mac: add PCS support through the Lynx module") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201206151339.44306-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08enetc: Fix reporting of h/w packet countersClaudiu Manoil2-6/+14
Noticed some inconsistencies in packet statistics reporting. This patch adds the missing Tx packet counter registers to ethtool reporting and fixes the information strings for a few of them. Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201204171505.21389-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05ethernet: select CONFIG_CRC32 as neededArnd Bergmann2-0/+2
A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Acked-by: Mark Einon <mark.einon@gmail.com> Acked-by: Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02dpaa_eth: copy timestamp fields to new skb in A-050385 workaroundYangbo Lu1-1/+9
The timestamp fields should be copied to new skb too in A-050385 workaround for later TX timestamping handling. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25enetc: Let the hardware auto-advance the taprio base-time of 0Vladimir Oltean1-12/+2
The tc-taprio base time indicates the beginning of the tc-taprio schedule, which is cyclic by definition (where the length of the cycle in nanoseconds is called the cycle time). The base time is a 64-bit PTP time in the TAI domain. Logically, the base-time should be a future time. But that imposes some restrictions to user space, which has to retrieve the current PTP time from the NIC first, then calculate a base time that will still be larger than the base time by the time the kernel driver programs this value into the hardware. Actually ensuring that the programmed base time is in the future is still a problem even if the kernel alone deals with this. Luckily, the enetc hardware already advances a base-time that is in the past into a congruent time in the immediate future, according to the same formula that can be found in the software implementation of taprio (in taprio_get_start_time): /* Schedule the start time for the beginning of the next * cycle. */ n = div64_s64(ktime_sub_ns(now, base), cycle); *start = ktime_add_ns(base, (n + 1) * cycle); There's only one problem: the driver doesn't let the hardware do that. It interferes with the base-time passed from user space, by special-casing the situation when the base-time is zero, and replaces that with the current PTP time. This changes the intended effective base-time of the schedule, which will in the end have a different phase offset than if the base-time of 0.000000000 was to be advanced by an integer multiple of the cycle-time. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201124220259.3027991-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25dpaa2-eth: Fix compile error due to missing devlink supportEzequiel Garcia1-0/+1
The dpaa2 driver depends on devlink, so it should select NET_DEVLINK in order to fix compile errors, such as: drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.o: in function `dpaa2_eth_rx_err': dpaa2-eth.c:(.text+0x3cec): undefined reference to `devlink_trap_report' drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-devlink.o: in function `dpaa2_eth_dl_info_get': dpaa2-eth-devlink.c:(.text+0x160): undefined reference to `devlink_info_driver_name_put' Fixes: ceeb03ad8e22 ("dpaa2-eth: add basic devlink support") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201123163553.1666476-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21dpaa2-eth: select XGMAC_MDIO for MDIO bus supportIoana Ciornei1-0/+1
Explicitly enable the FSL_XGMAC_MDIO Kconfig option in order to have MDIO access to internal and external PHYs. Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201119145106.712761-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17enetc: Workaround for MDIO register access issueAlex Marginean4-25/+161
Due to a hardware issue, an access to MDIO registers that is concurrent with other ENETC register accesses may lead to the MDIO access being dropped or corrupted. The workaround introduces locking for all register accesses to the ENETC register space. To reduce performance impact, a readers-writers locking scheme has been implemented. The writer in this case is the MDIO access code (irrelevant whether that MDIO access is a register read or write), and the reader is any access code to non-MDIO ENETC registers. Also, the datapath functions acquire the read lock fewer times and use _hot accessors. All the rest of the code uses the _wa accessors which lock every register access. The commit introducing MDIO support is - commit ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") but due to subsequent refactoring this patch is applicable on top of a later commit. Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201112182608.26177-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: fec: Fix reference count leak in fec series opsZhang Qilong1-7/+5
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. If runtime of the device has error or device is in inaccessible state(or other error state), resume operation will fail. If we do not call put operation to decrease the reference, it will result in reference count leak. Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it by replacing it with pm_runtime_resume_and_get. Fixes: 8fff755e9f8d0 ("net: fec: Ensure clocks are enabled while using mdio bus") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06Merge tag 'net-5.10-rc3' of ↵Linus Torvalds4-34/+43
