summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4vf
AgeCommit message (Collapse)AuthorFilesLines
2014-12-09cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addressesHariprasad Shenai3-35/+169
Use BAR2 Going To Sleep (GTS) for T5 and later. Use new BAR2 User Doorbells for T5 for both cxgb4 and cxgb4vf driver. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue RegistersHariprasad Shenai2-1/+105
Add new Common Code facilities for calculating T5 BAR2 Offsets for SGE Queue Registers. This new code can handle situations where Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4vf: Add and initialize some sge params for VF driverHariprasad Shenai3-3/+112
Add sge_vf_eq_qpp and sge_vf_iq_qpp to (struct sge_params), initialize sge_queues_per_page and sge_vf_qpp in t4vf_get_sge_params(), add new t4vf_prep_adapter() which initializes basic adapter parameters. Grab both SGE_EGRESS_QUEUES_PER_PAGE_VF and SGE_INGRESS_QUEUES_PER_PAGE_VF for VF Drivers since we need both to calculate the User Doorbell area offsets for Egress and Ingress Queues. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25cxgb4/cxgb4vf/csiostor: Add T4/T5 PCI ID TableHariprasad Shenai1-61/+12
Add a new file t4_pci_id_tbl.h that contains T4/T5 PCI ID Table so that for all drivers that uses T4/T5 PCI functions changes can be done in one place. checkpatch.pl script reports following error, which if tried to fix ends up in compilation error. ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \ + { 0, } \ + } WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? new file mode 100644 ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_ID_TABLE_FENTRY(devid) \ + CH_PCI_ID_TABLE_ENTRY((devid) | \ + ((CH_PCI_DEVICE_ID_FUNCTION) << 8)), \ + CH_PCI_ID_TABLE_ENTRY((devid) | \ + ((CH_PCI_DEVICE_ID_FUNCTION2) << 8)) ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23RDMA/cxgb4/cxgb4vf/csiostor: Cleanup macros/register defines related to ↵Hariprasad Shenai2-34/+34
PCIE, RSS and FW This patch cleanups all PCIE, RSS & FW related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23cxgb4/cxgb4vf/csiostor: Cleanup macros/register defines related to port and VIHariprasad Shenai1-50/+50
This patch cleanups all port and VI related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23cxgb4/cxgb4vf/csiostor: Cleanup macros/register defines related to queuesHariprasad Shenai2-35/+36
This patch cleanups all queue related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23RDMA/cxgb4/csiostor: Cleansup FW related macros/register defines for PF/VF ↵Hariprasad Shenai2-41/+41
and LDST This patch cleanups PF/VF and LDST related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-47/+127
Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13cxgb4i/cxgb4 : Refactor macros to conform to uniform standardsAnish Bhatt1-1/+1
Refactored all macros used in cxgb4i as part of previously started cxgb4 macro names cleanup. Makes them more uniform and avoids namespace collision. Minor changes in other drivers where required as some of these macros are used by multiple drivers, affected drivers are iw_cxgb4, cxgb4(vf) & csiostor Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12cxgb4/cxgb4vf: Replace __skb_alloc_page with __dev_alloc_pageAlexander Duyck1-3/+4
Drop the bloated use of __skb_alloc_page and replace it with __dev_alloc_page. In addition update the one other spot that is allocating a page so that it allocates with the correct flags. Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4vf: FL Starvation Threshold needs to be larger than the SGE's Egress ↵Hariprasad Shenai3-7/+15
Congestion Threshold Free List Starvation Threshold needs to be larger than the SGE's Egress Congestion Threshold or we'll end up in a mutual stall where the driver waits for Ingress Packets to drive replacing Free List Pointers and the SGE waits for Free List Pointers before pushing Ingress Packets to the host. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4/cxgb4vf: For T5 use Packing and Padding Boundaries for SGE DMA transfersHariprasad Shenai3-2/+53
T5 introduces the ability to have separate Packing and Padding Boundaries for SGE DMA transfers from the chip to Host Memory. This change set takes advantage of that to set up a smaller Padding Boundary to conserve PCI Link and Memory Bandwidth with T5. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4vf: Move fl_starv_thres into adapter->sge data structureHariprasad Shenai2-40/+61
Move fl_starv_thres into adapter->sge data structure since it _could_ be different from adapter to adapter. Also move other per-adapter SGE values which had been treated as driver globals into adapter->sge. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4: Cleanup macros so they follow the same style and look consistent, part 2Hariprasad Shenai3-92/+92
