summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cisco/enic/enic_main.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-02net: move skb->xmit_more hint to softnet dataFlorian Westphal1-1/+1
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07enic: fix build warning without CONFIG_CPUMASK_OFFSTACKArnd Bergmann1-3/+3
The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02enic: fix checksum validation for IPv6Govindarajulu Varadarajan1-1/+2
In case of IPv6 pkts, ipv4_csum_ok is 0. Because of this, driver does not set skb->ip_summed. So IPv6 rx checksum is not offloaded. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01enic: do not call enic_change_mtu in enic_probeGovindarajulu Varadarajan1-1/+1
In commit ab123fe071c9 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29enic: handle mtu change for vf properlyGovindarajulu Varadarajan1-51/+27
When driver gets notification for mtu change, driver does not handle it for all RQs. It handles only RQ[0]. Fix is to use enic_change_mtu() interface to change mtu for vf. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20enic: do not overwrite error codeGovindarajulu Varadarajan1-5/+4
In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e268509 ("enic: enable rq before updating rq descriptors") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20enic: initialize enic->rfs_h.lock in enic_probeGovindarajulu Varadarajan1-1/+2
lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06enic: fix UDP rss bitsGovindarajulu Varadarajan1-6/+14
In commit 48398b6e7065 ("enic: set UDP rss flag") driver needed to set a single bit to enable UDP rss. This is changed to two bit. One for UDP IPv4 and other bit for UDP IPv6. The hardware which supports this is not released yet. When released, driver should set 2 bit to enable UDP rss for both IPv4 and IPv6. Also add spinlock around vnic_dev_capable_rss_hash_type(). Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25enic: set DMA mask to 47 bitGovindarajulu Varadarajan1-4/+4
In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16enic: drop IP proto check for vxlan tunnel deleteGovindarajulu Varadarajan1-3/+2
Commit d11790941dd3 ("enic: Add vxlan offload support for IPv6 pkts") added vxlan offload support for IPv6 pkts. Required change in enic_udp_tunnel_del was not made. This creates a bug where once user adds IPv6 tunnel, hw offload for that cannot be deleted. This patch removes check for IP proto in tunnel delete path. Driver need not check for IP proto since same UDP port cannot be used to create two tunnels. Fixes: d11790941dd3 ("enic: Add vxlan offload support for IPv6 pkts") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05enic: set IG desc cache flag in openGovindarajulu Varadarajan1-1/+2
New adapter needs CMD_OPENF_IG_DESCCACHE flag to be set. If this flag is not set, fw flushes the global IG desc cache. This flag is nop in older adapter. Also increment driver version Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05enic: enable rq before updating rq descriptorsGovindarajulu Varadarajan1-3/+7
rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05enic: set UDP rss flagGovindarajulu Varadarajan1-1/+3
New hardware needs UDP flag set to enable UDP L4 rss hash. Add ethtool get option to display supported rss flow hash. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05enic: Check if hw supports multi wq with vxlan offloadGovindarajulu Varadarajan1-0/+5
Some adaptors do not support vxlan offload when multi wq is configured. If hw supports multi wq, BIT(2) is set in a1. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05enic: Add vxlan offload support for IPv6 pktsGovindarajulu Varadarajan1-9/+35
New adaptors supports vxlan offload for inner IPv6 and outer IPv6 vxlan pkts. Fw sets BIT(0) & BIT(1) in a1 if hw supports ipv6 inner & outer pkt offload. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05enic: Check inner ip proto for pseudo header csumGovindarajulu Varadarajan1-1/+14
To compute pseudo IP header csum, we need to check the inner header for encap pkt, not outer IP header. Also add pseudo csum for IPv6 inner pkt. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26enic: add wq clean up budgetGovindarajulu Varadarajan1-2/+2