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc3, including fixes from wireless, can, and netfilter subtrees. Current merge window - bugs in new features: - can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Previous releases - regressions: - mac80211: - don't require VHT elements for HE on 2.4 GHz - fix regression where EAPOL frames were sent in plaintext - netfilter: - ipset: Update byte and packet counters regardless of whether they match - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if inner packet has IP_DF (don't fragment) set in its header (when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev) - net: fec: fix MDIO probing for some FEC hardware blocks - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso support - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platforms, sparse-related fix used the wrong integer size Previous releases - always broken: - netfilter: use actual socket sk rather than skb sk when routing harder - r8169: work around short packet hw bug on RTL8125 by padding frames - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement, the hardware does not support it - chelsio/chtls: fix always leaking ctrl_skb and another leak caused by a race condition - fix drivers incorrectly writing into skbs on TX: - cadence: force nonlinear buffers to be cloned - gianfar: Account for Tx PTP timestamp in the skb headroom - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP - can: flexcan: - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A - add ECC initialization for VF610 and LX2160A - flexcan_remove(): disable wakeup completely - can: fix packet echo functionality: - peak_canfd: fix echo management when loopback is on - make sure skbs are not freed in IRQ context in case they need to be dropped - always clone the skbs to make sure they have a reference on the socket, and prevent it from disappearing - fix real payload length return value for RTR frames - can: j1939: return failure on bind if netdev is down, rather than waiting indefinitely Misc: - IPv6: reply ICMP error if the first fragment don't include all headers to improve compliance with RFC 8200" * tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) ionic: check port ptr before use r8169: work around short packet hw bug on RTL8125 net: openvswitch: silence suspicious RCU usage warning chelsio/chtls: fix always leaking ctrl_skb chelsio/chtls: fix memory leaks caused by a race can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text ...
2020-11-02dpaa_eth: fix the RX headroom size alignmentCamelia Groza1-5/+9
The headroom reserved for received frames needs to be aligned to an RX specific value. There is currently a discrepancy between the values used in the Ethernet driver and the values passed to the FMan. Coincidentally, the resulting aligned values are identical. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02dpaa_eth: update the buffer layout for non-A050385 erratum scenariosCamelia Groza1-6/+10
Impose a larger RX private data area only when the A050385 erratum is present on the hardware. A smaller buffer size is sufficient in all other scenarios. This enables a wider range of linear Jumbo frame sizes in non-erratum scenarios, instead of turning to multi buffer Scatter/Gather frames. The maximum linear frame size is increased by 128 bytes for non-erratum arm64 platforms. Cleanup the hardware annotations header defines in the process. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-01Merge tag 'flexible-array-conversions-5.10-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more flexible-array member conversions from Gustavo A. R. Silva: "Replace zero-length arrays with flexible-array members" * tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: printk: ringbuffer: Replace zero-length array with flexible-array member net/smc: Replace zero-length array with flexible-array member net/mlx5: Replace zero-length array with flexible-array member mei: hw: Replace zero-length array with flexible-array member gve: Replace zero-length array with flexible-array member Bluetooth: btintel: Replace zero-length array with flexible-array member scsi: target: tcmu: Replace zero-length array with flexible-array member ima: Replace zero-length array with flexible-array member enetc: Replace zero-length array with flexible-array member fs: Replace zero-length array with flexible-array member Bluetooth: Replace zero-length array with flexible-array member params: Replace zero-length array with flexible-array member tracepoint: Replace zero-length array with flexible-array member platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
2020-10-30gianfar: Account for Tx PTP timestamp in the skb headroomClaudiu Manoil1-1/+1
When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on the second option, using skb_realloc_headroom() to create a new skb to accommodate PTP frames. Turns out that this method is not reliable, as reallocation of skbs for PTP frames along with the required overhead (skb_set_owner_w, consume_skb) is causing random crashes in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time on the same device (as seen in James' report). Note that these crashes don't occur with a single TCP stream, nor with multiple concurrent UDP streams, but only when multiple TCP streams are run concurrently with the PTP packet flow (doing skb reallocation). This patch enforces the first method, by requesting enough headroom from the stack to accommodate PTP frames, and so avoiding skb_realloc_headroom() & co, and the crashes no longer occur. There's no reason not to set needed_headroom to a large enough value to accommodate PTP frames, so in this regard this patch is a fix. Reported-by: James Jurack <james.jurack@ametek.com> Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30gianfar: Replace skb_realloc_headroom with skb_cow_head for PTPClaudiu Manoil1-10/+2
