summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cisco/enic/enic_ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-20enic: allow adaptive coalesce setting for msi/legacy intrGovindarajulu Varadarajan1-48/+65
* Allow setting of adaptive coalescing setting for all types of interrupt. * In msi & legacy intr, we use single interrupt for rx & tx. In this case tx_coalesce_usecs is invalid. We should use only rx_coalesce_usecs. Do not display tx_coal values for msi/intx. And do not allow user to set this as well. * Driver supports only tx/rx_coalesce_usec and adaptive coalesce settings. For other values, driver does not return error. So ethtool succeeds for unsupported values. Introduce enic_coalesce_valid() function to validate the coalescing values. * If user requests for coalesce value greater than what adaptor supports, driver uses the max value. We should at least log this. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+17
2015-06-11enic: check return value for stat dumpGovindarajulu Varadarajan1-3/+17
We do not check the return value of enic_dev_stats_dump(). If allocation fails, we will hit NULL pointer reference. Return only if memory allocation fails. For other failures, we return the previously recorded values. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05net: Add full IPv6 addresses to flow_keysTom Herbert1-2/+2
This patch adds full IPv6 addresses into flow_keys and uses them as input to the flow hash function. The implementation supports either IPv4 or IPv6 addresses in a union, and selector is used to determine how may words to input to jhash2. We also add flow_get_u32_dst and flow_get_u32_src functions which are used to get a u32 representation of the source and destination addresses. For IPv6, ipv6_addr_hash is called. These functions retain getting the legacy values of src and dst in flow_keys. With this patch, Ethertype and IP protocol are now included in the flow hash input. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13flow_dissector: change port array into src, dst tupleJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13flow_dissect: use programable dissector in skb_flow_dissect and friendsJiri Pirko1-5/+5
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06enic: enic_ethtool: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: enic_ethtool.c:95:6: warning: symbol 'enic_intr_coal_set_rx' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: add stats for dma mapping errorGovindarajulu Varadarajan1-1/+18
This patch adds generic statistics for enic. As of now dma_map_error is the only member. dma_map_erro is incremented every time dma maping error happens. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10enic: add support for set/get rss hash keyGovindarajulu Varadarajan1-0/+38
This patch adds support for setting/getting rss hash key using ethtool. v2: respin patch to support RSS hash function changes. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05enic: Add tunable_ops support for rx_copybreakGovindarajulu Varadarajan1-0/+39
This patch adds support for setting/getting rx_copybreak using generic ethtool tunable. Defines enic_get_tunable() & enic_set_tunable() to get/set rx_copybreak. As of now, these two function supports only rx_copybreak. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22enic: Add ethtool support to show classifier filters added by the driverGovindarajulu Varadarajan1-0/+98
This patch impliments ethtool_ops->get_rxnfc() to display the classifier filter added by the driver. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08enic: fix return values in enic_set_coalesceGovindarajulu Varadarajan1-16/+11
enic_set_coalesce() has two problems. * It should return -EINVAL and not -EOPNOTSUPP for invalid coalesce values. * In case of MSIX, enic_set_coalesce return error after applying requested coalescing setting partially. We should either apply all the setting requeste and return success or apply non and return error. * This patch also simplifies the algo. This was introduced by '7c2ce6e60f703 enic: Add support for adaptive interrupt coalescing' These changes were suggested by Ben Hutchings here http://www.spinics.net/lists/netdev/msg283972.html Also change enic driver version. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-07net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22enic: Add support for adaptive interrupt coalescingSujith Sankar1-6/+55
This patch adds support for adaptive interrupt coalescing. For small pkts with low pkt rate, we can decrease the coalescing interrupt dynamically which decreases the latency. This however increases the cpu utilization. Based on testing with different coal intr and pkt rate we came up with a table(mod_table) with rx_rate and coalescing interrupt value where we get low latency without significant increase in cpu. mod_table table stores the coalescing timer percentage value for different throughputs. Function enic_calc_int_moderation() calculates the desired coalescing intr timer value. This function is called in driver rx napi_poll. The actual value is set by enic_set_int_moderation() which is called when napi_poll is complete. i.e when we unmask the rx intr. Adaptive coal intr is support only when driver is using msix intr. Because intr is not shared. Struct mod_range is used to store only the default adaptive coalescing intr value. Adaptive coal intr calue is calculated by timer = range_start + ((rx_coal->range_end - range_start) * mod_table[index].range_percent / 100); rx_coal->range_end is the rx-usecs-high value set using ethtool. range_start is rx-usecs-low, set using ethtool, if rx_small_pkt_bytes_cnt is greater than 2 * rx_large_pkt_bytes_cnt. i.e small pkts are dominant. Else its rx-usecs-low + 3. Cc: Christian Benvenuti <benve@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25drivers/net: enic: Move ethtool code to a separate fileNeel Patel1-0/+257
This patch moves all enic ethtool hooks from enic_main.c to a new file enic_ethtool.c Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-06 22:14:36 +0300