Various patches have ended up changing the style of the symbolic macros/register defines to different style. As a result, the current kernel.org files are a mix of different macro styles. Since this macro/register defines is used by different drivers a few patch series have ended up adding duplicate macro/register define entries with different styles. This makes these register define/macro files a complete mess and we want to make them clean and consistent. This patch cleans up a part of it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29cxgb4vf: Replace repetitive pci device ID's with right onesHariprasad Shenai1-8/+8
Replaced repetive Device ID's which got added in commit b961f9a48844ecf3 ("cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro") Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10cxgb4vf: Add 40G support for cxgb4vf driverHariprasad Shenai3-7/+21
Add 40G support for cxgb4vf driver. ethtool speed values are just numbers of megabits and there is no SPEED_40000 in ethtool speed values. To be consistent, use integer constants directly for all speeds. Use is_x_10g_port()("is 10Gb/s or higher") in cfg_queues() instead of is_10g_port() ("is exactly 10Gb/s"). Else we will end up using a single "Queue Set" on 40Gb/s adapters. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10cxgb4/cxgb4vf: Updated the LSO transfer length in CPL_TX_PKT_LSO for T5Hariprasad Shenai1-1/+4
Update the lso length for T5 adapter and fix PIDX_T5 macro Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29cxgb4/cxgb4vf: Add Devicde ID for two more adapterHariprasad Shenai1-0/+2
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro.Hariprasad Shenai1-52/+52
Remove redundant idx parameter of CH_DEVICE() macro, its always zero. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-11cxgb4/cxgb4vf: Add device ID for new adapter and remove for dbg adapterHariprasad Shenai1-2/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22cxgb4: Free completed tx skbs promptlyHariprasad Shenai1-1/+2
Description of problem: The NIC card is not reporting back to the driver the transmitted skbs, so they get stuck in the TX ring causing issues with reference counters in other kernel components. Developed a new Automatic Egress Queue Update firmware facility to slowly tick through Egress Queues and send back any outstanding CIDX Updates which are laying around. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-06cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown ↵Hariprasad Shenai1-14/+15
routine Need to turn off SGE RX/TX Callback Timers & interrupt in cxgb4vf PCI Shutdown routine in order to prevent crashes during reboot/poweroff when traffic is running. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02cxgb4vf: Adds device ID for few more Chelsio T4 AdaptersHariprasad Shenai1-0/+9
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-4/+5
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-05-14net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12cxgb4vf: Check if rx checksum offload is enabled, while reading hardware ↵Hariprasad Shenai1-3/+4
calculated checksum Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-1/+1
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-29cxgb4vf: Adds device Id for few more Chelsio adaptersHariprasad Shenai1-0/+8
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25cxfb4vf: Call dev_kfree/consume_skb_any instead of [dev_]kfree_skb.Eric W. Biederman1-3/+3
Replace kfree_skb with dev_consume_skb_any in free_tx_desc that can be called in hard irq and other contexts. dev_consume_skb_any is used as this function consumes successfully transmitted skbs. Replace dev_kfree_skb with dev_kfree_skb_any in t4vf_eth_xmit that can be called in hard irq and other contexts, on paths that drop the skb. Replace dev_kfree_skb with dev_consume_skb_any in t4vf_eth_xmit that can be called in hard irq and other contexts, on paths that successfully transmit the skb. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-02-19cxgb4vf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-18/+16
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4vf: Remove superfluous call to pci_disable_msix()Alexander Gordeev1-1/+0
There is no need to call pci_disable_msix() in case the previous call to pci_enable_msix() failed Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-23cxgb4: make functions static and remove dead codestephen hemminger2-3/+2