In case of tx clean up, we set '-1' as budget. This means clean up until wq is empty or till (1 << 32) pkts are cleaned. Under heavy load this will run for long time and cause "watchdog: BUG: soft lockup - CPU#25 stuck for 21s!" warning. This patch sets wq clean up budget to 256. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03enic: add sw timestamp supportGovindarajulu Varadarajan1-0/+1
Add ethtool ops to advertise sw timestamping. Call skb_tx_timestamp() just before ringing the wq doorbell. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-22treewide: setup_timer() -> timer_setup()Kees Cook1-4/+3
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-21drivers: net: enic: use setup_timer() helper.Allen Pais1-3/+2
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20enic: Fix format truncation warningGovindarajulu Varadarajan1-4/+4
With -Wformat-truncation, gcc throws the following warning. Fix this by increasing the size of devname to accommodate 15 character netdev interface name and description. Remove length format precision for %s. We can fit entire name. Also increment the version. drivers/net/ethernet/cisco/enic/enic_main.c: In function ‘enic_open’: drivers/net/ethernet/cisco/enic/enic_main.c:1740:15: warning: ‘%u’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 12 [-Wformat-truncation=] "%.11s-rx-%u", netdev->name, i); ^~ drivers/net/ethernet/cisco/enic/enic_main.c:1740:5: note: directive argument in the range [0, 16] "%.11s-rx-%u", netdev->name, i); ^~~~~~~~~~~~~ drivers/net/ethernet/cisco/enic/enic_main.c:1738:4: note: ‘snprintf’ output between 6 and 18 bytes into a destination of size 16 snprintf(enic->msix[intr].devname, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(enic->msix[intr].devname), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%.11s-rx-%u", netdev->name, i); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23enic: unmask intr only when napi is completeGovindarajulu Varadarajan1-4/+2
In case of busy poll, napi_complete_done returns false and does not dequeue napi. In this case do not unmask the intr. We are guaranteed napi is called again. This reduces unnecessary iowrites. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10enic: add vxlan offload on tx pathGovindarajulu Varadarajan1-12/+114
Define ndo_features_check. Hw supports offload only for ipv4 inner and ipv4 outer pkt. Code refactor for setting inner tcp pseudo csum. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10enic: add udp_tunnel ndo for vxlan offloadGovindarajulu Varadarajan1-3/+153
Defines enic_udp_tunnel_add/del for configuring vxlan tunnel offload. enic supports offload of only one ipv4/udp port. There are two modes that fw supports for vxlan offload. mode 0: fcoe bit is set for encapsulated packet. fcoe_fc_crc_ok is set if checksum of csum is ok. This bit is or of ip_csum_ok and tcp_udp_csum_ok mode 2: BIT(0) in rss_hash is set if it is encapsulated packet. BIT(1) is set if outer_ip_csum_ok/ BIT(2) is set if outer_tcp_csum_ok tcp_udp_csum_ok/ipv4_csum_ok is set if inner csum is OK. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04enic: Remove local ndo_busy_poll() implementation.David S. Miller1-61/+5
We do polling generically these days. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-2/+2
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: make ndo_get_stats64 a void functionstephen hemminger1-5/+3
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-02enic: set skb->hash type properlyGovindarajulu Varadarajan1-6/+12
Driver sets the skb l4/l3 hash based on NIC_CFG_RSS_HASH_TYPE_*, which is bit mask. This is wrong. Hw actually provides us enum. Use CQ_ENET_RQ_DESC_RSS_TYPE_* to set l3 and l4 hash type. Fixes: bf751ba802fe ("driver/net: enic: record q_number and rss_hash for skb") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson1-3/+4
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: enic: use correct type specifierxypron.glpk@gmx.de1-2/+2
i is defined as unsigned. So print it with %u. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18enic: set netdev->vlan_featuresGovindarajulu Varadarajan1-0/+1
Driver sets vlan_feature to netdev->features as hardware supports all of them on vlan interface. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-19net: provide generic busy polling to all NAPI driversEric Dumazet1-2/+0
