summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/emulex/benet/be_cmds.c
AgeCommit message (Collapse)AuthorFilesLines
2013-11-04be2net: pass if_id for v1 and V2 versions of TX_CREATE cmdVasundhara Volam1-1/+2
[ Upstream commit 0fb88d61bc60779dde88b0fc268da17eb81d0412 ] It is a required field for all TX_CREATE cmd versions > 0. This fixes a driver initialization failure, caused by recent SH-R Firmwares (versions > 10.0.639.0) failing the TX_CREATE cmd when if_id field is not passed. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-31be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hookSomnath Kotur1-3/+3
During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-24be2net: bug fix on returning an invalid nic descriptorWei Yang1-9/+4
In function be_get_nic_desc(), it will go through the descriptor array returned from f/w. By comparing the desc_type field, it determines whether there is a nic descriptor in the array or not. In the case of no nic descriptor, this function should return NULL. The code may return an invalide descriptor, when there is no nic descriptor in the array and the desc_count is less than MAX_RESOURCE_DESC. In this case, even there is no nic descriptor, it will still return the lase descriptor since the i doesn't equal to MAX_RESOURCE_DESC. This patch fix this issue by returning the descriptor when find it and return NULL for other cases. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08be2net: fix payload_len value for GET_MAC_LIST cmd reqSathya Perla1-3/+2
The buffer size for a FW cmd request must be big enough to fit the response, else the cmd fails. For GET_MAC_LIST cmd, though the memory allocated for the cmd is big enough to fit the response, the payload_len value in the WRB hdr is being set to the request length only. Fix this for GET_MAC_LIST cmd. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03be2net: Fix firmware download for LancerSomnath Kotur1-1/+1
Increasing the timeout value of write_object command to 60 seconds as 30 second timeout was found to be not enough for the command to complete. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03be2net: Fix to receive Multicast Packets when Promiscuous mode is enabled on ↵Ajit Khaparde1-2/+4
certain devices When a user requests Promiscuous mode on SkyHawk-R devices, the FW enables Desparate Promiscuous mode. Due to this, we need to explicitly enable Multicast Promiscuous mode so that Multicast packets are received as well. This patch fixes that. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03be2net: Fix to use version 2 of cq_create for SkyHawk-R devicesAjit Khaparde1-13/+14
SkyHawk-R devices should use v2 of cq_create command. BE3/BE2 devices can use version 0 of the command to create a CQ. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-16/+54
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/net/ethernet/emulex/benet/be.h include/net/tcp.h net/mac802154/mac802154.h Most conflicts were minor overlapping stuff. The be2net driver brought in some fixes that added __vlan_put_tag calls, which in net-next take an additional argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29be2net: Use GET_FUNCTION_CONFIG V1 cmdKalesh AP1-1/+4
Skyhawk-R requires V1 version of GET_FUNCTION_CONFIG cmd to be used for querrying resources available per function. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29be2net: Fixed memory leakSuresh Reddy1-16/+22
Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-27be2net: Add support for setting and getting rx flow hash optionsSuresh Reddy1-8/+5
Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25be2net: fix a Tx stall bug caused by a specific ipv6 packetAjit Khaparde1-0/+32
The ASIC could lockup in the transmit path when it tries to insert VLAN in a specific ipv6 packet. 1) Identify the packet which can cause this. 2) Check if the firmware provides a workaround to prevent this. 3) If workaround is not present, drop the packet. 4) If the firmware provides a workaround, insert the VLAN tag in the packet and inform the firmware to skip further VLAN insertions. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22be2net: Use GET_PROFILE_CONFIG V1 cmd for BE3-RVasundhara Volam1-21/+74
Use GET_PROFILE_CONFIG_V1 cmd for BE3-R, to query the maximum number of TX rings available per function. On SH-R the same is queried via the GET_FUNCTION_CONFIG cmd. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22be2net: Avoid flashing BE3 UFI on BE3-R chip.Vasundhara Volam1-1/+2
Avoid flashing BE3 UFI on BE3-R chip by verifying asic_revision number of the chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22be2net: Don't log "Out of MCCQ wrbs" errorVasundhara Volam1-3/+1
Don't log "Out of MCCQ wrbs" msg. When the driver doesn't receive any response from the FW it already logs a "FW not responding" message. The driver runs out of MCCQ wrbs much later. Also, this message can swamp the kernel log in HW/FW error scenarios. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22be2net: Use TXQ_CREATE_V2 cmdVasundhara Volam1-16/+18
Skyhawk-R and BE3-R (SuperNIC profile) require V2 version of TXQ_CREATE cmd to be used. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12be2net: remove unused variable 'sge'Ivan Vecera1-2/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches1-3/+1