Cleanup by making local functions static. The code to load config file is unreachable in net-next, probably came from some out of tree driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-04cxgb4vf: added much cleaner implementation of is_t4()Hariprasad Shenai5-16/+30
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22net: cxgb4vf: use DEFINE_PCI_DEVICE_TABLEJingoo Han1-1/+1
This macro is used to create a struct pci_device_id array. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18net: cxgb4vf: remove unnecessary pci_set_drvdata()Jingoo Han1-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: cxgb4vf: Staticize local symbolsSachin Kamat1-5/+6
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29cxgb4vf: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSGVipul Pandya1-0/+25
Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a CPL_FW4_MSG as follows flit0 rss_header (if DropRSS == 0 in IQ context) flit1 CPL_FW4_MSG cpl flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE flit3 CPL_SGE_EGR_UPDATE cpl So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle both. This patch also writes a new parameter to firmware requesting encapsulated EGR_UPDATE. This allows firmware with this support to not break older drivers. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy1-2/+3
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-7/+8
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4vf: Add support for Chelsio T5 adapterSantosh Rastapur5-9/+73
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13cxgb4vf: Fix VLAN extraction counter incrementVipul Pandya1-1/+3
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-09cxgb4vf: Fix extraction of cpl_rx_pkt from the response queue descriptorVipul Pandya1-1/+1
This was preventing GRO and RxCheckSum offload to happen. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-09remove init of dev->perm_addr in driversJiri Pirko1-1/+0
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08chelsio: Use netdev_<level> and pr_<level>Joe Perches1-15/+8
Use more current logging styles. Convert printks to pr_<level> and printks with ("%s: ...", dev->name to netdev_<level>(dev, "... Add pr_fmt #defines where appropriate. Coalesce formats. Use pr_<level>_once where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-4/+4
Pull first round of SCSI updates from James Bottomley: "This patch set includes two large new drivers: mpt3sas (for the next gen fusion SAS hardware) and csiostor a FCoE offload driver for the Chelsio converged network cards (this includes some net changes which I've OK'd with DaveM). The rest of the patch is driver updates (qla2xxx, lpfc, hptiop, be2iscsi) plus a few assorted updates and bug fixes. We also have a Power Management rework in the Upper Layer Drivers preparatory to doing ACPI zero power optical devices, but the actual enabler is still being worked on. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (72 commits) [SCSI] mpt3sas: add new driver supporting 12GB SAS [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas [SCSI] miscdevice: Adding support for MPT3SAS_MINOR(222) [SCSI] csiostor: remove unneeded memset() [SCSI] csiostor: Fix sparse warnings. [SCSI] qla2xxx: Display that driver is operating in legacy interrupt mode. [SCSI] qla2xxx: Dont clear drv active on iospace config failure. [SCSI] qla2xxx: Fix typo in qla2xxx driver. [SCSI] qla2xxx: Update ql2xextended_error_logging parameter description with new option. [SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport. [SCSI] qla2xxx: Add 16Gb/s case to get port speed capability. [SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed. [SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset. [SCSI] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set. [SCSI] qla2xxx: Fix typo in qla83xx_fw_dump function. [SCSI] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message. [SCSI] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing [SCSI] qla2xxx: Move noisy Start scsi failed messages to verbose logging level. [SCSI] qla2xxx: Fix coccinelle warnings in qla2x00_relogin. [SCSI] qla2xxx: No fcport FC-4 type assignment in GA_NXT response. ...
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman2-3/+2
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03cxgb4vf: remove __dev* attributesBill Pemberton3-15/+15
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27[SCSI] cxgb4/cxgb4vf: Chelsio FCoE offload driver submission (common header ↵Naresh Kumar Inna1-4/+4
updates). This patch contains updates to firmware/hardware header files shared between csiostor and cxgb4/cxgb4vf, and the resulting changes to the cxgb4/cxgb4vf source files. Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 07:58:37 +0300