NAPI drivers no longer need to observe a particular protocol to benefit from busy polling (CONFIG_NET_RX_BUSY_POLL=y) napi_hash_add() and napi_hash_del() are automatically called from core networking stack, respectively from netif_napi_add() and netif_napi_del() This patch depends on free_netdev() and netif_napi_del() being called from process context, which seems to be the norm. Drivers might still prefer to call napi_hash_del() on their own, since they might combine all the rcu grace periods into a single one, knowing their NAPI structures lifetime, while core networking stack has no idea of a possible combining. Once this patch proves to not bring serious regressions, we will cleanup drivers to either remove napi_hash_del() or provide appropriate rcu grace periods combining. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02enic: assign affinity hint to interruptsGovindarajulu Varadarajan1-0/+72
The affinity hint is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. This patch sets the irq affinity hint to local numa core first, when exausted we try non-local numa cores. Also set tx xps cpus mask bassed on affinity hint. v2: remove the global affinity policy. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: do hang reset only in case of tx timeoutGovindarajulu Varadarajan1-1/+35
The current code invokes hang reset in case of error interrupt. We should hang reset only in case of tx timeout. This because of the way hang reset is implemented in firmware. Hang reset takes more firmware resources than soft reset. Adaptor does not generate error interrupt in case of tx timeout. Hang reset only in case of tx timeout, in .ndo_tx_timeout. Do soft reset otherwise. Introduce deferred work, enic_tx_hang_reset, to do hang reset. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: handle spurious error interruptGovindarajulu Varadarajan1-5/+9
Some of the enic adaptors are know to generate spurious interrupts. When error interrupt is generated, driver just resets the device. This patch resets the device only when an error is occurred. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21enic: Fix build failure with SRIOV disabled.David S. Miller1-1/+1
err_out_vnic_unregister is used regardless of whether SRIOV is enabled or not. Reported-by: Jesse Brandeburg <jesse.brangeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18enic: add devcmd2Govindarajulu Varadarajan1-0/+5
devcmd is an interface for driver to communicate with fw/adaptor. It involves writing data to hardware registers and waiting for the result. This mechanism does not scale well. The queuing of "no wait" devcmds is done in firmware memory rather than on the host. Firmware memory is a rather more scarce and valuable resource than host memory. A devcmd storm from one vf can disrupt the service on other pf/vf. The lack of flow control allows for possible denial of server from one VM to another. Devcmd2 uses work queue to post the devcmds, just like tx work queue. This allows better flow control. Initialize devcmd2, if fails we fall back to devcmd1. Also change the driver version. Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20enic: add adaptive coalescing intr for intx and msi pollGovindarajulu Varadarajan1-68/+67
Adaptive interrupt coalescing is available for msix. This patch adds the support for msi poll. Interface for adaptive interrupt coalescing is already added in driver. We just did not enable it for legacy intr & msi. enic_calc_int_moderation() & enic_set_int_moderation() are defined as static after enic_poll. Since enic_poll needs it, move both of these function definitions above enic_poll. No change in functionality. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-02enic: fix issues in enic_pollGovindarajulu Varadarajan1-2/+2
In enic_poll, we clean tx and rx queues, when low latency busy socket polling is happening, enic_poll will only clean tx queue. After cleaning tx, it should return total budget for re-poll. There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and fails. Unlock napi_poll before unmasking the interrupt. v2: Do not change tx wonk done behaviour. Consider only rx work done for completing napi. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25enic: use atomic_t instead of spin_lock in busy pollGovindarajulu Varadarajan1-2/+2