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15be2net: Use new F/W mailbox cmd to manipulate interrupts.Somnath Kotur1-0/+25
This is needed as the earlier method of manipulating this register via PCI Config space is disallowed by certain Hypervisors. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-20/+16
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08be2net: Update copyright yearVasundhara Volam1-1/+1
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3Sathya Perla1-6/+9
The SLIPORT_SEMAPHORE register shadowed in the config-space may not reflect the correct POST stage after an EEH reset in BE2/3; it may return FW_READY state even though FW is not ready. This causes the driver to prematurely poll the FW mailbox and fail. For BE2/3 use the CSR-BAR/0xac instead. Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06benet: Wait f/w POST until timeoutGavin Shan1-17/+10
While PCI card faces EEH errors, reset (usually hot reset) is expected to recover from the EEH errors. After EEH core finishes the reset, the driver callback (be_eeh_reset) is called and wait the firmware to complete POST successfully. The original code would return with error once detecting failure during POST stage. That seems not enough. The patch forces the driver (be_eeh_reset) to wait the firmware completes POST until timeout, instead of returning error upon detection POST failure immediately. Also, it would improve the reliability of the EEH funtionality of the driver. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13be2net: remove BUG_ON() in be_mcc_compl_is_new()Sathya Perla1-5/+8
The current code expects that the last word (with valid bit) of an MCC compl is DMAed in one shot. This may not be the case. Remove this assertion. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04be2net: fix re-loaded PF driver to re-gain control of its VFsSathya Perla1-0/+33
Currently, when the PF driver is unloaded and re-loaded while VFs are attached to VMs, it loses control of its VFs. The PF driver now uses the newly defined/created GET_IFACE_LIST cmd (available in FW ver >= 4.6) to query the if_id of the VFs (enabled in its previous life). The PF driver then uses the if_id for further VF configuration. The GET_IFACE_MAC_LIST cmd has also implemented in BE3 FW for PF to query pmac-ids used by its VFs. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19be2net: fix be_close() to ensure all events are ack'edSathya Perla1-0/+5
In be_close(), be_eq_clean() must be called after all RX/TX/MCC queues have been cleaned to ensure that any events caused while cleaning up completions are notified/acked. Not clearing all events can cause upredictable behaviour when RX rings are re-created in the subsequent be_open(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: fix access to SEMAPHORE regSathya Perla1-6/+5
The SEMAPHORE register was being accessed from the csr BAR space. This BAR may not be available in some Skyhawk-R configurations. Instead, access this register via the PCI config space (it's available there too). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08be2net: fix wrong usage of adapter->generationSathya Perla1-2/+4
adapter->generation was being incorrectly set as BE_GEN3 for Skyhawk-R. Replace generation usage with XXX_chip() macros to identify the chip. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23be2net: Fix smatch warnings in be_main.cPadmanabh Ratnakar1-3/+4
FW flashing code, even though it works correctly, makes some hidden assumptions about buffer sizes. This is causing code analysers to report error. Cleanup FW flashing code to remove these hidden assumptions. Reported-by: Yuanhan Liu <yuanhan.liu@intel.com> Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22be2net: Fix VF driver load on newer Lancer FWPadmanabh Ratnakar1-0/+32
PF driver should enable VF so that VF goes to ready state in new Lancer FW. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22be2net: Fix issues in error recovery due to wrong queue statePadmanabh Ratnakar1-4/+5
During recovery from a FW error, destroy queue operation may fail. Queue should be marked as destroyed so that recovery code can recreate the queue. Also fix queue created state not getting checked at one instance. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22be2net: Fix error messages while driver load for VFsPadmanabh Ratnakar1-0/+105
VF does not have privileges to execute many commands. When VFs try to execute those commands there are unnecessary error messages. Fix this by executing only those commands for which VF has privilege. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22be2net: Wait till resources are available for VF in error recoveryPadmanabh Ratnakar1-0/+31
After FW error, driver should wait for NO_RESOURCE error to disappear before proceeding with recovery. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22be2net: Fix setting QoS for VF for LancerPadmanabh Ratnakar1-0/+58
Use Lancer specific command to set QoS for VF. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22be2net: Fix driver load failure for different FW configs in LancerPadmanabh Ratnakar1-3/+147
Driver assumes FW resource counts and capabilities while creating queues and using functionality like RSS. This causes driver load to fail in FW configs where resources and capabilities are reduced. Fix this by querying FW configuration during probe and using resources and capabilities accordingly. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: fixup log messagesSathya Perla1-0/+3