When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on skb_realloc_headroom() to create new skbs to accommodate PTP frames. Turns out that this method is not reliable in this context at least, as skb_realloc_headroom() for PTP frames can cause random crashes, mostly in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time with the PTP flow on the same device (as seen in James' report). I also noticed that when the system is loaded by sending multiple TCP streams, the driver receives cloned skbs in large numbers. skb_cow_head() instead proves to be stable in this scenario, and not only handles cloned skbs too but it's also more efficient and widely used in other drivers. The commit introducing skb_realloc_headroom in the driver goes back to 2009, commit 93c1285c5d92 ("gianfar: reallocate skb when headroom is not enough for fcb"). For practical purposes I'm referencing a newer commit (from 2012) that brings the code to its current structure (and fixes the PTP case). Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping") Reported-by: James Jurack <james.jurack@ametek.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30net: fec: fix MDIO probing for some FEC hardware blocksGreg Ungerer2-13/+22
Some (apparently older) versions of the FEC hardware block do not like the MMFR register being cleared to avoid generation of MII events at initialization time. The action of clearing this register results in no future MII events being generated at all on the problem block. This means the probing of the MDIO bus will find no PHYs. Create a quirk that can be checked at the FECs MII init time so that the right thing is done. The quirk is set as appropriate for the FEC hardware blocks that are known to need this. Fixes: f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Fugang Duan <fugand.duan@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Link: https://lore.kernel.org/r/20201028052232.1315167-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30enetc: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-24net: ucc_geth: Drop extraneous parentheses in comparisonMichael Ellerman1-1/+1
Clang warns about the extra parentheses in this comparison: drivers/net/ethernet/freescale/ucc_geth.c:1361:28: warning: equality comparison with extraneous parentheses if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ It seems clear the intent here is to do a comparison not an assignment, so drop the extra parentheses to avoid any confusion. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201023033236.3296988-1-mpe@ellerman.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+28
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()Marek Vasut1-2/+23
The phy_reset_after_clk_enable() is always called with ndev->phydev, however that pointer may be NULL even though the PHY device instance already exists and is sufficient to perform the PHY reset. This condition happens in fec_open(), where the clock must be enabled first, then the PHY must be reset, and then the PHY IDs can be read out of the PHY. If the PHY still is not bound to the MAC, but there is OF PHY node and a matching PHY device instance already, use the OF PHY node to obtain the PHY device instance, and then use that PHY device instance when triggering the PHY reset. Fixes: 1b0a83ac04e3 ("net: fec: add phy_reset_after_clk_enable() support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: David S. Miller <davem@davemloft.net> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Richard Leitner <richard.leitner@skidata.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11enetc: Migrate to PHYLINK and PCS_LYNXClaudiu Manoil7-166/+191
This is a methodical transition of the driver from phylib to phylink, following the guidelines from sfp-phylink.rst. The MAC register configurations based on interface mode were moved from the probing path to the mac_config() hook. MAC enable and disable commands (enabling Rx and Tx paths at MAC level) were also extracted and assigned to their corresponding phylink hooks. As part of the migration to phylink, the serdes configuration from the driver was offloaded to the PCS_LYNX module, introduced in commit 0da4c3d393e4 ("net: phy: add Lynx PCS module"), the PCS_LYNX module being a mandatory component required to make the enetc driver work with phylink. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Ioana Ciornei <ioana.cionei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11enetc: Clean up serdes configurationClaudiu Manoil1-53/+48
Decouple internal mdio bus creation from serdes configuration, as a prerequisite to offloading serdes configuration to a different module. Group together mdio bus creation routines, cleanup. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11enetc: Clean up MAC and link configurationClaudiu Manoil1-48/+67
Decouple level MAC configuration based on phy interface type from general port configuration. Group together MAC and link configuration code. Decouple external mdio bus creation from interface type parsing. No longer return an (unhandled) error code when phy_node not found, use phy_node to indicate whether the port has a phy or not. No longer fall-through when serdes configuration fails for the link modes that require internal link configuration. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10dpaa_eth: enable NETIF_MSG_HW by defaultMaxim Kochetkov1-1/+1