We use spinlock to access a single flag. We can avoid spin_locks by using atomic variable and atomic_cmpxchg(). Use atomic_cmpxchg to set the flag for idle to poll. And a simple atomic_set to unlock (set idle from poll). In napi poll, if gro is enabled, we call napi_gro_receive() to deliver the packets. Before we call napi_complete(), i.e while re-polling, if low latency busy poll is called, we use netif_receive_skb() to deliver the packets. At this point if there are some skb's held in GRO, busy poll could deliver the packets out of order. So we call napi_gro_flush() to flush skbs before we move the napi poll to idle. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11enic: check return value for stat dumpGovindarajulu Varadarajan1-1/+8
We do not check the return value of enic_dev_stats_dump(). If allocation fails, we will hit NULL pointer reference. Return only if memory allocation fails. For other failures, we return the previously recorded values. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11enic: unlock napi busy poll before unmasking intrGovindarajulu Varadarajan1-1/+1
There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and hits the following WARN_ON message. Fix is to unlock napi_poll before unmasking the interrupt. [ 781.121746] ------------[ cut here ]------------ [ 781.121789] WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/cisco/enic/vnic_rq.h:228 enic_poll_msix_rq+0x36a/0x3c0 [enic]() [ 781.121834] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel mgag200 ttm drm_kms_helper joydev aes_x86_64 lrw drm gf128mul mousedev glue_helper sb_edac ablk_helper iTCO_wdt iTCO_vendor_support evdev ipmi_si syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core edac_core lpc_ich mac_hid cryptd pcspkr ipmi_msghandler shpchp tpm_tis acpi_power_meter tpm wmi processor hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache hid_generic usbhid hid ehci_pci ehci_hcd sd_mod megaraid_sas usbcore scsi_mod usb_common enic crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 781.122176] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc6-ARCH-00040-gc46a024-dirty #106 [ 781.122210] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 781.122252] 0000000000000000 bddbbc9d655ec96e ffff880277e43da8 ffffffff81583fe8 [ 781.122286] 0000000000000000 0000000000000000 ffff880277e43de8 ffffffff8107acfa [ 781.122319] ffff880272c01000 ffff880273f18000 ffff880273f1a100 0000000000000000 [ 781.122352] Call Trace: [ 781.122364] <IRQ> [<ffffffff81583fe8>] dump_stack+0x4f/0x7b [ 781.122399] [<ffffffff8107acfa>] warn_slowpath_common+0x8a/0xc0 [ 781.122425] [<ffffffff8107ae2a>] warn_slowpath_null+0x1a/0x20 [ 781.122455] [<ffffffffa01fa9ca>] enic_poll_msix_rq+0x36a/0x3c0 [enic] [ 781.122487] [<ffffffff8148525a>] net_rx_action+0x22a/0x370 [ 781.122512] [<ffffffff8107ed3d>] __do_softirq+0xed/0x2d0 [ 781.122537] [<ffffffff8107f06e>] irq_exit+0x7e/0xa0 [ 781.122560] [<ffffffff8158c424>] do_IRQ+0x64/0x100 [ 781.122582] [<ffffffff8158a42e>] common_interrupt+0x6e/0x6e [ 781.122605] <EOI> [<ffffffff810bd331>] ? cpu_startup_entry+0x121/0x480 [ 781.122638] [<ffffffff810bd2fc>] ? cpu_startup_entry+0xec/0x480 [ 781.122667] [<ffffffff810f2ed3>] ? clockevents_register_device+0x113/0x1f0 [ 781.122698] [<ffffffff81050ab6>] start_secondary+0x196/0x1e0 [ 781.122723] ---[ end trace cec2e9dd3af7b9db ]--- Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04ethernet: Use eth_<foo>_addr instead of memsetJoe Perches1-4/+4
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27enic: do notify_check before returning creditsSujith Sankar1-2/+2
We should complete notify_check before returning the credits. Once we return the credits, adaptor may access the notify data. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06enic: enic_main: fix sparse warningsLad, Prabhakar1-3/+3
this patch fixes following sparse warnings: enic_main.c:92:28: warning: symbol 'mod_table' was not declared. Should it be static? enic_main.c:109:28: warning: symbol 'mod_range' was not declared. Should it be static? enic_main.c:1306:5: warning: symbol 'enic_busy_poll' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25enic: fix rx napi poll return valueGovindarajulu Varadarajan1-1/+1
With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When we are in busy_poll we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-2/+2
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+4
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-13 01:35:31 +0300