Added and modified a few log messages mostly in probe path. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: cleanup code related to be_link_status_query()Sathya Perla1-13/+33
1) link_status_query() is always called to query the link-speed (speed after applying qos). When there is no qos setting, link-speed is derived from port-speed. Do all this inside this routine and hide this from the callers. 2) adpater->phy.forced_port_speed is not being set anywhere after being initialized. Get rid of this variable. 3) Ignore async link_speed notifications till the initial value has been fetched from FW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: remove type argument of be_cmd_mac_addr_query()Sathya Perla1-2/+2
All invocations of this routine use the same type value. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+4
Merge the 'net' tree to get the recent set of netfilter bug fixes in order to assist with some merge hassles Pablo is going to have to deal with for upcoming changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30be2net: modify log msg for lack of privilege errorVasundhara Volam1-1/+1
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-29netpoll: revert 6bdb7fe3104 and fix be_poll() insteadAmerigo Wang1-2/+4
Against -net. In the patch "netpoll: re-enable irq in poll_napi()", I tried to fix the following warning: [100718.051041] ------------[ cut here ]------------ [100718.051048] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x7d/0xb0() (Not tainted) [100718.051049] Hardware name: ProLiant BL460c G7 ... [100718.051068] Call Trace: [100718.051073] [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 [100718.051075] [<ffffffff8106b79a>] ? warn_slowpath_null+0x1a/0x20 [100718.051077] [<ffffffff810747ed>] ? local_bh_enable_ip+0x7d/0xb0 [100718.051080] [<ffffffff8150041b>] ? _spin_unlock_bh+0x1b/0x20 [100718.051085] [<ffffffffa00ee974>] ? be_process_mcc+0x74/0x230 [be2net] [100718.051088] [<ffffffffa00ea68c>] ? be_poll_tx_mcc+0x16c/0x290 [be2net] [100718.051090] [<ffffffff8144fe76>] ? netpoll_poll_dev+0xd6/0x490 [100718.051095] [<ffffffffa01d24a5>] ? bond_poll_controller+0x75/0x80 [bonding] [100718.051097] [<ffffffff8144fde5>] ? netpoll_poll_dev+0x45/0x490 [100718.051100] [<ffffffff81161b19>] ? ksize+0x19/0x80 [100718.051102] [<ffffffff81450437>] ? netpoll_send_skb_on_dev+0x157/0x240 by reenabling IRQ before calling ->poll, but it seems more problems are introduced after that patch: http://ozlabs.org/~akpm/stuff/IMG_20120824_122054.jpg http://marc.info/?l=linux-netdev&m=134563282530588&w=2 So it is safe to fix be2net driver code directly. This patch reverts the offending commit and fixes be_poll() by avoid disabling BH there, this is okay because be_poll() can be called either by poll_napi() which already disables IRQ, or by net_rx_action() which already disables BH. Reported-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Sylvain Munaut <s.munaut@whatever-company.com> Cc: Sylvain Munaut <s.munaut@whatever-company.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Cong Wang <amwang@redhat.com> Tested-by: Sylvain Munaut <s.munaut@whatever-company.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18be2net: Ignore physical link async event for LancerPadmanabh Ratnakar1-0/+5
The ability of driver to transmit packets depends on logical state of the link. Ignore physical link status. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18be2net: Fix VF driver load for LancerPadmanabh Ratnakar1-1/+2
Lancer FW has added new capability checks for VFs. Driver should only use those capabilities which are allowed for VFs. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Enable RSS UDP hashing for Lancer and SkyhawkPadmanabh Ratnakar1-0/+7
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Fix port name in message during driver loadPadmanabh Ratnakar1-0/+38
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Activate new FW after FW download for LancerPadmanabh Ratnakar1-5/+8
After FW download, activate new FW by invoking FW reset. Recreate rings once new FW is operational. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net: Fix initialization sequence for LancerPadmanabh Ratnakar1-1/+75
Invoke only required initialization routines for Lancer. Remove invocation of unnecessary routines. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12be2net : Fix die temperature stat for LancerPadmanabh Ratnakar1-7/+1
Query die temperature stat for Lancer to report it correctly in ethtool. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+6
Conflicts: drivers/net/usb/qmi_wwan.c net/batman-adv/translation-table.c net/ipv6/route.c qmi_wwan.c resolution provided by Bjørn Mork. batman-adv conflict is dealing merely with the changes of global function names to have a proper subsystem prefix. ipv6's route.c conflict is merely two side-by-side additions of network namespace methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-18be2net: Modify error message to incorporate subsystemVasundhara Volam1-6/+6
Modify IOCTL error message to print subsystem also. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-13 01:21:48 +0300