When packets are received on the error queue, this function under net_ratelimit(): netif_err(priv, hw, net_dev, "Err FD status = 0x%08x\n"); does not get printed. Instead we only see: [ 3658.845592] net_ratelimit: 244 callbacks suppressed [ 3663.969535] net_ratelimit: 230 callbacks suppressed [ 3669.085478] net_ratelimit: 228 callbacks suppressed Enabling NETIF_MSG_HW fixes this issue, and we can see some information about the frame descriptors of packets. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net: fec: Fix PHY init after phy_reset_after_clk_enable()Marek Vasut1-5/+5
The phy_reset_after_clk_enable() does a PHY reset, which means the PHY loses its register settings. The fec_enet_mii_probe() starts the PHY and does the necessary calls to configure the PHY via PHY framework, and loads the correct register settings into the PHY. Therefore, fec_enet_mii_probe() should be called only after the PHY has been reset, not before as it is now. Fixes: 1b0a83ac04e3 ("net: fec: add phy_reset_after_clk_enable() support") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: David S. Miller <davem@davemloft.net> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+4
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03dpaa2-eth: add support for devlink parser error drop trapsIoana Ciornei3-1/+385
Add support for the new group of devlink traps - PARSER_ERROR_DROPS. This consists of registering the array of parser error drops supported, controlling their action through the .trap_group_action_set() callback and reporting an erroneous skb received on the error queue appropriately. DPAA2 devices do not support controlling the action of independent parser error traps, thus the .trap_action_set() callback just returns an EOPNOTSUPP while .trap_group_action_set() actually notifies the hardware what it should do with a frame marked as having a header error. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03dpaa2-eth: add basic devlink supportIoana Ciornei4-1/+119
Add basic support in dpaa2-eth for devlink. For the moment, just register the device with devlink, add the corresponding devlink port and implement the .info_get() callback. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30net: fec_mpc52xx: Replace in_interrupt() usageSebastian Andrzej Siewior1-5/+5
The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. mpc52xx_fec_stop() uses in_interrupt() to check if it is safe to sleep. All callers run in well defined contexts. Pass an argument from the callers indicating whether it is safe to sleep. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26dpaa2-mac: Fix potential null pointer dereferenceGustavo A. R. Silva1-1/+1
There is a null-check for _pcs_, but it is being dereferenced prior to this null-check. So, if _pcs_ can actually be null, then there is a potential null pointer dereference that should be fixed by null-checking _pcs_ before being dereferenced. Addresses-Coverity-ID: 1497159 ("Dereference before null check") Fixes: 94ae899b2096 ("dpaa2-mac: add PCS support through the Lynx module") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26dpaa2-eth: install a single steering rule when SHARED_FS is enabledIonut-robert Aron3-1/+17
When SHARED_FS is enabled on a DPNI object the flow steering tables are shared between all the traffic classes. Modify the driver so that we only add a new flow steering entry on the TC#0 when this new option is enabled. Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26dpaa2-eth: no need to check link state right after ndo_openIoana Ciornei1-12/+1
The call to dpaa2_eth_link_state_update() is a leftover from the time when on DPAA2 platforms the PHYs were started at boot time so when an ifconfig was issued on the associated interface, the link status needed to be checked directly from the ndo_open() callback. This is not needed anymore since we are now properly integrated with the PHY layer thus a link interrupt will come directly from the PHY eventually without the need to call the sync function. Fix this up by removing the call to dpaa2_eth_link_state_update(). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26dpaa2-mac: do not check for both child and parent DTS nodesIoana Ciornei1-2/+1
There is no need to check if both the MDIO controller node and its child node, the PCS device, are available since there is no chance that the child node would be enabled when the parent it's not. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26dpaa2-eth: fix command version for Tx shapingIoana Ciornei1-1/+3
When adding the support for TBF offload, the improper command version was added even though the command format is for the V2 of dpni_set_tx_shaping(). This does not affect the functionality of TBF since the only change between these two versions is the addition of the exceeded parameters which are not used in TBF. Still, fix the bug so that we keep things in sync. Fixes: 39344a89623d ("dpaa2-eth: add API for Tx shaping") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg6-25/+29
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net/fsl: quieten expected MDIO access failuresJamie Iles1-1/+1
MDIO reads can happen during PHY probing, and printing an error with dev_err can result in a large number of error messages during device probe. On a platform with a serial console this can result in excessively long boot times in a way that looks like an infinite loop when multiple busses are present. Since 0f183fd151c (net/fsl: enable extended scanning in xgmac_mdio) we perform more scanning so there are potentially more failures. Reduce the logging level to dev_dbg which is consistent with the Freescale enetc driver. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 06:29:02 +0300